1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Thread of New Knives Updated Daily

Liu Kang Feb 13, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Hairy Carry .14" Flat Ground Black Digicam Cerakoted Blade, Textured Handle (1 OF 6)
    3.5" Blade Length 8.2" Overall Length .14" Blade Thickness 5.7 Ounces
    Flat Ground 154CM Blade w/Swedge with a V-Ground Edge
    Textured Handle (underneath the coating can be either Canvas Micarta or G10)
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only 6 made in this color combination so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore!

    This was a 6 of these in this color made for the Blade 2015 Show. I purchased this knife directly from the Busse Combat in Atlanta Ga. This has a flat ground 154CM .14" thick with a Black Digicam Cerakote coated Finish! The V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. The Cerakote coats not only the blade but the Textured Canvas Micarta Handles and protects it. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! I purchased this directly from Swamp Rat Knife Works. This is Brand New: Never used, carried or sharpened.
    $305
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop ASH1 .22" Flat Ground Satin Blade, Black G10 G-rexed Natural Mammoth Tooth Handle and finished it all of with Mosaic Pins & Red Liners
    Anniversary Steel Heart 1 - ASH1
    6.4" Blade Length 12" Overall Length 1.85" Blade Width .22" Blade Thickness 17.5 Ounces
    Flat Ground Hand Finished Satin Blade with a Blended Convexed Edge
    Custom Hand Smoothed Black G10 G-rexed Natural Mammoth Tooth Handle and finished it all of with Mosaic Pins & Red Liners
    INFI Blade Steel, Large Choil
    This is Brand New from a private collection but was purchased directly from Busse Combat from the 2011 Spring Knob Creek Show in KY. The ASH1 is no longer available for sale through the Busse Combat website because it has been Discontinued!

    Jerry Busse introduced the Anniversary Steel Heart 1 in 2007 and this model has long been discontinued and one of everyone's favorite! Every true Busse collector should have at least one ASH1 in his/her collection. And it won't get any nicer than this one. The Anniversary Steel Heart 1 in a with a .22" thick were used to make the Limited Edition, Special Edition and a few Custom Shop knives like this one! The Custom Shop must have had a few leftover blanks and went all out on this one for the 2011 Spring Knob Creek Show in KY. This has a Flat Ground Hand Finished Satin Blade with a Blended Convexed Edge. But for the handle, they went all out and spared no expense. They went with a Black G10 G-rexed Natural Mammoth Tooth Handle and finished it all of with Mosaic Pins & Red Liners. The Red Liners really makes the handles pop! This has the round Busse Custom Shop logo which is no longer used. This is Brand New, Never Used, Carried or Sharpened!
    $1600
     
    Last edited: Sep 11, 2021
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop ASH1 .22" Saber Ground Satin Blade, Black G10 G-rexed Giraffe Bone Bolstered Split Curly Oak Handle w/Mosaic Pins
    Anniversary Steel Heart 1 - ASH1
    6.4" Blade Length 11.9" Overall Length 1.85" Blade Width .22" Blade Thickness 16.9 Ounces
    Saber Ground Hand Finished SatinBlade with a V-Ground Edge
    Custom Hand Smooth Black G10 G-rexed Giraffe Bone Bolstered Split Curly Oak Handle w/Mosaic Pins
    INFI Blade Steel, Choil and Swedge
    This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta Ga. The ASH1 is no longer available for sale through the Busse Combat website because it has been Discontinued!

    Jerry Busse introduced the ASH1 in 2007 and has long since been discontinued. But at that time, all of the ASH1 that were in .22" Blade thickness were all flat ground and were never any available with a saber ground blade. This one was Hand made by the Busse Custom Shop and brought to the 2016 Blade Show! This is the first one and only one I have ever seen like this. The Busse Custom Shop went all out on this set of custom handle. They put a lot of time, thought and work into this set of Black G10 G-rexed Giraffe Bone Bolstered Split Curly Oak Handle finished off with Mosaic Pins. There are two different types and colors of Curly Oak wood handles. INFI is a proprietary Steel is used only by Busse Combat knives. This knife will carry a lifetime warranty from Busse Combat! This one is new and a Super rare Find because this was never offered when it was in production! Never Used, Carried or Sharpened!
    $1250
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Rodent 4 Flat Ground .19" Sage American Flag Cerakoted Blade, Textured Canvas Micarta Handle (1 OF 6)
    4.5" Blade Length 9.9" Overall Length .19" Thick 8.21 Ounces
    Saber Ground age American Flag Cerakoted SR101 Blade with V-grind edge.
    Textured Canvas Micarta Handle
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only Six made so this one is super rare and will never be done again!

    This Swamp Rat Rodent 4 has a special Sage American Flag Cerakoted blade which has a .19" Blade thickness! The Cerakote coats not only the blade but the Magnum Canvas Micarta Handles and protects it. The handle material is either canvas micarta or G10 but is unknown because it is coated but either way, it also is covered with the lifetime warranty. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! This knife will carry a lifetime warranty from Swamp Rat Knives Works! This one is new and a RARE Super Find Because they only made 6 in this color combination. This is Brand New, never used, carried or sharpened.
    $270
     
    Last edited: Sep 12, 2021
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat S.C.A.B.S. Small Choil Anorexic Boss Street .155" Convexed Satin Blade, Textured Red Tequila G10 Handle
    SCABS - Small Choil Anorexic Boss Street
    4.25" Blade Length 9.05" Overall Length 1.1" Blade Width .155" Blade Thickness 6.6 Ounces
    Full Height Convexed Hand Finished Satin Blade with a Convexed Edge
    Custom Textured Red Tequila G10 Handle
    Nuclear Meltdown treatment on the spine and handles, INFI Blade Steel, Small Choil
    This is Brand New purchased directly from Busse Combat at the 2014 Blade Show in Atlanta Ga. The Anorexic Boss Street has long been discontinued and is no longer being made so get this while you can!

    The Anorexic Boss Street were introduced in 2010 by Jerry Busse and have long since been discontinued! I purchased this knife directly from Busse Combat this is Brand New from my personal collection that was kept as a safe queen. This has a INFI Steel that is .155" thick with a Full Height Convexed Hand Finished Satin Blade with a Convexed Edge which is Razor Sharp! The Small Choil Anorexic Boss Street NEVER came with this handle as they were all Black Paper Dimple and were only available on as the Limited Edition and all had a number on the blade. The Busse Custom Shop stole these handles from the Boss Jack Prototype knives as you can see from the patterns. Not many were produced! I purchased this directly from Busse Combat and it was never used, carried or sharpened! These were never made as a production with these colors and textured handle pattern and that is why it says Custom on the blade.

    $770
     
    Last edited: Nov 27, 2021 at 10:45 PM
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Scrap Yard Knife Company 311 Black Digicam Cerakoted .19" Saber Ground Blade, Black Resiprene C Handle (1 of 10)
    3.5" Blade 7.85" Overall Length 1.12" Blade Width .19" Blade Thickness 4.95 Ounces
    Flat Ground Saber Ground Black Digicam Cerakoted Blade with V-Ground Edge
    Black Resiprene C Handle
    SR101 Blade Steel, Small Choil
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show!

    The Scrap Yard Knife Company 311 is a Super Little knife for a Great Price. This is made by Scrap Yard Knife Company which is the sister company of the Busse Combat. This is an Exclusive for ONLY the 2015 Blade Show and only 10 in this color combination were ever made. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives will never do it again, so get this while you can! This knife was made for hard use and has a nice Resiprene C Handle which has a great non slip softer grip so you don't lose the grip when this is in use. This knife will carry a lifetime warranty from Scrap Yard Knife Company! This one is was purchased by me directly from Busse Combat at the Blade 2015 Show. This is Brand New: Never Used, Carried or Sharpened!

    $200
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Ernest Emerson Prototype CQC7 Karambit SpecWar PROTOTYPE Black G10

    Blade Length: 2.7″
    Handle Length: 4.65"
    Overall Length: 7.25"
    Blade Thickness: .125"
    Hardness 57-59 RC
    Blade Steel: 154-CM
    Handle: Titanium/Stainless Steel Liners with Textured Black G10 Handle Scale
    Weight: 3.6 Ounces

    "The Emerson Karambit brings you the first in the next generation of folding knives. With the advantage of the Emerson “wave shaped feature”, this is one of the finest personal defense weapons ever developed. Nothing screams “Tactical Knife” more than the Emerson Karambit. Each folding Karambit is pre-drilled and tapped for both right-handed and left-handed carry so that you can carry it whichever way is more comfortable for your needs."

    Here is an original Ernest Emerson Custom Hand Ground CQC7 Karambit that I was told was an original prototype even though it's not labeled. Either way, it's one sweet custom and you can tell it's an older model by the box and the backspacer. This comes with the original box marked "CQC7 Karambit Custom", baggie, Emerson pamphlet, extremely sharp warning paper, and a Combat Karambit postcard. This one is Brand New: never used, carried or sharpened. This knife is from a private knife collction where it was kept as a safe queen. This is a beautiful knife so here is your own chance to own a piece of Emerson History.
    $1300
     
    Last edited: Oct 27, 2021
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Scrap Yard Knife Company 311 Sage Digicam Cerakoted .19" Saber Ground Blade, Tan Resiprene C Handle (1 of 10)
    3.5" Blade 7.85" Overall Length 1.12" Blade Width .19" Blade Thickness 4.95 Ounces
    Flat Ground Saber Ground Sage Digicam Cerakoted Blade with V-Ground Edge
    Tan Resiprene C Handle
    SR101 Blade Steel, Small Choil
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show!

    The Scrap Yard Knife Company 311 is a Super Little knife for a Great Price. This is made by Scrap Yard Knife Company which is the sister company of the Busse Combat. This is an Exclusive for ONLY the 2015 Blade Show and only 10 in this color combination were ever made. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives will never do it again, so get this while you can! This knife was made for hard use and has a nice Resiprene C Handle which has a great non slip softer grip so you don't lose the grip when this is in use. This knife will carry a lifetime warranty from Scrap Yard Knife Company! This one is was purchased by me directly from Busse Combat at the Blade 2015 Show. This is Brand New: Never Used, Carried or Sharpened!

    $200
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Forsaken Team Gemini .225" Nuclear Option Hammered/Competition Finish Blade w/fuller & CBTs, Black G10 G-rexed Fern Wood Handle w/ German Nickle Silver Tubes and Orange Liners
    TG - Team Gemini
    8.15" Blade Length 13.5" Overall Length 1.55" Blade Width .225" Blade Thickness 18.7 Ounces
    Saber Ground Nuclear Option Competition Hammered/Competition Blade w/fuller and Corrugated Bevel Tech (CBT) with a V-Ground Edge
    Custom Hand Smoothed Black G10 G-rexed Fern Wood Handle w/ German Nickle Silver Tubes and Orange Liners
    INFI Blade Steel, Full Size Choil, Fuller (Blood Groove), Corrugated Bevel Tech (CBT), Swedge
    This is Brand New purchased directly from Busse Combat. The Forsaken Team Gemini can no longer be order from the Busse Company because it's Sold Out, and has been Discontinued!

    These Forsaken Team Gemini were introduced by Jerry Busse in March of 2018 and have long been discontinued. The Team Gemini was made famous by the TV Series The Walking Dead where it was carried by the character Daryl Dixon and used to dispatch herds of zombies. It was made legendary by its use in military campaigns around the world. Well to improve on it would be hard but Jerry did it. He added the Corrugated Bevel Tech (CBT) to the Blade along with a Swedge and Fuller. Options for the Blade finish was either the Competition Finish or a coated blade. This is knife had neither of those and is a custom Hammered/Competition finished Blade. The Flats are custom Hammered and the where you can't get to it which would be the Fuller (Blood Groove) and the CBT, it looks like it was bead blasted. This is a finish you can't order. Well, the Busse Custom Shop got a hold of one of these blanks that was left over went all out and created this custom piece. This knife has the Nuclear Options which includes: Handworked Flats, Custom Handles, and Extra attention to the outer perimeter finish. For the handles, the Crab Shack went all out on this knife and went with a Custom Hand Smoothed Black G10 G-rexed Fern Wood Handle finished with German Nickle Silver Tubes filled with Orange Resin and Orange Liners. The Fernwood is a Beautiful but rare handle scale to come by as it is from New Zealand. This is a true Custom and very RARE knife made by the Busse Custom shop! This is a One of a Kind and something like this is not available to be ordered. This is Brand New: Dead Mint never used, carried or sharpened.

    $1400
     
    Last edited: Oct 18, 2021
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Rodent 4 Flat Ground .19" Red & Black Cerakoted Blade, Textured Handle (1 OF 6)
    Rodent 4 - R4
    4.5" Blade Length 9.9" Overall Length .19" Thick 8.21 Ounces
    Saber Ground Red & Black Cerakoted SR101 Blade with V-grind edge
    Textured Handle (underneath the coating can be either Canvas Micarta or G10)
    SR101 Blade Steel, Choil
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only Six made so this one is super rare and will never be done again! The Rodent 4 - R4 model has long since discontinued so get this now while you still can.

    This Swamp Rat Rodent 4 has a special Red & Black Cerakoted blade which has a .19" Blade thickness! The Cerakote coats not only the blade but the Magnum Canvas Micarta Handles and protects it. The handle material is either canvas micarta or G10 but is unknown because it is coated but either way, it also is covered with the lifetime warranty. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! This knife will carry a lifetime warranty from Swamp Rat Knives Works! This one is new and a RARE Super Find Because they only made 6 in this color combination. Brand New, Never Used, Carried or Sharpened!

    $270
     
    Last edited: Sep 12, 2021
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat FMV8 .265" Saber Ground Olive Drab w/Black Tiger Stripes Cerakoted w/CBT's, Magnum Textured Handle
    Force Multiplier V8 - FMV8
    8.15" Blade Length 13.25" Overall Length 1.35" Blade Width .255" Blade Thickness 14.75 Ounces
    Double Edged Saber Ground Olive Drab w/Black Tiger Stripes Camouflage Cerakoted Coated w/CBT (Corrugated Bevel Technology) and V-Ground Edge
    Magnum Textured Handle (underneath the coating can be either Canvas Micarta or G10)
    INFI Blade Steel, two smaller choils, CBT (Corrugated Bevel Technology) and Skull Crusher This one is Brand New purchased directly from Busse Combat! The Force Multiplier V8 have been Sold out and discontinued!

    The Force Multiplier V8 was introduced in January of 2018 and here is what he say about it:

    The Force Multiplier V8 (FMV8) has been designed for the rigors of heavy combat and features an 8" blade with our patented Corrugated Bevel Technology. This design is by far the "Baddest of the Bad" in the land of daggers, with lines that flow so freely that the FMV8 looks to be in motion even while sitting still. From the Crusader inspired pommel to the tip of the 8 inch blade, the FMV8 is designed specifically for self defense applications.

    Busse Combat finally made what I've been waiting so long for, a medium sized Dagger without a coating. This is a true Double Edged Dagger with a fuller down the middle. The Bevel is Corrugated Bevel Technology (CBT) with a V-Ground Edge. This has a Competition Blade underneath the underneath the coating, the handle can be either Canvas Micarta or G10. The actual handle material is unknown can be either canvas micarta or G10, and because it is coated, is not known but will still have the lifetime guarantee. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. I believe there were only a few of these FMV8 blanks left and they were sent out and only one were coated in each of the different colored cerakoted colors. This one is the made with the Saber Ground Olive Drab w/Black Tiger Stripes Camouflage Cerakoted color and the only one I have seen in this color. This has a Magnum Textured Handle. This may be a One of a Kind and something like this is not available to be ordered. This is Brand New: Dead Mint never used, carried or sharpened.

    $900
     
    Last edited: Nov 10, 2021
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Active Duty .185" Saber Ground Tanker Grey Blade, Textured Black/Green G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.4 Ounces
    Saber Ground Tanker Grey Coated Blade with a V-Ground Edge
    Textured Black/Green G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is like New, never used, carried or sharpened.
    $240
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Active Duty .185" Saber Ground Tanker Grey Blade, Textured Blue/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.2 Ounces
    Saber Ground Tanker Grey Coated Blade with a V-Ground Edge
    Textured Blue/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!

    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is like New, never used, carried or sharpened.
    $240
     
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Active Duty .19" Saber Black Crinkle Blade, Textured Blue/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .19" Blade Thickness 6.2 Ounces
    Saber Ground Black Crinkle Coated Blade with a V-Ground Edge
    Textured Blue/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is like New, never used, carried or sharpened.
    $240
     
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Active Duty .19" Saber Ground Black Crinkle Blade, Textured Black/Green G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.4 Ounces
    Saber Ground Black Crinkle Coated Blade with a V-Ground Edge
    Textured Black/Green G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is like New, never used, carried or sharpened.
    $240
     
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Active Duty .195" Saber Ground Black Crinkle Blade, Textured Black/Tan G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.3 Ounces
    Saber Ground Black Crinkle Coated Blade with a V-Ground Edge
    Textured Black/Tan G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!

    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is like New, never used, carried or sharpened.

    $250
     
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Active Duty .195" Saber Ground Black Crinkle Blade, Textured Orange/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .195" Blade Thickness 6.3 Ounces
    Saber Ground Black Crinkle Coated Blade with a V-Ground Edge
    Textured Orange/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is like New, never used, carried or sharpened.
    $240
     
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CS487 Busse Combat Custom S.L.U.T. Active Duty .22" Deep Hollow Satin Blade, Full Fossil Bark w/Natural Cracks, Black Canvas Micarta Liners & Mosaic Pins
    Active Duty S.L.U.T. Super Lightweight Ultra Thick
    3.55" Blade Length 7.8" Overall Length 1.05" Blade Width .22" Blade Thickness 5.7 Ounces
    Hand Ground Full Height Deep Hollow Ground Satin Finished Blade with V-Ground Edge
    Custom Hand Smoothed Full Fossil Bark w/Natural Cracks, Black Canvas Micarta Liners & Mosaic Pins
    INFI Blade Steel, Small Choil, Skeletonized Handle
    This is Brand New directly from Busse Combat and has been in personal collection ever since. The Active Duty have long since been discontinued and have been Sold out so get this now while you can!

    The Active Duty S.L.U.T.- Super Lightweight Ultra Thick was introduced at the 2011 at a the A.G. Russell Knife Show and a handful were made for one Ganza. It has never been made again so will be very hard to get. These were only available with canvas micarta or G10 handles when you can order them in the Ganza. So this one is very special and you can see by the pictures there was a lot of time and work that went into the making of this knife! It has a Deep Hollow ground and this one weights 4.1 Ounces. This has an incredible feel in the hand because of the thickness of the blade compared to the super sharp deep hollow grind! The particular knife was purchased by me directly from Busse Combat and is from my own personal collection. Completely one of a kind with custom Fossil Bark Handles finished off with Mosaic Pins. This is Brand New, never used, carried or sharpened. This is Brand New, never used, carried or sharpened and comes from my own personal collection.

    $1800
     
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Active Duty .16" Saber Ground Satin Blade, Full White Bone Handle w/Red Liners & Mosaic Pins
    Active Duty - AD
    3.6" Blade Length 7.85" Overall Length 1.1" Blade Width .16" Blade Thickness 5.8 Ounces
    Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Smooth Full White Bone Handle w/Red Liners & Mosaic Pins
    INFI Blade Steel with Small Choil
    This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta Ga. The Active Duty is no longer available for sale through the Busse Combat website because it's Sold Out, which probably means it had been Discontinued!

    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for Knife Shows. I purchased this Custom Shop knife directly from Busse Combat the 2016 Blade Show in Atlanta Ga. This has a INFI Steel that is .16" thick with a Satin Finish done by hand! The handle is Custom Hand Smooth Full White Bone Handle finished off with Red Liners & Mosaic Pins! This is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.

    $530
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,300
    101
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, Full Orange Giraffe Bone Handle w/Mosaic Pins & Orange Liners
    Active Duty - AD
    3.6" Blade Length 7.85" Overall Length 1.1" Blade Width .165" Blade Thickness 5.6 Ounces
    Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Smooth Full Orange Giraffe Bone Handle w/Mosaic Pins & Orange Liners
    INFI Blade Steel with Small Choil
    This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta Ga. The Active Duty is no longer available for sale through the Busse Combat website because it's Sold Out, which probably means it had been Discontinued!

    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for Knife Shows. I purchased this Custom Shop knife directly from Busse Combat the 2016 Blade Show in Atlanta Ga. This has a INFI Steel that is .16" thick with a Satin Finish done by hand! The handle is Custom Hand Smooth Full Orange Giraffe Bone Handle finished off with Mosaic Pins & Orange Liners! This is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.

    $450
     

Share This Page