1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 11th Thread

Liu Kang Oct 7, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame Sterling Silver Warrior Hook for Wallet Chains or Keychain
    This is one of the coolest accessories you can use to hook your chain or keys to your belt look on your pants. This would go so well with your other Steel Flame accessories. So this is a Highly Detailed and has a 3D Warrior Skull mounted on the bail attached to the custom hook. You know this one is Old School as it is in Sterling Silver and it's stamped "Steel Flame Sterling USA" on the inside of the hook. This is extremely rare as there weren't many ever made. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to dress up and hook your wallet chain or keys to your belt loop. Authentic Steel Flame hook. Ultra Rare and near impossible to find on the secondary market. Only serious collectors would appreciate the rarity of this piece. This pre-owned and used as you can see from the pictures. Here is your chance to own a beautiful piece of Steel Flame History!
    Sold
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Urban Grudge .22" Flat Saber Ground Satin Blade, Hand Smoothed/Shaped Tan G10/Green Canvas Micarta G-rexed Buckeye Wood Handle w/German Nickle Silver Tubes
    Urban Grudge - UG
    5.8" Blade Length 10.75" Overall Length 1.25" Blade Width .22" Blade Thickness 11.1 Ounces
    Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Smoothed/Shaped Tan G10/Green Canvas Micarta G-rexed Buckeye Wood Handle w/German Nickle Silver Tubes filled with Neon Yellow Resin
    INFI Blade Steel at 58-60Rc with Choil and Swedge
    This is Brand New directly from the 2017 Show Show in Atlanta GA. This is a one of a kind as they have not ever used this handle on this model knife before. The Urban Grudge is no longer available for sale through Busse Combat because it's Sold Out, and has been Discontinued!

    Jerry Busse introduced the Urban Grudge Limited Edition in March of 2010 in a online Ganza and has been discontinued. When the Urban Grudge was offered, it was only available with a Doublecut (bead-blasted) Blade finish with Black Canvas Micarta. This knife comes from the original HG55 design but they took off CBT (Corrugated Bevel Technology) and shortened and reshaped the handle to make it shorter and fit the handle better. And since the HG55 was a fighter knife, so is this one! This one is the New version using the blanks from the Limited Edition version with the Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge introduced by Garth Reckner in 2016 . The swedge on the top part of this knife is 5" long but is NOT sharpened. This particular one was custom made by the Busse Custom Shop just for the 2017 Show Show. They went all out with this handle and made a custom Hand Smoothed/Shaped Tan G10/Green Canvas Micarta G-rexed Buckeye Wood Handle finished off with German Nickle Silver Tubes than filled in with Neon Yellow Resin. You can tell by looking at this knife that a lot of thought, time and work went into this knife! This handle is so incredible because it is not only Hand Smoothed but also Hand Shaped. This is Brand New, never used, carried or sharpened.
    Sold
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Team Gemini Light Brigade TGLB .265" Competition Finish Blade w/fuller, Magnum Textured Black/Tan G10 Handle
    TGLB - Team Gemini Light Brigade
    7.75" Blade Length 13.15" Overall Length 1.35" Blade Width .265" Blade Thickness 17.9 Ounces
    Saber Ground Shallow Hollow Ground Blade with V-Ground Edge
    Magnum Textured Black/Tan G10 Handle
    INFI Blade Steel, Full Size Choil, Fuller (Blood Groove), Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This is Brand New purchased directly from Busse Combat. The TGLB - Team Gemini Light Brigade Model can no longer be order from the Busse Company
    because it's Sold Out, and has been Discontinued!

    These TGLB - Team Gemini Light Brigade were introduced by Jerry Busse in 2012 and have long been discontinued. The Team Gemini was made famous by the TV Series The Walking Dead where it was carried by the character Daryl Dixon and used to dispatch herds of zombies. It was made legendary by its use in military campaigns around the world. The Team Gemini is one of our most popular blades and for good reason. Now many people have pause the show and blown up the picture to see what knife was used and this would be the one in the color combination. The knife on the Walking Dead show has no coating and the ONLY version of the TGLB without the coating which is called "Competition Finish." This Competition Finish is not to be confused with the satin finish, this may have machining lines, dimples, scratches or whatnot. This knife was meant to be used. The handle is easy to identify and is this Magnum Textured Black/Tan G10 Handle. This one is Brand New and a RARE and a MUST Have for any Busse Collector! This is Brand New, never used, carried or sharpened.
    Sold
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Urban Grudge Limited Edition .22" Flat Saber Ground Satin Blade, Textured Magnum Maroon Canvas Micarta Handle
    Urban Grudge Limited Edition - UG LE
    5.8" Blade Length 10.75" Overall Length 1.25" Blade Width .22" Blade Thickness 11.1 Ounces
    Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Textured Magnum Maroon Canvas Micarta Handle
    INFI Blade Steel at 58-60Rc with Choil and Swedge
    This Model was available for sale starting March 9th 2016 through March 14, 2016 and has been discontinued so can no longer be order from the Busse

    Jerry Busse introduced the Urban Grudge Limited Edition in March of 2010 in a online Ganza and has been discontinued. When the Urban Grudge was offered, it was only available with a Doublecut (bead-blasted) Blade finish with Black Canvas Micarta. This knife comes from the original HG55 design but they took off CBT (Corrugated Bevel Technology) and shortened and reshaped the handle to make it shorter and fit the handle better. And since the HG55 was a fighter knife, so is this one! This one is the New version in the Limited Edition version with the Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge introduced by Garth Reckner in 2016. The swedge on the top part of this knife is 5" long but is NOT sharpened. This particular one comes with the Textured Magnum Maroon Canvas Micarta Handle. This uses the infamous INFI Blade steel which is a proprietary Steel is used only by Busse Combat knives. This was part of "Operation 2 Weeks!" Get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for a few days and than discontinued. This is Brand New, never used, carried or sharpened.
    Sold
     
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat NMSFNO .275" Bronze Blade, Magnum Textured Olive Green/Black G10 Handle
    NMSFNO - Nuclear Meltdown Special Forces Natural Outlaw
    8.15" Blade Length 14" Overall Length 1.75 Blade Width .27" Blade Thickness 21.8 Ounces
    Full Height Convexed Bronze Coated Blade with V-Ground Edge
    Magnum Textured Olive Green/Black G10 Handle
    INFI Blade Steel, Full Size Choil, Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This was Brand New purchased directly from Busse Combat! The NMSFNO is no longer being made and has been discontinued so get this while you still can.

    The NMSFNO was introduced in 2008 by Jerry Busse and have since than been discontinued. This is one of the most popular models that Busse has made and really in high demand by collectors. This is one of the two most voted as #1 choice of Busse knives if you can have only one Busse, so it says a lot. I purchased this knife directly from Busse Combat. This has a INFI Steel that is .275" thick with a special Garth Edition Bronze Coated Blade that was left over from the 2014 Blade Show! This Bronze coated was never used before and is not an option when ordering a production knife from Busse Combat. There is NO Garth's Tattoo etched on the other side of the blade. This has a Magnum Textured Olive Green/Black G10 Handle. There were only 2 of these NMSFNO in this color combination so this is Ultra Rare! This is Brand New, never used, carried or sharpened.
    Sold
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Custom Shop Rodent Trail .18" Flat Ground Satin Blade, Textured Orange/Green G10 Handle
    Rodent Trail
    4.3" Blade Length 9" Overall Length 1.1" Blade Width.18" Blade Thickness 6.55 Ounces
    Flat Ground Hand Finished Satin Blade Blade with a Fine V-Ground Edge
    Textured Orange/Green G10 Handle
    SR101 Blade Steel, Choil
    This was Brand New from the 2013 Blade Show in Atlanta Ga.

    This is directly from the 2014 Blade Show in Atlanta Ga! I bought this directly from Busse Combat (sister company of Swam Rats) so this is still brand new. This has a Flat Ground Hand Finished Satin Blade Blade with a Fine V-Ground Edge. Having a satin SR101 blade back in 2013 was very rare, most of them were all coated and so not many of these were ever made. This has a Textured Orange/Green G10 Handle. I don't believe Swamp Rat still makes this model anymore so get this while you still can. This is Brand New, never used, carried or sharpened.
    Sold
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    NJ37 Busse Combat Custom Shop Game Warden .225" Deep Hollow Satin, Black G10 G-rexed Grey/Yellow Striped Maple Wood Handle w/Mosaic Pins
    GW - Game Warden
    3.1" Blade Length 7.1" Overall Length 1.05" Blade Width .225" Blade Thickness 6.8 Ounces
    Hand Ground Deep Hollow Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Hand Smoothed Magnum Black G10 G-rexed Grey/Yellow Striped Maple Wood Handle w/Mosaic Pins
    INFI Blade Steel with Small Choil
    This is Brand New direct from the 2011 East Coast Custom Knife Show in NJ. The Game Warden has long been discontinued and is no longer being made so get this while you can!

    In 2006 Jerry Busse introduced the Game Warden which was sold almost exclusively though the Busse Custom Store. These were very popular models and were all made in certain color combination. This one however is not a production Game Warden and is full blown custom. The Busse Custom Shop started with a .225" thick Blank and did a hand ground Custom Deep Hollow Grind and put a very fine V-Ground edge that is super sharp! The Deep Hollow Grind is all done by hand and is Razor Sharp! The Deep Hollow Grinds on a Game Warden were never made as a production so very few exist! This Game Warden was custom made by the Busse Custom Shop and made for one of the 2011 East Coast Custom Knife Show in NJ ! This has a INFI Steel that is .225" Thick with a Satin Finish! The Deep Hollow Grind is all done by hand and is Razor Sharp! The Deep Hollow Grinds on a Game Warden were never made as a production so very few exist! This Magnum Black G10 G-rexed Grey/Yellow Striped Maple Wood Handle is finished off with Mosaic Pins. This knife is Beautiful and with the magnum handles, it really fills your handle with the thick handles. This is Brand New, never used, carried or sharpened.
    Sold
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat FMV14 .26" Competition Finish Blade with CBT's, Textured Red/Black G10 Handle
    Force Multiplier V14 - FMV14
    14.15" Blade Length 20.7" Overall Length 1.7" Blade Width .26" Blade Thickness 33 Ounces
    Double Edged Saber Ground Competition Finish Blade w/CBT (Corrugated Bevel Technology) and V-Ground Edge
    Textured Red/Black G10 Handle
    INFI Blade Steel, CBT (Corrugated Bevel Technology) and Skull Crusher
    This one is Brand New purchased directly from Busse Combat! The Force Multiplier V8 "Studio B" Edition have been Sold out and discontinued!
    The The Force Multiplier V8 was introduced in May 12, 2018 and here is what Jerry Busse said about this sword:
    Now, the Force Mama V14 is coming for a VERY LIMITED engagement and the family resemblance is shocking!!!!!!
    The FMV14 sports a slightly convexed bevel for strength and durability!
    It's everything you loved about the FMV8 with a huge dose of porcine steroids!

    This is a true Double Edged Dagger with a Convexed Bevel with CBT (Corrugated Bevel Technology) and a fuller down the middle with two V-Ground edges. This has a Double Edged Saber Ground Competition Finish Blade w/CBT (Corrugated Bevel Technology) and V-Ground Edge. If you look at the specs on this, this is easily strictly a one handed sword. Now this short sword reminds me of the now discontinued Gladius except this one is thinner, lighter and I think This is Brand New: Dead Mint never used, carried or sharpened.
    Sold
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame Sakura Dragon Double Action KillboX
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Urban Grudge Limited Edition .22" Flat Saber Ground Satin Blade, Textured Magnum Olive Green/Black G10 Handle
    Urban Grudge Limited Edition - UG LE
    5.8" Blade Length 10.75" Overall Length 1.25" Blade Width .22" Blade Thickness 11.6 Ounces
    Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Textured Magnum Olive Green/Black G10 Handle
    INFI Blade Steel at 58-60Rc with Choil and Swedge
    This Model was available for sale starting March 9th 2016 through March 14, 2016 and has been discontinued so can no longer be order from the Busse

    Jerry Busse introduced the Urban Grudge Limited Edition in March of 2010 in a online Ganza and has been discontinued. When the Urban Grudge was offered, it was only available with a Doublecut (bead-blasted) Blade finish with Black Canvas Micarta. This knife comes from the original HG55 design but they took off CBT (Corrugated Bevel Technology) and shortened and reshaped the handle to make it shorter and fit the handle better. And since the HG55 was a fighter knife, so is this one! This one is the New version in the Limited Edition version with the Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge introduced by Garth Reckner in 2016 . The swedge on the top part of this knife is 5" long but is NOT sharpened. This particular one comes with the Textured Magnum Olive Green/Black G10 Handle. This uses the infamous INFI Blade steel which is a proprietary Steel is used only by Busse Combat knives. This was part of "Operation 2 Weeks!" Get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for a few days and than discontinued. This is Brand New, never used, carried or sharpened.

    Sold
     
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    BATAC Battle Grade .20" Saber Flat Ground Shadow Camouflage Blade, Textured Black Canvas Micarta Handle
    Badger Attack TAC - BATAC
    5.3" Blade Length 10.95" Overall Length 1.55" Blade Width .20" Blade Thickness 13.40 Ounces
    Saber Flat Ground Custom Shadow Camouflage Coated Blade with V-Ground Edge
    Textured Black Canvas Micarta Handle
    This uses the SR-101 Blade steel with a 58-60Rc.
    This Model was available for sale starting November 19, 2015 through December 3, 2015 and has been discontinued so can no longer be order from the Busse Company Website! This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta Ga.

    The Badger Attack TAC was introduced in 2007 by Jerry Busse and was discontinued. Jerry than decided to make a Battle Grade version so that most people could afford it by using SR-101 Steel and coated all of them. We are now proud to offer it in a Battle Grade version making it much more affordable for everyone who has ever wanted to own one. As part of "Operation 2 Weeks" it won't be around for long but I have little doubt that it will be our fastest selling Battle Grade to date! For the 2016 Blade Show in Atlanta Ga, Busse Combat wanted to do something a little bit different so made this with a Custom Shadow Camouflage. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for two weeks and than discontinued. This is Brand New, never used, carried or sharpened.
    Sold
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Silent Knight .22" Aged Bronze Cerakoted Blade with CBT's, Magnum Textured Handle
    Silent Knights - SK
    10" Blade Length 15.7" Overall Length 1.65" Blade Width .22" Blade Thickness 19.1 Ounces Saber Ground Saber Ground Aged Bronze Cerakoted Finished Blade w/CBTs with a V-Ground Edge
    Textured Handle which can be either Canvas Micarta or G10 but is unknown because it's also protected and coated with the Cerakote Coating
    INFI Blade Steel, CBT (Corrugated Bevel Technology) INFI Blade Steel, Swedge, CBT (Corrugated Bevel Technology), Large Choil & Blade Catcher (Hook)
    This is Brand New purchased directly from Busse Combat Custom Shop. This model The Silent Knight w/CBT Model was part of "Operation Two Weeks" and available for sale starting November 8, 2017 through November 11, 2017 and has been discontinued so can no longer be order from the Busse Company Website!

    Jerry Busse made and introduced first Silent Knight was before 1997. I believe the first one was made in A2 Steel but after they were made in INFI but all were all made through the Busse Custom Shop because with each and every one being made by hand and all of them being full customs. The Silent Knight was never available for sale through the Busse Combat website as there was never a "production model." Only a handful were made for shows and Ganzas so very rare to see one for sale! There were only a few handful known to exist and a true Grail for most Busse collectors. If you were lucky you were at a show where one was available but then, getting it, that's a different story. Well, in 2017, Jerry decided to a very short run for "Operation Two Weeks" and because he wanted everyone to have an opportunity, he made it with three major versions. Here is what he said about them:

    For more than 20 years, the only way to score one of these legendary blades has been through the Busse Custom Shop! Now, featuring our patented Busse Corrugated Bevel, the Silent Knight is coming to you in a small production run. There are 3 base renditions of the Silent Knight available, including a Competition Finished INFI edition, a coated INFI Combat Grade edition, and a coated SR-101 Battle Grade edition...

    So these were available for order for two days and were "Sold Out!" The Silent Knight have been the one of the Ultimate Grail knives for all Busse collectors since so few were ever made and so very hard to come by. These Silent Knight are made to be the Ultimate Fighting knife and I feel they may be. These are thin and not too thick so it is not heavy. The handle is shorter for one hand only and has a nice long re-curve blade and has the blade catcher (hook) on the top! This particular one was made by the Busse Custom Shop and NOT one of the standard production ones you order. I think this one was made either as a prototype or was Cerakoted by mistake as there was never any runs of this model with a Cerkote coating. I have not seen another one of these so only the shop really knows if more than one of these were ever made. This starts off with the blanks from the 2017 Silent Knight with the patented Corrugated Bevel Technology (CBT), and than the entire knife was Cerakoted with the Aged Bronze coating. The Cerakote cover not only the blade but the Textured Handle and protects it. The handle material is either canvas micarta or G10 but is unknown because it is coated but either way, it also is covered with the lifetime warranty. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is Brand New, never used, carried or sharpened as I bought this directly from Busse Combat.
    Sold
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat FMV14 3B Prototype .25" Nuclear Fallout Cerakoted w/CBT's, Textured Handle
    Force Multiplier V14 - FMV14
    14.15" Blade Length 4.75" Sharpened Top Front Edge 20.7" Overall Length 1.7" Blade Width (widest point) .25" Blade Thickness 31.2 Ounces
    Double Edged Saber Ground Spear Tip in a Nuclear Fallout Cerakoted Blade w/CBT (Corrugated Bevel Technology) and V-Ground Edge
    Textured Handle which can be either Canvas Micarta or G10 but is unknown because it's also protected and coated with the Cerakote Coating
    INFI Blade Steel, CBT (Corrugated Bevel Technology), Full size Choil
    This one is Brand New purchased directly from Busse Combat! This was only available in the AnniversaryGanzaaa held online on January 23, 2022!

    The FMV14 3A & 3B Prototype was introduced in January 2022 and here is what Jerry Busse said about this sword:

    FMV14 Prototypes with all hand ground profiles that may slightly vary with Cerakote

    So Busse Combat did an Ultra small very Limited run of these "FMV14 Prototype" in [ 3A ] FMV14 Prototype Antique Bronze Cerakote & [ 3B ] FMV14 Prototype Nuclear Fallout Cerakote finish. This is a true Double Edged Dagger tip a Convexed Bevel with CBT (Corrugated Bevel Technology) and a fuller down the middle with two V-Ground edges. There were very small quantities of these made 3A Aged Bronze and 3B Nuclear Fallout Cerakoted and they have been Sold Out! The Cerakote cover not only the blade but the Textured Handle and protects it. The handle material is either canvas micarta or G10 but is unknown because it is coated but either way, it also is covered with the lifetime warranty. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged/worn. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is Brand New: Dead Mint never used, carried or sharpened.
    Sold
     
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Active Duty .185" Saber Ground Tanker Grey Blade, Textured Black/Green G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.4 Ounces
    Saber Ground Tanker Grey Coated Blade with a V-Ground Edge
    Textured Black/Green G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is like New, never used, carried or sharpened.
    Sold
     
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade AK47 .21" Blended Saber Ground Urban Camo SR101 Blade, Textured Black G10 Handle
    American Kenzi 47 - AK47
    18.5" Blade Length 29.05" Overall Length 1.3" Blade Width .192" Blade Thickness 29.8 Ounces
    Blended Saber Ground Urban Camouflage Coated Blade with V-Ground Edge
    Textured Black G10 Handle
    SR101 Blade Steel, 58-60Rc with Choil
    This is Brand New purchased directly from Busse Combat and the very last ones Busse has made. This Battle Grade AK47 Model was available for sale starting December 9, 2015 through December 12, 2015 and has been discontinued so can no longer be order from the Busse Company Website!

    The Busse Combat AK47 was first introduced by Jerry Busse in 2005 and has long been discontinued. We are now proud to offer it in a Battle Grade version making it much more affordable for everyone who has ever wanted to own one. As part of "Operation 2 Weeks" it won't be around for long but I have little doubt that it will be our fastest selling Battle Grade to date! These "Sold Out" in less than four days! What makes this one special is it has the Urban Camouflage Coated Blade which matches perfectly with the black in the handle. For the handle, they went with a Textured Black G10 Handle! This was purchased directly from Busse Combat by myself and has been in my personal collection ever since. This is Brand New, never used, carried or sharpened. This retains the original untouched factor edge. This is made of SR101 Blade Steel! This knife will be backed 100% with Lifetime Warranty from Busse Combat!
    Sold
     
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Max Duty Hack .095" Hollow Ground Doublecut ElMax Blade, Yellow/Black G10 Handle
    Active Duty - AD
    3.35" Blade Length 7.65" Overall Length 1.05" Blade Width .095" Thickness 3.75 Ounces
    Saber Hollow Ground Doublecut Blade with V-Ground Edge
    Hand Smoothed/Shaped Yellow/Black G10 Handle
    ElMax Blade Steel, Full Sized Choil
    This is Brand New directly from 2014 Fall Knob Creek Show in KY. The Max Duty and Active Duty is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. The MAX Duty were introduced by Busse Combat at the Blade 2014 and very models were produced as these were not a normal production run. The reason for using the new Elmax steel is because for how thin the blade is, the Busse Combat heat treat makes it really strong and have great edge retention so it will stay sharper for longer periods of time with use without having to sharpen as often. The Max Duty was only made in a small run in certain color combinations for certain Ganzas and Shows! For the 2014 Fall Knob Creek Show, Busse made a handful of these Max Duty Hack with a doublecut finish on Elmax Steel. Not many made with a full size choil, which means you can choke up on the knife or hold the knife in a reverse grip and be very fictional for a powerful grip. This is a HOG Apprentice Custom Knife (HACK) but I think it was just labeled as such and not made by an actual apprentice because I see nothing but perfect lines with a flawless edge. This has a Saber Hollow Ground Doublecut Finished Elmax Blade with V-Ground Edge that is Razor Sharp! The Busse Custom Shop made this beautiful custom just for the 2014 Blade Show. This one comes with the Hand Smoothed/Shaped Yellow/Black G10 Handle. This is the thinnest blade Busse ever made to put on a duty model and it's a real slicer! This knife fits very well in the hand, smooth and not too big, it allows you to easily control slicing with this ultra thin sharp blade. This is Brand New, never used, carried or sharpened.
    Sold
     
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame 3D XL Bronze Hard Hannya Skull Pocket Clip for the to Torch/Flashlight

    This is one of the coolest accessories you can add to your Torch or Flashlight. So this is a Highly Detailed 3D Hard Hannya Skull mounted on a pocket clip to dress up your Torch/Flashlight and is brought to you by Steel Flame. This is extremely rare because of the super low amount made. I am listing this only as a XL but I think it may be even bigger and more of a XXL mounted on a pocket clip. I have an older model Hard Hannya in silver mounted on a three hold clip that I know is an XL and I took one picture of them together so you can see the size difference. This is finished in their Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to dress up your ultimate compact flashlight. Authentic Steel Flame 3 XL Bronze Hard Hannya Skull. This Clip is made for the Torch/Flashlight is highly detailed. Ultra Rare and near impossible to find on the secondary market. Only serious collectors would appreciate the rarity of this piece. The Clip itself is only marked with the "Steel Flame" logo and "USA" on the back so you know this is authentic. This listing is for ONLY the CLIP and DOES NOT INCLUDE the Hanko Flashlight. This is Brand New and only mounted on the torch so you and picture this on your light and have an ideal of how it will look. This was never used and only mounted on this torch for pictures. This is for just the clip and does NOT have the pouch or anything else included.
    Sold
     
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Active Duty .185" Saber Ground Tanker Grey Blade, Textured Black/Green G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.4 Ounces
    Saber Ground Tanker Grey Coated Blade with a V-Ground Edge
    Textured Black/Green G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is like New, never used, carried or sharpened.
    Sold
     
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Jack Hammer Variant .18" Flat Saber Ground Satin Blade, Full Two-Toned Oak Wood Handle w/German Nickle Silver Tubes & Yellow/Black Liners
    JH - Jack Hammer
    6.4" Blade Length 11.95" Overall Length 1.5" Blade Width .18" Blade Thickness 12.65 Ounces
    Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Smooth Full Two-Toned Oak Wood Handle w/German Nickle Silver Tubes & Yellow/Black Liners
    INFI Blade Steel, Full Size Choil & Skull Crusher
    This is Brand New directly from Busse Combat. The JH - Jack Hammer has been discontinued by Busse Combat and now now long available and can no longer be ordered so get this before it's gone!

    The JH - Jack Hammer was introduced in 2006 by Busse Combat and have since than been discontinued. The original JH - Jack Hammer Where coated blades with CBT (Patented Corrugated Bevel Technology). This model came back in 2008 with the Hell Razor in a 2008 Special Edition in a Competition Finish and than in 2009, Jerry Brought the Sledge Hammer which was a FAT .32" Blade. Those are the only three times that this model came out. Well, it seems this is a variant now appearing in about the same blade thickness with the Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge with NO CBT's. That V-Ground edge that is Razor Sharp. The Busse Custom Shop decided to go over the top with the handles and did a Custom Hand Smooth Full Two-Toned Oak Wood Handle finished off with German Nickle Silver Tubes & Yellow/Black Liners. This has a INFI Steel that is a incredible .18" thick with a Hand Finished Satin Blade which is extremely rare. This was a very special "One of a Kind" knife that was ever made! It's a lighter and faster slicer. This is Brand New, never used, carried or sharpened.
    Sold
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,633
    106
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Short 3.5" Elmax Steak Knife .095" Satin Hollow Saber Ground Blade, Tan Canvas Micarta G-rexed Blood Wood Handle w/Mosaic Pins & Yellow Liners
    Elmax Steak Knife
    3.45" Blade Length 8" Overall Length .8" Blade Width .095" Blade Thickness 3.45 Ounces
    Hollow Saber Ground Hand Finished Satin Elmax Blade with a Fine V-Ground Edge
    Custom Hand Smoothed Tan Canvas Micarta G-rexed Blood Wood Handle w/Mosaic Pins & Yellow Liners
    Elmax Blade Steel, Small ChoilThis is Brand New directly from the 2017 Show Show in Atlanta GA. This is a one of a kind as they have not ever used this handle on this model knife before. The Elmax Steak Knife is no longer available for sale through Busse Combat because it's Sold Out, and has been Discontinued!


    The Elmax Steak Knife was introduced by Busse at the 2013 Blade Show and has long been since discontinued. This knife is one of the rare knives that Busse didn't use INFI Steel on, this one is made of Elmax Steel and is super thin and even Sharper! There were different length made of this knife and this is the shortest length out of the three. This has a saber hollow grind on this super thin blade with a hand finished satin blade. The Busse Custom Shop went all out on this handle which is a Custom Hand Smoothed Tan Canvas Micarta G-rexed Blood Wood Handle finished off with Mosaic Pins & Yellow Liners. The Tan Canvas Micarta matches the Blood Wood so well and the bright Yellow Liners really set it off showing off the square lines. You will never see another even close to this and can see a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! This knife will carry a lifetime warranty from Busse Combat! The Hollow Saber Ground Hand Finished Satin Elmax Blade with a V-Ground Edge is razor sharp. Busse has an insane heat treatment process that makes such a ultra thin blade so strong and retains such a sharp edge. This is what makes this light knife a real slicer and perfect for a steak knife! This is Brand New: never used, carried or sharpened.
    Sold
     

Share This Page