1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 11th Thread

Liu Kang Oct 7, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop MAX Warden .096" Saber Hollow Ground Satin ElMax Blade, Hand Smoothed Grape Vine in Resin w/Mosaic Pins & Red Liners
    MW - Max Warden (short for ElMax Warden)
    3.05" Blade Length 6.9" Overall Length 1" Blade Width .096" Blade Thickness 3.6 Ounces
    Saber Ground Hollow Ground Hand Finished Satin Blade with V-Grind Edge
    Custom Hand Smoothed Grape Vine in Resin w/Mosaic Pins & Red Liners
    ElMax Blade Steel, Small Choil
    This is Brand New directly from the 2017 Show Show in Atlanta GA. The Max Warden is no longer available for sale through Busse Combat because it's Sold Out, and has been Discontinued!
    The Game Warden was introduced by Jerry Busse in 2006 and has long been since discontinued. In 2014 Jerry Busse introduced the MAX Warden at the 2014 Blade Show where there were some with G10 handles available as offering where you had to catch the card to be able to purchase the knife. They were made in different flavors but very few were produced. These were modeled after the Game Warden but instead of INFI Blade Steel, these used ElMax Steel head treated the Busse way. These were also super thin and super sharp. And for the size of these, made the knife super light. This one is very special ones that were hand made though the Busse Custom Shop with a Gorgous Handle. This is Razor Sharp! This has a Saber Ground Hollow Ground Hand Finished Satin Blade with V-Grind Edge. The Custom Hand Smoothed Grape Vine in Resin finished off with Mosaic Pins & Red Liners. If you look carefully, you will see it is one set of Grape Vine Scale used to bolster a different set of Grapevine scales with clear red resin. This is truly one of a kind and you'll never see anything like it ever again! This is without a doubt a Grail Knife! This is Brand New, never used, carried or sharpened.
    Sold
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]Busse Combat NMSFNO .27" Muddy Brown Blade, Magnum Non-Textured Tigerhide Canvas Micarta Handle
    NMSFNO - Nuclear Meltdown Special Forces Natural Outlaw
    8.25" Blade Length 14.2" Overall Length 1.75" Blade Width .27" Blade Thickness 21.5 oz.
    Muddy Brown Coated Full Height Convexed Blade with V-Ground Edge
    Magnum Non-Textured Tigerhide Canvas Micarta Handle
    INFI Blade Steel with Full Size Choil, Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This knife is Brand New direcdtly from 2015 Blade Show in Atlanta Ga! The NMSFNO - Nuclear Meltdown Special Forces Natural Outlaw is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The NMSFNO was introduced in 2008 by Jerry Busse and have since than been discontinued. This is one of the most popular models that Busse has made and really in high demand by collectors. This is one of the two most voted as #1 choice of Busse knives if you can have only one Busse, so it says a lot. I purchased this knife directly from Busse Combat at the 2015 Blade Show. They must have found two or three blanks left over so they made these very special ones just for the show. This has a INFI Steel that is .27" thick with a Muddy Brown Coated Blade! What is so very special about this particular knife is the handle. This is the very first time I have seen Magnum Tigerhide with non-textured handles. It's hard to explain, it's not rounded like the hand shaped, it's sort of a flat cut so you can see the colors of the tigerhide much better. These do have small lines in them so they are textured but not like the ones that many Busse Collectors are used to. I think it's beautiful because it really brings out the color of the handle! The Convexed Ground Blade with V-grind Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Mick Strider Custom SCHLONG Nightmare Grind w/Hamon
    Specifications

    • Overall Length: 10.75 in
    • Blade Length: 5 in
    • Cutting Edge Length: 4 in
    • Blade Thickness: .190 in
    • Weight: 8.4 Ounces
    • Blade Material: Tool steel differentially heat treated
    • Handle Material: Titanium
    • Included: Padded zippered pouch w/patch

    What is a hamon anyway?: A hamon is the visual indication of the blade being differentially heat treated. Long ago before we had all the super steel alloys we have today, sword makers realized the harder they made the steel the better it performed when cutting. However, if it is too hard, it could become brittle as it cannot 'absorb' shocks. Thus the blades were differentially heat treated keeping the edge at a higher hardness level for cutting performance, and the spines 'softer' for durability. During heat treating, you would often see a difference in color for the different hardness levels.

    This is a true Grail for any Mick Strider knife collector. This exact knife was originally sold on Monday Edge and I got all the spec and description from there. You can still see the knife pictures there match mine as the Hamon matches mine exactly. This was purchased and than kept as a safe queen. This is an LX so be sure to look at the measurements because this is not a small folding knife. This has a very smooth opening action, solid early lockup with no rock lock and centered blade. This will come exactly as you would get it had you purchased it brand new. This has the black velcro pouch with the "and Killerman Sons" patch on it and it also has the original baggie with the stock number MSC0249-OV750 on it.
    Sold
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat BATAC .23" Flat Ground Black Crinkle Blade, Standard Textured Red Tequila G10 Handle
    Badger Attack Tactical - BATAC
    5.25" Blade Length 10.85" Overall Length 1.5" Blade Width .23" Blade Thickness 14.1 ounces
    Full Height Flat Ground Tanker Grey coated Blade with a V-ground Edge
    Standard Textured Red Tequila G10 Handle
    INFI Blade Steel, Skull Crusher and Full Size Choil
    This knife is Brand New directly from the Fall Knob Creek 2014 Show.
    The Badger Attack Tactical - BATAC is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!
    The Badger Attack Tactical BATAC was introduced in 2007 by Busse Combat and have since than been discontinued. This was a great model for a medium size knife. When this was introduced in 2007, there was the Combat Grade which had a coated blade and the thickness was about a .187" and the the Limited Edition and the Special Edition was released both of them had a full height ground with a blade a .27" thickness. So they wanted to so something very different for the Fall Knob Creek 2014 Show and went with a .24" Flat Ground Blade. For the handle, they chose to go with a Standard Textured Red Tequila G10 Handle. What a lot of people may not know is that this color handle has been Discontinued and is no longer being made. This exact knife was never produced in this thickness and so this is a Rare and Special one. This still has a V-grind Edge is Razor Sharp from the maker! This is Brand New, never used, carried or sharpened.
    Sold
     
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Rodent 4 R-4 .205" Saber Ground Black Blade, Textured Black Canvas Micarta Handle w/Savage Leather Sheath
    4.45" Blade Length 9.3" Overall Length .205" Thick 8.3 Ounces
    Saber Ground Black Crinkle Blade with V-grind edge
    Textured Black Canvas Micarta Handle
    SR101 Blade Steel
    The Swamp Rat Rodent 4 with a black blade and black canvas micarta handles! This listing will include a Black Savage Leather Sheath for storage and carry. This is in Brand, never used carried or sharpened. This knife will carry a lifetime warranty from Swamp Rat Knives Works! Brand New, Never Used, Carried or Sharpened!
    Sold
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Custom Shop Rodent Trails Variant .17" Flat Ground Satin Blade, Textured Black Paper Handle
    (1 of 6) from the Blade 2014 show!
    4.15" Blade Length 8.7" Overall Length .17" Blade Thickness 5.35 Ounces
    Flat Ground SR101 Hand Finished Blade Blade with a Fine V-Ground Edge
    Textured Black Paper Handle
    SR101 Blade Steel, Choil and Beveled Spine
    This was Brand New from the 2014 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only 6 made so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore.

    This was a very small production run which I believe this to be (1 of 6) that were available at the Blade 2014 show. This has a Flat Ground SR101 Hand Finished Blade Blade with a Fine V-Ground Edge. There is a bevel on the spine of the blade for better penatration. The Fine V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. This is the very first and only time Busse/Swamp Rat Knives Works has offeredvariant and may never do it again! This knife will carry a lifetime warranty from Swamp Rat Knives Works! This one is new and a Super Rare find because they only made 6 in this color combination! Never Used, Carried or Sharpened!
    Sold
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame Hardness Skull in Silver Pocket Clip for Rick Hinderer Knives
    43 grams
    This is one of the coolest accessories you can add to your Rick Hinderer knives including the XM18 or XM24. So there is the new Hardness Skull about the size of an XL put on a Rick Hinderer pocket clip and should fit his knives or tools. Highly Detailed Skulls done in Sliver on a Stainless Steel mount on a pocket clip to dress up your knife/tool and is brought to you by Steel Flame. This is extremely because of the super low amount made and probably the most rare and sought after of all the Steel Flame pocket clip. There were a few made just Rick Hinderer who posted it on his Facebook page for an online lottery. Finished in our Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity as I think Rick only has 7 winners to get one of these pocket clips. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to dress up your ultimate knife or tool. Here is your chance to own a beautiful piece of History!
    Sold
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Rick Hinderer Custom XM18 4th Gen 3.5" Harpoon Tanto Working Finish Flipper, Blue/Bronze Anodized Working Finish Frame, Black/Grey Textured G10
    3.5" Blade Length 8.2" Overall Length 1.1" Blade Width .165" Blade Thick 5.5 Ounces
    3.5" Hollow Hand Ground Working Finish Harpoon Tanto Flipper
    Black/Grey Textured G10 Scale
    Custom Hand Ground Working Finished Hollow Ground S35VN Blade
    Blue/Bronze Anodized Working Finish Titanium 6AL4V Titanium Lock Side & Liner
    Black DLC coated Pivot Screw, Handle Screws, Standoff, and Lockbar Stabilizer
    Blue/Bronze Anodized Working Finish Titanium Pocket Clip, Liner and Filler Tab
    4th Gen with the Blade Stop next to the Pivot.
    Rick Hinderer Custom Logo Laser Engraved on the blade.
    This is Brand New directly from the 2014 Plaza Cutlery Knife Show in Ca.

    Here is a Fresh New one from the 2014 Plaza Cutlery Knife Show in Ca lottery. Many went to the show just to get a chance to win this custom made knife. They went all out on this one with lots of custom little matching pieces that really is beautiful when all put together! This is beautiful and a full custom from a hand ground custom Hollow triple ground blade to this beautiful setup that matches the black DLC coated hardwear to the black in the Black/Grey G10 scale. This in this setup is a "One of a Kind" and there is not another one like it in this world! This thing has ultra smooth flipping action with a solid early lockup with a centered blade. This has a full working finish (Sand Blasted and than Stonewashed) on both the blade, handle and parts so that if you were to carry or use it, it's very hard to show any wear. This is exactly how it came directly from Rick Hinderer in this finish and options. The Titanium on this is more than one color and even more than two depending on the angle you are looking at this knife. This is exactly how it came directly from Rick Hinderer in this dual Anodized color combination. This has a nice strong detent so the blade with fly out when the blade is engaged. This will come with a Hinderer Box autographed by Rick Hinderer at the show, Zip lock baggie and tactical peanuts. This was never used, carried or sharpened! DEAD MINT!
    Sold
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat High Street .175" Flat Ground Satin Blade, Textured Blue/Black G10 Handle
    High Street - HS
    4" Blade Length 8.6" Overall Length 1.1" Blade Width .175" Blade Thickness 6.45 Ounces
    Full Height Flat Ground Hand finished Satin Bade with Fine V-Grind Edge
    Textured Blue/Black G10 Handle
    INFI Blade Steel, Small Choil
    This was purchased Pre-owned from a private collector! The High Street has been discontinued by Busse Combat and now no longer available to be ordered so get this before it's gone!

    The High Street were introduced by Jerry Busse in 2009 and have long been discontinued. And you guessed it, because it has the word "Street" in the name, it is based off the Meaner Street with about the same blade/overall length and the same handle. The rumor on these are that they are re-ground Mini Sus Scrofa which may be true since it would make sense. They would have had to chance the Hawk Bill blade shape into this Full Height Flat Ground Hand finished Satin Bade which has a trailing point and a slight re-curve to the blade. There is a bevel on the upper trailing point spine for better penetration. This one has a Textured Blue/Black G10 Handle version of them made. The blade thickness on this is about a .175" which still makes this into a nice slicer and is quite light at 6.45 ounces. This would make the perfect size blade and handle that would about fit all the everyday carry that anyone would need! This is an ULTRA rare one, as most collectors know there were not many produced and is highly sought after! This is a Grail Knife for any many Busse Collector. This has a fine V-Ground Edge that is super sharp. I believe this knife was sent out and has a custom Black Kydex sheath made for this exact knife. Because this is pre-owned and comes with a kydex sheath (which is included,) I am listing this knife as being used even though it may not have been. Because this is being listed as used, this is being sold "As is." You can see a lot about the condition of this knife from my highly detailed pictures.
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Busse Combat Tank Buster .25" Shark Face Black Cerakoted Saber Ground Blade, Magnum Textured Handle (1 of 3)
    6.25" Blade 11.85" Overall Length .255" Blade Thickness 17.69 Ounces
    Flat Saber Ground Cerakoted Blade with a V-Ground Edge
    Textured Handle, can be either Canvas Micarta or G10 underneath coating
    INFI Blade Steel
    The options on this Tank Buster is, with Swedge, Choil, Plain Edge, Magnum Handles with Skull Crusher!
    This was Brand New from the 2015 Blade Show in Atlanta Ga and an Exclusive for ONLY this show! I believe there were only 3 made so this one is super rare and will never be done again!

    For the 2015 Blade Show in Atlanta Ga, Busse did something a bit different and went with a very small amount of Special Edition knives with Cerakote. This Tank Buster has a Shark Face Black Cerakoted on Blade and handle. The Cerakote cover not only the blade but the Magnum Textured Handle and protects it. The handle material is either canvas micarta or G10 but is unknown because it is coated but either way, it also is covered with the lifetime warranty. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked worn/used. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives! There were only 3 of these made in this Shark Face Black Cerakoted combination across the Blade. This is Brand New: Never used, carried or sharpened.
    Sold
     
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame 3D Triple Bronze Hardness Skulls Pocket Clip for the to Torch/Flashlight

    This is one of the coolest accessories you can add to your Torch or Flashlight. So this is a Highly Detailed 3D Triple Bronze Hardness Skulls mounted on a pocket clip to dress up your Torch/Flashlight and is brought to you by Steel Flame. This is extremely rare because of the super low amount made. So on this clip is a total of 3 Bronze Hardness Skulls mounted on a pocket clip. This is finished in their Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to dress up your ultimate compact flashlight. Authentic Steel Flame 3D Triple Bronze Hardness Skulls. This Clip is made for the Torch/Flashlight is highly detailed. Ultra Rare and near impossible to find on the secondary market. Only serious collectors would appreciate the rarity of this piece. The Clip itself is only marked with the "Steel Flame" logo and "USA" on the back so you know this is authentic. This listing is for ONLY the CLIP and DOES NOT INCLUDE the Hanko Flashlight. This is Brand New and only mounted on the torch so you and picture this on your light and have an ideal of how it will look. This was never used and only mounted on this torch for pictures. This is for just the clip and does NOT have ha pouch or anything else included besides a little zip lock baggie. Here is your chance to own a beautiful piece of Steel Flame History!
    Sold
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,922
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat HOG Basic 8 .35" Full Height Flat Ground Satin Blade, Tan Resiprene C Handle
    Heavy Ordnance Grade (HOG) Basic 8 (B8) - HOGB8
    8.15" Blade Length 13.2" Overall Length 1.65" Blade Width .35" Blade Thickness 16.06 Ounces
    Full Height Flat Ground Hand Finished Blade with a V-Ground Edge
    Tan Resiprene C Handle
    INFI Blade Steel with a Full Size Choil
    This is Brand New directly from the Busse Combat. The Heavy Ordnance Grade (HOG) Basic 8 (B8) model has been discontinued so can no longer be order from the Busse Combat!
    The Basic 8 Limited Edition was introduced October of 2017 because of an thread that was started asking for one to be made and it was really long with over 10,500 posts. These sold out pretty fast and have already been discontinued. This knife came with three different blade finish which were, the hand applied Satin finish, BIG DC (Busse Industrial Grade Double Cut) and the standard Combat Grade (CG) coated blade. There were no options for the handle, all of them came with the standard Tan Resiprene C Handle. This is the same knife but it's coated so a tad bit thicker, and because of finishing the INFI blade to a satin finish, they coated the blade which in Busse terms is called Combat Grade and thus more affordable for those that would like to use it instead of collecting it. The Basic 8 LE in a thick .23" thick was only available in a Ganza and are already all sold out, this was only available at the Blade 2015 show and were sold out also! This is Brand New, never used, carried or sharpened.
    Sold
     

Share This Page