1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

The Big August Knife Sale (Lots o' Custom Balis, Folders and Fixed)

Jimdo Aug 13, 2015

Thread Status:
Not open for further replies.
  1. Jimdo

    Jimdo JDBA4L JDBA Official Member

    1,090
    217
    63
    I have the following for sale.....

    1. Jim Minnick Folder

    Specifications
    Blade Steel : CPM-S35VN Stainless Steel , Two Tone Finish
    Blade Length : 4 in.
    Closed Length: 5 in.
    OAL Length Opened : 9 in.
    “Electric Blue” Anodized Titanium Frame with Micarta Overlays. An amazing Mother of Pearl Skull insert into the Presentation Side Scale. The piece features a Carbon Fiber Pocket Clip and decorative Pivot Screws.
    This is an incredibly smooth folder. I have to suspect that it rides on bearings but don’t know that for sure. It has a very early lockup with perfect blade centering.
    Condition Note : Approximately 98% as received from Mr. Minnick. The original edge appears unused to cut anything. There are a couple light hairline scratches on the non presentation side of the blade. They are only noticeable under the right light and I was not able to take a picture showing them.
    Price: $650.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    2. Sam Eddleman 'Mini Gladiator Flipper'

    Specifications
    Blade Steel : CPM-154CM
    Blade Length : 3 in.
    Closed Length: 4 in.
    OAL Length Opened : 7 in.
    Handles are Green Canvas Micarta over a Titanium Frame.
    This is a very solid little flipper. It's got a great action requiring no wrist movement what-so-ever to quickly and solidly lock into open position. It features an incredibly well executed hybrid grind. It rides on the IKBS Ball Bearing Pivot System and has an early lockup.
    Condition Note: Approx. 98% as received from Mr. Eddleman.
    Price: TRADED

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    3. Marty Young ‘Model 3 Folder’

    Specifications
    Blade Steel : Hand Rubbed CPM-154
    Blade Length : 3 3/4 in.
    Closed Length: 4 5/8 in.
    OAL Length Opened : 8 in.
    Titanium Liners with Carbon Fiber Scales, a titanium belt clip and Orange Peel Titanium Bolsters.
    This knife features a very smooth action with an early lockup. It is slightly off center in closed position, as demonstrated in the pics.
    Condition Note: Approximately 99% as received from Mr. Young.
    Price: $500.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    4. Zero Tolerance 'ZT-9' Bayonet

    Specifications
    Blade Steel : CPM-S30V Stainless Steel
    Blade Length : 7 1/2 in.
    OAL Length : 12 1/2 in.
    G-10 Handle
    1/4 in. thick spine
    Condition Note: 99% as received. Comes with original box and sheath. These are incredibly well made and have long been discontinued. MSRP was $399.95 when they were readily available.
    Price: $325.00

    [​IMG]
    [​IMG]

    5. Howard Clark, M.S. Stamped, Forged L6, Skinner

    Specifications
    Blade Steel : Forged L6 , Cold Blued
    Blade Length : 4 1/4 in.
    OAL Length : 8 1/4 in.
    Stag Handle
    Condition Note: 95% as received from Mr. Clark. The edge appears in original / unsharpened condition. There are a few light rub marks / "scratches" on the blade (presumably from inserting the knife in and out of the sheath). This knife comes with the original sheath as well that is in around 90% condition.
    Price: $425.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    6. Craig Camerer 'One Off Kris Balisong’

    Specifications
    Blade Steel : Craig Camerer Forged W2 Stainless Steel
    Blade Length : 4 1/4 in.
    OAL Length Opened: 9 1/2 in.
    OAL Length Closed : 5 1/4 in.
    This beautiful balisong features 6AL4V Titanium Handles.The titanium handles glide on the W2 blade riding on a caged S.S. Ball Bearing Pivot System. This knife features Dovetailed Lightning Strike Carbon Fiber Inserts and a new Spring Latch System. It is also the very first Kris blade Craig has ever ground. This knife is a great piece of functional art for both the collector and flipper alike (assuming the flipper doesn’t mind losing a few fingers). This knife is indeed double edged, as any Kris knife should be. It’s also sharp as a razor.
    Condition Note : 99 % as received from Mr. Craig Camerer. The only marks on the knife that weren’t on the knife when it was received from Mr. Camerer are where the latch touches the knife handle, they are very faint. Everything else is 100% as received.
    Price: $1,000.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    7. Rudy Ruana / 'Ruana Knife Works' Non-Cataloged 'Model 11A'

    Specifications
    Blade Steel : Oil Quenched High Carbon
    Blade Length : 4 in.
    OAL Length : 7 3/4 in.
    Handle Length : 3 3/4
    Aluminum w/ Elk Antler Handle
    Leather Sheath
    Each Ruana blade is made from high carbon steel that is hammer forged, hollow ground, individually oil quenched, and heat treated using a zone tempering method that makes the spine of the blade a little softer than the cutting edge.
    All Ruana knives are made from tough cast aluminum handles with elk antler inserts and come with a high quality sheath.
    This vintage Ruana knife was made from 1962 - 1983 while Rudy Ruana was still with Ruana Knife Works. This is a non-catalog knife that is a smaller version of the Ruana Model 12 A. It is great for smaller hands."
    Condition Note: Approximately 90% as received. It's quite impressive the shape this knife is in for as old as it is. It appears to be the original edge, though it could use a sharpening.... That said, this is an old knife. There is a small speckle of 'pitting' on the side of the blade on it's presentation side, as shown in the pics.
    Price : $450.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    8. Shadow Tech Knives

    Specifications
    Blade Steel : 1095 Powder Coated (RC: 57-58)
    Blade Length : 3 1/4 in.
    OAL Length : 7 in.
    Cord Wrapped Handle
    Green DigiCamo Horizontal Carry Kydex Sheath
    Condition Note : ~ 98% ; a few small rub marks on the blade, presumably from the sheath.
    Price : $40.00

    [​IMG]
    [​IMG]

    9. Howard Clark, M.S. 'Damascus Skinner'

    Specifications
    Blade Steel : Howard Clark Forged Damascus (1086 & L6)
    Blade Length : 3 3/4 in.
    OAL Length : 7 in.
    Stag Handle
    Leather Sheath
    Condition Note : ~ 98% as received from Mr. Clark. Original / unsharpened edge. Sheath is in around 90 % condition.
    Price : $400.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    10. Nick Johnson, Para-Cord Wrapped, Drop Point Skinner

    Specifications
    Blade Steel : CPM-3V Stainless (Stone Washed, 3/16 in. Stock)
    Blade Length : 5 1/4 in.
    OAL Length : 9 3/4 in.
    Coated (Extremely Hard) Green Para Cord Wrapped Handle
    Leather Sheath
    Nick Johnson is a relatively new knife maker from the St. Louis area. He has been making for only around three years but pumps out some very impressive cutlery. All the work is sole authorship, including the sheath.
    Condition Note : ~ 99% as received from Mr. Johnson. Original / unsharpened edge. There are some incredibly faint rub marks on the blade from inserting the knife into and out of the sheath. Sheath is in around 95 % condition.
    Price : $325.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    11. Pat and Wes Crawford Damascus & MOP Neck Knife

    Specifications
    Blade Steel : Rob Thomas Damascus
    Blade Length : 3 in.
    OAL Length : 6 1/2 in.
    Presentation Grade MOP Handle
    Molded Kydex Sheath with integrated Turquoise and Wolf Head by 'Semich'
    Each MOP Scale is 1/8 in. thick
    Price : $450.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    12. Nick Johnson, Hardwood Handle, Drop Point Skinner

    Specifications
    Blade Steel : CPM-3V Stainless (Stone Washed, 3/16 in. Stock)
    Blade Length : 5 in.
    OAL Length : 9 3/4 in.
    Hardwood Handle
    Intricate Leather Sheath w/ Fire Starter
    Nick Johnson is a relatively new knife maker from the St. Louis area. He has been making for only around three years but pumps out some very impressive cutlery. All the work is sole authorship, including the sheath.
    Condition Note : ~ 99% as received from Mr. Johnson. Original / unsharpened edge. There are some incredibly faint rub marks on the blade from inserting the knife into and out of the sheath. Sheath is in around 99 % condition.
    Price : $425.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    13. Beretta Avenger II Folder

    Specifications
    Blade Steel : Carbon Fiber Clad VG-10
    Blade Length : 3 1/4 in.
    Closed Length: 4 3/4 in.
    OAL Length Opened : 8 in.
    The Avenger II is a Warren Thomas design and features a tanto VG-10 blade with a carbon fiber laminate on one side, and a carbon fiber handle. Black coated stainless steel clip. Made in Japan. Includes original packaging. Mint condition.
    Condition Note: 100 % NIB. Includes original box and packaging.
    Price: $200.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    14 Mike Alsdorf , Twin Insert , MOP Slipjoint

    Specifications
    Blade Steel : 440-C
    Blade Length : 2 3/8 in.
    Closed Length: 3 1/8 in.
    OAL Length Opened : 5 3/8 in.
    This is a beautifully crafted Mother of Pearl Slipjoint. The fit and finish are remarkable and the attention to detail is very impressive. The frame is Heat Treated 416 Stainless Steel. The MOP inlays are presentation grade.
    Condition Note: The blade is in approximately 98% condition having some faint rub marks and the handles are in around 95% condition showing signs of pocket carry. There are light scratches on the bolsters seen under the right light. The edge is original and unsharpened.
    Price: $300.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    15. RD Nolen , Mother of Pearl Dagger

    Specifications
    Blade Steel : 440-C Stainless Steel
    Blade Length : 5 1/8 in.
    OAL Length : 9 3/8 in.
    Presentation Grade Mother of Pearl Handle
    Nickel / Silver Guard
    Condition Note: The blade is in approximately 95% condition with a few light scratches here and there, visible under the right light. It appears to be unsharpened and unused. The handle is also in around 95% condition with a few light scuffs on the MOP. The silver guard is in around 90% condition with several very light small scratches throughout. This knife comes with a leather sheath.
    Price: $650.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    16. Dan Unger Tanto

    Specifications
    Blade Steel : Clay Hardened Forged W2 w/ Visible Hamon
    Blade Length : 3 3/4 in.
    OAL Length : 8 3/4 in.
    Paracord Wrap Handle
    5/16 in. thick spine
    Condition Note: Approximately 95%. There are a few scratches here and there on the knife and the paracord is slightly off color due to the knife being handled.
    Price: $150.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    17. A.G. Russell "Bolster Lock / Liner Lock ToothPick"

    Specifications
    Blade Steel : ATS-34
    Blade Length : 3 5/8 in.
    OAL Length Opened : 8 in.
    OAL Closed : 4 3/8 in.
    Hardwood Handle, S.S. Liners and Brass Hardware outfit this Folding Toothpick.
    This knife features a unique closing mechanism that is, for all intents and purposes, a liner lock. The unique factor comes from the fact that the liner is integrated into the bolster (for lack of better terminology). I attempted to capture the design in the following pictures.
    Condition Note : 98% plus. It's as new in box. Has the original factory edge. Shows no signs of use or carry. Unfortunately there is no box or papers with this one.
    Price : $90.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    18. Pacific Cutlery International Series

    Specifications
    Blade Steel : 420 C Stainless
    Blade Length : 4 in.
    OAL Length Opened: 9 in.
    OAL Length Closed : 5 in.
    Zamak Channel Constructed Handles
    Locks Closed, doesn’t Lock in Open Position.
    Condition Note : This knife is at approx. 75 % condition. It has some chipping on the handles and some scratches on the blade, as shown in the pics.
    Price: SOLD

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    19. Benchmade 583SBK Tanto

    Specifications
    Blade Steel : 154CM Stainless Steel (58-61 RC)
    Blade Length : 3 1/2 in.
    OAL Length Opened : 8 1/4 in.
    OAL Closed : 4 3/4 in.
    A Valox Handle sets on top of double 420J Stainless Steel Liners on this Assist Opening Benchmade Axis Assist Locking Folder. This knife has been coated with a skull coating and the lanyard with the skull bead has also been added. This knife comes with the original box and pouch.
    Condition Note : The blade on this knife is in around 90% condition. It has the original factory edge but does have some substantial rub marks and scratches on the tip of the blade. The handle is in around 98%, the only thing hurting the handle is that there are some light scratches on the pocket clip.
    Price: $125.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    20. Craig Camerer ‘Spinal Tap Damascus Bowie Balisong’

    Specifications
    Blade Steel : Craigs own forged “Spinal Tap” Damascus
    Blade Length : 4 1/2 in.
    OAL Length Opened : 9 5/8 in.
    OAL Closed : 5 1/4 in.
    This beautiful balisong features 6AL4V Titanium Handles. The titanium handles glide on the “Spinal Tap” Damascus blade riding on a caged S.S. Ball Bearing Pivot System. This knife features Dovetailed Red Carbon Fiber Inserts and features a new Spring Latch System. The Damascus used for this piece is what Craig refers to as his “Spinal Tap” pattern. It is 7 billets of alternating 1084 and 15n20 steels welded together in a low layer twist. The end result resembles Spinal Bones. This knife also features a removable titanium pocket clip. This knife is a great piece of functional art for both the collector and flipper alike.
    Condition Note : 99 % as received from Mr. Craig Camerer. The only marks on the knife that weren’t on the knife when it was received from Mr. Camerer are where the latch touches the knife handle, they are very faint. Everything else is 100% as received.
    Price : $1,000.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    21. Craig Camerer ‘Spinal Tap Damascus Modified Spearpoint Balisong’

    Specifications
    Blade Steel : Craigs own forged “Spinal Tap” Damascus
    Blade Length : 4 1/4 in.
    OAL Length Opened : 9 9/16 in.
    OAL Closed : 5 1/4 in.
    This beautiful balisong features 6AL4V Titanium Handles. The titanium handles glide on the “Spinal Tap” Damascus blade riding on a caged S.S. Ball Bearing Pivot System. This knife features Dovetailed Methyl Carbon Fiber Inserts and features a new Spring Latch System. The Damascus used for this piece is what Craig refers to as his “Spinal Tap” pattern. It is 7 billets of alternating 1084 and 15n20 steels welded together in a low layer twist. The end result resembles Spinal Bones. This knife also features a removable titanium pocket clip. This knife is a great piece of functional art for both the collector and flipper alike.
    Condition Note : 99 % as received from Mr. Craig Camerer. The only marks on the knife that weren’t on the knife when it was received from Mr. Camerer are where the latch touches the knife handle, they are very faint. Everything else is 100% as received.
    Price : TRADED

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    22. Ron Frazier Dagger

    Specifications
    Blade Steel : 440 C
    Blade Length : 4 1/4 in.
    OAL Length : 8 1/4 in.
    Handmade Leather Sheath.
    Snakewood Handle w/ fileworking around the entirety of the tang.
    Condition Note : Approximately 98 % as received from Mr. Frazier. The edge appears to be unsharpened and original. There are a few light scuffmarks here and there on the blade and the handle; this knife is in very good shape for its age.
    Price: $325.00

    [​IMG]
    [​IMG]
    [​IMG]

    23. Chuck Hawes "Small Skinner"

    Specifications
    Blade Steel : Chuck Hawes San Mai (1095 Core w/ Sandvick 12C27 Overlay)
    Blade Length : 3 1/2 in.
    OAL Length : 8 1/2 in.
    Sanbar Stag Handle w/ Mosaic Pin and Fileworked Spine
    Condition Note : 100 % as received from Mr. Hawes.
    Price: $250.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    24. Loyd McConnell 'Drop Point Skinner'

    Specifications
    Blade Steel : S30-V Stainless Steel
    Blade Length : 3 1/4 in.
    OAL Length : 7 1/2 in.
    Handmade Leather Sheath by Mr. McConnell
    Mammoth Ivory Inserts in Engraved S.S. Bolsters and Pommel w/ S.S. Hardware
    Condition Note : This knife is in approximately 98% condition as received from Mr. McConnell. There are very faint scuffs on the mirror polished blade.
    Price: $650.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    25. Qtrmstr (QuarterMaster) 'Marty McFly' Balisong

    Specifications
    Blade Steel : D2 Tool Steel (61-62 RC)
    Blade Length : 4 1/4 in.
    OAL Length Opened : 9 1/2 in.
    OAL Closed : 5 1/4 in.
    This is a unique balisong. It is all American Made and is a limited run of only 300 units. It features a titanium handle and also a patented "BladEXChange" system that allows the user to quickly and easily switch from the trainer blade to the sharp blade. The sharp blade features a compound grind. This knife is # 087 / 300 and it comes with the original box and paperwork.
    Condition Note : The sharpened blade is in approximately 98% condition. It has the original / unsharpened edge and has a few very light spots and light rub marks on it. The trainer blade is in around 85% condition having many more signs of use and quite a few scuffs and scratches. The handles are in approximately 85% as well, having lots of small scuffs and scratches here and there.
    Price: SOLD

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    26. Les Voorhies ‘Small Bowie Balisong’

    Specifications
    Blade Steel : S30V Stainless Steel
    Blade Length : 3 3/4 in.
    OAL Length Opened : 8 1/2 in.
    OAL Closed : 4 3/4 in.
    This little balisong features 6AL4V Titanium Handles w/ Lightning Strike Carbon Fiber Overlays. It glides on the IKBS (Ikoma Korth Bearing System) Pivot System. This balisong flips effortlessly, it’s extremely quick and smooth with little to no handle to blade play. Gotta love IKBS.
    Condition Note : Approximately 97% as received from Mr. Les Voorhies. The only marks on the knife are the scratches on the latch. These are difficult to avoid if you ever latch or unlatch the knife.
    Price : $625.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    27. Gary Wheeler J.S. Damascus Push Dagger

    Specifications
    Blade Steel : 15n20/1075 Forged Ladder Pattern Damascus (324 Layers)
    Blade Length : 4 1/2 in.
    OAL Length : 6 in.
    Handmade, Horizontal Carry, Leather Sheath.
    Madrone Burl Split Tang Handle, double edged blade.
    Condition Note : 100 % as received from maker.
    Price: SOLD

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    28. Benchmade Model 420SBK First Production Run 'Resistor'

    Specifications
    Blade Steel : 154CM Stainless Steel (58-60 RC)
    Blade Length : 3 1/2 in.
    OAL Length Opened : 8 1/4 in.
    OAL Closed : 4 3/4 in.
    This is a First Production Run of a Discontinued Benchmade Model 420SBK. This knife was designed by Mike Snody.
    Condition Note : This knife is in around 98% condition having only a few faint scuff marks on the belt clip. The edge is original and unsharpened. Unfortunately this knife does NOT come with a box or pouch.
    Price: $250.00

    [​IMG]
    [​IMG]
    [​IMG]

    29. Spyderco 'Spyderfly VG-10 Balisong'

    Specifications
    Blade Steel : VG-10 Stainless Steel
    Blade Length : 4 1/8 in.
    OAL Length Opened: 9 1/8 in.
    OAL Length Closed : 5 in.
    This is a fairly rare Spyderfly as it's in VG-10 blade steel. It features S.S. handles and hardware. It rides on a bushing and washer pivot system.
    Condition Note : This knife is around 75% of its original condition. There are some scuffs and scratches on both the blade as well as the handles. There is also what appears to be light specks of rust on the blade. The handles appear to have a light patina on them, if magnified the pics capture this effect. Interestingly, the handles appear to be reversed as well, this is how I received the knife, so.... I left it this way. It's a good user grade knife. It functions and flips well (well, as well as a Spyderfly can flip).
    Price: SOLD

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    30. Cold Steel 'Kwaiken'

    Specifications
    Blade Steel : Damascus
    Blade Length : 6 5/8 in.
    OAL Length : 10 in.
    Hardwood Sheath and handle w/ cloth carrying case.
    There's not a makers mark on this knife to be found. I also DO NOT have the box or papers but the cutlery is indeed a long since discontinued Cold Steel 'Kwaiken' model.
    Condition Note : 98%, everything is virtually NIB but there are some VERY minute scratches on the tip of the blade presumably from inserting the knife into the sheath. Worth noting is that the Damascus steel has a VERY light etch. It's not nearly as pronounced as most of the other Damascus that I have experience with. That said, it was somewhat hard to photograph the 'grain' of the Damascus but under the right lighting it is very attractive and appears to be very well made.
    Price: $200.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    31. Spyderco "Lava" Lock Back Folder (Chad Los Banos Design)

    Specifications
    Blade Steel : VG-10
    Blade Length : 1 7/8 in.
    OAL Length Opened : 5 5/16 in.
    OAL Closed : 3 7/16 in.
    This discontinued Spyderco features a Stainless Steel Handle. Lock Back Design.
    Condition Note : Approximately 90%. The knife shows signs of carry but little to no use. It has the original factory edge and has had the pocket clip removed. The lanyard was added by the previous owner. There are some light scuffs and scratches on both the blade as well as the handle.
    Price : $80.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    32. Spyderco SmallFly Digi Camo Balisong

    Specifications
    Blade Steel : 154CM Stainless Steel
    Blade Length : 3 in.
    OAL Length Opened: 7 1/4 in.
    OAL Length Closed : 4 1/4 in.
    These little Small Flys are getting harder and harder to come by, these days.
    Condition Note : This knife is in around 95 % condition. There are a couple light scuff marks / scratches on the non-presentation side of the blade. The edge is factory sharp and appears to not have been used to cut much at all if anything.
    Price: SOLD

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    33. Cold Steel “Terminator” Push Dagger

    Specifications
    Blade Steel : 440C Stainless Steel
    Blade Length : 3 3/4 in.
    OAL Length : 6 in.
    Knife comes with original box and leather sheath.
    This is Cold Steels first double edged push dagger brought out circa 1990.
    Condition Note : This knife is approximately 98% as received from the factory. It has the original edge and has a few very faint scuff marks on the blade, presumably from taking the knife in and out of the leather sheath.
    Price: $200.00

    [​IMG]
    [​IMG]
    [​IMG]

    34. Chuck Gedraitis “Weehawk Balisong #43”

    Specifications
    Blade Steel : 154-CM Stainless Steel
    Blade Length : 4 in.
    OAL Length Opened : 8 7/8 in.
    OAL Closed : 4 3/4 in.
    This balisong features an excellently ground Weehawk blade riding on a Bushing Pivot System w/ Nylon Washers. It also features 6AL4V Titanium Skeletonized Scales w/ Blue Anodized Holes.
    Condition Note : Approximately 95% as received from Mr. Gedraitis. There are some light scratches on the flats of the blade as well as the handles (as seen in the pics). The blade appears to be all original and unused to cut anything with.
    Price: $650.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    35. Kamman Custom GoldLip Mother Of Pearl Slipjoint

    Specifications
    Blade Steel : 440-C
    Blade Length : 2 3/4 in.
    OAL Length Opened : 6 3/16 in.
    OAL Closed : 3 3/8 in.
    I don't have alot of knowledge on this maker but he makes a helluva well built knife. Extremely tight tolerances and a great fit and finish coupled with the Presentation Grade Gold Lip Mother of Pearl inlaid into the S.S. handles makes for a beautiful little slipjoint.
    Condition Note : Approximately 95% , there are faint scratch marks on the blade and the S.S. handle. There are signs of pocket carry but the edge appears to be all original. This knife comes with a handmade leather sheath as well.
    Price : $250.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    36. Herb Derr Damascus Skinner

    Specifications
    Blade Steel : ‘Birds Eye’ Damascus
    Blade Length : 4 1/4 in.
    OAL Length : 9 in.
    Includes Handmade Leather / Hide Sheath.
    Stabilized Oosik and Hardwood Handle
    Condition Note : The knife is 100% as received from Mr. Derr.
    Price: $250.00

    [​IMG]
    [​IMG]

    37. Microtech ‘Tachyon 1 Balisong’

    Specifications
    Blade Steel : 14-4CrMo
    Blade Length : 3 3/4 in.
    OAL Length Opened : 8 1/2 in.
    OAL Closed : 5 in.
    This is Microtech Knives first ever balisong. It features 6AL4V Channel Constructed Titanium Handles. It rides on a bushing system. This is a highly collectable production balisong. It comes with the original box, papers, nylon sheath and kydex sheath. 100% American Made.
    Condition Note : The Blade is 100% New , the Handles are in approximately 95% condition. They have some “snail trails” in the titanium, as seen in the pics. They show some signs of carry but very little considering the age of the knife. I believe the knife to be unused to cut anything at all, it appears to be the original / unsharpened edge.
    Price: $475.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    38. Protech ‘Flyfather JD Edition #21’

    Specifications
    Blade Steel : 154CM Stonewashed Stainless Steel
    Blade Length : 4 1/4 in.
    OAL Length Opened : 9 1/4 in.
    OAL Closed : 5 in.
    The handle on this knife is comprised of 6AL4V titanium slabs with beveled edges and grooves along the sides. The titanium frame has zen pins and barrel spacer construction while the pivot features 56 ball bearings (14 per pivot side) and set-screw pivots that allow the user to adjust the tension on the blade for smooth and precise action. This is the IKBS Pivot System. This knife features a very unique latch system; it is an arc shape, which allows the blade to extend closer to the bottom edge of the handle when closed. It's a nice touch that makes it possible to have a longer blade than is otherwise possible. The latch also features an integral latch stop which keeps the latch from hitting the blade, a very unique feature! Includes matching anodized pocket clip. This balisong is the only model balisong that Protech has made to date and features the classic blade design of the Protech Godfather. 100% American Made.
    This is the Limited Edition ‘JD Forum’ Flyfather. It comes with the original box and paperwork.
    Condition Note : The Blade is 100% New , the Handles are in approximately 95% condition. They have some “snail trails” in the anodized titanium, as seen in the pics. They show some signs of carry but very little considering the age of the knife. I believe the knife to be unused to cut anything at all, it appears to be the original / unsharpened edge.
    Price: $500.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    39. Bill Luckett 'RazorBack' Sub-Hilt Fighter

    Specifications
    Blade Steel : 440 C Stainless Steel
    Blade Length : 6 1/4 in.
    OAL Length : 11 1/2 in.
    This knife features a beautiful double edged mirror polished blade. It features a S.S. Guard and Pommel w/ a Black Micarta handle and Burgundy / Brass Spacers.
    Condition Note : The knife is in approximately 98 % condition. It has the original edge, from Mr. Luckett. There are no signs or wear or use. However, there is a small discoloration under the makers mark (as circled in red in the pics) and there are also some incredibly minute hairline scratches on the mirror finish (presumably from taking the knife in and out of the sheath). These scratches are impossible, for me, to photograph but are noticeable under the right lighting conditions.
    Price: $675.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    42. Calvin Nichols 'Drop Point Hunter'

    Specifications
    Blade Steel : Flamed Colored Damascus Steel (RC 58-59)
    Blade Length : 5 in.
    OAL Length : 9 1/4 in.
    This knife features beautiful mammoth tooth ivory handles and gold plated screws. The blade and bolsters are Calvins own flamed colored damascus.
    Condition Note : The knife is in approximately 90 % condition. It appears to have the original edge. There is some light pitting on the bolsters and some light 'cracks' in the mammoth tooth ivory which have been present on the knife since I received it some years back.
    Price: $725.00

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    45. William Engle Sub-Hilt Fighter and Hunter ‘Prototype Set’

    Specifications
    Blade Steel : 1/4 in. Thick D2 Steel
    Blade Length : 7 in. (Fighter) & 4 ¾ (Hunter)
    OAL Length : 12 ½ (Fighter) & 9 ½ (Hunter)
    Includes Handmade Wooden Display Case
    Rag Micarta Handles w/ Stainless Steel Hardware and Full Tang Construction. This Prototype Set (marked as such) was made around 2002, the original buyer paid $950.00 for it at that time. Before anyone asks, NO…. I will not break up the set.
    Condition Note : This set is at around 98% as received from Mr. Engle. The Hunter has a few light discolorations where the blade comes into contact with the hilt. The Sub-hilt Fighter is virtually new.
    Price: $825.00

    [​IMG]
    [​IMG]

    As with everything that I sell, if your not 100% satisfied with the purchase you may certainly return the item for a complete refund of the purchase price. I, of course, cannot (and will not) be held liable for the knives AFTER they leave my possession, should the cutlery you purchased be damaged in transport and / or after you receive said cutlery, as unfortunate of a situation as that would be, there will be no refunds from me due to this. All the more reason for you to opt for insurance on the cutlery. Let me reiterate, AFTER the cutlery leaves my possession I will not be held responsible / accountable for it.

    All prices are inclusive of S&H in the U.S., there will be a 4% charge for PayPal, I prefer USPS Money Orders for payment, however. Insurance is up to the buyer. No International Sales. I will wait on personal checks to clear prior to shipping.

    It's YOUR responsibility to know the laws at YOUR location, not mine. Should any of these knives be illegal in your area I highly encourage you NOT to buy them.

    I reserve the right to refuse sales to anyone for any reason. If you have red rep, I won't sell to you, don't ask! You'd only be wasting your time and energy.

    First “I’ll take it” gets the cutlery.

    My paypal address is : jj-guns (at) hot mail (dot) com

    All trades will be considered at this time.

    Thanks for Looking. Feel free to PM me or email me with any questions that you might have. Should my inbox be full feel free to send an email to the above email address.
     
    Last edited by a moderator: Aug 24, 2015
  2. Jimdo

    Jimdo JDBA4L JDBA Official Member

    1,090
    217
    63
    Bump.
     
  3. Jimdo

    Jimdo JDBA4L JDBA Official Member

    1,090
    217
    63
    Bump.
     
  4. Jimdo

    Jimdo JDBA4L JDBA Official Member

    1,090
    217
    63
    Bump.
     
  5. Jimdo

    Jimdo JDBA4L JDBA Official Member

    1,090
    217
    63
    Bump up da jam...... bump it up...... bump it up.
     
  6. Jimdo

    Jimdo JDBA4L JDBA Official Member

    1,090
    217
    63
    Bumpity Bump.
     
  7. gmofo

    gmofo Huge member

    408
    11
    0
    PM sent on this one day or two ago. I want to get it. Awaiting response. Please check your inbox.

    -----
    27. Gary Wheeler J.S. Damascus Push Dagger

    Specifications
    Blade Steel : 15n20/1075 Forged Ladder Pattern Damascus (324 Layers)
    Blade Length : 4 1/2 in.
    OAL Length : 6 in.
    Handmade, Horizontal Carry, Leather Sheath.
    Madrone Burl Split Tang Handle, double edged blade.
    Condition Note : 100 % as received from maker.
    Price: $375.00
     
  8. Jimdo

    Jimdo JDBA4L JDBA Official Member

    1,090
    217
    63
    Email sent. Bump.
     
  9. Jimdo

    Jimdo JDBA4L JDBA Official Member

    1,090
    217
    63
    Bump.
     
  10. gecko7

    gecko7 Little member

    47
    2
    0
    VG-10 Spyderfly

    I'll take the VG-10 Spyderfly
     
  11. Jimdo

    Jimdo JDBA4L JDBA Official Member

    1,090
    217
    63
    Its yours , pending funds. PM Sent.
     
  12. Jimdo

    Jimdo JDBA4L JDBA Official Member

    1,090
    217
    63
    Bump
     
  13. Jimdo

    Jimdo JDBA4L JDBA Official Member

    1,090
    217
    63
    Bump.
     
  14. subieman

    subieman Little member

    19
    1
    3
    zt-9

    ill take the zt-9
     
  15. Gmoney0807

    Gmoney0807 Little member

    8
    0
    0
    Seconds on that ZT-9 Bayonet if still available..
     
Thread Status:
Not open for further replies.

Share This Page