1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 8th Thread

Liu Kang May 31, 2015

Thread Status:
Not open for further replies.
  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Direware Solo V-5 Warncliff Flipper, Olive Green Flats/Satin 3V Blade and Full Fullered Titanium Handle
    MODEL: Solo
    OPEN LENGTH: 8.50 inches
    BLADE LENGTH: 3.40 inches
    CLOSED LENGTH: 5.10 inches
    BLADE DEPTH: 1.72 inches
    BLADE THICKNESS: .195 inches
    BLADE MATERIALS: 3V
    HANDLE FRAME: 6AL-4V Titanium
    SPACERS: This model comes with a solid back-spacer made of hardened 440C
    WEIGHT: 9.035 Ounces
    This SOLO is the latest version from Direware and has a 3V satin hawk blade with OD green ceramic flats. The front scale is tumbled titanium with three fullers, tumbled titanium lockside has two fullers. Black ceramic coated backspacer. Blade rides on bearings and is very smooth. The knife is brand new in the box from Direware.
    Sold
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Beefmandu .26" Grey Hollow Ground SR101 Blade, Black Canvas Micarta
    6" Blade Length 11.1" Overall Length .26" Blade Thick 13.09 Ounces
    .26 Deep Hollow Saber Ground Grey Coated INFI Blade with V-Grind Edge
    Textured Black Canvas Micarta Handles
    SR101 Blade Steel
    This is an Exclusive from the Blade 2014 Show.
    This is a very special model that was only sold at one show and couldn't be purchased anywhere else. This is based off the Ratmandu only it is much thicker and .75" longer and has a Deep Hollow Saber Ground with a V-Grind Edge. There were not many made so if you like it, get it before it's gone! The V-Grind Edge is Razor Sharp! This was a very special knife that was only made for that one show and never again! This is Brand New, never used, carried or sharpened.
    Sold
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Small Sebenza 21 CGG "Riddled" S35VN September 24, 2013
    Specifications
    Blade Length: 2.94" (75 mm)
    Blade Thickness: 0.125" (3.175 mm)
    Overall Length: 6.875" (175 mm)
    Handle Thickness: 0.125" (3.175 mm)
    Blade Material: CPM S35VN Stainless Steel
    Blade Hardness: 58-59 RC
    Handle Material: 6A14V Titanium
    Fittings: 303 Stainless Steel
    Thumblug: 6A14V Titanium
    Pocket Clip: 6A14V Titanium
    Weight: 3.0 oz. (85 g)
    Made in USA
    New in Box with Everything you see in the pictures.
    Sold
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Spyderco Matriarch ATS-55 w/River City Sheath Carbon Fiber Kydex Sheath
    3.6" Blade 8.5" Overall .125" Blade Thickness 2.91 Ounces
    ATS-55 Blade Steel
    Seki-City Japan
    Black FRN Handle
    This will come with a Carbon Fiber like kydex sheath with chain.
    Pre-owned in Excellent Condition. I see NO scratches, or signs of use or wear anywhere!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Shop Swamp Rat RMD .17" Saber Ground Satin INFI Blade, Full White Bone Handle with Mosaic Pins & Red Liners
    5.25" Blade Length 10.3" Overall Length .17" Blade Thickness 11.075 Ounces
    INFI Blade Steel
    Saber Ground Satin Blade w/Blended Convexed Edge
    This was a very few of these made by hand by the Custom Shop and I purchased this knife directly from the maker at the Blade 2015. This has a INFI Steel that is .17" thick with a satin Finish! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives and was never avil for this model Swamp Rat Ratmandu before. I purchased this directly from Busse Combat! This knife will carry a lifetime warranty from the Swamp Rat Knife Works!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Anniversary Mean Street .17" Green & Black Cerakoted Blade, Canvas Micarta Handle (1 of 4)
    3.65" Blade Length 8.25" Overall Length .17" Blade Thickness 4.96 Ounces
    Flat Ground with V-Ground Edge
    INFI Blade Steel
    Textured Canvas Micarta Handle
    This is from the Blade 2015 Show in Atlanta Ga.
    This Anniversary Mean Street is a beautiful knife made by Busse Combat. This has a V-Ground Edge. This particular knife was purchased by me directly from Busse Combat at the Blade 2015 Show. There were only 4 of these made in this Green & Black Cerakoted combination. The Cerakote cover not only the blade but the Textured Canvas Micarta Handles and protects it. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, you never know! INFI is a proprietary Steel is used ONLY by Busse Combat knives and is Legendary! This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find as only 4 were ever made for this color/model! This is Brand New: Never Used, Carried or Sharpened!
    Sold
     
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop ASH1 .33" Flat Ground Satin Blade w/Blended Convexed Edge, Magnum Textured Orange/Black G10 Handle
    Anniversary Steel Heart 1
    6.5" Blade Length 11.85" Overall Length .33" Blade Thickness
    The ASH1 was introduced in 2007 and has long since been discontinued.
    Brand new condition with a very sharp Blended Convexed edge.
    This knife has beautiful Satin Blade. The Anniversary Steel Heart 1 in a Satin Finish with a .33" thick was NEVER a production model, the only ones that were made this thick were all coated and were known at "Combat Grade (CG)" This has a INFI Steel that is .33" Blade thickness! INFI is a proprietary Steel is used only by Busse Combat knives. This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find Because this color combination was never offered when it was in production and only a handful ever made! Never Used, Carried or Sharpened!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Hell Razor .21" Black Saber Ground Blade, Magnum Red/Black G10 Handle, No CBTs
    6.8" Blade Length 12.5" Overall Length .21" Thick 16.37 Ounces
    .21" Saber Black Coated Finish INFI Blade with V-Ground Edge and No CBT (Corrugated Bevel Technology)
    This is Brand New from the Spring Knob Creek 2015 Show!
    The Hell Razor was made and introduced in 2005 with CBT (Corrugated Bevel Technology) and has long since been discontinued.
    This was a special Short Run from the Busse Custom Shop made for the two knife shows! The V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .21" thick with Black Coating!
    Sold
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat ASH1 .325" Flat Ground Satin Blade w/Blended Convexed Edge, Magnum Textured Black/Green G10 Handle
    Anniversary Steel Heart 1
    6.5" Blade 11.85" Overall .325" Thick
    The ASH1 was introduced in 2007 and has long since been discontinued.
    Brand new condition with a very sharp Blended Convexed edge.
    This knife has beautiful Satin Blade. The Anniversary Steel Heart 1 in a thick .32" thick was NEVER a production model, the only ones that were made this thick were all coated and were known at "Combat Grade (CG)" This has a INFI Steel that is .325" thick! INFI is a proprietary Steel is used only by Busse Combat knives. This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find Because this color combination was never offered when it was in production and only a handful! Never Used, Carried or Sharpened!
    Sold
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    KC418 Busse Combat ASHBM .32" Jungle Camo Blade w/Choil, Magnum Tan Canvas Micarta Handle
    ASHBM - Anniversary Straight Handle Battle Mistress
    11.1" Blade Length 16.6" Overall Length .32" Blade Thickness 26.3 Ounces
    INFI Blade Steel with a Custom Camouflage Coated Blade Finish
    Full Height Flat Ground Ground w/V-Grind Edge
    This is Brand New purchased directly from the 2014 Spring Knob Creek in KY!
    The Anniversary Straight Handle Battle Mistress has been discontinued and taken off the Busse Combat website so can no longer be ordered.
    Jerry Busse introduced the model Anniversary Straight Handle Battle Mistress in 2013 and this has been discontinued. I purchased this knife directly from Busse Combat at the 2014 Spring Knob Creek in KY. This has a INFI Steel that is .32" thick with a Camouflage coated Blade Finish! The V-Ground Edge is Razor Sharp! This Camouflage coated blade was never an option when you ordered this on the Busse Combat website when this was available for sale. This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives. I purchased this directly from Busse Combat and it was never used, carried or sharpened!
    Sold


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Randall Made Knife Fireman Special
    3.9" Blade Length 8.65" Overall Length .25" Blade Thickness 10.9 Ounces
    Stainless Steel Blade with Thumb Notches
    Single Brass Guard
    Black Canvas Micarta Border Patrol Handle
    Brass Lined Lanyard Hole
    Here is a Beautiful custom made Randall Made Knife Fireman Special. Comes with what you see in the pictures except for the Lanyard which was taken off for pictures. This is pre-owned and may have been carried or lightly used once or twice at best. I see ultra light microscopic superficial scratches on the blade around the edge and light wear on the handle. What you see is what you get.
    Sold
     
    Last edited by a moderator: Dec 24, 2015
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop AK47 .185" Convexed Satin Blade, Textured Olive Green/Black G10 Handle
    American Kenzi 47 - AK47
    18.35" Blade Length 28.85" Overall Length .185" Blade Thickness 30 Ounces
    .185" Full Height Convexed Satin Blade
    Textured Olive Green/Black G10 Handle
    INFI Blade Steel
    The Busse Combat AK47 was first introduced by Jerry Busse in 2005 and back than it was with a coated blade. There were very few made with this Convexed Satin Blade for the shows and Ganza that Busse did. But these Busse AK47 have been discontinued and really sought after but the collectors especially the satin blades. These are nice short swords with a nice thin blade for slicing with a full handle that can be handled with both hands for an average person. This one is Brand New, never used, carried or sharpened. There are not many of these around for sale and are rare when in Mint Condition.
    Sold
     
    Last edited by a moderator: Dec 25, 2015
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop NMFSH .32" Convexed Satin Blade, Black/Grey/Red G10 G-rexed Mammoth Tooth Handle w/Mosaic Pins
    9.5" Blade Length 15.5" Overall Length .32" Thick
    INFI Blade Steel
    Convexed Satin Blade/Edge
    Nuclear Meltdown Treatment on the Spine and Edges
    This in a "One of a Kind" Custom Made by the Busse Custom Shop just for the Blade 2015 Show. This is a knife with Satin INFI Steel! The lack/Grey/Red G10 G-rexed Fossil Tooth Handle w/Mosaic Pins is so Beautiful and so different, I'm impressed! The Mammoth Tooth unlike any I have ever seen Busse use before, this one has incredible colors and patterns that is impossible to describe. It has cracks and breaks in it to show that this is indeed a natural material to show off it's beauty! This is one of the times where you have to hold it to understand it cause my pictures just can't do this knife justice as it is Beauty and Beast at the same time! This one is brand new from The Blade 2015 show. This has a INFI Steel that is .32" thick with a Satin Finish! The Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives and this model was never available for sale and probably NEVER AGAIN! This knife will carry a lifetime warranty from Busse Combat!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat ASHBM .325" Muddy Brown Blade with Choil, Magnum Textured Black Canvas Micarta Handle
    ASHBM - Anniversary Straight Handle Battle Mistress
    11.15" Blade Length 16.55" Overall Length .325" Blade Thickness 26.6 Ounces
    INFI Blade Steel
    Full Height Flat Ground Ground Muddy Brown Coated Blade with V-Grind Edge & Choil
    Magnum Textured Black Canvas Micarta Handle
    This Anniversary Straight Handle Battle Mistress has been discontinued and taken off the Busse Combat website so can no longer be ordered.
    This is Brand New from the Fall Knob Creek 2015 Show in KY.
    I purchased this knife directly from Busse Combat at the Fall Knob Creek 2015 Show in KY. This has a INFI Steel that is .325" thick with a Muddy Brown Coated Finish! The V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives. I purchased this directly from Busse Combat and it was never used, carried or sharpened!
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop ASHBM .32" Satin Blade with Choil, Full White Camel Bone Handle w/Mosaic Pins & Blue Liners
    Anniversary Straight Handle Battle Mistress - ASHBM
    11" Blade Length 16.5" Overall Length .32" Blade Thickness 27.9 Ounces
    .32" Flat Ground Satin INFI Blade w/Blended Convexed Edge with Choil
    Full White Camel Bone Handle w/Mosaic Pins & Blue Liners
    This knife has a choil and the Nuclear Meltdown on the spine and Butt of the Handle.
    This is from the Spring 2015 Knob Creek Show.
    I purchased this knife directly from Busse Combat at the Spring Knob Creek Knife Show 2015. This has a INFI Steel that is .32" thick with a Satin Finish! The Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is ONLY used by Busse Combat knives. These were never made as a production with this Full White Camel Bone Handle w/Mosaic Pins & Blue Liners and each one is hand custom made by the Busse Custom Shop. Each piece of matching set of Full White Camel Bone Handle is different so each one is "One of a Kind!" I purchased this directly from Busse Combat and it was never used, carried or sharpened!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat ASHBM Limited Edition #724 .32" Satin Blade w/Choil, Textured Magnum Black Paper Micarta Handle
    Anniversary Straight Handle Battle Mistress Limited Edition- ASHBM LE
    11" Blade Length 16.5" Overall Length .32" Blade Thickness 26.3 Ounces
    .32" Flat Ground Satin INFI Blade w/Blended Convexed Edge with Choil
    Textured Magnum Black Paper Micarta Handle
    This is Brand New from the Fall 2015 Knob Creek Show.
    The Anniversary Straight Handle Battle Mistress has been discontinued and taken off the Busse Combat website so can no longer be ordered.
    The Anniversary Straight Handle Battle Mistress was introduced by Jerry Busse in 2013 and has long since been discontinued. Here is one Beautiful Anniversary Straight Handle Battle Mistress Limited Edition #724 with Choil. This has the Beautiful Satin Blade with the Convexed Edge and this one was chosen with the choil. This knife has a lifetime warranty from Busse Combat. I purchased this directly from Busse Combat and it has never been used, sharpened or carried! INFI is a proprietary Steel is used by Busse Combat knives and this model was never avil for sale and probably NEVER AGAIN! This knife will carry a lifetime warranty from the Busse Combat!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Son Of Badger SOB .17" Saber Ground Satin Blade, Full White Bone with Thick Black Buffalo Horn Liner & Red Liners Handle w/Mosaic Pins
    SOB .175" Saber Ground Satin Blade, Full Grey Giraffe Bone Handle Mosaic Pins & Green/Thick Lacewood Liners
    Son of Badger - SOB
    4.65" Blade Length 9.5" Overall Length .17" Blade Thickness 10 Ounces
    Saber Ground Satin Finish INFI Blade Blended Convexed
    This is Brand New from the 2015 Blade Show in Atlanta Ga!
    The Busse Son of Badger was introduced by Jerry Busse in 2014 and has since been discontinued. This was made by Busse Custom made for the 2015 Blade Show in Atlanta Ga! The Blended Convexed Edge is Razor Sharp and SUPER RARE in that all the previous Son of Badger has a blended convexed edge! The Busse Custom Shop really outdid themselves with the Hand Shaped Full White Bone with Thick Black Buffalo Horn Liner & Red Liners Handle w/Mosaic Pins. The color and pattern is Beautiful! You will never see another even close to this! I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Custom Shop Son Of Badger SOB Limited Edition #677 .175" Saber Ground Satin Blade, Textured Black Canvas Micarta Handle
    4.75" Blade Length 9.55" Overall Length .175" Blade Thickness 8.815 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Combat and now now long avil to be ordered. They brought this one to the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .175" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    SOB .18" Competition Finish Drop Trail Point Blade, Black Canvas Fingered Grooved Handle
    4.7" Blade Length 9.5" Overall Length .18" Blade Thickness 8.75 Ounces
    Drop Trail Point Saber Ground Competition Finish INFI Blade w/Blended Convexed Edge.
    This is an Exclusive that only a few were ever made for the Fall Knob Creek 2014 Show!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Custom Shop Son Of Badger SOB .175" Saber Ground Satin Blade, Full Grey Giraffe Bone Handle Mosaic Pins & Green/Thick Lacewood Liners
    Son of Badger - SOB
    4.75" Blade Length 9.65" Overall Length .175" Blade Thickness 9.8 Ounces
    Saber Ground Satin Finish INFI Blade V-Ground Edge
    This is Brand New from the Fall Knob Creek 2015 Show!
    The Busse Son of Badger was introduced by Jerry Busse in 2014 and has since been discontinued. This was made by Busse Custom made for the Fall Knob Creek 2015 Show! The V-Ground Edge is Razor Sharp and SUPER RARE in that all the previous Son of Badger has a blended convexed edge! The Busse Custom Shop really outdid themselves with the Hand Shaped Full Grey Giraffe Bone Handle Mosaic Pins & Green/Thick Lacewood Liners. The color and pattern is INSANE! You will never see another even close to this! I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CS382 ASH1 .22" Convexed Satin, Black G10 G-rexed Giraffe Bone with Mosaic Pins
    This is Brand New from the Knob Creek Spring of 2012.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop ASH1 .225" Saber Ground Satin Blade, Black G10 G-rexed Black/White Mammoth Tooth Handles w/Mosaic Pins
    Anniversary Steel Heart 1 - ASH1
    6.4" Blade Length 12" Overall Length .225" Blade Thickness 18.2 Ounces
    Brand New Saber Ground INFI Blade with a V-Ground Edge.
    INFI Blade Steel, Large Choil
    This is Brand New from the 2015 Fall Knob Creek Show in KY.
    The ASH1 was introduced in 2007 and has long since been discontinued. This knife has beautiful and rare saber ground .225" Satin Blade w/V-Ground Edge. The Anniversary Steel Heart 1 in a Satin Finish with a .225" Saber Ground Satin Blade was NEVER a production model, the .22" Flat Ground blade was made for the Limited Edition, Special Editions and some Custom Shop knives. But this has a INFI Steel that is .225" Satin Blade with a V-Ground Edge! This was hand made by the Busse Custom Shop with a beautiful Black G10 G-rexed Black/White Mammoth Tooth Handles w/Mosaic Pins . This is a Rare "One of a Kind" custom knife that only Busse Combat Custom Shop could make! This is Brand New: never used, carried or sharpened!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat BARFLB .27" Black Blade, Tan Canvas Micarta Handle with a Single Ring
    Busse Assault Ring Fighter Light Brigade- BARFLB
    9.75" Blade Length 7.25" Sharpened Back Edge 15.75" Overall Length .27" Blade Thickness 15.61
    This one is from the Spring Knob Creek 2015 Show!
    This is a super rare blade as this is one of two I have ever seen before! This starts as a Argonne Assault Light Brigade but because of the location of where you are, you may not be allowed to own a knife with full knuckle guards. Back in 2004, Jerry Busse introduced the Busse Assault Ring Fighter. They were only available at shows and Ganzas and not many were ever made. Fast forward to 2014, Jerry took the Argonne Assault Light Brigade and took off the guard for three of the knuckle guards. This particular knife is from the Spring Knob Creek 2015 show. This blade design of the original AA but have added many new features such as the sharpened back edge, Busse armored tip, strengthened shallow hollow ground bevel, machine hollowed tang with internal web for vibration dampening and strength, and fully rounded outer and inner edges for user comfort. Made from .27"" thick INFI and possessing all of the above features, and the one ring will help keep this knife in your hand and not slipping out when is use. INFI is a proprietary Steel is used ONLY by Busse Combat knives. This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Tank Buster Limited Edition #111 .23" Saber Ground Satin Blade, Tigerhide Handles w/BuyBrown Black Kydex Sheath
    6.25" Blade 11.85" Overall .23" Satin Thick 15.665 Ounces
    The Tank Buster was introduced in 2009 and have since than been discontinued. This has a INFI Steel that is .23" thick with a Saber ground Satin Blade! The Saber Ground Blade with V-Ground Edge is Razor Sharp! This is pre-owned and sheathed and although never used, carried or sharpened, it does show scratches on the blade from the kydex sheath. Because of the scratches, I am listing this knife as used and this is being sold as is with no returns so please look at the pictures carefully and ask all questions before purchase.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Team Gemini .25" Saber Ground BIG Satin , Magnum Textured Black Canvas Micarta Handles
    7.8" Blade Length 13.25" Overall Length .25" Blade Thickness 20.2 Ounces
    INFI Blade Steel
    Saber Ground Satin Blade with a V-Ground Edge
    B.I.G. - Busse Industrial Grade Satin Finish
    Magnum Textured Black Canvas Micarta Handles
    This was a very limited run offered for a very short time. The B.I.G. - Busse Industrial Grade Satin Finish is a cross between the Competition Finish and a Hand Satin Finish. So there are very light machining marks or imperfection but much better than the Competition Finish. This Model has been discontinued, so get this before the price Skyrockets!
    This was a very few of these exist that were made by Busse Combat. Because it's not a hand satin finish, it cost much less but at the same time, gives you a great usable affordable satin finish. I purchased this knife directly from Busse Combat so in Brand New Condition. This has a INFI Steel that is .25" Thick! This uses the same Satin Team Gemini blank that was only avil at Blade 2014! The Saber Ground Satin Blade with a V-Ground Edge is Razor Sharp and was never offered on the Satin Team Gemini! This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Kill Devil Sniper Hawk Tomahawk .185" Red & Black Cerakoted Blade, Textured Black G10 Handle (1 OF 6)
    Kill Devil Sniper Hawk - KDSH
    Cutting edge length: 3 1/8"
    Head width: 7"
    Spike length: 3 1/8"
    Thickness: 3/16"
    Overall length 15 1/2"
    Steel: SR101 58-60RC, steel
    Textured Black G10 Handle
    Weight 21.135 Ounces
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only 6 made so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore.
    The Kill Devil Sniper Hawk was first first sent overseas with the military and tested to make sure it would last and did what it was intended to. This came back with very positive feedback exceeding all expectations. When this was avil for order, back than it was ONLY available with a coated blade. This one is Brand New, never used, carried or sharpened from the 2015 Blade Show in Atlanta Ga! This particular Tomahawk was purchased by me directly from Busse Combat at the Blade 2015 Show. There were only 6 of these made in this Red & Black Cerakoted combination. The Cerakote cover only the SR101 of the Tomahawk and not the Black G10 Handles. The Cerakote coats and protects the steel. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse/Swamp Rat Knife Works has offered this coating on their knives and may never do it again, you never know! This knife will carry a lifetime warranty from Swamp Rat Knife Works which is the sister company of Busse Combat! This one is new and a RARE Super Find as only 6 were ever made for this color/model! This is Brand New, Never Used, Carried or Sharpened!
    Sold
     
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    SYKCO Scrap Yard Knife Company 311 Black Digicam Cerakoted .195" Saber Ground Blade, Black Resiprene C Handle (1 of 10)
    3.5" Blade 7.9" Overall Length .195" Blade Thickness 4.9 Ounces
    SR101 Blade Steel
    Black Digicam Cerakoted Coated Saber Ground .195" Blade with V-Ground Edge
    Black Resiprene C Handle
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only Ten made so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore!
    The Scrap Yard Knife Company 311 is a Super Little knife for a Great Price. This is made by Scrap Yard Knife Company which is the sister company of the Busse Combat. This knife was made for hard use and has a nice Resiprene C Handle which has a great non slip softer grip so you don't lose the grip when this is in use. The Cerakote coats and protects the exterior of the blade. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if it will be done again! The Blade steel is SR101. This knife will carry a lifetime warranty from Scrap Yard Knife Company! This one is new and a RARE Super Find Because they only made 10 in this color combination. Brand New, Never Used, Carried or Sharpened!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Short American Butaniku Sword .255" Red/Black Cerakoted, Canvas Micarta Handle (1 of 5)
    23.75" Blade Length 36" Overall Length .255" Blade Thickness
    Flat Ground with Fuller, and V-Ground Edge
    INFI Blade Steel
    Textured Canvas Micarta Handle
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only 5 made so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore.
    This Short American Butaniku Sword is a beautiful knife made by Busse Combat Custom Shop. This model was made because some people thought that the full size Butaniku was too long and heavy. And than the Busse Combat Custom Shop created this. I think many would say that the weight and balance of this sword is much better now. The problem is that this was never a production Sword, only a few of these were shows and ganzas. This has a V-Ground Edge. This particular knife was purchased by me directly from Busse Combat at the Blade 2015 Show. There were only 5 of these made in this Red & Black Cerakoted combination. The Cerakote cover not only the blade but the Textured Canvas Micarta Handles and protects it. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, you never know! INFI is a proprietary Steel is used ONLY by Busse Combat knives and is Legendary! This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find as only 5 were ever made for this color/model! This is Brand New: Never Used, Carried or Sharpened!
    Sold
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    Pancake Style Black MashedCat Kydex Sheath for the Busse Combat SAR4
    Eric from MashedCat Kydex made this strong druible Kydex sheath to hold a Busse Combat SAR4 for carry and use.
    Sold
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Porky Parkway .415" Deep Hollow Ground Satin, Blue/Black G10 Handle with Black Chuddybear Leather Sheath for the Porky Parkway .41"
    4.15" Blade 8.75" Overall .415" Thick 12.44 Ounces
    This is the second thickest Meaner Street ever made by Busse. This one was custom ordered by a customer and the other one is slightly thicker. This was hand ground by Jerry Busse himself and comes in at .415" on my mic. It was sent to Chuddybear where it had a custom black leather sheath made. I think this might be the heaviest Meaner though. Here is the original thread by the customer with the:
    http://www.bladeforums.com/forums/showthread.php/636436
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CS447 Busse Combat Custom Shop SAR3 Variant .16" Flat Ground Satin Blade, Full Giraffe Bone Handle w/Mosaic Pins & Black Liners
    Search And Rescue 3 - SAR3
    3.2" Blade Length 7.3" Overall Length .16" Blade Thickness 4.8 Ounces
    Nuclear Meltdown Treatment on the Spine and Handle
    INFI Blade Steel
    Flat Ground Blade with a Satin Finish & V-Ground Edge
    This is Brand New directly from the 2011 Blade in Atlanta Ga.
    These Search And Rescue 3 are sold out everywhere because they have being discontinued! The Search And Rescue 3 was introduced in 2010 and have since than been discontinued. The SAR3 were all available only though the Busse Company Store when it was open and only in certain color combination. You could only order what was available at the time. This one was special and made by the Busse Combat Custom Shop with a hand shaped Full Giraffe Bone Handle w/Mosaic Pins & Black Liners! This has a custom Re-Shaped Blade that was Flat Ground with a V-Ground edge which is very different from the full height convexed Blade that most SAR3 came with. This also has a Re-Shaped Handle to fit the hand better with a Skull Crusher! This may look nice but it feels even better in your hands and this is ULTRA RARE as this is "One of a Kind!" You could not order this knife like this from Busse and needed to be the first one to grab this at the show. This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop SAR3 .16" Convexed Satin Blade, Black G10 G-rexed Giraffe Bone Handle w/Solid Brass Bolts
    Search And Rescue 3 - SAR3
    3.25" Blade Length 7.35" Overall Length .16" Blade Thickness 6 Ounces
    Nuclear Meltdown Treatment on the Spine and Handle
    INFI Blade Steel
    Full Height Convexed Satin Finish Blade/Edge
    The Search And Rescue 3 was introduced by Busse Combat in 2010 and has long been discontinued. These Search And Rescue 3 are sold out everywhere because they have being discontinued for a good while now! The SAR3 were all available only though the Busse Company Store when it was open and only in certain color combination. You could only order whatever color combination was available at the time. This one however was special and made by the Busse Combat Custom Shop with a hand shaped Black G10 G-rexed Giraffe Bone Handle and finished off with Solid Brass Bolts! This has a Full Height Convexed Satin Finish Blade/Edge with a custom hand made handle. This may look nice but it feels even better in your hands and this is ULTRA RARE as this is "One of a Kind!" You could not order this knife like this from Busse. The Full Height Convexed Satin Finish Blade/Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Basic 8 CG .24" Black Flat Ground Blade, Black Resiprene C Handle
    Basic 8 CG - Basic 8 Combat Grade8.15" Blade Length 13.15" Overall Length .23" Blade Thickness 12.925 Ounces
    Flat Ground Black Blade with a V-Ground Edge with Choil
    Black Resiprene C Handle
    Brand New with a very sharp V-Ground Edge.
    The Basic 8 Limited Edition was just introduced and already has been discontinued. This is the same knife but it's coated so a tad bit thicker, and because of finishing the INFI blade to a satin finish, they coated the blade which in Busse terms is called Combat Grade and thus more affordable for those that would like to use it instead of collecting it. The Basic 8 LE in a thick .23" thick was only available in a Ganza and are already all sold out, this was only avil at the Blade 2015 show and sold out also!
    Sold
     
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Bushwacker Limited Edition #20 .22" Saber Ground Satin Blade, Black Paper Handle
    10.5" Blade Length 16.4" Overall Length .22" Blade Thickness 23.1 ounces
    Saber Ground Satin Blade with a V-Ground Edge
    Textured Magnum Black Paper Micarta Handle
    The Bushwacker Limited Edition Knife was introduced by Busse at the 2009 and has long been since discontinued. The Limited Edition didn't just have a satin blade over the Combat Grade, it was had a thicker .22" Satin Saber Ground instead of the Flat Ground .19" Coated Blade! All the handles on the Limited Edition were textured Black Paper Handle. This knife will carry a lifetime warranty from Busse Combat!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop NMSFNO .25" Convexed Satin Blade, Magnum Textured Black Paper Micarta Handle
    NMSFNO Nuclear Meltdown Special Forces Natural Outlaw
    8" Blade 14" Overall .25" Thick 21.5 oz.
    Full Height Convexed Satin Blade/Edge
    INFI Blade Steel
    Nuclear Meltdown Treatment on the Spine and Edges
    The NMSFNO was introduced in 2008 and have since than been discontinued. I purchased this knife from a collector who made the mistake of buying a kydex sheath and put the knife in and took out a few times which cause a few superficial scratches that can only seen from certain light at certain angles. This has a INFI Steel that is .25" thick with a Full Height Convexed Blade! The Convexed Edge is Razor Sharp! I am selling this as pre-owned because it shows light use scratches probably from the kydex sheath. This will include a Black Kydex sheath made by David Brown for this exact knife. This knife has a lifetime warranty from Busse Combat. This knife will carry a lifetime warranty from Busse Combat! Because this is used, this is being sold as is so please look over the pictures carefully and ask all questions before you purchase.
    Sold
     
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    KC172 Busse Combat HG55 In Competition Finish from 2012 Knob Creek Show, Black G10
    The Busse Combat HG55 was introduced in 2009. This is made with INFI steel.
    5.5" Blade 10.75" Overall .25" Thick with CBT (Corrugated Bevel Technology)
    This exact knife was made for a Knob Creek Gun Show in spring of 2012. None of these knives ever made it to the gun show itself, all of them were sold on Thursday night. As many of you know, Jerry Busse announced that they will no longer be doing the Competition Finish as an option until further notice! There was a total of three different models of these Competition Finish HG55 and this is one of the three with more of the CBT.
    The Competition Finish is NOT a satin finish and is just can uncoated blade, stamped with the Busse logo. There may be imperfection in the finish which may consist of dimples or machining marks.
    This is Brand New purchased by me directly from Busse Combat straight from the show.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Hinderer XM18 3" Production Wharncliffe Flipper, S35VN Stonewashed Blade/Frame Lock, Black G10
    3" Production Wharncliffe Flipper
    Stonewashed Lock Side
    Stonewashed Marked S35VN Blade
    Rick Hinderer Logo
    Hinderer Bronze Anodized Titanium Pivot Screw
    New Generation, the blade stop pin has been relocated next to the pivot.
    This is Brand New and will come with Hinderer Box/Baggie, and Limited Edition Blade Dog Tag. Smooth opening action, Early lockup, and centered blade. I won this at the Blade 2014.
    Sold
     
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Shop Swamp Rat RMD .17" Saber Ground Satin INFI Blade with Textured Tan G10 Handle
    5.25" Blade Length 10.25" Overall Length .17" Blade Thickness 10.32 Ounces
    INFI Blade Steel
    Saber Ground Satin Blade w/Blended Convexed Edge
    This was a very few of these made by hand by the Custom Shop and I purchased this knife directly from the Swamp Rat Knife Company at the Blade 2014. This has a INFI Steel that is .17" thick with a satin Finish! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives and was never avil for this model Swamp Rat Ratmandu before. I purchased this directly from Busse Combat!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    NJ102 Busse Combat Custom Shop Boss Jack .22" Convexed Satin Blade, Black G10 G-rexed Brown/Green Curly Oak Wood Handle w/No Choil & Mosaic Pins
    6.3" Blade Length 11.3" Overall Length .22" Blade Thickness 11.5 Ounces
    Full Height Convexed Satin Blade with Nuclear Meltdown Treatment on the Spine and Edges
    This is a Brand New knife that I purchased directly from Busse Combat at the East Coast Custom Knife Show in NJ on 3/4/2011.
    In 2010 Jerry Busse introduced the Boss Jack. These were avil for order for a bit and than discontinued. At that time, the .22" thick Boss Jacks were only Prototype so this was using one of those blanks and has the full INFI Steel that is .22" thick with Convexed Blade which is Razor Sharp! These were never made as a production with these Hand Shaped Black G10 G-rexed Brown/Green Curly Oak Wood Handle w/No Choil & Mosaic Pins and neither is the .22" Convexed Blade for any of the Boss Jack so each one is hand custom made by the Busse Custom Shop. Each piece of matched wood is different so each one is "One of a Kind"! INFI is a proprietary Steel is used ONLY by Busse Combat knives. This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This knife was purchased directly by me from Busse Combat and than spent it's life in a safe.
    Sold
     
    Last edited by a moderator: Jan 6, 2016
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Game Warden .27" Satin Blade, Brown/Black G10, Convexed Edge with Black Kydex Sheath w/TecLok lightly buffed with convexed edge
    3.1" Blade Length 7" Overall Length .27" Thick 7.95 Ounces
    .27" Thick INFI Blade Steel
    Blended Convexed Edge.
    This is from a short run from about 2007!
    This was a production know Busse Combat sold through the company store about 2007! This started out as a Flat Ground with a V-Ground Edge but it seems the privous owned did a bit of polishing and sharpening and had a custom kydex sheath made for this knife! This is being sold as used, carried and sharpened and shows on the blade.
    Sold
     
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CS303 Busse Combat Custom Shop SAR3 .16" Hollow Ground Satin Blade, Full Natural Color Fossil Tooth w/Thick Black Canvas Micarta & Mosaic Pins
    Search And Rescue 3 - SAR3
    3.2" Blade Length 7.35" Overall Length .16" Blade Thickness 5.4 Ounces
    Nuclear Meltdown Treatment on the Spine and Handle
    INFI Blade Steel
    Hand Hollow Ground Blade with a Satin Finish
    This was purchased by me directly from the Busse Combat at the Spring Knob Creek Show 2011.
    These Search And Rescue 3 are sold out everywhere because they have being discontinued!
    The Search And Rescue 3 was introduced in 2010 and have since than been discontinued. The SAR3 were all available only though the Busse Company Store when it was open and only in certain color combination. You could only order what was available at the time. This one was special and made by the Busse Combat Custom Shop with a hand shaped Full Natural Color Fossil Tooth w/Thick Black Canvas Micarta & Mosaic Pins! This may look nice but it feels even better in your hands and this is ULTRA RARE as I know there are only two SAR3 with a Hollow Ground blade and this one of them! You could not order this knife like this from Busse and needed to be the first one to grab this at the show. This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Fat SFNO .26" Saber Ground Satin Blade, Blue/Black G10 G-rexed Blue Coral Handle w/Mosaic Pins
    Special Forces Natural Outlaw - SFNO
    7" Blade Length 12.9" Overall Length .26" Blade Thickness 22.9 Ounces
    .27" Saber Ground Satin INFI Blade with a V-Ground Edge with Large Choil
    Full Hand Smoothed Red/Black G10 G-rexed Coral Handle w/Mosaic Pins
    This was Brand New from the 2015 Fall Knob Creek Show in KY and this is a "ONE of a KIND!"
    The SFNO (Special Forces Natural Outlaw) was introduced by Jerry Busse in 2004 and has long been since discontinued. This has the thickest Satin INFI blade I have ever seen on a SFNO! The Busse Combat Custom Shop really did a beautiful job on this custom Hand Shaped Red/Black G10 G-rexed Coral Handle w/Mosaic Pins. The Red/Black G10 matches perfectly with the color of the Black and Red in the Coral Handle! There was a rumor before that there existed the Fat SFNO that was a coated blade at .27" Thick and your normal SFNO either coated or satin were all .22" thick so this one is special because it's thinker than your normal standard SFNO! This V-Ground Edge is Razor Sharp. This is Brand New: never used, carried or sharpened!
    Sold
     
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    SYKCO Scrap Yard Knife Company 311 Black .19" Blade, Black Resiprene C Handle
    3.5" Blade 7.85" Overall Length .19" Blade Thickness 5 Ounces
    SR101 Blade Steel
    Black Coated Saber Ground .19" Blade with V-Ground Edge
    Black Resiprene C Handle
    The Scrap Yard Knife Company 311 is a Super Little knife for a Great Price. This is made by Scrap Yard Knife Company which is the sister company of the Busse Combat. This knife was made for hard use and has a nice Resiprene C Handle which has a great non slip softer grip so you don't lose the grip when this is in use. This knife will carry a lifetime warranty from Scrap Yard Knife Company! This one is was purchased by me directly from Busse Combat at the Blade 2015 Show. Brand New, Never Used, Carried or Sharpened!
    Sold
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Anniversary Mean Street .165" Convexed Satin Blade, Textured Red Tequila G10 Handle
    3.65" Blade Length 8.25" Overall Length .165" Blade Thickness 5.2 Ounces
    .165" Blade Thickness Convexed Blade/Edge
    INFI Blade Steel
    Textured Red Tequila G10 Handle
    This is from the Fall Knob Creek 2015 Show.
    This Model is SOLD OUT on the Busse Combat and has been discontinued!
    The Anniversary Mean Street was introduced by Jerry Busse in 2013 and has just been discontinued. This is very well loved because of the size makes this a great Every Day Carry Knife! This has a Convexed Blade/Edge and this one weights 5.2 ounces. This particular knife was purchased by me directly from Busse Combat at the Fall Knob Creek 2015 Show. INFI is a proprietary Steel is used ONLY by Busse Combat knives. This is Brand New, never used, carried or sharpened.
    Sold
     
Thread Status:
Not open for further replies.

Share This Page