1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Thread of New Knives Updated Daily

Liu Kang Feb 13, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,670
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Fatback Defenders Variant .32" Saber Double Hollow Ground Satin Blade w/swedge, Hand Smoothed Red/Black G10 G-rexed Mammoth Tooth Bolstered Spalted Maple Handle w/Solid Brass Bolts
    Fatback Defenders - FD
    4.35" Blade Length 9.05" Overall Length 1.05" Blade Width .32" Blade Thickness 10.8 Ounces
    Custom Hand Ground Saber Double Hollow Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Hand Smoothed Red/Black G10 G-rexed Mammoth Tooth Bolstered Spalted Maple Handle w/Solid Brass Bolts
    INFI Blade Steel at 58-60Rc with Small Choil, Swedge
    This is Brand New straight from the Busse Custom Shop! This Fatback Defender model with standard handles was available for sale starting April 27th 2016 through May 5th, 2016 and has been discontinued so can no longer be order from the Busse Combat.

    The original Public Defender was introduced by Jerry Busse in 2002. The Public Defender was a really cool knife with only a 4.5" blade at about .187" thick. This is about as close to a Tanto Blade as you were going to get from Busse Combat. Well, fast forward 14 years later, Busse takes the design and adds an Ergo Handle to the design and makes it in three versions. The versions are: Ergo Public Defender Limited Edition, the Ergo Public Defender Battle Grade and the thick version called Fatback Defender! Garth Reckner first introduced the Fatback Defender in Spring of 2016 and it has long since been discontinued. You will notice all Fatback Defenders were offered through the Busse Custom Shop and that is because these were all done by hand. The ones that were available for order have a custom Deep Dish Hollow Ground Blade all done by hand. Well, this one is different and is a full blown custom and the Busse Custom Show wanted to change things up by also changing the blade and making this True One of a Kind Full Blown Custom. They changed the shaped of the blade to an up-sweep into the top spine and than added a long swedge that pretty much is the length of the entire spine. The primary cutting edge on the Fatback Defender is a Double Deep Dish Hollow ground Grind, but on this one has one single long Hollow Ground bevel finished off with a fine V-Ground Edge. I believe this was done to allow for better penetration to make up for the thickness of this blade. They also went all out on the Handle with a Custom Hand Smoothed Red/Black G10 G-rexed Mammoth Tooth Bolstered Spalted Maple Handle finished off with Solid Brass Bolts . This was a "One of a Kind" and you will never see another one like it. You can tell a lot of thought, planning and work went into making this beautiful knife. This is Brand New, never used, carried or sharpened.

    $1900
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,670
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Forsaken Team Gemini .22" Nuclear Option Competition Finish Blade w/fuller, Hand Smoothed Tan Canvas Micarta G-rexed Mammoth Tooth Handle w/Solid Brass Bolts and Tan Liners
    TG - Team Gemini
    8" Blade Length 13.5" Overall Length 1.55" Blade Width .22" Blade Thickness 19.9 Ounces
    Saber Ground Nuclear Option Competition Finish Blade w/fuller and Corrugated Bevel Tech (CBT) with a V-Ground Edge
    Custom Hand Smoothed Tan Canvas Micarta G-rexed Mammoth Tooth Handle w/Solid Brass Bolts and Tan Liners
    INFI Blade Steel, Full Size Choil, Fuller (Blood Groove), Corrugated Bevel Tech (CBT), Swedge
    This is Brand New purchased directly from Busse Combat. The Forsaken Team Gemini can no longer be order from the Busse Company because it's Sold Out,
    and has been Discontinued!

    These Forsaken Team Gemini were introduced by Jerry Busse in March of 2018 and have long been discontinued. The Team Gemini was made famous
    by the TV Series The Walking Dead where it was carried by the character Daryl Dixon and used to dispatch herds of zombies. It was made legendary by its
    use in military campaigns around the world. Well to improve on it would be hard but Jerry did it. He added the Corrugated Bevel Tech (CBT) to the Blade
    along with a Swedge and Fuller. Options for the Blade finish was either the Competition Finish or a coated blade. This is NOT a satin finish so you can may see
    machining lines and imperfections on the blade/fuller but it's supposed to be like that. Well, the Busse Custom Shop got a hold of one of these blanks that
    was left over went all out and created this custom piece. This knife has the Nuclear Options which includes: Handworked Flats, Custom Handles, and Extra
    attention to the outer perimeter finish. For the handles, the Crab Shack went all out on this knife and went with a Custom Hand Smoothed Tan Canvas
    Micarta G-rexed Mammoth Tooth Handle finished off with Solid Brass Bolts and Tan Liners. This is a true Custom and very RARE knife made by the Busse
    Custom shop! This is a One of a Kind and something like this is not available to be ordered. This is Brand New: Dead Mint never used, carried or sharpened.

    $2000
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,670
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Silent Knight .22" Aged Bronze Cerakoted Blade with CBT's, Magnum Textured Handle
    Micarta G-rexed Stacked Black Bones in Orange Resin Handle w/Solid Brass Pins
    Silent Knights - SK
    10" Blade Length 15.7" Overall Length 1.65" Blade Width .22" Blade Thickness 19.1 Ounces
    Saber Ground Aged Bronze Cerakoted Finished Blade w/CBTs with a V-Ground Edge
    Textured Handle which can be either Canvas Micarta or G10 but is unknown because it's also protected and coated with the Cerakote Coating
    INFI Blade Steel, CBT (Corrugated Bevel Technology)
    INFI Blade Steel, Swedge, CBT (Corrugated Bevel Technology), Large Choil & Blade Catcher (Hook)
    This is Brand New purchased directly from Busse Combat Custom Shop. This model The Silent Knight w/CBT Model was part of "Operation Two Weeks" and
    available for sale starting November 8, 2017 through November 11, 2017 and has been discontinued so can no longer be order from the Busse Company
    Website!

    Jerry Busse made and introduced first Silent Knight was before 1997. I believe the first one was made in A2 Steel but after they were made in INFI but all were all made through the Busse Custom Shop because with each and every one being made by hand and all of them being full customs. The Silent Knight was never available for sale through the Busse Combat website as there was never a "production model." Only a handful were made for shows and Ganzas so very rare to see one for sale! There were only a few handful known to exist and a true Grail for most Busse collectors. If you were lucky you were at a show where one was available but then, getting it, that's a different story. Well, in 2017, Jerry decided to a very short run for "Operation Two Weeks" and because he wanted everyone to have an opportunity, he made it with three major versions. Here is what he said about them:

    For more than 20 years, the only way to score one of these legendary blades has been through the Busse Custom Shop! Now, featuring our patented Busse Corrugated Bevel, the Silent Knight is coming to you in a small production run. There are 3 base renditions of the Silent Knight available, including a Competition Finished INFI edition, a coated INFI Combat Grade edition, and a coated
    SR-101 Battle Grade edition...


    So these were available for order for two days and were "Sold Out!" The Silent Knight have been the one of the Ultimate Grail knives for all Busse collectors since so few were ever made and so very hard to come by. These Silent Knight are made to be the Ultimate Fighting knife and I feel they may be. These
    are thin and not too thick so it is not heavy. The handle is shorter for one hand only and has a nice long re-curve blade and has the blade catcher (hook) on the top! This particular one was made by the Busse Custom Shop and NOT one of the standard production ones you order. I think this one was made
    either as a prototype or was Cerakoted by mistake as there was never any runs of this model with a Cerkote coating. I have not seen another one of these so only the shop really knows if more than one of these were ever made. This starts off with the blanks from the 2017 Silent Knight with the patented
    Corrugated Bevel Technology (CBT), and than the entire knife was Cerakoted with the Aged Bronze coating. The Cerakote cover not only the blade but the Textured Handle and protects it. The handle material is either canvas micarta or G10 but is unknown because it is coated but either way, it also is covered with the lifetime warranty. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is Brand New, never used, carried or sharpened as I bought this directly from Busse Combat.

    $1000
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,670
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Hell Razor .195" Hammered/Competition Finish w/CBT's, Hand Smoothed Tan Canvas Micarta G-rexed Mixed Mammoth Tooth Matrix Handle with Solid Brass Bolts and Tan Liners
    Hell Razor - HR
    6.75" Blade Length 12.2" Overall Length 1.7" Blade Width .20" Blade Thickness 16.5 Ounces
    Saber Ground Hammered/Competition Finish Blade w/CBT's with a Blended Convexed Edge
    Custom Hand Smoothed Tan Canvas Micarta G-rexed Mixed Mammoth Tooth Matrix Handle with Solid Brass Bolts and Tan Liners
    INFI Blade Steel, Full Size Choil, CBT's (Corrugated Bevel Technology), Swedge, Fuller (Blood Groove)
    This is Brand New purchased directly from Busse Combat. The Hell Razor Model has been discontinued so can no longer be order from the Busse Company Website!

    Back in 2005 when the Hell Razor was introduced by Jerry Busse, all of the Hell Razor models came with the CBT (Corrugated Bevel Technology) except for the few Mud Razors that were produced. All of the Hell Razors Models have long since been discontinued even thought many people loved this model. This is one of those original blades with the CBT's (Corrugated Bevel Technology), Swedge, Fuller (Blood Groove). Someone from the Busse Custom shop must have found an old blank laying around somewhere and decided to take it to the next level. They started out by doing a hammered finish on the Flats, did like a bead blast on the competition CBT bevels and also on the Fuller (Blood Groove). There is a satin finish on the Swedge, spine and the Blended Convexed Edge. They than decided to go all out on the handles and did a Custom Hand Smoothed Tan Canvas Micarta G-rexed Mixed Mammoth Tooth Matrix Handle finished off with a Solid Brass Bolts and Tan Liners. This is a one of a kind and you'll never see another Hell Razor like this ever again. This was purchased directly from Busse Combat by myself and is Brand New: never used, carried or sharpened.
    $1800
     
    Last edited: Oct 17, 2019
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,670
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Hell Razor 2 .215" Nuclear Option Competition Finish Blade w/fuller, Hand Smoothed Black/Tan G10 G-rexed Mammoth Tooth Handle w/German Nickle Silver Tubes and Tan Liners
    HR2 - Hell Razor 2
    7.9" Blade Length 13.75" Overall Length 1.75" Blade Width .215" Blade Thickness 19.8 Ounces
    Saber Ground Nuclear Option Competition Finish Blade w/fuller and Corrugated Bevel Tech (CBT) with a V-Ground Edge
    Custom Hand Smoothed Black/Tan G10 G-rexed Mammoth Tooth Handle w/German Nickle Silver Tubes (filled w/Copper Resin) and Tan Liners
    INFI Blade Steel, Full Size Choil, Fuller (Blood Groove), Corrugated Bevel Tech (CBT), Swedge
    This is Brand New purchased directly from Busse Combat. The Hell Razor 2 can no longer be order from the Busse Company because it's Sold Out, and has been Discontinued!

    On April 5, 2019 Jerry Busse introduced the Hell Razor 2 and here is what he said:

    Here it is gang!!! One of the meanest models to ever escape the Busse Combat Shop!!! . . .
    It’s been nearly 14 years since the Hell Razor made its debut. It was the first Busse Combat model to feature our patented Corrugated Bevel Technology (CBT).
    The corrugated bevel not only lightens and strengthens the blade but reduces cutting friction as well.
    The HR2 sports an 8” INFI blade and features our sculpted tip which greatly aids in ease of penetration. Our updated SF handle offers excellent control in all applications.
    The HR2 is being offered in 2 blade finishes including Coated and Competition Finish. The competition finish will have light machining marks.


    Unfortunately, it didn't last long and the Hell Razor 2 have long been discontinued. In the beginning, the original Hell Razor was created in 2005 by Jerry Busse and since than it has become legendary because many people have used this model and after it has been put through the paces and has come out on top! Many in military personal from around the world love this model because it was made to be used. Back in 2005 all of the Hell Razors only came with a coated blade with standard textured handles. This is a medium sized knife with a thinner blade for this size and without being too heavy. This model was always on the top of the made it one of those "If you could carry only one knife, what would it be" list. So fast forward 14 years, Jerry finally decided to improved and update the Hell Razor version with the blade and overall length being a little bit longer and the blade a tad bit thicker. This still has the Corrugated Bevel Tech (CBT) but those too are updated and different.
    Well someone the Busse Custom Shop got a hold of one of these blanks and they just went to town on this knife! This knife has the Nuclear Options which includes: Handworked Flats, Custom Handles, and Extra attention to the outer perimeter finish. For the handles, the Crab Shack went all out on this knife and went with a Custom Hand Smoothed Black/Tan G10 G-rexed Mammoth Tooth Handle finished off with German Nickle Silver Tubes (filled w/Copper Resin) and Tan Liners. This is a true One of a Kind Custom and very RARE knife made by the Busse Custom shop and not available to be ordered. This is Brand New: never used, carried or sharpened.
    $1800
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,670
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Urban Fudge .323" Saber Hollow Ground Doublecut Blade, Black/Tan G10 G-rexed Ivory Micarta Handle w/Mosaic Pins
    Urban Fudge - UF
    5.85" Blade Length 10.75" Overall Length 1.2" Blade Width .323" Blade Thickness 15.1 Ounces
    Hand Ground Saber Deep Hollow Ground Hand Doublecut (Beadblasted) Blade with a V-Ground Edge
    Custom Hand Smoothed Black/Tan G10 G-rexed Ivory Micarta Handle w/Mosaic Pins
    INFI Blade Steel at 58-60Rc with Choil with NO Swedge
    This is Brand New straight from the Busse Custom Shop! This Urban Fudge model was available for sale starting March 9th 2016 through March 14, 2016 and has been discontinued so can no longer be order from the Busse Combat.
    Jerry Busse first introduced the Urban Grudge in March of 2010 in a online Ganza and has been discontinued. When the Urban Grudge was offered, it was only available with a Doublecut (bead-blasted) Blade finish with Black Canvas Micarta. This knife comes from the original HG55 design but they took off CBT (Corrugated Bevel Technology) and shortened and reshaped the handle to make it shorter and fit the handle better. And since the HG55 was a fighter knife, so is this one! This one is the New version in a Bombproof FAT version. These are all done through the Busse Custom Shop with Deep Hollow Ground blade on a .325" Blank. This is a Full Blown Custom finished off WITHOUT a Swedge, V-Ground Edge and a this one has the one Doublecut finished ever done. The normal Urban Fudge has a swedge but this one does NOT! The Busse Custom Shop went all out on the handle and did a Custom Hand Smoothed Black/Tan G10 G-rexed Ivory Micarta Handle finished off with Mosaic Pins. You can tell a lot of thought, planning and work went into making this beautiful knife. This was purchased directly from Busse Combat Custom Shop by myself. There was only one of these made in the Doublecut finish made and this model has already been discontinued. This is Brand New, never used, carried or sharpened.
    $1100
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,670
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    2017 Custom Ernest Emerson Black Roadhouse Satin Blade w/Wave, Black Cerakoted Titanium Bolsters w/Black Checkered Micarta Handle
    Blade Length: 3.7"
    Overall Length: 8.75"
    Blade Thickness: .125"
    Hardness 57-59 RC
    Blade Steel: CPM 154-CM
    Handle: Custom Black Cerakoted Titanium Bolsters, Black Checkered Micarta
    Weight: 6.3 Ounces

    The Emerson Roadhouse has been like a flagship model for Emerson Knives for a very long time. This model has been put through the paces, used and abused in the worse places and has proven to perform in a variety of situations. This is one of Emerson's larger models and has not taken long to becine well received and one of everyone's favorite blades. There has only been a few customs of this knife made for lotteries but the very first and only time Ernest has done a Black Cerakoted Titanium Bolsters with Black Checkered Micarta scales. This is of course with Black Cerakoted Titanium Liners, screws and black backspacer. What really sets this knife apart from the other Black knives he has done is that this one has a hand finished satin blade. And your standard production Roadhouse has a V-ground blade where this knife has the famous well know Ernest Emerson hand ground chisel Ground Tanto Blade. This particular knife has the SPECWAR logo lasered on the blade.

    This is Brand New from the Online 2017 Christmas Auction in December 8, 2018 on Emerson Knives web page. This knife is one of a kind and could not be won in the lottery but the highest bidder was able to purchase this knife. This is new with Box, and Baggie. I had a special request before the knife was shipped to me that Mr. Ernest Emerson hand sign the box and he also put the year on there so it's easier to keep track of when this was made. This has a Smooth opening action, with a centered blade, solid early lockup, and original edge. This is Brand New, never used, carried or sharpened and has been sealed air tight and in a safe it's entire life. This was in my personal knife collection and a true grail. This is a "One of a Kind" and you will never see another one like this so here is your own chance to own a piece of Emerson History.

    $3000
     
    Last edited: Nov 5, 2019
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,670
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    NJ25 Busse Combat Custom Shop SAR8 .22" Satin Blade, Black G10 G-rexed Cherry Wood Handle w/Mosaic Pins
    Search & Rescue 8 - SAR8
    8.65" Blade Length 14.35" Overall Length 1.45" Blade Width .22" Blade Thickness 19.2 Ounces
    Full Height Convexed Satin Blade/Edge
    Custom Hand Smoothed Black G10 G-rexed Cherry Wood Handle w/Mosaic Pins
    INFI Blade Steel, with Full Size Choil & Nuclear Meltdown Treatment on the Spine and Edges (rounded edges)
    This is Brand New purchased directly from a Busse Combat in the online 2011 Cupid Ganza. The Search & Rescue 8 has long since been discontinued for a good while and very hard to find even on the secondary market! Finding a "One of a Kind" Full Blown Beautiful Custom like this is near impossible!
    The Busse Combat Search & Rescue 8 - SAR8 was first introduced by Jerry Busse in 2009 and has long been discontinued. The SAR8 were offered in only specific color color combination and were ONLY offered through the Busse Company Store. The Busse Custom Shop did make this one for 2011 online Cupid Ganza and it was listed as Cupid 42 and has been in my personal collection every since! This SAR8 had a Full Height Full Convexed Blade/Edge which is razor sharp. They also went all out to make this Custom Hand Smoothed Black G10 G-rexed Cherry Wood Handle finished off with Mosaic Pins. These handles are quite functional and beautiful. I believe this was the only one like this which makes it not only unique but also "One of a Kind!" You will never find another one exactly like it! This is from my personal collection. You can see a lot of thought, planning and work went into making this a beautiful knife! This is Brand New, never used, carried or sharpened.
    $1200
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,670
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Flak Jack .17" Flat Saber Ground Satin Blade, Magnum Black G10 G-rexed Brain Coral Handle w/Solid Brass Bolts
    FJ - Flak Jack
    6.15" Blade Length 11.75" Overall Length 1.35" Blade Width .17" Blade Thickness 11.9 Ounces
    Flat Saber Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Hand Smoothed Magnum Black G10 G-rexed Brain Coral Handle w/Solid Brass Bolts
    INFI Blade Steel, Short Armored Swedge (SAS), Full Size Choil & Skull Crusher
    This is Brand New directly from the Busse Combat Custom Shop. The FJ - Flak Jack was available for order on 9/27/18 and was SOLD OUT in one day! This has been discontinued by Busse Combat and no longer be ordered so get this before it's gone!

    The FJ - Flak Jack was introduced on 9/26/18 by Jerry Busse for pre-order and have since than been discontinued after being sold out after one day. Here is what Jerry Busse said about the introduction o this model:

    This lightweight blade is perfectly suited for use as a day-camper/hiker and is torqued and ready for heavy abuse on the battlefield. :thumbsup:
    The Short Armored Swedge (SAS) reinforces the point while greatly increasing penetration. :thumbsup: :cool: It does all of this without sacrificing the beloved real estate of those who love to baton the spine while prepping for campfires, shelter building, etc. . . :thumbsup::cool:
    The all new "Flak Jack" will leave those who are lucky enough to score one absolutely gobsmacked! :eek:o_O
    The Flak Jack is destined to make an important addition to any collector's or heavy abuser's war chest. :cool:
    There are 5 renditions of this wicked blade available, including a Very Limited INFI Edition from the Busse Custom Shop, a Satin Finished INFI edition, a BIG DC INFI edition, a coated INFI Combat Grade edition and an SR-101 Battle Grade edition!

    There were a total of 5 Editions of this model the one I have listed here in this listing is None of the Above! This one is a full blown custom made by the Busse Custom Shop. This knife has a Flat Saber Ground Hand Finished Satin Blade with a Fine V-Ground Edge that is razor sharp. They went all out on the handle and went with a Custom Hand Smoothed Magnum Black G10 G-rexed Brain Coral Handle finished off with Solid Brass Bolts. As you have read Jerry Busse's description, this knife was made to be used for your one knife for camping. So this is about the average size knife with thinner blade that is finished off to be kept as a safe queen. This has a INFI Steel that is a incredible .17" thick so it is thin in terms of a Busse and can really slice though things. This model was done with just one short run so very limited quantity. On the one side of the handle, there seems to be a black line in the brain coral and that's not a sharpie marking but built into the handle. This is exactly the way it came from Busse Combat and being sold like that. This is Brand New, never used, carried or sharpened.

    $1100
     
    Last edited: Nov 9, 2019
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,670
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Ernest Emerson Sig Legion Prototype Black Flipper w/Wave, Black G10 Handles
    Blade Length: 3.6″
    Overall Length: 8.8"
    Blade Thickness: .125"
    Hardness 57-59 RC
    Blade Steel: 154-CM
    Handle: Titanium/Stainless Steel Liners with Textured Black G10 Handle Scale
    Weight: 6.2 Ounces
    On February 20, 2018 Emerson released four of these Sig Legion Prototype Flipper to only members and sold as a part of the “Emerson Area 51” This was one hand ground and assembled by Ernest Emerson himself. This model was made as a collaboration between Emerson and Sig. The Legion Trailing Tanto by Ernest Emerson features a DLC coated blade, as well as a textured grip tape handle featuring the SIG Legion Chevron. This flipper knife also features a self-deploying Emerson 'Wave Opening' for fast tactical deployment. Ernest Emerson first introduced the Sig Legion Flipper Folder at the 2015 Shot Show in Las Vegas NV. With the exception of the few customs like this that he makes just for the lotteries, I believe the production of the Legion Trailing Tanto production is exclusive and only sold by Sig Sauer to only Legion Members Only. This custom Emerson flipper has the new GTC bearing system. This has a Beadblasted Titanium Bolsters with Titanium liners. This knife is the one that is most sought after by all the Emerson Collectors because in addition to the wave feature for fast out of the pocket deployment, the flipper makes it fast to open when the knife is in your hands or you can just the thumb disk to open this manually. Ih ave personally talked to Ernest Emerson about these prototype and these are not a gimmick but actual real prototypes. He makes all these by hand and hand grinds and assembles each one. This one of his larger customs where the blade is about 3.6" and the overall is about 8.8" so if you have a larger hand or like larger knives, this may fit you nicely. This has a V-ground blade with a Asymmetrical Edge that is what Ernest Emerson is known for! This knife is the one that is most sought after by all the Emerson Collectors from around the world and in the military. This knife was hand ground and hand made by Ernie Emerson himself. This has a Black DLC coated Blade made from 154CM steel. This one has the wave feature which has made Emerson Knives they company they are today allowing for fast opening as you withdraw this from your pocket. This has a Black G10 handles over Black Coated Titanium Liners ! There were only 4 of these made and thus sought after by all the Emerson Collectors from around the world and in the military. This has a very strong detent and when release it flies out almost like it was thrust bearings but this one uses the GTC Stainless Bearings. Solid early vault like lockup with no blade play in any direction with a centered blade. This has the "Prototype" marked on the blade right under the Wave feature. I really love the new action and features on Emerson's new flippers. This has an ultra smooth flipping action that rides on ball bearings with a strong detent to prevent it from accidentally opening in your pocket. Solid early lockup with a centered blade. This one is Brand New purchased directly from Emerson Knives and from my personal collection. This is Brand New: never used, carried or sharpened. This will come with the factory box that I had Ernest Emerson hand autograph, plastic baggie, Emerson Knives sticker and pamphlet. This is a beautiful knife and you may see another one like this so here is your own chance to own a piece of Emerson History.

    $1200
     

Share This Page