1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Thread of New Knives Updated Daily

Liu Kang Feb 13, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Choiless Boss Jack .215" Full Height Convexed Satin Blade, Hand shaped/Smoothed Orange/Black G10 G-rexed Red Maple Bolstered Birdseye Maple Handle w/Mosaic Pins
    Boss Jack - BJ
    6.1" Blade Length Cutting Edge 5.9" 11.15" Overall Length 1.2" Blade Width .215" Blade Thickness 11.6 Ounces
    Full Height Convexed Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand shaped/Smoothed Orange/Black G10 G-rexed Red Maple Bolstered Birdseye Maple Handle w/Mosaic Pins
    INFI Blade Steel, No Choil and Nuclear Meltdown Treatment on the Spine and Edges
    This is Brand New Purchased directly from Busse Combat. These Boss Jack have been discontinued and have been Sold out so get this now while you can!

    In 2010 Jerry Busse introduced the Boss Jack and they were a great hit because of the size and these were similar to the Straight Handle Satin Jack but with a newer twist. The Boss Jack models were available for order for a bit and than discontinued. At that time, the .22" thick Boss Jacks were only Prototype so this was using one of those blanks and has the full INFI Steel that is .215" thick! This has the full height Convexed Choiless Hand Finished Satin Blade with an Ultra Rare a V-Ground Edge! I don't think many Choiless Boss Jacks in .215" exist in the world. Keep in mind without the Choil, the cutting edge is longer and this knife will weight just a tab bit more. These were never made as a production with the Custom Hand shaped/Smoothed Orange/Black G10 G-rexed Red Maple Bolstered Birdseye Maple Handle finished off with Mosaic Pins. With the hand shaped handles, it contours to your hand much better and feels much more comfortable fitting into the swells of your hand. You can tell a lot of time, thought, planning and work went into the making of this knife! This is Brand New, never used, carried or sharpened.

    $1050
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Choiless Boss Jack .178" Saber Ground Satin Blade, Hand Smoothed Red/Black G10 G-rexed Alligator Tooth Matrix Bolstered Curly Oak Handle w/Mosaic Pins & White Liners
    Boss Jack - BJ
    6.2" Blade Length Cutting Edge 5.75" 11.25" Overall Length 1.2" Blade Width .178" Blade Thickness 11.1 Ounces
    Flat Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smoothed Red/Black G10 G-rexed Alligator Tooth Matrix Bolstered Curly Oak Handle w/Mosaic Pins & White Liners
    INFI Blade Steel, No Choil and Nuclear Meltdown Treatment on the Spine and Edges
    This is Brand New Purchased directly from Busse Combat. These Boss Jack have been discontinued and have been Sold out so get this now while you can!

    In 2010 Jerry Busse introduced the Boss Jack and they were a great hit because of the size and these were similar to the Straight Handle Satin Jack but with a newer twist. The Boss Jack models were available for order for a bit and than discontinued. At that time, the .18" thick Saber Ground Boss Jacks were only available in the Limited Edition with or without the Choil! This knife starts with a Limited Edition blank. Keep in mind without the Choil, the cutting edge is longer and this knife will weight just a tab bit more. This is a beautiful Custom with Custom Hand Smoothed Red/Black G10 G-rexed Alligator Tooth Matrix Bolstered Curly Oak Handle finished off with Mosaic Pins & White Liners. With the hand smoothed handles, it's thicker to fit your hand much better and feels much more comfortable in your hand. You can tell a lot of time, thought, planning and work went into the making of this knife! This is Brand New, never used, carried or sharpened.

    $1050
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Scrap Yard Knife Company Military Over Run Dog Soldier 8 .22" Saber Ground Desert Camo Blade w/Fuller, Tan Resiprene C Handle
    Dog Soldier 8
    7.75" Blade Length 12.9" Overall Length 1.55" Blade Width .22" Blade Thickness 12.6 Ounces
    Saber Ground Desert Camouflage Blade with V-Ground Edge
    Tan Resiprene C Handle
    INFI Blade Steel, Full Size Choil, Sterile (No Markings or Logo) Blade, Fuller (Blood Groove)
    This was Brand New from the OP2W-HOGanzaaa and an Exclusive for ONLY this online Ganza! This Dog Soldier 8 Model with the Sterile Desert Camouflage Blade was ONLY available for sale in the one Ganza and was discontinued and never done again.

    The Scrap Yard Knife Company Military Over Run Dog Soldier 8 was just introduced by Jerry Busse for the OP2W-HOGanzaaa in October of 2015 and already has been discontinued. Busse Combat has military contracts and this is one of the knives that were made for them but there seem to be too many made so Busse than sells them off. Most of the military knives are all Sterile so nobody can tell who makes them should the weapons get into the wrong hands. I would say this knife is very similar to the Busse Combat Basic 8 but just a tiny bit shorter and with a Fuller (Blood Groove). This knife has a Saber Ground Desert Camouflage Blade with V-Ground Edge. This has a Tan Resiprene C Handle which is a softer handle for better more comfortable handle that's similar to a rubber handle and will absorb the impact when using the knife. This model was very limited in number and was only available in a Ganza and are already all sold out! Many people order this knife and few were able to score one. This is Brand New, never used, carried or sharpened.

    $400
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat 2nd Gen Ergo Battle Mistress .24" Saber Ground Black Crinkle Blade, Textured Magnum Black/Tan G10 Handle
    2nd Gen EBM - Second Generation Ergo Battle Mistress
    9.5" Blade Length 15.4" Overall Length 1.7" Blade Width .24" Blade Thickness 23.2 Ounces
    Flat Saber Ground Black Crinkle Blade with a V-Ground Edge
    Textured Magnum Black/Tan G10 Handle
    INFI Blade Steel, Full Size Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. This Model was available for "Operation Two Weeks" starting April 27, 2016 through May 2, 2016 and has been discontinued so can no longer be order from the Busse Company Website! The Second Generation Ergo Battle Mistress is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The Battle Mistress Ergo - BMe was introduced by Jerry Busse in 2001 and has since been discontinued. Many didn't think it looked well but those that have handled it know the ergo handle felt great in the hand and the INFI steel would handle anything you can put it through. After about 15 years, Jerry changed the design to make this better and keep everything else that worked before and this the Second Generation Ergo Battle Mistress was introduced and has since been discontinued. It was part of "Operation Two Weeks" and was available for pre-order at that time. The catch was this was only available in Combat Grade meaning INFI steel but with a coating. So there were no Satin Finish available yet. This has a Flat Saber Ground Black Crinkle coated Blade with a very sharp V-Ground Edge which is Razor Sharp! The handle is a Textured Magnum Black/Tan G10 Handle. This is Brand New, never used, carried or sharpened.
    $1000
     
    Last edited: Nov 28, 2018
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom John W. Smith F-5 Damascus Blade, w/Zirconium Bolstered Mokuti Scales
    Blade Length: 3.8″
    Overall Length: 8.7"
    Blade Thickness: .155"
    Blade Steel: Stainless Damascus
    Blade Grind: Saber Ground Re-Curved Blade with V-Ground Edge and Un-Sharpened Swedge
    Handle: Hand Polished Zirconium Bolster with Contoured & Sculpted Chad Nichols Mokuti Scales
    Pocket Clip: Tip Up Carry Polished Zirconium
    Liners: Blue Anodized Titanium
    Weight: 7.3 Ounces
    John W. Smith has been making knives for over 20 years. A voting member of the Knifemakers Guild, John is best known for his work in embellished locking folders and occasionally art fixed blades. Since 1994, he has produced his own Damascus, creating knives that feature intricate engravings, carvings and inlays and showcasing a preference towards natural handle materials. It’s this attention to detail that sets John’s work apart from the rest. John W. Smith has recently introduced and and starting making the new F5 flipper. John W. Smith is known for his meticulous attention to detail. The luxury of the Dauntless JW Smith's knives doesn’t stop at the execution. Each material was carefully chosen to enhance Smith’s craftsmanship. Inspired from the romantic ideal that was early knifemaking, each handle is crafted with Hand Picked Zirconium and placed alongside modern, Zirconium bolsters with a clean, Hand Polished Finish. The contrast of these two dichotomous materials results in an elegant, but striking aesthetic.

    John W. Smith is a tactical folding knife legend. His pieces can be hard to come by, and when they do come around there isn't much hesitation. The reason is these custom pieces are a part of knife making history. Simple, purposeful, flawlessly executed. This F5 Flipper model is brand new model. Pristine, custom made recurve spear point tactical blade shape with a clean upper un-sharpened swedge grind. They are truly a thing of beauty to behold. Smooth opening action via an integral flipper tab that creates a fine finger guard when open. John has done a Hand Finished Blue anodized Liners so that it matches the Blue Mokuti Scales. The combination of jimping on the backspacer with contoured jimping on the thumb ramp provides consistent traction and a visually smooth transition between the two sections. An inside peek at the liner lock construction shows that Smith covertly included jimping on the inside there as well for traction wherever you need it. The initials JWS appear at the lock like most of his customs. This knife has a strong detent to prevent it from falling open when not engaged. The Flipping/Opening action if fast and smooth with a solid early lockup without any blade play in any direction. The blade of perfectly centered as you can see from the pictures. The dark Hand Polished Zirconium Bolster and Pocket clip really is bold and stands out against the contrast of the entire knife. The ergonomics on this one is off the charts comfortable. This is a full blown "One of a Kind" custom! You can tell a lot of thought, planning, and work went into building this "Grail Knife!" This will come with a beautiful Red/Blue patterned cloth from John W. Smith for storage and transportation. This is Brand New from a private collection where it was kept as a safe queen. Because this was pre-owned I am going to list this a used and this is being sold as is. Please look at the pictures to see the actual condition.

    $3000
     
    Last edited: Dec 20, 2017
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop War Train Handcar .162" Flat Saber Ground Satin Blade, Full Stacked Bones in Black Resin Handle w/German Nickle Silver Tubes & Black Liners
    War Train Handcar - WTH
    4.4" Blade Length 9.15" Overall Length 1.7" Blade Width .16" Blade Thickness 7.9 Ounces
    Flat Saber Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Full Hand Smoothed Full Stacked Bones in Black Resin Handle w/German Nickle Silver Tubes & Black Liners
    INFI Blade Steel
    This is Brand New purchased directly from Busse Combat at the 2017 Blade Show in Atlanta Ga. This knife was introduced were available for sale on 2/17/16 and were sold out before 2/20/16 and has been discontinued.

    Jerry Busse introduced the Battle Grade War Train Handcar in February of 2016 and this model has long been discontinued. This Design comes from the War Train but since that one is HUGE and a Heavy beast, this is the smaller version for smaller tasks. This being smaller with a wide blade makes it easier to control for tasks suck as skinning game. The War Train and the War Train Handcar were available in the Satin blade as the Limited Edition and a more affordable Battle Grade coated SR101 version. There were a huge difference in the price between the two versions. These were only available for two weeks! Well the Busse Custom shop went all out and grabbed a 2 to 3 of the Limited Edition blanks and made custom beautiful ones for the 2017 Blade Show! This knife has a Flat Saber Ground Hand Finished Satin Blade with a Fine V-Ground Edge. Then they went all out and did a beautiful job going all out and making a Custom Full Hand Smoothed Full Stacked Bones in Black Resin Handle finished off with German Nickle Silver Tubes filled with Black Resin & Black Liners. This has a smaller handle which allows you to hold in many different ways which would make this a great skinner. Get this "One of a Kind" knife while you still can. This was purchased directly from Busse Combat by myself. There were 3 customs made and was only available at the Blade Show. This is Brand New, never used, carried or sharpened.

    $800 Sold Pending Funding
     
    Last edited: Dec 8, 2017
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Elmax Lil Smokey .095" Satin Blade, Oak Wood & Black/Tan G10 G-rexed Giraffe Bone Handle w/Mosaic Pins
    Elmax Lil Smokey
    2.7" Blade Length 6.25" Overall Length 1.05" Blade Width .095" Blade Thickness 2.9 Ounces
    Flat Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Hand Shaped/Smoothed Wood & Black/Tan G10 G-rexed Giraffe Bone Handle w/Mosaic Pins
    Elmax Blade Steel, Small Choil
    This is Brand New purchased directly from Busse Combat. The Elmax Lil Smokey is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The Elmax Lil Smokey was introduced by Busse at the 2015 Blade Show and nobody knows if Busse will ever make any more. This knife is one of the rare knives that Busse didn't use INFI Steel on, this one is made of Elmax Steel and is super thin and even Sharper! This knife has Flat Ground Hand Finished Satin Blade with a Fine V-Ground Edge! The Busse Custom Shop than went all out on the handle and went with a Custom Hand Shaped/Smoothed Oak Wood & Black/Tan G10 G-rexed Giraffe Bone Handle finished off with Mosaic Pins! This is a very special and different sort of handle as it starts off with a Oak Wood which was also layered with Black and Tan G10 and than darker pieces of Giraffe Bone Scales were than added. This was than Hand Shaped so that where the bolsters are, they are thinner so that this handle contours to your hand. this is than hand smooth. As you can tell a lot of planning, thought, and work went into making this little beauty. This knife is Brand New: never used, carried or sharpened. This was heat treated by the infamous Busse Combat which is the best in the World!

    $340
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Flak Jack Battle Grade .175" Flat Ground Brown Cerakote Camouflage, Standard Textured Handle
    FJ BG- Flak Jack Battle Grade
    6.15" Blade Length 11.75" Overall Length 1.35" Blade Width .175" Blade Thickness 11.9 Ounces
    Flat Saber Ground Earth Brown Cerakote Camouflage coated Blade with a Swedge and a V-Ground Edge
    Standard Textured Coated Handle (underneath the coating can be either Canvas Micarta or G10)
    SR101 Blade Steel, Short Armored Swedge (SAS), Full Size Choil & Skull Crusher
    This is Brand New purchased directly from the Busse Combat. The FJ - Flak Jack was available for order on 9/27/18 and was SOLD OUT in one day!
    This has been discontinued by Busse Combat and no longer be ordered so get this before it's gone!

    The FJ - Flak Jack was introduced on 9/26/18 by Jerry Busse for pre-order and have since than been discontinued after being sold out after one day.
    Here is what Jerry Busse said about the introduction o this model:

    This lightweight blade is perfectly suited for use as a day-camper/hiker and is torqued and ready for heavy abuse on the battlefield. [​IMG]

    The Short Armored Swedge (SAS) reinforces the point while greatly increasing penetration. :cool: It does all of this without sacrificing the beloved real estate of those who love to baton the spine while prepping for campfires, shelter building, etc. . . [​IMG]:cool:

    The all new "Flak Jack" will leave those who are lucky enough to score one absolutely gobsmacked! :eek:o_O

    The Flak Jack is destined to make an important addition to any collector's or heavy abuser's war chest. :cool:

    There are 5 renditions of this wicked blade available, including a Very Limited INFI Edition from the Busse Custom Shop, a Satin Finished INFI edition, a BIG DC INFI edition, a coated INFI Combat Grade edition and an SR-101 Battle Grade edition!


    There were a total of 5 Editions of this model and this one is the Doublecut or otherwise know as a Battle Grade version. This particular knife is different and special in that Busse may have done a few in a Cerakote Camouflage for those that are looking for something a bit different. This knife was coated in a Black, Brown and Bronze Cerakoted Blade with a Swedge and a Fine V-Ground Edge. As you have read Jerry Busse's description, this knife was made to be used for your one knife for camping. So this is about the average size with thinner blade for a lighter carry and designed and shaped for the best strength and utility. This has a new cerakote design which has different shades of camouflage in different random patterns throughout the entire knife. The Cerakote coats not only the blade but the Standard Textured Handles and protects it. The actual handle material is unknown can be either canvas micarta or G10, and because it is coated, is not known but will still have the lifetime guarantee. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this cerakote pattern on their knives and will never do it again, so get this now!This has a SR-101 Steel that is a incredible .175" thick. This maybe be the only one done like this as it may be a sample for the pattern.
    $380
     
    Last edited: Aug 24, 2019
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Game Warden .22" Flat Ground Satin Blade, Textured Black Paper Micarta Handle w/Green Liners
    GW - Game Warden
    3.05" Blade Length 7" Overall Length 1.05" Blade Width .22" Blade Thickness 6.3 Ounces
    Flat Ground Hand Finished Satin Blade with V-Ground Edge
    Textured Black Paper Micarta Handle w/Green Liners
    INFI Blade Steel with Small Choil
    This is Brand New direct from the 2010 AG Russell Knife Show in AR on 7/31/10. The Game Warden has long been discontinued and is no longer being made so get this while you can!

    The Game Warden was introduced by Jerry Busse in 2006 and has long been since discontinued. Over the years there have been a few different grinds and thickness of this model only because it's a great knife and everyone can't get enough of these as they fit in the hand so well. This one was a hand made custom made by the Busse Custom Shop just for the 2010 AG Russell Knife Show in AR! This one has a thick .22" Flat Ground Hand Finished Satin Blade with V-Ground Edge that is Razor Sharp! The Busse Custom Shop went with a slightly different shape on this warden and most metal was taken out of the sweep of the blade making this more pointy so if you look at the blade, you will notice this has a trailing point tip Blade shape which give this knife a more aggressive tip!. Then they went with a Textured Black Paper Micarta Handle and finished it off with Green Liners. The Green Liners really make this knife stand out and at the same time, adds to the thickness of the handle so that it fits into the palm of your hand. Custom knives like this were never a production and only a few were ever made for the knife shows. This is Brand New, never used, carried or sharpened.

    $500
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Boss Jack .182" Saber Ground Satin Blade w/Choil, Red/Black G10 G-rexed Stacked Bone in Clear Red Resin Handle w/Mosaic Pins & Red Liners
    Boss Jack - BJ
    6.3" Blade Length 11.25" Overall Length 1.2" Blade Width .182" Blade Thickness 10.7 Ounces
    Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smoothed Red/Black G10 G-rexed Stacked Bone in Clear Red Resin Handle w/Mosaic Pins & Red Liners
    INFI blade Steel, Full Size Large Choil with Nuclear Meltdown Treatment on the Spine and Edges
    This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta Ga. The Boss Jack is no longer available for sale and has been Discontinued!

    The Boss Jack was introduced by Jerry Busse in 2010 and has long since been discontinued. These were never made as a production with the Custom Handle like this one. This knife uses the same blanks as the Boss Jack Limited Edition Knives except instead of the Blended Convexed Edge, this one has a rare V-Ground Edge. The Busse Custom Shop went all out on this one and put a lot of thought and work into making this Hand Smoothed Red/Black G10 G-rexed Stacked Bone in Clear Red Resin Handle finished off with Mosaic Pins & Red Liners. On the Limited Editions the handle options were either G10 or canvas Micarta. I also have other one made from different types of wood/G10/micarta avail for sale also in both coated blades and satin. This is Brand New, never used, carried or sharpened.

    $1000
     
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat 2nd Gen Steel Heart Ergo .255" Saber Ground Black Crinkle Blade, Textured Magnum Yellow/Black G10 Handle
    2nd Gen SHE - Second Generation Steel Heart Ergo
    7.5" Blade Length 13.45" Overall Length 1.7" Blade Width .255" Blade Thickness 21.22 Ounces
    Flat Saber Ground Black Crinkle Blade with a V-Ground Edge
    Textured Magnum Yellow/Black G10 Handle
    INFI Blade Steel, Full Size Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The Second Generation Steel Heart Ergo is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!
    The Steel Heart E - SHE was introduced by Jerry Busse in 2001 and has since been discontinued. Many didn't think it looked well but those that have handled it know the ergo handle felt great in the hand and the INFI steel would handle anything you can put it through. After about 15 years, Jerry changed the design to make this better and keep everything else that worked before and this the Second Generation Steel Heart Ergo was introduced by Jerry Busse in December of 2015 and has since been discontinued. It was part of "Operation Two Weeks" and was available for pre-order at that time. The catch was this was only available in Combat Grade meaning INFI steel but with a coating. So there were no Satin Finish available yet. This has a Flat Saber Ground Black Crinkle Blade with a very sharp V-Ground Edge which is Razor Sharp! The Busse Custom Shop did something different with the handles and went with a non standard optional color for this show and did a Textured Magnum Yellow/Black G10 Handle. For those that do know, Yellow and Black are the Busse colors. This is Brand New, never used, carried or sharpened.
    $550
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat 2nd Gen Steel Heart Ergo .26" Saber Ground Metallic Bronze Blade, Textured Magnum Tan G10 Handle
    2nd Gen SHE - Second Generation Steel Heart Ergo
    7.5" Blade Length 13.45" Overall Length 1.7" Blade Width .26" Blade Thickness 21.7 Ounces
    Flat Saber Ground Metallic Bronze Blade with a V-Ground Edge
    Textured Magnum Tan G10 Handle
    INFI Blade Steel, Full Size Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The Second Generation Steel Heart Ergo is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!
    The Steel Heart E - SHE was introduced by Jerry Busse in 2001 and has since been discontinued. Many didn't think it looked well but those that have handled it know the ergo handle felt great in the hand and the INFI steel would handle anything you can put it through. After about 15 years, Jerry changed the design to make this better and keep everything else that worked before and this the Second Generation Steel Heart Ergo was introduced by Jerry Busse in December of 2015 and has since been discontinued. It was part of "Operation Two Weeks" and was available for pre-order at that time. The catch was this was only available in Combat Grade meaning INFI steel but with a coating. So there were no Satin Finish available yet. This has a Flat Saber Ground Metallic Bronze Blade with a very sharp V-Ground Edge which is Razor Sharp! The Busse Custom Shop did something different with the handles and went with a non standard optional color for this show and did a Textured Magnum Tan G10 Handle. This Metallic Bronze coating is not standard and was only available for certain shows or offereings. This is Brand New, never used, carried or sharpened.
    $550
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]
    [​IMG]
    Scott Cook Custom "Off the Bench" Non-Typical Lochsa "FireClone" Damascus Blade with Mother of Pearl/Abalone Inlays
    3.45" Blade Length
    8.15" Overall Length
    .125" Blade Thickness
    1.1" Blade Width
    4.3 Ounces

    Norris "FireClone" Damascus Saber Ground Blade with V-Ground Edge
    Mother of Pearl/Abalone Inlays
    Solid 14K Gold double thumb lugs
    Handle texturing on Contour Shaped Integral Ti-6Al-4V Titanium Handle
    Mother of Pearl pivot pin & Handle inlay
    Newest Style Custom Clip with "Tip Up" carry
    Custom Mother of Pearl/Abalone Bead on Black Leather Lanyard
    Scott Cook Warranty Card with Date of Completion is August 2018
    Pivot Adjustment Tool


    Scott Cook made his first knife in 1991 and has only gotten better with each year. He is the very first knife maker to do the Integral folder and many have followed in his footsteps since his creation. An Integral Folder has the entire handle frame of the knife machined from a single piece of titanium. There are no stand offs, back-spacer etc. The entire handle is one piece, so if you didn't already know, it takes a lot of skilled work and many years of experience to come to this level. This is an enormous engineering and machining challenge which takes a lot of skills and knowledge. Since Scott was the very first person to create the Integral Folder, he has been doing it the longest and now has past the normal stages and has brought it to the next level. Since Scott's books are closed (no longer taking orders) he will make a full blown custom every once in a while and post them up for auction on his webpage and that's the only way to get one of these "Off the Bench" Non-Typical Lochsa Integral Folder!
    The FireClone Damascus is a complete custom steel made by that only Mike Norris makes! He uses Sandvik 19C27, D2, and 302 SS to create tapestries in stainless damascus in a pattern that is not just functional but also beautiful. Typical hardness for this material, when finished into blades, is HRC 58-60. Scott Cook hand ground this beautiful damascus to a flat Saber ground blade with a swedge on the front and top of the blade. This blade was finished off with a sharp V-Ground Edge. Installed on the blade are Solid 14K Gold double thumb lugs for manual opening. Scott Cook made a custom Abalone Bead to match the pivot and the largest circle inlay. There are six additional inlays of Mother of Pearl to offset the handle and change out the pattern on a contoured hand rubbed satin midsection. The front and back are textured for better grip and to offset the beautiful polished mid section but giving it more of a bolstered look. The side or where the spacers on a folder would be is still that one solid piece and it's also used as the blade stop. It is finished in a beadblast including the taper. At the butt of the knife, there are two holes made for the Lanyard for the custom made Abalone Bead on Black Leather Lanyard to match the Abalone Pivot Pin and Abalone inlay circle! Right below the lanyard holes on the knife, Scott Cook initials the knife with a SC so you can tell it's his one of his real custom knives. This has a Solid lockup with a smooth manual opening Centered Blade! There is no blade wiggle or play in any direction as the lockup on this knife is insane! This comes from my personal collection and I purchased this directly from Scott Cook. This will come with the box, Date of Birth Card, Tool, Ribbon, Abalone Bead on Black Leather Lanyard, and wrapping. As you can see, this knife was finished in August of 2018, so this is about as new as you are going to get. This is Brand New: never used, carried or sharpened! DEAD MINT! Please ask all questions and for all additional pictures prior to purchase as all sales are final. Because of the price of this custom, I would suggest if you are seriously interested in this knife that you give me a call or text before purchase.

    $6500
     
    Last edited: Sep 11, 2018
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame Winged Paw Sledge Tri Spin 3D Bronze Slug
    These are Stainless Steel with winged paw etched. 3D Bronze Paw center. Finished in our Signature Heat treated Vintage Gunmetal™. Also with our signature Screw bearing retention and O-ring button base. They run on R188 One Drop bearings. Here is the newest spinner that has the newest fastest and quietest bearings. It's a bit smaller and lighter then the square ones. Very limited in production and quantity.

    If you are looking at this, you probably know what you are looking at. This is a sweet spinner that is super high in demand. The reason for the demand is because of the quality and collectibility of everything Derrick/Leonard of Steel Flame . The Spinner itself is marked "Steel Flame" on the bottom. The bottom is all Steel Flame Hallmarks marked Honor, Gratitude, and Respect on the bottom as seen in the pictures. This spins freely without any problems. You can text me at the number listed below to see actual pictures of this spinning. This is Brand New, never carried or used. This does have a pouch, sticker and extra O rings. This is a high quality and of the best craftsmanship. Everything will come as it came from directly from Steel Flame. Everything in the pictures is included.
    $550
     
    Last edited: Apr 3, 2018
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Magnum Silent Knight .25" Convexed Satin Blade, Magnum Hand Smooth/Shaped SOS Orange G10 Handle
    Mother Of All Silent Knights - MOASK
    14" Blade Length 19.5" Overall Length 1.75" Blade Width .25" Blade Thickness 24.8 Ounces
    Full Height Flat Ground Hand Finished Satin Blade with Blended Convexed Edge
    Custom Magnum Hand Smooth/Shaped SOS Orange G10 Handle
    INFI Blade Steel with Large Choil & Blade Catcher
    This is Brand New purchased directly from Busse Combat at the 2015 Blade Show in Atlanta Ga. The Silent Knight was never available for sale through the Busse Combat website because only a handful were made for shows and Ganzas and this has been Discontinued!

    I guess we can call this a Magnum Mother Of All Silent Knights (MOASK) which was introduced in 2006 but if you look at the measurements, this has a longer blade and overall so this may be the biggest Silent Knight ever made! These have been the one of the Ultimate Grail knives for all Busse collectors since so few were ever made and so very hard to come by. These Silent Knight are made to be the Ultimate Fighting knife and I feel they may be. These are thin and not too thick so it is not heavy. The handle is shorter for one hand only and has a nice long re-curve blade and has the blade catcher on the top! This particular one was made by the Busse Custom Shop and brought to the 2015 Blade Show. Not many of these were ever made so still very hard to find to purchase. This is a "One of a Kind" and there are no other like this in the world! The Flat Ground Satin Blade with Blended Convexed Edge is Razor Sharp. This may be your only chance to own one of these rare knives as nobody knows if Jerry Busse will ever make any more! These Silent Knight are very very rare and not many were ever made. The Busse Combat Custom Shop did a Custom Magnum Hand Smooth/Shaped SOS Orange G10 Handle. A true Busse Grail Knife! This has a INFI Steel that is .25" Satin Blade! This is one monster of a Fighter, with a blade catcher on the top! INFI is a proprietary Steel is used by Busse Combat Knives. This is Brand New, never used, carried or sharpened as I bought this directly from Busse Combat.
    $2600
     
    Last edited: Jan 16, 2018
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Urban Fudge .325" Saber Hollow Ground Satin Blade, Full Purple Heart Wood Handle w/Solid Brass Pins & Red/Yellow Liners
    Urban Fudge - UF
    5.8" Blade Length 10.75" Overall Length 1.2" Blade Width .325" Blade Thickness 14.6 Ounces
    Hand Ground Saber Deep Hollow Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Shaped/Smoothed Full Purple Heart Wood Handle w/Solid Brass Pins & Red/Yellow Liners
    INFI Blade Steel at 58-60Rc with Choil with NO Swedge
    This is Brand New straight from the Busse Custom Shop! This Urban Fudge model was available for sale starting March 9th 2016 through March 14, 2016 and has been discontinued so can no longer be order from the Busse Combat.
    Jerry Busse first introduced the Urban Grudge in March of 2010 in a online Ganza and has been discontinued. When the Urban Grudge was offered, it was only available with a Doublecut (bead-blasted) Blade finish with Black Canvas Micarta. This knife comes from the original HG55 design but they took off CBT (Corrugated Bevel Technology) and shortened and reshaped the handle to make it shorter and fit the handle better. And since the HG55 was a fighter knife, so is this one! This one is the New version in a Bombproof FAT version. These are all done through the Busse Custom Shop with Deep Hollow Ground blade on a .325" Blank. This is a Full Blown Custom finished off WITHOUT a Swedge, V-Ground Edge and a Hand Finished Satin Blade. The normal Urban Fudge has a swedge but this one does NOT! The Busse Custom Shop went all out on the handle and did a Custom Hand Shaped/Smoothed Full Purple Heart Wood Handle w/Solid Brass Pins & Red/Yellow Liners finished off with Solid Brass Pins & Red/Yellow Liners. You can tell a lot of thought, planning and work went into making this beautiful knife. This was purchased directly from Busse Combat Custom Shop by myself. There were not many of these made and was only available much less a full blown custom and it has already been discontinued. This is Brand New, never used, carried or sharpened.
    $1300
     
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Urban Fudge .325" Saber Hollow Ground Satin Blade, Blue/Black G10 G-rexed Black/White G10 Bolstered Blue Mammoth Tooth Handle w/Mosaic Pins & Blue Liners
    Urban Fudge - UF
    5.85" Blade Length 10.75" Overall Length 1.2" Blade Width .325" Blade Thickness 15.8 Ounces
    Hand Ground Saber Deep Hollow Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smoothed Blue/Black G10 G-rexed Black/White G10 Bolstered Blue Mammoth Tooth Handle w/Mosaic Pins & Blue Liners w/Mosaic Pins & Blue Liners
    INFI Blade Steel at 58-60Rc with Choil with NO Swedge
    This is Brand New straight from the Busse Custom Shop! This Urban Fudge model was available for sale starting March 9th 2016 through March 14, 2016 and has been discontinued so can no longer be order from the Busse Combat.

    Jerry Busse first introduced the Urban Grudge in March of 2010 in a online Ganza and has been discontinued. When the Urban Grudge was offered, it was only available with a Doublecut (bead-blasted) Blade finish with Black Canvas Micarta. This knife comes from the original HG55 design but they took off CBT (Corrugated Bevel Technology) and shortened and reshaped the handle to make it shorter and fit the handle better. And since the HG55 was a fighter knife, so is this one! This one is the New version in a Bombproof FAT version. These are all done through the Busse Custom Shop with Deep Hollow Ground blade on a .325" Blank. This is a Full Blown Custom finished off WITHOUT a Swedge, V-Ground Edge and a Hand Finished Satin Blade. The normal Urban Fudge has a swedge but this one does NOT! The Busse Custom Shop went all out on the handle and did a Custom Hand Smoothed Blue/Black G10 G-rexed Black/White G10 Bolstered Blue Mammoth Tooth Handle finished off with Mosaic Pins & Blue Liners. They matched everything up so well with the Blue on this knife which is really quite unique. You can tell a lot of thought, planning and work went into making this beautiful knife. This was purchased directly from Busse Combat Custom Shop by myself. There were not many of these made and was only available much less a full blown custom and it has already been discontinued. This is Brand New, never used, carried or sharpened.
    $1700
     
    Last edited: Feb 26, 2018
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CS474 Busse Combat Custom S.L.U.T. Active Duty - AD .22" Deep Hollow Ground Satin Blade, Full Fossil Bark Handles Bark Handle with Mosaic Pins
    Active Duty S.L.U.T.- Super Lightweight Ultra Thick with Skeletonized Handle
    3.6" Blade 7.9" Overall 4.505 Ounces
    .22" Blade Thickness Deep Hollow Ground
    INFI Blade Steel
    Fossil Bark Handles Bark Handle with Mosaic Pins
    $1400
     
    Last edited: Jun 19, 2018
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Elmax Lil Smokey .097" Satin Blade, Ivory White G10 G-rexed Green Spalted Maple Handle w/German Nickle Silver Tubes
    Elmax Lil Smokey
    2.7" Blade Length 6.2" Overall Length 1.05" Blade Width .097" Blade Thickness 2.9 Ounces
    Flat Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Hand Smoothed Ivory White G10 G-rexed Green Spalted Maple Handle w/German Nickle Silver Tubes filled with Clear Orange Resin
    Elmax Blade Steel, Small Choil
    This is Brand New purchased directly from Busse Combat. The Elmax Lil Smokey is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The Elmax Lil Smokey was introduced by Busse at the 2015 Blade Show and nobody knows if Busse will ever make any more. This knife is one of the rare knives that Busse didn't use INFI Steel on, this one is made of Elmax Steel and is super thin and even Sharper! This knife has Flat Ground Hand Finished Satin Blade with a Fine V-Ground Edge! The Busse Custom Shop than went all out on the handle and went with a Custom Hand Smoothed Ivory White G10 G-rexed Green Spalted Maple Handle finished off with German Nickle Silver Tubes filled with Clear Orange Resin! This is a very special and different sort of handle as it starts off with a very rare Ivory White G10 and than the Green Spalted Maple Scales were than added. This was than Hand Smoothed so that where this handle contours to the inside of the palm of your hand. It's the little things if you look closely at this knife that will impress you, like clear orange resin allows light to pass though. As you can tell a lot of planning, thought, and work went into making this little beauty. This knife is Brand New: never used, carried or sharpened.
    $360
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,674
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Heckler & Koch 234316S Magazine P30/VP9 9mm 15rd Black

    Manufacturer: Heckler & Koch
    Part Number: 234316S
    UPC Number: 642230244344
    Category: Handguns - Magazines
    Model: P30
    Caliber: 9mm
    Action: Semi-Automatic

    Heckler & Koch Magazines for P30 models in 9mm 15rd Black
    Heckler & Koch 234316S Magazine P30/VP9 9mm 15rd Black

    Specifications and Features:

    • Manufacturer Number: 234316S
    • HK Factory Magazine
    • Caliber: 9mm Luger
    • Capacity: 15 Round capacity
    • Material: Steel body
    • Polymer floorplate
    • Finish: Black
    • Fits: HK P30, P30L, P30S and VP9
    • Also can be used as an extended magazine in P30SK, USP 9mm Compact, P2000S, and P2000SK
    More magazines for your HK pistol means less time loading at the range. The Heckler and Koch original equipment magazine are a standard factory replacement for the VP9 or P30 pistols. The high-quality steel magazine has a capacity of 15 rounds of 9mm Luger ammunition and a high-quality polymer floorplate. Finished in a non-reflective black coating, it is sure to last a lifetime with proper care. Brane new Factory Sealed
    $35
     

Share This Page