1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Thread of New Knives Updated Daily

Liu Kang Feb 13, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    2002 Busse Combat Custom Shop Active Duty .15" Saber Ground Doublecut Blade, Textured Green Linen Micarta Handle
    Active Duty - AD
    3.35" Blade Length 7.7" Overall Length 1" Blade Width .15" Blade Thickness 4.9 Ounces
    Saber Ground Doublecut (bead blasted) Finished Blade with a V-Ground Edge
    Old School Textured Green Linen Micarta Handle
    INFI Blade Steel, Small Choil, Busse Custom Shop Logo
    This is Brand New directly from a private collection. The Active Duty has been discontinued by Busse Combat and now now long available and can no longer be ordered so get this before it's gone!

    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these made by Busse Combat Custom Shop in 2002. This has a Saber Ground Doublecut (bead blasted) Blade with a V-Ground Edge which is Razor Sharp. What makes this knife very rare is that they used Old School Textured Green Linen Micarta Handle for the Handle and Busse nor any other company has been able to re-make that same handle again. Most Busse Collectors appreciate this old style knife and handle as fewer of them exist and impossible to find. This is about as good of a condition as you are ever going to find as it was a safe queen. This is Brand New, never used, carried or sharpened.

    $525
     
    Last edited: Dec 4, 2017
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    2007 Busse Combat Custom Shop FFBM .29" Flat Saber Ground Satin Blade, Tan Canvas G-rexed Lacewood Bolstered Birdseye Maple Wood Handle w/Mosaic Pins
    Fat Fusion Battle Mistress - FFBM
    10" Blade Length 16.25" Overall Length 2" Blade Width .29" Blade Thickness 31.1 Ounces
    Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Smooth Tan Canvas Micarta G-rexed Lacewood Bolstered Birdseye Maple Wood Handle w/Mosaic Pins
    INFI Blade Steel, Full Size Choil, Pentrator Tip, Busse Custom Shop Logo
    This is Brand New and comes from my personal Collection. These Fat Fusion Battle Mistress - FFBM have been discontinued and have been Sold out since about 2007 so get this now while you can!

    The Combat Grade Fusion Battle Mistress was introduced by Jerry Busse in 2006 and has long been since discontinued. At that time, the FFBM was sold in certain specific color combinations only and only through the Busse Company Store! I believe the FFBM is the knife that really got Busse to where it is today. I believe when the FFBM was released in 2007, Noss decided to test this knife on knifetest.com and the results were incredible and blew everyone away surpassing all test with flying colors and since than, everyone from around the world has wanted to own a FFBM! This knife started out as a Combat Grade Fat Fusion Battle Mistress - FFBM! I really loved this model but I have a thing for Satin Busse knives with "One of a Kind Custom Handles" so I sent this in to the Busse Custom Shop many years ago. The Busse Custom Shop started by taking off the old handles and stripped the coating off the knife. They smoothed out and re-finished to a Hand Finished Satin and put a new "Busse Custom Shop" logo on the blade. This still retains the factory Pentrator Tip! Then Busse Custom shop than went all out on the handle and chose to go with a Custom Hand Smooth Tan Canvas Micarta G-rexed Lacewood Bolstered Birdseye Maple Wood Handle finished off with Mosaic Pins. This is a True Grail for any Busse Knife Collector or HOG! The V-Ground Edge is still razor sharp. This was in my own personal collection! You can tell a lot of planning, thought and work went into this beautiful knife. This is Brand New: Never Used, Carried or Sharpened!

    $2020
     
    Last edited: Dec 29, 2017
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Argonne Attack .22" Convexed Satin Blade, Hand Smoothed Green Canvas Micarta G-rexed Maple Burl Handle w/Solid Brass Bolts & Green Liners
    Argonne Attack - AA
    9.7" Blade Length 15.65" Overall Length 1.75" Blade Width .22" Blade Thickness 19.7 Ounces
    Full Height Convexed Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Smoothed Green Canvas Micarta G-rexed Maple Burl Handle w/Solid Brass Bolts & Green Liners
    INFI Blade Steel at 58-60Rc with Choil, Single Edged, No Knuckle Guard but with Finger Grooves
    The Argonne Attack Combat Grade Model was available for sale starting January 20, 2016 through January 25, 2016 and has been discontinued so can no longer be order from the Busse Combat!

    Jerry Busse introduced the Argonne Attack CG in 2015 and this model has long been discontinued. This model is based off of the Argonne Assault Light Brigade but since that one had the Knuckle Guard and a second sharpened edge on the top spine, it was not legal in all the States within the US and could not be exported to outside the US. The Argonne Assault Light Brigade also has a sharpened middle spine so that was considered double edge and also not legal in most places. So this Argonne Attack was introduced to everyone that loves that design but couldn't have that knife based on where they lived. The removal of the knuckles but left the finger grooves so insure a sure non slip grip. They also removed the sharpened middle spine. These were only available in Combat Grade or for those that don't know, it only was available with a coated blade. Now this knife is a complete "One of a Kind" full blown custom with a Full Height Convexed Blade with a V-Ground edge. This grind or the Hand finished Satin Blade was never made before for this model. The Busse Custom Shop went all out on the handle and went went a Custom Hand Smoothed Green Canvas Micarta G-rexed Maple Burl Handle finished off with Solid Brass Bolts & Green Liners. The Combat Grade (coated) were only available for two weeks and was only available to be ordered with a coated blade so there are not many of those around either. This uses the infamous INFI Blade steel which is a proprietary Steel is used only by Busse Combat knives. You will never see anther one like this so get this while you can. This is Brand New, never used, carried or sharpened.

    $2500
     
    Last edited: Dec 7, 2019
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Camp Cleaver .323" Saber Ground Satin Blade, Hand Smoothed/Shaped Desert Sandstorm G10 G-rexed Grapevine in Resin Handle w/Mosaic Pins
    Camp Cleaver - CC
    5.55" Blade Length 10.75" Overall Length 3" Blade Width .323" Blade Thickness 30.2 Ounces
    Flat Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smoothed/Shaped Desert Sandstorm G10 G-rexed Grapevine in Resin Handle w/Mosaic Pins
    INFI Blade Steel, Talon Hole
    This is Brand New purchased directly from Busse Combat Custom Shop. The Camp Cleaver Model was a part of "Operation Two Weeks" and available for sale starting March 20, 2016 through March 23, 2016 and has been discontinued so can no longer be order from the Busse Company Website! The Camp Cleaver is no longer available for sale through the Busse Combat because it's Sold Out, which means it had been Discontinued!

    Garth Reckner introduced the Camp Cleaver in April of 2016 and this model has long been discontinued. He described this knife as:
    The Camp Cleaver is designed for a variety of chores where bone crushing strength is needed in a compact package.
    Not many words needed for this one, it's thick at .323" thick and being about 3" wide and only 10.75" overall length, 29.2 ounces is quite a bit of weight for such a short chopper! This is an Extremely Rare one as it is a custom from the Busse Custom Shop! I purchased this knife directly from Busse Combat so in Brand New Dead Mint Condition. This has a thick INFI Steel blade that is .32" Thick with a Hand Finished Satin INFI Blade and V-Ground Edge which is Razor Sharp. The Busse Custom Shop went all out on the handle and did a Custom Hand Smoothed/Shaped Desert Sandstorm G10 G-rexed Grapevine in Resin Handle finished off with Mosaic Pins. The handle have a matched set of beautiful Grapevine scales set in a dark red resin in color. These match perfectly as the tan in the Desert Sandstorm G10 go perfectly with the tan in the Grapevine. You can tell a lot of thought, planning and work went into this knife! Because of the thickness of the scales/handles along with the blade thickness, this is a thick handle and not a light blade in any way. I'm sure you can use this to do much more than your average butcher meat cutting! This is one of those knives you have to really feel/weight of it in your hands to appreciate. This is Brand New, never used, carried or sharpened. This knife is still in the original condition and has not been altered in any way.

    $1700
     
    Last edited: May 8, 2018
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat MOABOLO .365" Tanker Grey Blade w/CBT, Magnum Textured Black/Tan G10 Handle
    MOABOLO - Mother of all BOLO
    12.1" Blade Length 18.35" Overall Length 2.2" Blade Width (widest point) .365" Blade Thickness 36.1 Ounces
    Tanker Grey Coated Flat Ground Blade with a V-Ground Edge
    Magnum Textured Black/Tan G10 Handle
    INFI Blade Steel, Full size Choil with a Swedge
    This is Brand New purchased directly from Busse Combat at the 2015 Fall Knob Creek Show in KY. I only have this one in this color so get this while you can before this is sold, because I can't get any more. The MOABOLO is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The MOABOLO was first available at the 2015 Blade Show in Atlanta Ga for sale from Busse Combat. This knife is a combination of the MOAB (Mother of all Steel Hearts) and the Bolo style knife. This is a very Limited Model made by Busse Combat Custom Shop and was only available at knife shows Busse Attended or online Ganza. As if there weren't made, some didn't have the CBT (Corrugated Bevel Technology.) and some did. We do not know if Busse will ever make these monsters anymore so get this very limited Chopper while you can! The V-Grind Edge is Razor Sharp so very scary with so much weight and size behind it! This one has the Tanker Grey coated Blade, which matches the Black & Tan G10 Handle very well! The handle is Magnum Textured Black & Tan G10 Handle so it's strong and grips well for large hands and Black goes with everything. This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat at the 2015 Fall Knob Creek Show! This has a INFI Steel that is .365" thick with a Tanker Grey Coated Blade! This is one monster of a chopper, with this being so thick and long, this is one large and heavy Chopper! This is Brand New, never used, carried or sharpened.
    $1625
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Argonne Attack CG .24" Saber Ground Black Crinkle Blade, Textured Red/Black G10 Handle
    Argonne Attack Combat Grade - AACG
    9.8" Blade Length 15.85" Overall Length 1.8" Blade Width .24" Blade Thickness 20.9 Ounces
    Black Crinkle Coated Saber Ground Blade with V-Ground Edge
    Textured Red/Black G10 Handle
    INFI Blade Steel at 58-60Rc with Choil, Single Edged, No Knuckle Guard but with Finger Grooves
    This Model was available for sale starting January 20, 2016 through January 25, 2016 and has been discontinued so can no longer be order from the Busse Combat!

    Jerry Busse introduced the Argonne Attack CG in 2015 and this model has long been discontinued. This ones comes from the Argonne Assault Light Brigade but since that one had the Knuckle Guard and a second sharpened edge on the top spine, it was not legal in all the States within the US and could not be exported to outside the US. The Argonne Assault Light Brigade also has a sharpened middle spine so that was considered double edge and also not legal in most places. So this Argonne Attack was introduced to everyone that loves that design but couldn't have that knife based on where they lived. The removal of the knuckles but left the finger grooves so insure a sure non slip grip. They also removed the sharpened middle spine. These were only available in Combat Grade or for those that don't know, it only was available with a coated blade. These were only available for two weeks and was only available to be ordered with a coated blade. This uses the infamous INFI Blade steel which is a proprietary Steel is used only by Busse Combat knives. This was part of "Operation 2 Weeks!" Get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for two weeks and than discontinued. This is Brand New, never used, carried or sharpened.

    $700
     
    Last edited: Oct 5, 2017
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Argonne Attack CG .235" Saber Ground Tanker Grey Blade, Textured Tan Canvas Micarta Handle
    Argonne Attack Combat Grade - AACG9.8" Blade Length 15.85" Overall Length 1.8" Blade Width .235" Blade Thickness 19.9 Ounces
    Tanker Grey Coated Saber Ground Blade with V-Ground EdgeTextured Tan Canvas Micarta HandleINFI Blade Steel at 58-60Rc with Choil, Single Edged, No Knuckle Guard but with Finger Grooves
    This Model was available for sale starting January 20, 2016 through January 25, 2016 and has been discontinued so can no longer be order from the Busse Combat!

    Jerry Busse introduced the Argonne Attack CG in 2015 and this model has long been discontinued. This ones comes from the Argonne Assault Light Brigade but since that one had the Knuckle Guard and a second sharpened edge on the top spine, it was not legal in all the States within the US and could not be exported to outside the US. The Argonne Assault Light Brigade also has a sharpened middle spine so that was considered double edge and also not legal in most places. So this Argonne Attack was introduced to everyone that loves that design but couldn't have that knife based on where they lived. The removal of the knuckles but left the finger grooves so insure a sure non slip grip. They also removed the sharpened middle spine. These were only available in Combat Grade or for those that don't know, it only was available with a coated blade. These were only available for two weeks and was only available to be ordered with a coated blade. This uses the infamous INFI Blade steel which is a proprietary Steel is used only by Busse Combat knives. This was part of "Operation 2 Weeks!" Get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for two weeks and than discontinued. This is Brand New, never used, carried or sharpened.
    $680
     
    Last edited: Oct 5, 2017
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Argonne Attack CG .24" Saber Ground Hammered Silver Coated Blade, Textured Black Canvas Micarta Handle
    Argonne Attack Combat Grade - AACG9.8" Blade Length 15.85" Overall Length 1.8" Blade Width .24" Blade Thickness 19.8 Ounces
    Hammered Silver Coated Coated Saber Ground Blade with V-Ground EdgeTextured Black Canvas Micarta HandleINFI Blade Steel at 58-60Rc with Choil, Single Edged, No Knuckle Guard but with Finger Grooves
    This Model was available for sale starting January 20, 2016 through January 25, 2016 and has been discontinued so can no longer be order from the Busse Combat!
    Jerry Busse introduced the Argonne Attack CG in 2015 and this model has long been discontinued. This ones comes from the Argonne Assault Light Brigade but since that one had the Knuckle Guard and a second sharpened edge on the top spine, it was not legal in all the States within the US and could not be exported to outside the US. The Argonne Assault Light Brigade also has a sharpened middle spine so that was considered double edge and also not legal in most places. So this Argonne Attack was introduced to everyone that loves that design but couldn't have that knife based on where they lived. The removal of the knuckles but left the finger grooves so insure a sure non slip grip. They also removed the sharpened middle spine. These were only available in Combat Grade or for those that don't know, it only was available with a coated blade. These were only available for two weeks and was only available to be ordered with a coated blade. This uses the infamous INFI Blade steel which is a proprietary Steel is used only by Busse Combat knives. This was part of "Operation 2 Weeks!" Get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for two weeks and than discontinued. This is Brand New, never used, carried or sharpened.
    $680
     
    Last edited: Oct 5, 2017
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Argonne Attack CG .23" Saber Ground Tanker Grey Blade, Textured Black/Tan G10 Handle
    Argonne Attack Combat Grade - AACG9.8" Blade Length 15.85" Overall Length 1.8" Blade Width .23" Blade Thickness 20.7 Ounces
    Tanker Grey Coated Saber Ground Blade with V-Ground EdgeTextured Black/Tan G10 Handle
    INFI Blade Steel at 58-60Rc with Choil, Single Edged, No Knuckle Guard but with Finger Grooves
    This Model was available for sale starting January 20, 2016 through January 25, 2016 and has been discontinued so can no longer be order from the Busse Combat!

    Jerry Busse introduced the Argonne Attack CG in 2015 and this model has long been discontinued. This ones comes from the Argonne Assault Light Brigade but since that one had the Knuckle Guard and a second sharpened edge on the top spine, it was not legal in all the States within the US and could not be exported to outside the US. The Argonne Assault Light Brigade also has a sharpened middle spine so that was considered double edge and also not legal in most places. So this Argonne Attack was introduced to everyone that loves that design but couldn't have that knife based on where they lived. The removal of the knuckles but left the finger grooves so insure a sure non slip grip. They also removed the sharpened middle spine. These were only available in Combat Grade or for those that don't know, it only was available with a coated blade. These were only available for two weeks and was only available to be ordered with a coated blade. This uses the infamous INFI Blade steel which is a proprietary Steel is used only by Busse Combat knives. This was part of "Operation 2 Weeks!" Get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for two weeks and than discontinued. This is Brand New, never used, carried or sharpened.
    $715
     
    Last edited: Oct 5, 2017
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Flak Jack .175" Flat Ground Arctic White Cerakote Camouflage, Standard Textured Handle
    FJ CG- Flak Jack Combat Grade
    6.15" Blade Length 11.75" Overall Length 1.35" Blade Width .175" Blade Thickness 12 Ounces
    Flat Saber Ground Arctic White Cerakote Camouflage coated Blade with a Swedge and a V-Ground Edge
    Standard Textured Coated Handle (underneath the coating can be either Canvas Micarta or G10)
    INFI Blade Steel, Short Armored Swedge (SAS), Full Size Choil & Skull Crusher
    This is Brand New purchased directly from the Busse Combat. The FJ - Flak Jack was available for order on 9/27/18 and was SOLD OUT in one day!
    This has been discontinued by Busse Combat and no longer be ordered so get this before it's gone!

    The FJ - Flak Jack was introduced on 9/26/18 by Jerry Busse for pre-order and have since than been discontinued after being sold out after one day.
    Here is what Jerry Busse said about the introduction o this model:

    This lightweight blade is perfectly suited for use as a day-camper/hiker and is torqued and ready for heavy abuse on the battlefield. [​IMG]

    The Short Armored Swedge (SAS) reinforces the point while greatly increasing penetration. [​IMG] :cool: It does all of this without sacrificing
    the beloved real estate of those who love to baton the spine while prepping for campfires, shelter building, etc. . . [​IMG]:cool:

    The all new "Flak Jack" will leave those who are lucky enough to score one absolutely gobsmacked! :eek:o_O

    The Flak Jack is destined to make an important addition to any collector's or heavy abuser's war chest. :cool:

    There are 5 renditions of this wicked blade available, including a Very Limited INFI Edition from the Busse Custom Shop, a Satin Finished
    INFI edition, a BIG DC INFI edition, a coated INFI Combat Grade edition and an SR-101 Battle Grade edition!


    There were a total of 5 Editions of this model and this one is the Combat Grade or coated INFI blade version. This particular knife is different and special in that Busse may have done a few in a Cerakote Camouflage for those that are looking for something a bit different. This knife was coated in a Arctic White Cerakoted Blade with a Swedge and a Fine V-Ground Edge. As you have read Jerry Busse's description, this knife was made to be used for your one knife for camping. So this is about the average size with thinner blade for a lighter carry and designed and shaped for the best strength and utility. This has a new cerakote design which has different shades of camouflage in different random patterns throughout the entire knife. The Cerakote coats not only the blade but the Standard Textured Handles and protects it. The actual handle material is unknown can be either canvas micarta or G10, and because it is coated, is not known but will still have the lifetime guarantee. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this cerakote pattern on their knives and will never do it again, so get this now! This has a INFI Steel that is a incredible .175" thick. This maybe be the only one done like this as it may be a sample for the pattern. This is Brand
    New, never used, carried or sharpened.
    $500
     
    Last edited: Aug 24, 2019
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat 2nd Gen Ergo Battle Mistress .235" Saber Ground Hammered Silver Coated Blade, Textured Magnum Orange/Black G10 Handle
    2nd Gen EBM - Second Generation Ergo Battle Mistress
    9.5" Blade Length 15.4" Overall Length 1.7" Blade Width .24" Blade Thickness 23.2 Ounces
    Flat Saber Ground Hammered Silver Coated Blade with a V-Ground Edge
    Textured Magnum Orange/Black G10 Handle
    INFI Blade Steel, Full Size Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. This Model was available for "Operation Two Weeks" starting April 27, 2016 through May 2, 2016 and has been discontinued so can no longer be order from the Busse Company Website! The Second Generation Ergo Battle Mistress is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The Battle Mistress Ergo - BMe was introduced by Jerry Busse in 2001 and has since been discontinued. Many didn't think it looked well but those that have handled it know the ergo handle felt great in the hand and the INFI steel would handle anything you can put it through. After about 15 years, Jerry changed the design to make this better and keep everything else that worked before and this the Second Generation Ergo Battle Mistress was introduced and has since been discontinued. It was part of "Operation Two Weeks" and was available for pre-order at that time. The catch was this was only available in Combat Grade meaning INFI steel but with a coating. So there were no Satin Finish available yet. This has a Flat Saber Ground Hammered Silver Coated Blade with a very sharp V-Ground Edge which is Razor Sharp! The handle is a Textured Magnum Orange/Black G10 Handle. This is Brand New, never used, carried or sharpened.

    $1000
     
    Last edited: Nov 29, 2018
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame XL 3D Hardness Skull w/Red Eyes in Bronze Stainless EBO (Emergency Bottle Opener)

    This is the New Steel Flame Hardness Skull in Bronze on a Stainless EBO. This is the newest skull that just came out and although not labeled as for size, it is about the size of a XL. This is extremely rare because of the super low amount made. These were from the 2019 TKI Show in Las Vegas NV and this could only be purchased if you were lucky enough to be early in the line. This is finished in their Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. Finished in Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity.

    If you are looking at this, you probably know what you are looking at. This is a Bottle Opener/Dog Tab that is super high in demand. The reason for the demand is because of the quality and collectibility of everything Derrick/Leonard of Steel Flame . The EBO (Emergency Bottle Opener) itself is marked "Honor, Gratitude, Respect" and "Steel Flame" on the back. This is a high quality and of the best details and craftsmanship. This is a pretty thick and heavy piece (46 grams) for an EBO and this may be the only chance you have of owning one of these prized pieces. This is Brand New purchased directly from Steel Flame at the 2019 TKI Show in Las Vegas NV ! Everything will come as it came from directly from Steel Flame which is a small air tight zip lock baggie and the black drawstring pouch. Everything in the pictures is included. Here is your chance to own a beautiful piece of History!

    $950
     
    Last edited: Feb 1, 2019
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop ABA Anorexic Badger Attack .15" Saber Ground Satin Blade, Textured Black Canvas Micarta Rope Handle
    Anorexic Badger Attack - ABA
    4.6" Blade Length 9.75" Overall Length .15" Blade Thickness 7.1 Ounces
    Saber Ground Satin Blade Finish with V-Ground Edge with Small Choil
    INFI Blade Steel
    Textured Black Canvas Micarta Rope Handle
    The Anorexic Badger Attack was introduced in 2003 and have since than been discontinued. This one is a beauty because of the rare satin finish. This has a Saber Ground Satin Blade Finish with V-Ground Edge with Small Choil with a Busse Custom Shop Logo. This has the full Textured Black Canvas Micarta Rope Handle. This is pre-owned and there are very light micro scratches on the blade from the cardboard sheath. For it's age, it's in Excellent Shape. This still retains the orginal factory V-Ground Edge. This has never been used carried or sharpened. Here is your chance to own a piece of Busse History!
    $1200

     
    Last edited: Jun 15, 2018
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat 2004 Leaner Meaner .15" Saber Ground Satin Sterile Blade, Textured Snakeskin Handle
    2004 Leaner Meaner .15" Saber Ground Satin Sterile Blade, Textured Tigerhide Canvas Micarta Handle
    Leaner Meaner Street - LMS
    4.1" Blade Length 8.75" Overall Length 1" Blade Width .15" Blade Thickness 5.4 Ounces
    Flat Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Textured Snakeskin Micarta Handle
    INFI Blade Steel, Small Choil, Sterile Blade (No Logo), Small Talon Holes
    This is Brand New from a Private Collection! The Leaner Street has been discontinued by Busse Combat and now no longer available to be ordered so get this before it's gone!
    The Leaner Street & Meaner Street Limited Edition were introduced by Jerry Busse in 2004 and have long been discontinued. At that time when the Meaner Street came out, there were two version of them made. The thicker version was a flat ground blade that was about .22" thick and than there were the thinner Flat Saber Ground that was about .15" thinner version called the Leaner which was more of a slicer. These two blades along the perfect size blade and handle about fit all the everyday carry that anyone would need! This is an ULTRA rare one, as most collectors know there were not many produced and is highly sought after! What makes this one super rare is that it is Sterile and has the textured snakeskin handle. The original owner of this knife was idahoskunk who was the only authorized Busse dealer. This one was in his personal knife collection and I guess if anyone had a dead mint Sterile Snakeskin Leaner Meaner, it would be him. Idahoskunk was very well connected to Jerry Busse and had requested this knife be made this one. This one is from his own personal collection and was hand picked himself. If you look at the Textured Snakeskin Micarta Handle, you will multiple colors in what is supposed to be a combination of Micarta and Linen. There weren't much of this material made and to date, they have never been able to reproduce it and has been known to be just from this period from Busse and most HOGs (Busse collectors) know this. This is the most sought after handle on any Busse Knife to date! This is Brand New and Dead Mint which is pretty rare. This is a Grail Knife for any Busse Collector. This has a Flat Ground Hand Finished Satin Blade with a V-Ground Edge. This is Brand New, never used, carried or sharpened.

    $2200
     
    Last edited: Dec 29, 2017
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Jack Hammer Variant .18" Flat Saber Ground Satin Blade, Hand Smooth Green/Black G10 G-rexed Stacked Bones Handle w/Mosaic Pins
    JH - Jack Hammer
    6.4" Blade Length 11.95" Overall Length 1.5" Blade Width .18" Blade Thickness 14.7 Ounces
    Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Smooth Olive Green/Black G10 G-rexed Stacked Bones in Resin Handle w/Mosaic Pins
    INFI Blade Steel, Full Size Choil & Skull Crusher
    This is Brand New directly from Busse Combat. The JH - Jack Hammer has been discontinued by Busse Combat and now now long available and can no longer be ordered so get this before it's gone!
    The JH - Jack Hammer was introduced in 2006 by Busse Combat and have since than been discontinued. The original JH - Jack Hammer Where coated blades with CBT (Patented Corrugated Bevel Technology). This model came back in 2008 with the Hell Razor in a 2008 Special Edition in a Competition Finish and than in 2009, Jerry Brought the Sledge Hammer which was a FAT .32" Blade. Those are the only three times that this model came out. Well, it seems this is a variant now appearing in about the same blade thickness with the Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge with NO CBT's. That V-Ground edge that is Razor Sharp. The Busse Custom Shop decided to go over the top with the handles and did a Custom Hand Smooth Olive Green/Black G10 G-rexed Stacked Bones in Resin Handle finished off with Mosaic Pins. This is a very special knife because although Busse Has used Stacked Bones for handles before, they are usually end cuts, and this is a lengthwise cut which I have never seen before! This has a INFI Steel that is a incredible .18" thick with a Hand Finished Satin Blade which is extremely rare. This was a very special "One of a Kind" knife that was ever made! It's a lighter and faster slicer. This is Brand New, never used, carried or sharpened.

    $1200 Sold Pending Funding
     
    Last edited: Jan 23, 2018
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Badger Attack Ergo 2nd Gen .23" Saber Ground Hammered Silver Coated Blade, Magnum Textured Black Canvas Micarta Handle
    Badger Attack Ergo 2nd Generation - BAEII
    4.85" Blade Length 10.2" Overall Length 1.55" Blade Width .23" Blade Thickness 12.6 Ounces
    Saber Ground Hammered Silver Coated Blade with V-Ground Edge
    Magnum Textured Black Canvas Micarta Handle
    INFI Blade Steel, Small Choil
    This knife was introduced were available for sale on 12/23/15 and were sold out before 12/2715. The Badger Attack Ergo 2nd Generation has been discontinued by Busse Combat and now now long available and can no longer be ordered so get this before it's gone!

    In 2015 Jerry Busse introduced the 2nd Gen Badger Attack Ergo saying this:
    The Second Generation Badger Attack E is a complete redesign. Whereas the original BAE had the same handles, choil and blade width as the Steel Heart E, this entire platform has been downsized, making it a perfect dayhiker and EDC for places where 5" is the maximum blade length. The blade is robust enough to handle anything you can throw at it while maintaining excellent blade geometry for cutting and slicing.


    The Badger Attack Ergo 2nd Generation - BAEII was introduced by Jerry Busse on 12/23/15! The Badger Attack Ergo has been such a very popular model that Busse Combat did a second generation and has made improvements. The Second Generation Badger Attack E is a complete redesign. Whereas the original BAE had the same handles, choil and blade width as the Steel Heart E, this entire platform has been downsized, (see last picture) making it a perfect dayhiker and EDC for places where 5" is the maximum blade length. The blade is robust enough to handle anything you can throw at it while maintaining excellent blade geometry for cutting and slicing. This Hammered Silver Coating is very rare and was not an option when ordering so here may be your only chance to get one with this color blade. I don't believe there were many of these coated models made. The V-Ground Edge is Razor Sharp! This uses the infamous INFI Blade steel which is a proprietary Steel is used only by Busse Combat knives. This was part of "Operation 2 Weeks!" Get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for two weeks and than discontinued. This is Brand New, never used, carried or sharpened.
    $410
     
    Last edited: Mar 2, 2019
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Killa Zilla II .29" Convexed Satin Blade V-Ground Edge, Full Spalted Maple Handle, Orange/Black Liners & Mosaic Pins
    Killa Zilla II - KZII
    11.85" Blade 18.6" Overall .29" Thick Convexed Blade 30.6
    Full Height Convexed Hand Finished Satin Blade w/V-Ground Edge
    Custom Hand Smoothed Full Spalted Maple Handle, Orange/Black Liners & Mosaic Pins
    INFI Blade Steel, Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This is Brand New purchased directly from Busse Combat at the 2015 Fall Knob Creek in KY. The Killa Zilla is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    These Killa Zilla II were introduced by Jerry Busse in 2010 and have long been discontinued. These were made after they made the Killa Zilla Test Team. They got the feedback positive and negative and made the changes to make these models! This one has the full height Convexed Satin Blade with V-Ground Edge! This has a custom hand smooth thick Full Spalted Maple Handle, Orange/Black Liners and finished off with w/Mosaic Pins. Not only is this a beautiful piece but it's fully functional and will handle anything you can throw at it. The V-Grind Edge is Razor Sharp! This is very rare as it is not only the ONLY Killa Zilla II at the 2015 Fall Knob Creek, but all normal Killa Zilla have a Full Height Convex Blade/Edge and this one has the V-Ground Edge. This may be the only one in the world with a Satin Blade with that grind! This is Brand New, never used, carried or sharpened.
    $1400
     
    Last edited: Oct 8, 2017
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Scrap Yard Knife Company SYKCO Trash 2 .20" Saber Ground Moss Green Blade, Black Resiprene C Handle
    TRASH 2 - The Resiprene Anniversary Steel Heart 2
    9.6" Blade Length 14.75" Overall Length 1.95" Blade Width .20" Blade Thickness 15.2 Ounces
    Moss Green Coated Saber Ground Blade with V-Ground Edge
    Black Resiprene C Handle
    This uses the SR-101 Blade Steel with a 58-60Rc.
    This Model was available for sale starting February 17, 2016 through February 20, 2016 and has been discontinued so can no longer be order from the Busse Company Website! This is Brand New purchased directly from Busse Combat.
    The TRASH 2 - The Resiprene Anniversary Steel Heart 2 was went Live on February 17, 2016 and didn't last long and sold out! This knife is meant to replace the Trash 1. In comparison has about an additional 3" extra blade and the blade thickness a bit thinner from a .25" to about a .20" thickness. Both use a coated SR101 Blade Steel with a Resiprene C Handle. The Trash 2 is a bit thinner but There was a very limited supply. This has the Moss Green Coated Saber Ground Blade with V-Ground Edge with the Black Resiprene C Handle. As part of "Operation 2 Weeks" it wasn't around for long and is now discontinued!

    $270
     
    Last edited: Mar 21, 2017
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Scrap Yard Knife Company SYKCO Trash 2 .195" Saber Ground Sage Crinkle Blade, Black Resiprene C Handle
    TRASH 2 - The Resiprene Anniversary Steel Heart 2
    9.6" Blade Length 14.75" Overall Length 1.95" Blade Width .20" Blade Thickness 15 Ounces
    Sage Crinkle Coated Saber Ground Blade with V-Ground Edge
    Black Resiprene C Handle
    This uses the SR-101 Blade Steel with a 58-60Rc.
    This Model was available for sale starting February 17, 2016 through February 20, 2016 and has been discontinued so can no longer be order from the Busse Company Website! This is Brand New purchased directly from Busse Combat.
    The TRASH 2 - The Resiprene Anniversary Steel Heart 2 was went Live on February 17, 2016 and didn't last long and sold out! This knife is meant to replace the Trash 1. In comparison has about an additional 3" extra blade and the blade thickness a bit thinner from a .25" to about a .20" thickness. Both use a coated SR101 Blade Steel with a Resiprene C Handle. The Trash 2 is a bit thinner but There was a very limited supply. This has the Sage Crinkle Coated Saber Ground Blade with V-Ground Edge with the Black Resiprene C Handle. As part of "Operation 2 Weeks" it wasn't around for long and is now discontinued!
    This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for two weeks and than discontinued. This is Brand New, never used, carried or sharpened.
    $270
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,684
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Scrap Yard Knife Company SYKCO Trash 2 .195" Saber Ground Tanker Grey Blade, Black Resiprene C Handle
    TRASH 2 - The Resiprene Anniversary Steel Heart 2
    9.6" Blade Length 14.75" Overall Length 1.95" Blade Width .20" Blade Thickness 15.2 Ounces
    Tanker Grey Coated Saber Ground Blade with V-Ground Edge
    Black Resiprene C Handle
    This uses the SR-101 Blade Steel with a 58-60Rc.
    This Model was available for sale starting February 17, 2016 through February 20, 2016 and has been discontinued so can no longer be order from the Busse Company Website! This is Brand New purchased directly from Busse Combat.
    The TRASH 2 - The Resiprene Anniversary Steel Heart 2 was went Live on February 17, 2016 and didn't last long and sold out! This knife is meant to replace the Trash 1. In comparison has about an additional 3" extra blade and the blade thickness a bit thinner from a .25" to about a .20" thickness. Both use a coated SR101 Blade Steel with a Resiprene C Handle. The Trash 2 is a bit thinner but There was a very limited supply. This has the Tanker Grey Coated Saber Ground Blade with V-Ground Edge with the Black Resiprene C Handle. As part of "Operation 2 Weeks" it wasn't around for long and is now discontinued!
    This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for two weeks and than discontinued. This is Brand New, never used, carried or sharpened.
    $270
     

Share This Page