1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 11th Thread

Liu Kang Oct 7, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Short American Butaniku Sword .256" Aged Bronze Cerakoted, Textured Handle (1 of 5)
    23.65" Blade Length 35.90" Overall Length 1.25" Blade Width .256" Blade Thickness 39.2 Ounces
    Saber Ground Blade with Fuller and V-Ground Edge
    Textured Canvas Micarta or G10 Handle with Cerakote Coating
    INFI Blade Steel
    This was Brand New purchased directly from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only 5 made so this one is super rare and will never be done again!
    This Short American Butaniku Sword is a beautiful knife made by Busse Combat Custom Shop. This model was made because some people thought that the full size Butaniku was too long and heavy. And than the Busse Combat Custom Shop created this. I think many would say that the weight and balance of this sword is much better now. The problem is that this was never a production Sword, only a few of these were shows and ganzas. This has a V-Ground Edge. This particular knife was purchased by me directly from Busse Combat at the Blade 2015 Show. There were only 5 of these made in this Aged Bronze Cerakoted combination. The Cerakote cover not only the blade but the Handles and protects it. Because the actual handle is covered, you can not see what the handle material is and will either be G10 or Canvas Micarta. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, you never know! INFI is a proprietary Steel is used ONLY by Busse Combat knives and is Legendary! This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find as only 5 were ever made for this color/model! This is Brand New: Never Used, Carried or Sharpened!
    Sold
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Team Gemini .255" Saber Ground Satin Blade, Magnum Textured Black G10 Handle
    Team Gemini - TG
    7.65" Blade Length 13" Overall Length 1.5" Blade Width .255" Blade Thickness 21.1 Ounces
    Saber Ground Hand Finished Satin Blade with a Blended Convexed Edge
    Magnum Textured Black G10 Handle
    INFI Blade Steel, Full Size Choil with Swedge
    This is Brand New directly from the 2014 Blade Show in Atlanta Ga. The Team Gemini is no longer available for sale through the Busse Combat because it has been Discontinued!

    The Team Gemini was introduced in 2010 and have since been discontinued. The Team Gemini was made famous by the TV Series The Walking Dead where it was carried by the character Daryl Dixon and used to dispatch herds of zombies. It was made legendary by its use in military campaigns around the world. Since than, there have been many version of the Team Gemini. This is the ONLY version of the Gemini that are production version with a satin blade. There was never a Limited Edition made for the Team Gemini but if there was one, this would have to be it. There were very few of these Hand Finished Satin Blade made Busse Combat Exclusively for Blade 2014 only a few in each color where I purchased this knife directly from Busse Combat. Very few of these were made with the Magnum Textured Yellow/Black G10 Handle. This has a INFI Steel that is .25" Thick Saber Ground Hand Finished Satin Blade with a Convexed Blended Edge! The Blended Convexed Edge is Razor Sharp! I purchased this knife directly from Busse Combat so this is in Brand New Condition. This has never been used, carried or sharpened.
    Sold
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Snap-On PB17A 22 pc 3/8" Drive 6-Point SAE General Service Socket Set

    Features
    • Includes (22) Shallow Sockets (3/8–3/4") and Deep Sockets (3/8–3/4")

    • Includes Dual 80® Technology Standard Handle Ratchet, 13/16" Spark Plug Socket, 5/8" Spark Plug Socket, Breaker Bar, Universal Joint and 3, 4 and 8" Knurled Extensions in a storage case

    As you can see from the pictures this is in beyond Excellent Condition. You will get everything you see in the pictures. This is pre-owned which was lightly used if ever. The first owner etched initials/name into each piece as most owners would. That's the only thing that prevents this from being perfect. As you already know, this is $805 directly from Snap-On.
    Sold
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Max Duty Hack .095" Hollow Ground Doublecut ElMax Blade, Orange/Black G10 Handle
    Active Duty - AD
    3.35" Blade Length 7.65" Overall Length 1.05" Blade Width .095" Thickness 3.75 Ounces
    Saber Hollow Ground Doublecut Blade with V-Ground Edge
    Hand Smoothed/Shaped Orange/Black G10 Handle
    ElMax Blade Steel, Full Sized Choil
    This is Brand New directly from 2014 Fall Knob Creek Show in KY. The Max Duty and Active Duty is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. The MAX Duty were introduced by Busse Combat at the Blade 2014 and very models were produced as these were not a normal production run. The reason for using the new Elmax steel is because for how thin the blade is, the Busse Combat heat treat makes it really strong and have great edge retention so it will stay sharper for longer periods of time with use without having to sharpen as often. The Max Duty was only made in a small run in certain color combinations for certain Ganzas and Shows! For the 2014 Fall Knob Creek Show, Busse made a handful of these Max Duty Hack with a doublecut finish on Elmax Steel. Not many made with a full size choil, which means you can choke up on the knife or hold the knife in a reverse grip and be very fictional for a powerful grip. This is a HOG Apprentice Custom Knife (HACK) but I think it was just labeled as such and not made by an actual apprentice because I see nothing but perfect lines with a flawless edge. This has a Saber Hollow Ground Doublecut Finished Elmax Blade with V-Ground Edge that is Razor Sharp! The Busse Custom Shop made this beautiful custom just for the 2014 Blade Show. This one comes with the Hand Smoothed/Shaped Orange/Black G10 Handle. This is the thinnest blade Busse ever made to put on a duty model and it's a real slicer! This knife fits very well in the hand, smooth and not too big, it allows you to easily control slicing with this ultra thin sharp blade. This is Brand New, never used, carried or sharpened.
    Sold
     
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Rick Hinderer Eklipse No. 9 of 12 Tanto - Stonewash Titanium Handle
    9 of 12 Custom Eklipse from 2014 TKI Show
    Hollow Ground Tanto S35VN Blade, Flipper
    Stonewash Titanium Handle, Filler Tab, Pocket Clip, Pivot Screw, Back Spacers, Handle Nuts/Screws, Lockbar Stabilizer
    Specifications
    Overall Length: 8.25 in
    Blade Length: 3 5/8 in
    Cutting Edge Length: 3 1/2 in
    Blade Thickness: .165 in
    Closed Length: 4.72 in
    Weight: 5 Ounces
    Blade Material: S35VN
    Handle Material: Titanium
    This is Brand New with a Hinderer box and baggie from the 2014 Tactical knife Invitational (TKI) Knife Show of 2014 in Las Vegas NV. At these TKI shows, the best knife makers from around the world present their very best and newest design knives but sale and auctions. Rick Hinderer decided to debut the newest design which was the Eklipse but needed to really show it off with custom grinds and handles. To make them all different and a full one of a kind customs, he made only 12 total custom knife with only four different grinds so there were three customs with each grind! All of them were different handle finishes so each one is "One of a Kind!" What is very interesting about these knives that most people didn't know was that they not only did a full titanium handles, but went over the top by hollowing out the inside of Both sides of the Titanium slabs to reduce the overall weight. It was a lot of extra work to save a little bit of weight. So much went into the details to create a much better lighter knife to make the balance better. So this Eklipse is a bit longer than the XM18 3.5" model and even though it has a full Titanium Handle instead of the Titanium Liner with G10, this knife actually weighs less!


    This will NOT come with the original box with the sticker on it but just a standard Hinderer box. The grind is a Tanto Blade with a very aggressive grind.
    This has an ultra smooth Flipping Action with early solid lockup and a perfectly centered blade. This will come Brand New in Box, Baggie. Early Lockup with centered blade. This is Brand New: never been used, carried or sharpened.
    Sold
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Team Gemini Battle Grade .233" Saber Flat Ground Black Crinkle Blade w/Fuller, Textured Magnum Tigerhide Canvas Micarta Handle
    TGBG - Team Gemini Battle Grade
    7.8" Blade Length 13.25" Overall Length 1.55" Blade Width .233" Blade Thickness 18 Ounces
    Black Crinkle Coated Flat Saber Ground Blade w/Fuller with V-Ground Edge
    Textured Magnum Tigerhide Canvas Micarta Handle
    This uses the SR-101 Blade steel with a 58-60Rc. and has a large choil.
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The TGBG - Team Gemini Battle Grade has been discontinued by Busse Combat and now now long available and can no longer be ordered so get this before it's gone! This Model was available for sale starting October 7, 2015 through October 21, 2015 and has been discontinued so can no longer be order from the Busse Company Website!

    These TGLB - Team Gemini Light Brigade were introduced by Jerry Busse in 2012 and have long been discontinued. The Team Gemini was made famous by the TV Series The Walking Dead where it was carried by the character Daryl Dixon and used to dispatch herds of zombies. It was made legendary by its use in military campaigns around the world. The Team Gemini is one of our most popular blades and for good reason. We are now proud to offer it in a Battle Grade version making it much more affordable for everyone who has ever wanted to own one. As part of "Operation 2 Weeks" it won't be around for long but I have little doubt that it will be our fastest selling Battle Grade to date! There were not many of these made and was only available for two weeks and than discontinued. This was purchased directly from Busse Combat by myself at the 2017 Blade Show in Atlanta Ga which was made with the Textured Magnum Tigerhide Canvas Micarta Handle which was never an option when you could order the TGBG - Team Gemini Battle Grade in Operation Two Weeks. This knife has a This is Brand New, never used, carried or sharpened.
    Sold
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Chris Reeve Large Sebenza Classic MM Unique Graphic S30V July 20, 2006

    Specifications
    Overall Length: 8.35"
    Blade Length: 3.6"
    Blade Thickness: 0.125"
    Blade Material: S30V
    Handle: Anodized Titanium
    Lock: Frame Lock
    Closed Length: 4.71"
    Clip: Yes
    Weight: 4.7 oz.

    Brand New In Box with all Paperwork and accessories which includes, Care Sheet/paperwork, Tool (taped to lid of box from CRK), Leather Sheath (original), Box and DOB. This is a true barn find. The original owner purchase this knife from a dealer in TX and has kept this in safe till recently when he passed. This was never used, carried or sharpened as you can see from the pictures. Everything is in the same condition as it came directly from Chris Reeve Knives in 2006. This is a Large Sebenza Classic MM with Unique Graphic as you can see from the pictures. As most CRK collectors know, they stopped making the Classic in 2008. Unique graphics which are one of a kind deigns. All paperwork that comes with this along with box matches as it should for this exact knife. The S30V blade steel as marked on the DOB is time correct also. The blade is truly beautiful and flawless and at seems different from different angles. I believe this is in New unused condition but this does not show any signs of carry or use. Extremely rare and won't be easy finding another one similar to this one. Because this is a Unique one, you will NEVER find one exactly like this one! This is a True Grail Knife! This has smooth opening action, Solid Lockup and Centered Blade. This is Brand New in Box, never used, carried or Sharpened.
    Sold
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Jonathan McNees Ankylos .155" CPM-154 Blade, LSCF Bolstered, Black Canvas Micarta Handle with Titanium Lock Side/Liners
    Blade Length: 3.3″
    Overall Length: 7.6″
    Blade Thickness: .155"
    Blade Width: .85"
    Weight: 3.6 Ounces
    Handle Material: Lighting Strikes Carbon Fiber Bolstered Black Canvas Micarta Handle Display Side, Anodized Titanium Lock Side/Liner
    Back Spacer & Pivot Collar: Copper
    Blade Steel: CPM-154
    Clip: 3-D Milled Tip-up Bead Blasted Titanium Pocket Clip
    Pivots System: Caged Bearings Pivots
    Carbonized Lockface Heat Colored Hardware
    Hand Saber Ground Stonewashed/Bead Blasted Re-Curved Blade with a V-Ground Edge and Swedge

    This is a Brand New Custom Flipper from Jonathan McNees at the 2017 Blade Show in Atlanta Ga where I won the lottery on June 2, 2017! This beautiful custom knife just for this show lottery. He only made a few customs for Lottery on Friday and for lottery for Saturday, and this one is from the Friday's lottery. This is one of his newer models called "Ankylos!" This is a great small and light knife for everyday carry. This has a strong detent with great flipping action when engaged. This is a full blown custom using only some of the best and highest quality/beautiful materials. The handle has a Carbon Fiber Bolstered Black Canvas Micarta Handle Display Side along with a Anodized Titanium Lock Side/Liner. The Stonewashed/Bead Blasted finish on the Re-Curved Blade with a V-Ground Edge and Swedge makes is hard to see any use should you want to actually carry and use this knife. Nice strong detent along with Caged Bearings Pivots produces some fast action. This comes with a Tag, sticker, custom pouch and makers card with specs.This has a Strong Detent, and flies out with a quick flip of the finger with no wrist action. This has an Early Lockup with centered blade. I personally won the lottery at the 2017 Blade Show. This is in Dead Mint Condition and has never been used, carried or been sharpened.
    Sold
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Ergo Public Defender BG .175" Saber Ground Sage Crinkle Blade, Textured Tan Canvas Micarta Handle
    Ergo Public Defender Battle Grade - EPD BG
    4.35" Blade Length 9.05" Overall Length 1.05" Blade Width .165" Blade Thickness 6.9 Ounces
    Flat Saber Ground Sage Crinkle Coated Blade with a V-Ground Edge
    Textured Tan Canvas Micarta Handle
    SR101 Blade Steel, 58-60Rc with Small Choil
    This is Brand New purchased directly from Busse Combat. This Ergo Public Defender Battle Grade model was available for sale starting April 27th 2016 through May 5th, 2016 and has been discontinued so can no longer be order from the Busse Combat.

    The original Public Defender was introduced by Jerry Busse in 2002. This was a really cool knife with only a 4.5" blade at about .187" thick. This is about as close to a Tanto Blade as you were going to get from Busse Combat. Well, fast forward 14 years later, Busse takes the design and adds an Ergo Handle to the design and makes it in three versions. Garth Reckner first introduced the Ergo Public Defender Battle Grade in 2016 and it has since been discontinued. There were three versions are Ergo Public Defender which are the Limited Edition, the thick version called the Fatback Defender and the Ergo Public Defender Battle Grade! As part of "Operation 2 Weeks" it last long but and "Sold Out" in only a few days! This Battle Grade uses the SR101 blade steel and is much more affordable for those taht want the best but may be on a budget. This has a Flat Saber Sage Crinkle coated Blade with a V-Ground Edge that is razor sharp. This is Brand New, never used, carried or sharpened.
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat NMSFNO .275" Bronze Blade, Magnum Textured Olive Green/Black G10 Handle
    NMSFNO - Nuclear Meltdown Special Forces Natural Outlaw
    8.15" Blade Length 14" Overall Length 1.75 Blade Width .27" Blade Thickness 21.8 Ounces
    Full Height Convexed Bronze Coated Blade with V-Ground Edge
    Magnum Textured Olive Green/Black G10 Handle
    INFI Blade Steel, Full Size Choil, Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This was Brand New purchased directly from Busse Combat! The NMSFNO is no longer being made and has been discontinued so get this while you still can.

    The NMSFNO was introduced in 2008 by Jerry Busse and have since than been discontinued. This is one of the most popular models that Busse has made and really in high demand by collectors. This is one of the two most voted as #1 choice of Busse knives if you can have only one Busse, so it says a lot. I purchased this knife directly from Busse Combat. This has a INFI Steel that is .275" thick with a special Garth Edition Bronze Coated Blade that was left over from the 2014 Blade Show! This Bronze coated was never used before and is not an option when ordering a production knife from Busse Combat. There is NO Garth's Tattoo etched on the other side of the blade. This has a Magnum Textured Olive Green/Black G10 Handle. There were only 2 of these NMSFNO in this color combination so this is Ultra Rare! This is Brand New, never used, carried or sharpened.
    Sold
     
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop MOAB .405" Flat Ground Satin Blade, Magnum Black G10 G-rexed CrossCut Mammoth Ivory Handle w/Solid Brass Bolts
    MOAB - Mother Of All Bowie
    14.3" Blade Length 20.6" Overall Length 2.15" Blade Width .40" Blade Thickness 46 Ounces
    Flat Ground Hand Finished Satin Blade with a Blended Convexed Edge
    Custom Hand Smoothed/Shaped Magnum Black G10 G-rexed CrossCut Mammoth Ivory Handle w/Solid Brass Bolts
    INFI Blade Steel with Full Size Choil
    This is Brand New straight from the Busse Custom Shop! The MOAB is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    Busse Combat Custom Boss Jack Limited Edition #100 .18" Saber Ground Satin Blade w/Choil, Magnum Black G10 G-rexed CrossCut Mammoth Ivory Handle w/Solid Brass Bolts
    Boss Jack Limited Edition- BS
    6.2" Blade Length 11.2" Overall Length 1.25" Blade Width .18" Blade Thickness 11.25 Ounces
    Flat Saber Ground Hand Finished Satin Blade with a Blended Convexed Edge
    Custom Hand Smoothed/Shaped Magnum Black G10 G-rexed CrossCut Mammoth Ivory Handle w/Solid Brass Bolts
    INFI Blade Steel, Full Size Choil and Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This is Brand New straight from the Busse Custom Shop! The Boss Jack is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    Here is a Truly Beautiful set that you will Never see anther one of. This started off as a set from one of the largest Busse collectors. Both of these knives were new from the factory with a satin blade and Black G10 Handles. He loved them so much that he sent them both out to Chuck of Chuddybear Leather and had custom piggyback setup made for these two matching pairs. After a long wait and lots of money the sheath was made and was comfortably in his private collection. After a bit, I was offered this setup and I jumped at the chance. After taking possession of it, I wanted some make it better and since it was a very long time ago and the Busse Custom Shop was still open, I sent in the set to have new matching handles made. The original Chuddybear sheaths will be included but has not been sheathed since I got them back from the Custom Shop. These are from my personal collection for a very long time and are purely safe queens.

    Jerry Busse made his first prototype of the MOAB in 2003 but introduced this Monster of a Chopper in 2009 when he made only a few for a show and ganza. These Mother Of All Bowie were never a production knife that could be ordered from Busse Combat. There were a few different version of the MOAB made and this is one of the originals which has the .40" thick blade which is the most sought after. The Busse Custom Shop made this one by hand and hand picked and cut out and hand sanded/shaped this beautiful Black G10 G-rexed CrossCut Fossil Handle finished off with Solid Brass Bolts by hand. What's really rare about this knife is that the Busse Custom Shop stopped making the MOAB with the .40" and thicker steel about many years ago. I have not seen one this thick in a very long time. This one is my personal MOAB that I have had and is from my personal collection. The Blended Convexed Edge is Razor Sharp which is very scary with so much weight and size behind it! This has a INFI Steel that is .405" thick with a Flat Ground Satin Blade! This is one monster of a chopper, with this being so thick and long, this is one large and heavy Chopper!

    The Boss Jack was introduced by Jerry Busse in 2010 and have since been discontinued. I believe the Boss Jack is very similar to the Straight Hand Satin Jack that has long since been discontinued. The Boss Jack Limited Edition came with one option, with and without a choil. I started out with both #100 with and without choil. When this one came back to me, I only got this one with the choil. The Limited Editions all have the much sought after Flat Saber Ground Hand Finished Satin Blade. The Busse Custom Shop made this one by hand and hand picked and cut out and hand sanded/shaped this beautiful Black G10 G-rexed CrossCut Fossil Handle finished off with Solid Brass Bolts by hand. This knife has the the Blended Convexed Edge which is Razor Sharp. This one was made at the same time as the Custom MOAB so the handles were made to match every well as they were done from the same handle materials.
    Sold
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Rodent 4 Saber Ground .19" Red & Black Cerakoted Blade, Textured Canvas Micarta Handle (1 OF 6)
    Rodent 4 - R4
    4.5" Blade Length 9.9" Overall Length .19" Thick 8.21 Ounces
    Saber Ground Red & Black Cerakoted SR101 Blade with V-grind edge
    Textured Handle (underneath the coating can be either Canvas Micarta or G10)
    SR101 Blade Steel, Choil
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only Six made so this one is super rare and will never be done again! The Rodent 4 - R4 model has long since discontinued so get this now while you still can.

    This Swamp Rat Rodent 4 has a special Red & Black Cerakoted blade which has a .19" Blade thickness! The Cerakote coats not only the blade but the Magnum Canvas Micarta Handles and protects it. The handle material is either canvas micarta or G10 but is unknown because it is coated but either way, it also is covered with the lifetime warranty. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! This knife will carry a lifetime warranty from Swamp Rat Knives Works! This one is new and a RARE Super Find Because they only made 6 in this color combination. Brand New, Never Used, Carried or Sharpened!
    Sold
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame Large Bronze Warrior Skull Dragon Tail Money Clip
    2.25" Long X 1" Wide 35 grams
    This is one of the coolest accessories you can use to hold your money/cards and put in your pocket. This would go so well with your other Steel Flame accessories. So this is a Highly Detailed 3D Large Bronze Warrior Skull mounted on a money clip and is brought to you by Steel Flame. This is extremely rare because of the super low amount made. So on this clip is a 3D Large Bronze Warrior Skull mounted on a clip. The clip itself has a cutout which the Warrior Skull is partially covering and on the back is the Winged Dagger which is really cool. This is finished in their Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to dress up your cash Money and Credit Cards. Authentic Steel Flame 3D Large Bronze Warrior Skull. Ultra Rare and near impossible to find on the secondary market. Only serious collectors would appreciate the rarity of this piece. The Clip itself is only marked with the "Steel Flame" logo on the back so you know this is authentic. This will include the baggie, a paw sticker and black pouch. I won this directly from SF on FB in the lottery! This Brand New: never used or carried.
    Sold
     
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    KC236 Argonne Assault LB Tanker Grey Blade, Black G10
    Traded
     
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Short American Butaniku Sword .26" Saber Ground Black Crinkle Blade w/Fuller, Textured Black Paper Micarta Handle
    Short American Butaniku
    23.7" Blade Length 35.9" Overall Length 1.2" Blade Width .26" Blade Thickness 39.3 Ounces
    Flat Saber Ground Black Crinkle Blade with Fuller and V-Ground Edge
    Textured Black Paper Micarta Handle
    INFI Blade Steel, Full Size Choil, and Fuller (Blood Groove)
    This was Brand New purchased directly from the Busse Combat! The Short American Butaniku has been discontinued and can not be ordered from Busse so get this rare Grail Sword now!

    This Short American Butaniku Sword is a beautiful knife made by Busse Combat Custom Shop. This model was made because some people thought that the full size Butaniku was too long and heavy. So after much feedback from many people on the forums, the Busse Combat Custom Shop created this beauty. I think many would say that the weight and balance of this sword is much better now. The problem is that this was never a production Sword, only a few of these were ever made and only to shows and some online ganzas. This has a Black Crinkly coated Saber Ground Blade with a V-Ground Edge with a fuller (Blood Groove.) This particular knife was purchased by me directly from Busse Combat so nobody else has handles this except me. This has a Textured Black Paper Micarta Handle and who doesn't love a Black on Black knife? This is Brand New: never used, carried or sharpened.
    Sold
     
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Active Duty .16" Saber Ground Satin Blade, Full White Bone Handle w/Red Liners & Mosaic Pins
    Active Duty - AD
    3.6" Blade Length 7.85" Overall Length 1.1" Blade Width .16" Blade Thickness 5.8 Ounces
    Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Smooth Full White Bone Handle w/Red Liners & Mosaic Pins
    INFI Blade Steel with Small Choil
    This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta Ga. The Active Duty is no longer available for sale through the Busse Combat website because it's Sold Out, which probably means it had been Discontinued!

    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for Knife Shows. I purchased this Custom Shop knife directly from Busse Combat the 2016 Blade Show in Atlanta Ga. This has a INFI Steel that is .16" thick with a Satin Finish done by hand! The handle is Custom Hand Smooth Full White Bone Handle finished off with Red Liners & Mosaic Pins! This is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold
     
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    Steel Flame Triple Silver Hardness Skulls Money Clip

    This is one of the coolest accessories you can use to hold your money/cards and put in your pocket. This would go so well with your other Steel Flame accessories. So this is a Highly Detailed 3D Triple Silver Hardness Skulls mounted on a money clip and is brought to you by Steel Flame. This is extremely rare because of the super low amount made. So on this clip is a total of 3 Silver Hardness Skulls mounted on a clip. The clip itself has a cutout and you can see the Winged Dagger on the underneath which is really cool. This is finished in their Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to dress up your cash Money and Credit Cards. Authentic Steel Flame 3D Triple Silver Hardness Skulls. Ultra Rare and near impossible to find on the secondary market. Only serious collectors would appreciate the rarity of this piece. The Clip itself is only marked with the "Steel Flame" logo on the back so you know this is authentic. This listing is for ONLY the CLIP and DOES NOT INCLUDE ammo in the background. The clip you would actually get is of just the clip by itself along with a small zip baggie. This Brand New: never used or carried. Here is your chance to own a beautiful piece of Steel Flame History!
    Sold
     
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame 3D Bronze Warrior Skull Money Clip

    This is one of the coolest accessories you can use to hold your money/cards and put in your pocket. This would go so well with your other Steel Flame accessories. So this is a Highly Detailed 3D Bronze Warrior Skull mounted on a money clip and is brought to you by Steel Flame. This is extremely rare because of the super low amount made. So on this clip has a single 3 Dimensional Warrior Skull mounted on a clip. The clip itself has a cutout on the back is a Dagger with a Warrior Skull with fangs on it which is really cool. This is finished in their Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to dress up your cash Money and Credit Cards. Authentic Steel Flame 3D Bronze Warrior Skull Money Clip. Ultra Rare and near impossible to find on the secondary market. Only serious collectors would appreciate the rarity of this piece. The Clip itself is only marked with the "Steel Flame" logo on the back so you know this is authentic. The clip you would actually get is of just the clip by itself along with a small zip baggie. This Brand New: never used or carried. Here is your chance to own a beautiful piece of Steel Flame History!
    Traded
     
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Killa Zilla Test Team .28" Aged Bronze Cerakoted Convexed Blade, Textured Magnum Coated Handle (1 of 6)
    Killa Zilla Test Team - KZ TT
    12" Blade Length 18.5" Overall Length 2.25" Blade Width (widest point) .275" Blade Thickness 32.3 Ounces
    Convexed Aged Bronze Cerakoted Coated Blade w/V-Ground Edge
    Textured Magnum Coated Handle (underneath the coating can be either Canvas Micarta or G10)
    INFI Blade Steel with Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This was Brand New from the 2015 Blade Show in Atlanta Ga an Exclusive for ONLY this show! I believe there were only 6 made so this one is super rare and will never be done again!
    These Killa Zilla Test Team were introduced by Jerry Busse in 2010 and have long been discontinued. The very first ones were called Killa Zilla Test Team only available in satin and this one uses the same blank. The actual handle material is unknown can be either canvas micarta or G10, and because it is coated, is not known but will still have the lifetime guarantee. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This one is a custom made by the Busse Combat and the same blanks. This is Killa Zilla Test Team is one of the rare knives that Busse decided to make only Six of and have them Aged Bronze Cerakoted for this ONE Show! The Cerakote cover not only the blade but the Textured Magnum Coated Handle (underneath the coating can be either Canvas Micarta or G10) and protects it. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, you never know! This is supposed to looked old, aged and with faux corrosion and patina accents. The Blade steel is INFI which is a proprietary Steel is used only by Busse Combat knives. This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find Because they only made 6 in this color combination for the Blade show. Never Used, Carried or Sharpened!
    Sold
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    5,565
    104
    73
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat RMD Infidu .17" Saber Ground Satin INFI Blade, Textured Olive Drab Green G10 Handle
    Ratmandu - RMD
    5.25" Blade Length 10.3" Overall Length .17" Blade Thickness 10.3 Ounces
    Saber Ground Hand Finished Satin Blade w/Blended Convexed Edge
    Textured Olive Drab Green G10 Handle
    INFI Blade Steel with Full Size Choil
    This is Brand New directly from the 2014 Blade Show in Atlanta GA. The Infidu is no longer available for sale through the Swamp Rat Knife Company because it's Sold Out, and has been Discontinued!
    The Swamp Rat Knife Company decided to do something special for the 2014 Blade Show in in Atlanta GA so they made a few of these Ratmandu in a Hand Finished Satin INFI Blade just for the show. They only made a few in each color so get it before it's gone. There were only a few of these made by hand by the Custom Shop and I purchased this knife directly from the Swamp Rat Knife Company at that Show. This has a INFI Steel that is .17" thick with a Saber Ground Hand Finished Satin Blade w/Blended Convexed Edge which is Razor Sharp! The Satin Blade goes perfectly with the Textured Olive Drab Green G10 Handle. This is Brand New, never used, carried or sharpened.
    Sold
     

Share This Page