1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 8th Thread

Liu Kang May 31, 2015

Thread Status:
Not open for further replies.
  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Meaner Street 2007 Special Edition .17" Double Cut Blade, Green/Black G10
    4.125" Blade Length 8.75" Overall Length .17" Blade Thickness 6.345 Ounces
    .17" Flat Ground Flat Ground Double Cut with V-Grind Edge
    INFI Blade Steel
    This is from the the Blade 2007 show and the BloodBathAganzaaa!
    This was not a production knife and was nicknamed "Tweener" because it was between a Meaner Street at .22" thick and the Leaner Meaner which was .155" thick. These Tweener Meaner were only avil at some of the knife shows/Ganza and only a handful were made. This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    Scrap Yard Knife Company 311 .20" Bronze Coated Blade, Black Recs Handle
    Steel: SR101
    Handle: Resiprene C
    Overall Length: 7.85”
    Blade Length: 3.5”
    Blade Thickness: 0.20”
    Weight: 4.941 Ounces
    Blade Finish: Bronze Coated
    Exclusive Blade 2014 Edition with Garth's Tattoo logo on the right side of the blade.
    There was only very few of these made with this color for the Blade 2014 Show. The Bronze coating with Garth's Tattoo will never be done again, only a few made so get this while you can! This is made by the Scrap Yard Knife Company which is the sister company to Busse Combat and uses the SR101 steel. This has a saber Ground Blade with a Sharp V-Ground Edge! This knife will also carry a Lifetime Warranty! This one is Brand New and has spend it's life in a safe. Never used, carried or sharpened!
    Sold
     
    Last edited by a moderator: May 31, 2015
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    Busse Combat Meaner Street .195" Saber Ground Black Blade, Red G10 Handle
    4.125" Blade Length 8.75" Overall Length .195" Blade Thickness
    .195" Saber Ground Black Coated with V-Grind Edge Blade
    INFI Blade Steel
    Textured Red G10 Handle
    This is one of a short run of the Meaner Street done with V-Ground Edge on a Saber Grind. This is a production knife and was nicknamed "Tweener" because it was between a Meaner Street at .22" thick and the Leaner Meaner which was .155" thick. These Tweener Meaner were only avil at some of the knife shows/Ganza and only a handful were made. This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives and this model was never avil for sale and probably NEVER AGAIN! This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Tank Buster .255" Grey Saber Ground Blade, Standard Texture Red G10 Handle, No Choil, Skullcrusher
    6.25" Blade 11.85" Overall .255" Satin Thick 15.960 Ounces
    This is from the Spring Knob Creek Show of 2015!
    INFI Blade Steel
    No Choil which means a longer cutting edge.
    Skullcrusher for additional use in self defense or to break glass...
    The Tank Buster was introduced in 2009 and have since than been discontinued. This has a INFI Steel that is .255" thick with a Saber ground Tank Grey Blade! The Saber Ground Blade with V-Ground Edge is Razor Sharp! This is Brand New, never sheathed, used, carried or sharpened. I purchased this directly from Busse Combat.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Son of Badger .185" Saber Ground Competition Finish Blade, Magnum SOS Orange G10 Handle
    4.75" Blade Length 9.5" Overall Length
    Saber Ground Competition Finish INFI Blade w/Blended Convexed Edge
    This was a very Limited Production Run Busse Combat made for the Blade 2014 show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. This is the last one I have in this color!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    SOB .18" Competition Finish Drop Trail Point Blade, Brown/Black G10 Handle
    4.7" Blade Length 9.5" Overall Length .18" Blade Thickness
    Drop Trail Point Saber Ground Competition Finish INFI Blade w/Blended Convexed Edge.
    This is from the Fall Knob Creek 2014 Show.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    SOB .18" Competition Finish Drop Trail Point Blade, Black Canvas Fingered Grooved Handle
    4.7" Blade Length 9.5" Overall Length .18" Blade Thickness 8.75 Ounces
    Drop Trail Point Saber Ground Competition Finish INFI Blade w/Blended Convexed Edge.
    This is an Exclusive that only a few were ever made for the Fall Knob Creek 2014 Show!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    KC370 Son Of Badger .165" Doublecut Blade, Magnum Black Canvas Micarta Handle Proto
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    SOB .18" Competition Finish Drop Trail Point Blade, Red/Black G10 Handle
    4.7" Blade Length 9.5" Overall Length
    Drop Trail Point Saber Ground Competition Finish INFI Blade w/Blended Convexed Edge
    This is from the Fall Knob Creek 2014 Show.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Nuclear SOB Variant .17" Saber Ground Satin Blade w/Sharpened Spine, Textured Orange/Black G10 Handle
    4.75" Blade Length 9.55" Overall Length .17" Blade Thickness 9.39 Ounces
    Saber Ground Re-Curved Satin Finish INFI Blade w/Blended Convexed Edge and a 3.25" Sharpened Top Edge
    This was made by Busse Custom made for the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    Sold


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop AK47 .18" Convexed Satin with Textured Tigerhide Canvas Micarta Handle
    18.3" Blade 28.8" Overall Length .18" Blade Thickness
    The Busse Combat AK47 was first introduced by Jerry Busse in 2005 and back than it was with a coated blade. There were very few made with this Convexed Satin Blade for the shows and Ganza that Busse did. This one is Brand New, never used, carried or sharpened.
    Sold
     
    Last edited by a moderator: Jun 1, 2015
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CS508 Hog Integral Steak, Hollow Ground Satin Blade with Black G10
    Hog Integral Steak - HIS
    4" Blade Length 8.8" Overall Length .11" Blade Thickness 3.28 Ounces
    .18" Full Height Hand Ground Deep Hollow Grind in Satin
    INFI Blade Steel
    Black G10 Insert & Handle
    This is from the 2012 Blade Show in Atlanta GA.
    This Hog Integral Steak is a beautiful knife Hand Ground by Busse Combat Custom Shop. This is a super low production made by the Busse Custom Shop that was hand ground with a deep hollow grind and only a handful was avil at the 2012 Blade Show. This particular knife was purchased by me directly from Busse Combat at that Blade Show.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CS446 Urban Grudge Variant .25" Convexed Satin, G-rexed Giraffe Bone Handle
    4.5" Blade 9.6" Overall
    This is a one of a kind with a shorter blade the even the Urban Grudge Customs Shops because of the shorter blade. You can see the size difference in the last picture.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Sarsquatch with Uparmored Camo and polished Convexed Edge
    Busse Combat Sarquatch with Up-armored Sniper Snake Skin Camouflage
    7.15" Blade Length 12.65" Overall Length .187" Thick
    INFI Blade Steel
    Flat Ground Satin Blade with a Convexed Edge
    Magnum Textured Handle
    Up-Armored Sniper Snake Skin Coating on Blade and Handle
    The Busse Sarquatch was introduced in 2008 and only avil with a coated blade and a competition finish! The previous owner purchased this knife and had it sent to Up-Armored where the Sniper Snake Skin Coating was applied on both the blade and handle.
    This has a INFI Steel that is .18" Thick with a Convexed Edge! The Convexed Edge is Razor Sharp! This is in new condition as it was never used, carried or sharpened after the Up-Armored Sniper Snake Skin Coating was applied.
    Sold


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat NMSFNO .27" Black Blade, Standard Textured Red G10 Handle
    NMSFNO Nuclear Meltdown Special Forces Natural Outlaw
    8" Blade 14" Overall .27" Thick 21.5 oz.
    The NMSFNO was introduced in 2008 and have since than been discontinued. I purchased this knife directly from Busse Combat. This has a INFI Steel that is .27" thick with a Black Coated Blade! The Convexed Ground Blade with V-grind Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Ratweiler Limited Edition #17 .17" Saber SR101 Ground Satin Blade, Black Canvas Micarta Handle
    Blade Length: 7-1/2”
    Blade Width: 1.75”
    Blade Thickness: .17”
    Overall Length: 13-1/4”
    Grind: Saber
    Steel: SR101 58-60Rc
    Here is a custom ordered Safe Queen! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. This has a SR101 Steel that is .17" thick!
    Sold

     
    Last edited by a moderator: Jun 2, 2015
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Coyle Whiskey II
    4.25" Blade Length 9.65 Overall Length .17" Blade Thickness 7.4 Ounces.
    This one was won in the knife lottery at the Blade 2015 Show. Beautiful Flipping action with a strong detent. Centered blade with early solid lockup!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Farid Mehr K2 Prototype
    3.75" Blade Length 8.4" Overall .195" Blade Thickness 5.575 Ounces
    D3 Tool Steel Blade 58RC
    Zero Ground Edge
    Titanium Spacer
    Detent ball is silicon nitrite ceramic ball
    Anodized Dark Bronze Titanium Handle
    This is a knife I personally bought from Farid Mehr at the Blade 2015 Show. This was his personal working prototype and was the ONLY one with a Zero Edge. This is the one he carried around to show everyone at the show his new knife that is going to be produced. Smooth Opening action, centered blade with no blade play in any direction.
    Sold
     
    Last edited by a moderator: Jun 8, 2015
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Sniper Bladeworks Experimental Modified Tanto Flipper
    3.75" Blade 8.85" Overall .20 Blade thickness 7.23 Ounces
    Two-Toned Blade Finish
    This Custom Sniper Bladeworks Experimental Flipper is about a custom a knife you will find. This whopper of a knife was finished just before heading to the Gathering G3 convention in Vegas and was literally purchased from Sam;s pocket. This is a modified Tanto style flipper that's been given a two-tone finish with the bottom being bead blasted to match the titanium lockside. The Sniper logo appears on the front of the blade and EXP 001 is on the back of the backside. The front scale is textured green G10 screwed to a titanium liner. The back of the frame is bead blasted titanium from the burly framelock. a natural colored G10 backspacer and titanium tip-up Tit clip comes on this one of a kind package. This first edition experimental custom is brand new direct from Lance & Co. at Sniper Bladeworks.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    SAR8 Fighter, .21" Convexed Satin Blade, Full Spaltmed Maple Wood Handle Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Team Gemini Light Brigade TGLB .285" Black Blade w/Fuller, Magnum Black Canvas Handle
    TGLB - Team Gemini Light Brigade
    7.75" Blade 13.15" .285" Thick w/Fuller 15.78 Ounces
    Shallow Hollow Ground Blade with V-Ground Edge, Black INFI Blade
    This was the Famous knife used on TV series "The Walking Dead!" The Blended V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat at the Spring Knob Creek Show 2015! This has a INFI Steel that is .285" thick with a Black Blade!
    Sold
     
    Last edited by a moderator: Jun 9, 2015
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Beefmandu .26" Sage Hollow Ground SR101 Blade, Tan Canvas Micarta Handles
    6" Blade Length 11.1" Overall Length .26" Blade Thick 13.09 Ounces
    .26 Deep Hollow Saber Ground Sage Coated INFI Blade with V-Grind Edge
    Textured Tan Canvas Micarta Handles
    SR101 Blade Steel
    This is an Exclusive from the Blade 2014 Show.
    This is a very special model that was only sold at one show and couldn't be purchased anywhere else. This is based off the Ratmandu only it is much thicker and .75" longer and has a Deep Hollow Saber Ground with a V-Grind Edge. There were not many made so if you like it, get it before it's gone! The V-Grind Edge is Razor Sharp! This was a very special knife that was only made for that one show and never again! This is Brand New, never used, carried or sharpened.
    Sold
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Gladius .31" Sage Blade, Hand Smoothed Olive Green G10 Handle
    15.15" Blade 23.20" Overall .31" Blade Thickness 2 Pounds 4.6 Ounces Estimated Weight
    Double Edged V-grind
    Sage Coated Convexed Combat Grade Blade with Fuller
    This was a very Limited Production Run Busse by the Combat Custom Shop! This was introduced by Jerry Busse in the summer of 2010 and has long since been discontinued! The Double Edged V-grind is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat at the Spring Knob Creek 2015 Show! This has a INFI Steel that is .31" thick! This has never been used, carried or sharpened!
    Sold
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Ernest Emerson Custom Specwar Roadhouse from Blade 2015
    Blade Length: 3.75″
    Overall Length: 8.9"
    Blade Thickness: .125"
    Hardness 57-59 RC
    Blade Steel: CPM 154-CMWeight: 6.185 ounces
    This is Brand New with Factory Box and Emerson paperwork. Solid early Lockup with a centered blade! Straight from the Blade 2015 Lottery in Atlanta Ga. This has a very aggressive Chisel Ground Tanto Blade and has the Older Specwar Knives logo! This was never used, carried or sharpened. I picked this out myself so nobody else has owned this.
    Sold
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Ernest Emerson Custom Big Bulldog Prototype from Blade 2015
    Blade Length: 3.65″
    Overall Length: 8.9"
    Blade Thickness: .125"
    Hardness 57-59 RC
    Blade Steel: CPM 154-CMWeight: 6.49 ounces
    This is Brand New with Factory Box and Emerson paperwork. Solid early Lockup with a centered blade! Straight from the Blade 2015 Lottery in Atlanta Ga. Ernest Emerson stated this was the very first one and is a Prototype even though this one is NOT marked "Prototype" on the blade. He also stated this in the videos prior to the Blade 2015 show. This has a very aggressive Chisel Tanto Blade! This was never used, carried or sharpened. I picked this out myself so nobody else has owned this.
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Rick Hinderer Custom XM18 Harpoon 4th Gen 3.5" Flipper Working Finish Blade, Blue Anodized Stonewashed Full Ti Handles
    3.5" Hollow Hand Ground Harpoon Working Finish Flipper
    Yellow G10 Scale
    Working Finish Un-Marked Blade Steel
    Blue Anodized Working Finish Titanium Lock Side, Liner, Pocket Clip, Filler Tab, Thumb Stud, Pivot Screw, Stop-Lock, Backspacer and Backspacer Screws.
    4th Gen with the Blade Stop next to the Pivot.
    Rick Hinderer Custom Logo marked on the blade.
    Smooth opening action, Solid lockup with a centered blade. This has a nice strong detent so the blade with fly out when the blade is engaged. This will come with a Hinderer Box autographed by Rick Hinderer at the Blade 2015 which is where this knife is from, Zip lock baggie and tactical peanuts. Dead Mint, Unused/Un-carried & Dead Mint Condition.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    SAR3, Doublecut with Black Micarta Canvas
    SAR3, .16" Doublecut Blade with Black Micarta Canvas
    Search & Rescue 3.3" Blade 7.4" Overall
    Nuclear Meltdown Treatment on the Spine and Handle
    This was purchased by me directly from the Busse Company Store in November of 2010. The SAR3 was introduced in 2010 and have since than been discontinued. This has a 3.3" INFI Steel that is about .16" thick. The V-grind Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    Team Gemin M .26" Aged Bronze Cerakoted Blade, Magnum Canvas Micarta Handle (1 of 7)
    Sold

    [​IMG]
    [​IMG]
    Team Gemin M .26" Digital Camo Cerakoted Blade, Magnum Canvas Micarta Handle (1 of 5)
    Sold

    [​IMG]
    [​IMG]
    Team Gemin M .26" Tan American Flag Cerakoted Blade, Magnum Canvas Micarta Handle (1 of 4)
    Sold

    [​IMG]
    [​IMG]
    Team Gemin M .26" Red & Black Cerakoted Blade, Magnum Canvas Micarta Handle (1 of 5)
    Sold
     
    Last edited by a moderator: Jun 16, 2015
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    FOX TECNOREEF II G10 HANDLE DLC COATING BLADE 468G10/2
    4.35" Blade Length, 9.3" Overall .16" Blade Thickness 7.960 Ounces
    Black DLC Coated N690CO Cobalt Vanadium Stainless Steel
    Black G10 Handle
    Diving knife Tecno Reef 2 FOX Italy, Professional scuba divers and diving knives with blade of N690Co Cobalt Vanadium stainless steel of high quality with surface treatment in PVDGM Gun Metal® a coating of thin films under vacuum through the physical vapor deposition (Physical Vapor Deposition) very resistant to abrasion and waterproof - HRC 56/58 - Blade lenght 4.3" - Thickness 0.16" - Black G10 handle with rouge texture for a better grip - Overall length 9.3" ​​- Equipped with KYDEX® sheath with clip that can be clipped to tactical belts or military backpacks with MOLLE system - A FOX diving knife really exceptional with quality materials and an excellent Italian design, superior quality in all the components and also in the finishes
    This knife is New in Box with factory edge. This will include the black kydex sheath.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Vex .195" Red & Black Cerakoted Blade, Textured Canvas Micarta Handle (1 OF 5)
    4.4" Blade Length 8.4" Overall Length .195" Thick 7.125 Ounces
    Flat Ground Red & Black Cerakoted D2 Blade with V-Ground Edge.
    Textured Canvas Micarta Handle
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only Five made and only this color combination so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore!
    The Swamp Rat Vex in Red & Black Cerakoted across the knife with a .195" Blade thickness! The Cerakote coats not only the blade but the Magnum Canvas Micarta Handles and protects it. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! This knife will carry a lifetime warranty from Swamp Rat Knives Works! This one is new and a RARE Super Find Because they only made 5 in this color combination. Brand New, Never Used, Carried or Sharpened!
    Sold

    Elmax Lil Smokey .10" B.I.G. Satin Blade, Textured Red Tequila G10 Handle (1 of 16)
    Sold
     
    Last edited by a moderator: Jun 18, 2015
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Basic 8 CG .24" Flat Ground Tanker Grey Blade, Black Resiprene C Handle
    Basic 8 CG - Basic 8 Combat Grade
    8.15" Blade Length 13.15" Overall Length .24" Blade Thickness 13.175 Ounces
    Flat Ground Tanker Grey Blade with a V-Ground Edge with Choil
    Black Resiprene C Handle
    Brand New with a very sharp V-Ground Edge.
    The Basic 8 Limited Edition was just introduced and already has been discontinued. This is the same knife but it's coated so a tad bit thicker, and because of finishing the INFI blade to a satin finish, they coated the blade which in Busse terms is called Combat Grade and thus more affordable for those that would like to use it instead of collecting it. The Basic 8 LE in a thick .23" thick was only available in a Ganza and are already all sold out, this was only avil at the Blade 2015 show and sold out also!
    Sold
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Hinderer XM18 3" Slicer, Grey Scale, Anodized Bronze Pivot Screw, Stonewashed
    3" Production Slicer Flipper
    Stonewashed Lock Side
    Stonewashed Marked S35VN Blade
    Rick Hinderer Logo
    Hinderer Bronze Anodized Titanium Pivot Screw
    New Generation, the blade stop pin has been relocated next to the pivot.
    This is pre-owned and like new and will come with Hinderer Box/Baggie. Smooth opening action, Early lockup, and centered blade.
    Traded

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Battle Mistress Fighter Variant .275" Competition Finish Blade Tan Canvas Handles with Brass Tube Fasteners
    10.1" Blade 15.25" Overall .275" Thick
    This will come with a Black/Brown Basket Weave Rowe' Leather Custom Sheath. This is a Old School Variant that was probably hand ground free hand by Jerry Busse himself around 2000 or before. This was made from INFI steel and has a sharpened top edge. The sheath was custom made for this exact knife by Kenny Rowe!
    As you can see from my pictures, you can still see the grind lines on the knife itself and at that time was about as good as it gets. You can see the INFI dimples right before the handles, so I believe this is a true one of a kind hand ground custom on INFI steel done free hand. This is a True Grail! The V-ground Edge is Razor Sharp! INFI is a proprietary Steel is used by Busse Combat! This is Pre-owend but I believe was never used, carried or sharpened.
    Traded

    Persistence C136GP
    Closed Length: 4 1/8”
    Mfg. Numbers: C136GP
    Country Of Orgin: China
    Features: Spyderco Persistence overall length 6 7/8”.
    1. 4 1/8" closed linerlock.
    2. 8Cr13Mov stainless blade with thumb hole, blade is about 2 3/4" long.
    3. Black G-10 handles.
    4. Lanyard hole.
    5. Reversible stainless pocket clip.
    Traded

     
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Hinderer XM18 Production 3.5" Flipper, Stonewashed with Earth Brown G10
    Blade: S35VN
    Handle: Smooth G10
    Frame Lock & Pocket Clip: Titanium
    Blade Length: 3.50" (8.89 cm)
    Blade Thickness: 0.164" (0. cm)
    Handle / Scale Length: 4.75" (12.07 cm)
    Handle Thickness: 0.54” (1.37 cm)
    Overall Length: 8.25” (20.96 cm)
    5.60 oz (156.76 grams)
    Flat Blade Grind Skinner Profile
    Blasted then Stonewashed Finish on Blade
    Tumbled Frame Lock
    Lockbar Stabilizer (LBS)
    Reversible Pocket Clip for Tip Up or Tip Down Carry
    Lanyard Compatible
    Customizable Screw Plates and Scales
    Dual Thumbstuds
    Chemically Etched Hinderer Knives Logo on Blade Hinderer Name on Frame
    Brand New in Box with Baggie. Early Lockup with centered blade.
    This is Band new from the New York Custom Knife Show of 2014. I had Rick Hinderer personally autographed the box.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Custom Shop SOB .17" Saber Ground Satin Blade, Textured Orange/Black G10 Handle
    Son of Badger - SOB
    4.7" Blade Length 9.55" Overall Length .17" Blade Thickness 9.71 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom made for the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    Sold
     
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat MOABOLO .38" Black Blade w/CBT, Magnum Textured Olive Drab Green G10 (1 of 5)
    11.8" Blade Length 18.2" Overall Length .38" Blade Thickness 37.1 Ounces
    Black Crinkle Flat Ground Blade with CBT (Corrugated Bevel Technology) with a V-Ground Edge
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only 5 made in this color combination so this one is super rare and will never be done again!
    This is a very Limited Model made by Busse Combat Custom Shop and was only available in a previous online Ganza which didn't have the CBT (Corrugated Bevel Technology.) We do not know if Busse will ever make these monsters anymore so get this very limited Chopper while you can! The V-Grind Edge is Razor Sharp so very scary with so much weight and size behind it! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat at the 2015 Blade Show in Atlanta Ga! This has a INFI Steel that is .38" thick with a Black Crinkle Coated Blade! This is one monster of a chopper, with this being so thick and long, this is one large and heavy Chopper! This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat Knives. This knife will carry a lifetime warranty from the Busse Combat! This one is new and a RARE Super Find because they only made 5 in this color combination!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Fat NMFBM Variant .30" Black Bowie Blade, Magnum Textured Olive Green/Black G10 Handle
    NMFBM Nuclear Meltdown Fusion Battle Mistress
    11.3" Blade Length 17.65" Overall Length .30" Blade Thick
    Custom Shop Bowie Variant .30" Blade INFI Blade with V-Grind Edge
    Nuclear Meltdown Treatment only around the handles (Rounded Edges), the middle spine of the blade is squared off
    This knife was introduced in 2008 by Jerry Busse from the Busse Combat and has long since been discontinued. What's Special about this knife is that normal production NMFBM all had coated blades that were .25" Thick and the Limited Editions were all .27"-.28" Blades so super thick at .30" coated thick and was custom hand ground with a Bowie blade tip and squared spine! I purchased this brand new directly from Busse Combat at the Knob Creek Show 2015! I've never seen another one ever, so defiantly "One of a kind!" These are one of the Grail Knives of the Busse World! This one is brand new, never used, carried or sharpened. This has a V-Grind edge that is razor sharp!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Killa Zilla II .29" Convexed Satin Blade, Grey G10 Handles with Red/White/Blue Liners w/Solid Pins Killa Zilla II - KZII
    INFI Blade Steel
    11.75" Blade 18.5" Overall .29" Thick Convexed Blade
    This one is from the 2015 Blade Show in Atlanta Ga!
    These Killa Zilla II were introduced by Jerry Busse in 2010 and have long been discontinued. These were made after they made the Killa Zilla Test Team. They got the feedback positive and negative and made the changes to make these models! This one has the full height Convexed Satin Blade with zero edge with the blade starting at .29" thick! This has a custom hand smooth Grey G10 and White/Blue Liners making this a very thick handle and finished off with w/Solid Pins. This is rare because I have only see Busse use this color G10 a few times ever! The Full Height Convexed Blade with V-Grind Edge is Razor Sharp!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Custom Shop Son Of Badger SOB .17" Saber Ground Satin Blade, Black G10 G-rexed Smooth Orange G10 Handle
    4.75" Blade Length 9.55" Overall Length .17" Blade Thickness 10 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom made for the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    Sold
     
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat S.C.A.B.S. Small Choil Anorexic Boss Street Green & Black Cerakoted .155" Flat Ground Blade, Canvas Micarta Handle (1 of 5)
    Small Choil Anorexic Boss Street - S.C.A.B.S.
    4.25" Blade Length 9.15" Overall Length .155" Thick 6.515 Ounces
    Full Height Convexed INFI Blade with the Nuclear Meltdown treatment on the spine with a V-Ground edge.
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only Five made so this one is super rare and will never be done again!
    The Boss Street was introduced in 2009 and has been discontinued. This has a INFI Steel that is .155" thick with a Full Height Convexed Blade! This has a INFI Steel that is .155" Blade thickness. The Cerakote coats not only the blade but the Magnum Canvas Micarta Handles and protects it. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! The Blade steel is INFI which is a proprietary Steel is used only by Busse Combat knives. This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find Because this color combination was never offered when it was in production and only 5 ever made! Never Used, Carried or Sharpened!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat S.C.A.B.S. Small Choil Anorexic Boss Street Black/Grey/White Cerakoted .155" Flat Ground Blade, Canvas Micarta Handle (1 of 5)
    Small Choil Anorexic Boss Street - S.C.A.B.S.
    4.25" Blade Length 9.15" Overall Length .155" Thick 6.355 Ounces
    Full Height Convexed INFI Blade with the Nuclear Meltdown treatment on the spine with a V-Ground edge.
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only Five made so this one is super rare and will never be done again!
    The Boss Street was introduced in 2009 and has been discontinued. This has a INFI Steel that is .155" thick with a Full Height Convexed Blade! This has a INFI Steel that is .155" Blade thickness. The Black/Grey/White Cerakote coats not only the blade but the Magnum Canvas Micarta Handles and protects it. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! The Blade steel is INFI which is a proprietary Steel is used only by Busse Combat knives. This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find Because this color combination was never offered when it was in production and only 5 ever made! Never Used, Carried or Sharpened!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat S.C.A.B.S. Small Choil Anorexic Boss Street Red & Black Cerakoted .155" Flat Ground Blade, Canvas Micarta Handle (1 of 5)
    Small Choil Anorexic Boss Street - S.C.A.B.S.
    4.25" Blade Length 9.15" Overall Length .155" Thick 6.53 Ounces
    Full Height Convexed INFI Blade with the Nuclear Meltdown treatment on the spine with a V-Ground edge.
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only Five made so this one is super rare and will never be done again!
    The Boss Street was introduced in 2009 and has been discontinued. This has a INFI Steel that is .155" thick with a Full Height Convexed Blade! This has a INFI Steel that is .155" Blade thickness. The Cerakote coats not only the blade but the Magnum Canvas Micarta Handles and protects it. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! The Blade steel is INFI which is a proprietary Steel is used only by Busse Combat knives. This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find Because this color combination was never offered when it was in production and only 5 ever made! Never Used, Carried or Sharpened!
    Sold
     
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Zero Tolerance 0777-M390BLK DLC Coated Blade, Carbon Fiber Handle #260
    BLADE SIZE: 3.8"
    TOTAL SIZE: 8.8"
    CLOSED SIZE: 5"
    BLADE MATERIAL: Black DLC coated Stainless Bohler M390 Blade Steel
    HANDLE: Contoured Carbon Fiber
    SPACER/POCKET CLIP: Machined and Blasted Titanium
    WEIGHT: 4.1 oz.
    3D machined handle with inlaid locking bar. The ZT 0777 M390 has a full handle of carbon fiber that is super strong yet very light!
    Sub-frame Lock - lock of titanium inset into the handle of carbon fiber. I think the lock on this knife breaks new ground in the knife industry. You have the light strength of carbon fiber combined with the durability of titanium lock bar. The lock bar is fitted with a hardened stainless steel engagement plate that CAN BE ADJUSTED to compensate for wear over time.
    Smooth KVT bearing system for extremely smooth opening action. Fast flipper for easy right or left hand opening. Flipper serves as an index finger guard in the open position. Filed thumb rest on the blade spine for a secure grip in the open position.
    Full machined and blasted titanium pocket clip is designed for deep pocket carry. This is Brand New, never used, carried or sharpened! This includes the box and paperwork.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Team Gemini Light Brigade TGLB .27" Grey Blade w/Fuller, Hand Smoothed Magnum Black Canvas Micarta Handle
    TGLB - Team Gemini Light Brigade
    7.75" Blade 13.15" .27" Thick w/Fuller 16.64 Ounces
    Shallow Hollow Ground Blade with V-Ground Edge, Black INFI Blade
    This was the Famous knife used on TV series "The Walking Dead!" The Blended V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat at the Spring Knob Creek Show 2015! This has a INFI Steel that is .27" thick with a Grey Blade!
    Sold
     
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Jens Anso Ziggy Flipper #111161 3" Hand Rubbed RWL-34 Blade, Anodized Titanium Handle
    3" Blade Length 7" Overall .16" Blade Thickness 4.355 Ounces
    Hand Rubbed Satin RWL-34 Blade Anodized Green Titanium Handle Scales
    Anodized Blue Titanium Backspacers and Pocket Clip
    Here is a Rare Fun Flipper won in the lottery at the Blade 2015 Show. There were only a few of these knives available for lottery and I got to pick second. I couldn't make up my mind and asked Jens Anso which one he liked and he pointed to this one and said it was his favorite! This is not only beautiful but the flipping action on this is Ultra Smooth and Dead On! This has an early lockup with centered blade. There is no blade play in any direction. This has a strong detent followed by a fast smooth action! This is Dead Mint and Brand New. This was never used, carried or sharpened. I had asked Jens Anso to write the model down with the steel and had him sign the card which will go along with this knife.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Son of Badger .185" Saber Ground Competition Finish Blade, Magnum Orange/Black G10 Handle
    4.75" Blade Length 9.5" Overall Length
    Saber Ground Competition Finish INFI Blade w/Blended Convexed Edge
    This was a very Limited Production Run Busse Combat made for the Blade 2014 show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Son of Badger .185" Saber Ground Competition Finish Blade, Tan Canvas Micarta
    4.75" Blade Length 9.5" Overall Length
    Saber Ground Competition Finish INFI Blade w/Blended Convexed Edge
    This was a very Limited Production Run Busse Combat made for the Blade 2014 show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Microtech Marfione Custom: Anax Integral, Stonewash Elmax Blade, Titanium Handle
    Overall Length: 8 1/2 in
    Blade Length: 3 3/4 in
    Cutting Edge Length: 3 1/2 in
    Blade Thickness: .155 in
    Weight: 5 Ounces
    Blade Material: Elmax stainless
    Handle Material: Titanium
    Included: Padded zippered pouch, metal dagger logo patch, certificate
    The Anax is a superb piece of design from Tony Marfione that turned heads at the 2014 BLADE Show. The Anax is an integral frame knife. This means the frame of the knife is machined from one solid chunk of titanium rather than having a separate backspaced or stand offs. Besides the "cool guy" factor of the engineering it takes to do it, it results in a very solid feeling folder. The pocket clip is machined titanium with a silicon nitride bearing insert to make it easy to slip over the ridge in your pocket. The Anax comes with a devil's tail lanyard in titanium with a steel braided line. This can be easily removed and Tony hinted that there is more to come for this interface to customize your knife
    Lockbar features a replaceable 17-4 stainless interface for solid lock up. The Elmax stainless steel blade has a full length fuller groove to make the Anax easy to open regardless of grip. Blade rides on a ceramic bearing system for a smooth opening. Good design is really more than the sum of the parts/features. The Anax is a great feeling knife. It is very easy to carry for a larger folder and has a great blade to handle ratio. The solid integral frame has a very subtile wave on the flats.
    This is Brand New in Box and comes with the deluxe Marfione Custom packaging with carbon fiber look outer box, nylon pouch with metal dagger zipper pull, metal dagger logo velcro patch, and certificate. This has a smooth opening action, early lockup and centered blade.
    Sold
     
    Last edited by a moderator: Jun 25, 2015
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    Son of Badger .185" Saber Ground Competition Finish Blade, Brown/Black G10
    From Blade 2014 Sold
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,673
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Jim Burke/ Tashi Bharucha Crusader Shield DETOX
    The DETOX is an Collobration by Tashi Bharucha and Jim Burke.
    3.7" Blade Length 8.5" Overall Length .16" Blade Thickness 5.82 Ounces
    This has Jim Burke's incredible Pyramid Grind!
    Tashi has done over 30 collaborations with some of the top knife makers in the industry. He has an incredible flare for combining the styles of the maker and designer. The DETOX is a Tashi design that will be made by some of the top makers in the industry.
    154CPM Blade Steel that was hand rubbed finish. The handles are Heat Colored Titanium Crusader Shield Design.
    Smooth Flipping action with early solid lockup. This is brand new with a zippered pouch for storage or travel.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Strider Duane Dwyer Custom SNG, V Ground CTS204P Re-Curve, Hollow Ground, Step Pattern Moku-Ti/Titanium
    Specifications
    Overall Length: 8.25"
    Blade Length: 3.6"
    Cutting Edge Length: 2.85"
    Weight: 5.155 ounces
    Blade Steel: CTS204P 58-59HRC
    Handle Material:
    Display side: Moku-Ti (Zirc-Ti)Stepped Thermally Transformed to Blue
    Lock side - 6Al4V Titanium Stepped Thermally Transformed to Blue
    Titanium Hardware
    Blade profile is one of Duane's famous (or infamous) V Ground, Hollow Ground, Re-curve with a nice Hollow Ground main edge. Notice that the top spine of blade does not have the usual grooves (or jimping) for an extra clean, custom look. Comes with padded case. The blade has a solid lockup with a centered blade. This was purchased by a private collector at the TKI 2015 Show! This is New, never used, carried or sharpened and comes with a soft pouch for storage or carry. Solid Lockup with centered blade.
    Sold
     
Thread Status:
Not open for further replies.

Share This Page