1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice
  1. wolfieuk666

    wolfieuk666 Little member

    17
    1
    0
    I've stripped the new balisong down, first thing that stand out was the hole in the latch for the pin is oversized and the pin sits in it very sloppy,
    all the pivots,bolts and spacers look to be steel, with clear nylon washers on the pivot points, Tang pins are well seated, so I know its never going be anything special but for now I would like to improve it the best I can, so can anyone help me with some better parts to upgrade it a bit, better pivots maybe, bearings not washers, better latch,
     
  2. ratstuph

    ratstuph Hoodoo Operator Super Moderator

    16,008
    2,147
    123
    I moved this from an ill-fated intro...; and sorry to disappoint those of you expecting a naked Brit... :nyancat:
     
  3. apdallaround

    apdallaround K'inich Janaab' Pakal I JDBA Official Member

    7,242
    11,137
    123
    better parts? the parts on it seem fitting to the knife

    nylon washers can always be replaced with something better
     
    Last edited by a moderator: Sep 29, 2015
  4. wolfieuk666

    wolfieuk666 Little member

    17
    1
    0
    it ok found it :)
     
  5. wolfieuk666

    wolfieuk666 Little member

    17
    1
    0
    what to replace the screws cos they are poor and heads have already rounded out so will need drilling out if I want to remove them again, had fun getting them out to strip it this time, pivot ones are ok but having to re-adjust every day after flipping even with lock tight, would like to fit bearings to but there is very little gap between the blade and the handles to allow bearings so would need to file them out I think, my other problem is I work in metric so converting sizes it fun I know the pivot holes are 4mm, however I'm looking out for a better knife maybe a kimura but better but being in the uk limits me very much,
     
  6. san-mai-usa

    san-mai-usa JDBA4L JDBA Official Member

    689
    215
    53
    Yep, can be a pain in the UK with bali's.
    I'm down in London when I'm in the UK.
     
  7. tx101

    tx101 Stuck in the middle with you JDBA Official Member

    1,472
    206
    63
    Balisongs are legal in France, Finland and Austria ..... all within the EU

    To be part of the EU. there must be "Freedom of movement for people and goods".
     
  8. san-mai-usa

    san-mai-usa JDBA4L JDBA Official Member

    689
    215
    53
    We tried that argument with hard core porn and weed from Amsterdam years ago.........
     
  9. laughingbuddha

    laughingbuddha JDBA4L JDBA Official Member

    7,192
    1,386
    123
    Well... that was a disappointment.


    I expected strippers :sosad:
     
  10. san-mai-usa

    san-mai-usa JDBA4L JDBA Official Member

    689
    215
    53
    I can show you my chest again, but I think the last time I did that the pictures were removed...... :ropeman:
    Obviously they offended someone. :devilroll:
     
  11. tx101

    tx101 Stuck in the middle with you JDBA Official Member

    1,472
    206
    63
    Wot ?

    Home grown not good enough ?
     
  12. laughingbuddha

    laughingbuddha JDBA4L JDBA Official Member

    7,192
    1,386
    123
    [​IMG]
     
  13. Linos

    Linos baliholickydexbender JDBA Official Member Knife Maker or Craftsman

    10,583
    1,959
    123
    Ok fine ...don`t cry, here... take your picture back....
    [​IMG]
     
  14. Pinoy Knife

    Pinoy Knife JDBA4L JDBA Official Member

    789
    857
    103
    where did you get the picture of my beloved warewolf Momma??
    ive missed her terribly..
     
  15. san-mai-usa

    san-mai-usa JDBA4L JDBA Official Member

    689
    215
    53
    LMAO....... Where the f*ck do you get them from?:bwah:
     
  16. Linos

    Linos baliholickydexbender JDBA Official Member Knife Maker or Craftsman

    10,583
    1,959
    123
    i get them from Glenn......:realfunny:
     
  17. san-mai-usa

    san-mai-usa JDBA4L JDBA Official Member

    689
    215
    53
    That man has a lot more to answer for than his talent.....
     

Share This Page