1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 11th Thread

Liu Kang Oct 7, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame 3D Pile of Warrior Skulls 5 skulls, 1 with red eyes (Vigilant) Pocket Clip for the to Torch/Flashlight

    This is one of the coolest accessories you can add to your Torch or Flashlight. So this is a Highly Detailed 3D Piles of Warrior Skulls 5 skulls mount on a pocket clip to dress up your Torch/Flashlight and is brought to you by Steel Flame. This is extremely rare because of the super low amount made. So on this clip is a total of 5 3D Warrior Skulls, and on one of the Skulls, they put in red eyes which is referred to as a Vigilant. This is finished in their Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to dress up your ultimate compact flashlight. Authentic Steel Flame 3D Pile of Skulls which consist of 5 Warrior Skull (No Jawbone) and one of them has Red Eyes. This Clip is made for the Torch/Flashlight is highly detailed. Ultra Rare and near impossible to find on the secondary market. Only serious collectors would appreciate the rarity of this piece. The Clip itself is only marked with the "Steel Flame" logo and "USA" on the back so you know this is authentic. This listing is for ONLY the CLIP and DOES NOT INCLUDE the Hanko Flashlight. This is Brand New and only mounted on the torch so you and picture this on your light and have an ideal of how it will look. This was never used and only mounted on this torch for pictures. This is for just the clip and does NOT have ha pouch or anything else included. Here is your chance to own a beautiful piece of Steel Flame History!
    Sold
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Hell Razor .196" Camouflage Coated Blade w/CBT's, Standard Textured Snakeskin Handle
    Hell Razor - HR
    6.8" Blade Length 12.5" Overall Length 1.7" Blade Width .2" Blade Thickness 16 Ounces
    Saber Ground Camouflage Coated Blade with V-Ground Edge
    Standard Textured Snakeskin Handle
    INFI Blade Steel, Full Size Choil, CBT's (Corrugated Bevel Technology), Swedge, Fuller (Blood Groove)
    This is Brand New purchased directly from Busse Combat. The Hell Razor Model has been discontinued so can no longer be order from the Busse Company Website! This is Brand New purchased directly from Busse Combat.

    Back in 2005 when the Hell Razor was introduced by Jerry Busse, all of the Hell Razor models came with the CBT (Corrugated Bevel Technology) except for the few Mud Razors that were produced. All of the Hell Razors Models have long since been discontinued even thought many people loved this model. I believe this is one of those original blades with the CBT's (Corrugated Bevel Technology), Swedge, Fuller (Blood Groove) and I think this was made about 2005-2006. I believe this is a custom for 2006 because they went all out with a custom Camouflage coated blade. For the handles, they went with the most expensive option which are the Snakeskin handles which were only available in standard thickness. This is a one of a kind and you'll never see another Hell Razor like this ever again. This is Brand New: never used, carried or sharpened.
    Sold
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Leatherman's Tan Leather Dangler Sheath with Snakeskin Insert for the Hell Razor
    Sold
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat BATAC .195" Flat Saber Ground Tanker Grey Blade, Standard Textured Snakeskin Micarta Handle
    Badger Attack Tactical - BATAC
    5.25" Blade Length 10.85" Overall Length 1.5" Blade Width .195" Blade Thickness 12.4 oz.
    Flat Saber Ground Tanker Grey Blade with a V-Ground Edge
    Standard Textured Snakeskin Micarta Handle
    INFI Blade Steel, Full Size Choil, Skull Crusher
    This knife is Brand New from a private collector that kept this as a safe queen. The Badger Attack Tactical - BATAC is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!
    The Badger Attack Tactical BATAC was introduced in 2007 by Busse Combat and have since than been discontinued. This was a great model for a medium size knife. When this was introduced in 2007, there was the Combat Grade which had a coated blade and the thickness was about a .187" and the the Limited Edition and the Special Edition was released both of them had a full height ground with a blade a .27" thickness. This is an original Combat Grade BATAC made in 2007 with a Flat Saber Ground Tanker Grey Coated Blade. For those that do not know, Busse has discontinued the Tanker Grey coating on their knives. Busse put a Standard Textured Snakeskin Micarta Handle which has also been discontinued. This still has a V-grind Edge is Razor Sharp from the maker! This is Brand New, never used, carried or sharpened.
    Sold
     
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Leatherman's Black Leather Sheath for the Busse BATAC
    Sold
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Rick Hinderer XM24 Hellfire Flipper w/Olive Drab Green G10 Scale & American Flag Etched/Anodized Ti
    3.8" Blade Length 9.2" Overall Length 1.2" Blade Width .184" Blade Thickness 7.3 Ounces
    Custom Hand Hollow Ground Working Finished Hellfire Blade with V-Ground Edge
    American Flag Etched/Bronze Anodized Working Finished Titanium Lock-Side Handle
    Black Cerakoted Pivot Screw Backspacer, Backspacer Screws, Stop Lock, Filler Tab & Pocket Clip
    Textured Olive Drab Green G10 Scale
    S35VN Blade Steel
    Rick Hinderer Logo etched on the blade.
    This is Brand New directly from the 2016 NYCKS in NJ.
    This is an Ultra Rare Custom hand ground knife by Rick Hinderer from the 2016 New York Custom Knife Show in NJ. For this show, he brought only 3 total customs, one Satin XM24 Hellfire, one Working Finish XM24 Hellfire and a beautiful XM24 custom Tanto. For those that doe not know about the Hellfire, this is the Holy Grail of Hinderer knives! There are very few ever made and they can only be won in lotteries. I know that in the XM24, the Hellfire Grind is Super Rare. The Hellfire Grind was never even a production blade style so here is one of your only chance at owning this super rare piece. Now to make this even more rare, this is a "One of a Kind" Custom Handle to match the custom Hand Ground blade!. This has a American Flag Etched/Bronze Anodized Working Finished Titanium Lock-Side Titanium Slab. Than to set it off even more is the super rare Cerakoted Black Cerakoted Pivot Screw Backspacer, Backspacer Screws, Stop Lock, Filler Tab & Pocket Clip. It may not seem like much but it's a lot of work and very hard to get it to make this knife in the color combination that you see here. This is the triple hollow ground blade that has made Rick Hinderer so famous. So if you have always wanted a really Special Hellfire this is your one and only chance at a One Off custom XM24! This has a Smooth opening action, Early Solid lockup with a centered blade. This has a nice strong detent so the blade with fly out when the blade is engaged. This is Brand New and kept as a safe queen. I would consider this in Dead Mint Condition but please look carefully at the pictures to judge for yourself! Included is the Hinderer box where he had the SKU with the mate, name of show and year that this knife was in the lottery. This has the latest Rick Hinderer custom logo on the blade. Most Rick Hinderer knife collectors know this well and know it's a real "Grail knife!" Here is your chance to own a beautiful piece of History! This is Brand New: Never used, carried or sharpened.
    Sold
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Knife Works Rodent 3 .175" Flat Ground Satin Blade, Clear Red Resin over Buffalo Horn Handle w/Mosaic Pins
    Rodent 3 - R3
    3.25" Blade Length 6.8" Overall Length 1.1" Blade Width .175" Blade Thickness 4.45 Ounces
    Flat Ground Satin Blade with a Fine V-Ground Edge
    Custom Hand Smoothed Clear Red Resin over Buffalo Horn Handle with Mosaic Pins
    SR101 Blade Steel with Full Size Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The Rodent 3 - R3 models knives have long since been discontinued and have been Sold out so get this now while you can!

    The Swamp Rat Knife Company decided to do something special 2017 Blade Show in Atlanta Ga so they made a few of these Rodent 3 with a satin blade and let the Custom Shop put some custom handles to really dress up these EDC. This uses the SR101 Blade steel which is NOT a stainless steel so there may be marks or different colors on the blade. This is being sold as such and is the exact way it came directly from Swamp Rat Knife Works Custom Shop. There were not many made and they all sold out fast. This has a SR101 Blade Steel that is .175" thick with a rare hand finished Satin SR101! This finish may show light machining marks. SR-101 is not a stainless steel so care should be taken to keep the blade clean and protected. This is Brand New, never used, carried or sharpened.
    Sold
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Varsity Edition BURP .225" Saber Ground Black Crinkle Re-Curve Blade w/CBTs, Textured Black G10 Handle
    Varsity Edition Busse Ultimate Retro Party - VE BURP
    7.5" Blade Length 13.15" Overall Length 1.65" Blade Width .225" Blade Thickness 16.35 Ounces
    Saber Ground Black Crinkle Coated Re-Curved Blade with a V-Ground Edge
    Textured Black G10 Handle
    INFI Blade Steel, Full Size Choil, BURP SPAT (Snack Pack Attack Tip), CBT (Corrugated Bevel Technology), Bottle Opener
    This is Brand New directly from Busse Combat purchased though "Operation Two Weeks!" The Busse Ultimate Retro Party - BURP was availible though "Operation Two Weeks!" from 8/2/17 through 8/5/17 and has been discontinued by Busse Combat!

    Sold
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Limited Edition Leatherman Charge Plus Carbon Fiber

    The Charge Plus Damascus models are limited edition masterpieces. Two versions have been created, the first with refined blue PVD coating and carbon fiber handles. The second is constructed with walnut-finished wood handles and gold PVD coating accents. I believe this is the prototype of the Carbon Fiber one. Pretty much this is the same one as the Limited Edition one with the Damascus Blade but this one does NOT have the Damascus blade. This was one with 154cm and I think has a black PVD coating. This one does NOT have a leather sheath but instead has a Black nylon sheath. This was was donated by Leatherman company for a charity auction. This will not come with box and paperwork and this is why I listed this as used. This will come with a black nylon Leatherman sheath as you see in the picture as it is the one Leatherman provided to go with the auction. I have not used this but it may have been a working prototype. You will get what you see in the pictures and that's it. This will carry the Leatherman warranty. I have never seen another one like this one so here is your chance at a super limited Prototype. I think this looks very dark and stealth having a black sheath, with the Black Carbon Fiber and Black PVD coating. Besides the one reversible bit, there are no others included. Here are the specs:

    TOOLS
    154cm Stainless Steel Knife
    154cm Stainless Steel Serrated Knife
    Needlenose Pliers
    Regular Pliers
    Premium Replaceable Wire Cutters
    Premium Replaceable Hard-wire Cutters
    Electrical Crimper
    Wire Stripper
    Saw
    Spring-action Scissors
    Cutting Hook
    Ruler (8 in | 19 cm)
    Can Opener
    Bottle Opener
    Wood/Metal File
    Diamond-coated File
    Large Bit Driver
    Small Bit Driver
    Medium Screwdriver

    FEATURES
    All Locking Features
    Lanyard Ring
    Replaceable Pocket Clip & Quick-release Lanyard Ring
    Outside-accessible Features
    One-hand Operable Features

    SPECS
    Primary Blade Length: 2.9 in | 7.37 cm
    Closed Length: 4 in | 10 cm
    Weight: 7.9 oz | 225 g
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop SFNO .24" Saber Ground Satin Blade, Black G10 G-rexed Spalted Maple Handle w/Mosaic Pins
    Special Forces Natural Outlaw - SFNO
    7" Blade Length 12.85" Overall Length 1.85" Blade Width .24" Blade Thickness 20.3 Ounces
    Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Black G10 G-rexed Spalted Maple Handle w/Mosaic Pins
    INFI Blade Steel, with Large Choil
    This was Brand New from the 2015 Fall Knob Creek Show in KY and this is a "ONE of a KIND!" The Busse Special Forces Natural Outlaw - SFNO is no longer being made and has been discontinued so get this while you still can since it can't be ordered.
    The SFNO (Special Forces Natural Outlaw) was introduced by Jerry Busse in 2004 and has long been since discontinued. This has one of the new thicker Satin blades! The Busse Combat Custom Shop really did a beautiful job on this Custom Black G10 G-rexed Spalted Maple Handle finished off with Mosaic Pins. There was a rumor before that there existed the Fat SFNO that was a coated blade at .27" Thick and your normal SFNO either coated or satin were all .22" thick so this one is special because it's thinker than your normal standard SFNO! This V-Ground Edge is Razor Sharp. This is Brand New: never used, carried or sharpened!
    Sold
     
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop SWATmandu .175" Flat Saber Ground Satin Blade, Hand Smoothed Blue/Black G10 G-rexed Stacked Bones Handle w/Mosaic Pins
    5.25" Blade Length 10.4" Overall Length 1.35" Blade Width .175" Blade Thickness 11.7 Ounces
    Flat Saber Ground Hand Finished Satin Blade w/Fuller (Blood Groove) with a V-Ground Edge
    Custom Hand Smoothed Blue/Black G10 G-rexed Stacked Bones Handle w/Mosaic Pins
    INFI Blade Steel with Full Size Choil
    This was Brand New from straight from the Busse Combat Custom Shop! The Nuclear Meltdown Fusion Steel Heart is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    I believe the SWATmandu is based of the Ratmandu or InfiManDu. The difference between the InfiManDu and the SWATmandu is that the InfiManDu is made through Swamp Rats Knife Company and the SWATmandu is made by the Busse Combat Knife company and it has a Fuller (Blood Groove) and a talon hole. Both pretty much have the same blade thickness and the same shape with the Flat Saber Grind and both use the INFI Blade Steel! Here is a Super Rare knife which is a Full Blown Custom SWATmandu with a satin blade finish with a full custom handle. I would say less than a handful of this model with a satin blade and custom handle exist in the world.
    This has the Flat Saber Ground Hand Finished Satin Blade w/Fuller (Blood Groove) with a Fine V-Ground Edge. This has a INFI Steel that is .175" thick with a Hand Finished Satin Blade! This also has the Fuller or Blood Groove on the blade! The Handles start with a set of Hand Smoothed Blue/Black G10, then cut out and matched set of Stacked Bones set in Blue Amber like resin with Black Liners Handle are finished off with Mosaic Pins! You can tell a lot of thought, planning, and work went into the making of this knife! This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used ONLY by Busse Combat. This knife will carry a lifetime warranty from Busse Combat! Here is your chance to own a beautiful piece of History! This is Brand New: never used, carried or sharpened.
    Sold
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Ernest Emerson Bushman/CQC-16 Bowie with Serrations w/Wave, Ti Bolstered with Green Canvas 2013 Blade Show Emerson Lottery
    Blade Length: 3.65″
    Overall Length: 8.85"
    Blade Width (widest part) : 1.3"
    Blade Thickness: .125"
    Hardness 57-59 RC
    Blade Steel: CPM 154-CM
    Bolster/Liners/Back Spacers: Aerospace Grade Titanium
    Weight: 6.65 Ounces.

    This is a Custom Ernest Emerson Bushman/CQC-16 Bowie with Serrations that comes with a black velvet pouch so I believe this is from the 2013 Blade show lottery. This is preowned and shows light signs of use and wear. Sold as is.
    Sold
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Comparison picture to an Emerson Custom Uber Commander
    [​IMG]
    Ernest Emerson Custom Jupiter Commander w/Wave Feature SpecWar Logo!
    Blade Length: 5″
    Overall Length: 11.75"
    Blade Thickness: .125"
    Hardness 57-59 RC
    Blade Steel: CPM 154-CM
    Weight: 11.91 Ounces

    This one is Brand New directly from the Emerson lottery at the Blade 2012 Show! So big that there is no box that will fit so it will come with the bag and everything else given to the winner at the Blade show which was me. This has the factory Warranty/Registration card and Emerson sticker. This has the much sought after original This has the the older Specwar logo on the vs. the newer blade marked "Hand Made" along with their logo skull. This has a Beadblasted Titanium Bolsters with Titanium liners and Green Canvas Micarta Scales. Emerson Knives are one of the most sought after by all the Collectors from around the world and in the military and this model is so rare which makes it a real "Grail Knife!" I believe this is the largest folding knife that Ernest Emerson has ever made. I have only ever seen 3 ever so this would be (1 of 3.) This was hand ground and hand made by Ernie Emerson himself. I blieve there are a total of five different sizes of the custom Commander and this is the largest one! This has a Saber Ground Blade with a V-Ground Edge made from CPM154. This one has the wave feature which has made Emerson Knives they company they are today. This is also a more current model so this has the thicker Titanium Liners as you can see in the pictures. Smooth opening action, with a centered blade, solid early lockup, and original edge. Here is your own chance to own a piece of Emerson History. This was kept in a safe and still Brand New; never used, carried or sharpened and will come with the original and baggie and Warranty Card. The last picture is a comparison picture next to the Uber Commander (second largest Emerson Commander,) which I also am selling.
    Sold
     
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat ASHBM .33" Flat Ground Black Blade w/Choil, Magnum Textured Red/Black G10 Handle
    ASHBM - Anniversary Straight Handle Battle Mistress
    11.15" Blade Length 1.8" Blade Width 16.35" Overall Length .335" Thick 27.5 Ounces
    Full Height Flat Ground Ground Black Coated Blade w/V-Grind Edge
    Magnum Textured Red/Black G10 Handle
    Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    INFI Blade Steel, Large Choil,
    The Anniversary Straight Handle Battle Mistress has been discontinued by Busse Combat and now now long available and can no longer be ordered so get this before it's gone!

    In 2013 Jerry Busse introduced the Anniversary Straight Handle Battle Mistress to the Busse community on his forums. This has been a very popular model and has become discontinued. I believe this took the most of the Heavy Duty chopping duties of the FFBM and NMFBM. I purchased this knife directly from Busse Combat. This has a INFI Steel that is .33" thick with a Black Coated Finish! This particular knife seem to be thicker than the rest! The V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold
     
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Short American Butaniku Sword .255" Saber Ground Black/Grey/White Cerakoted w/Fuller, Textured Handle
    Short American Butaniku
    23.7" Blade Length 35.90" Overall Length 1.2" Blade Width .255" Blade Thickness 40.5 Ounces
    Flat Saber Ground Black/Grey/White Cerakoted Blade with Fuller and V-Ground Edge
    Textured Canvas Micarta or G10 Handle with Cerakote Coating
    INFI Blade Steel, Full Size Choil, and Fuller (Blood Groove)
    This was Brand New purchased directly from the 2015 Blade Show in Atlanta Ga an Exclusive for ONLY this show! I believe there was only one of these made so was not in the offering but on the table to be purchased! The Short American Butaniku has been discontinued and can not be ordered from Busse so get this rare Grail Sword now!

    This Short American Butaniku Sword is a beautiful knife made by Busse Combat Custom Shop. This model was made because some people thought that the full size Butaniku was too long and heavy. So after much feedback from many people on the forums, the Busse Combat Custom Shop created this beauty. I think many would say that the weight and balance of this sword is much better now. The problem is that this was never a production Sword, only a few of these were ever made and only to shows and some online ganzas. This Saber Ground Blade with a V-Ground Edge with a fuller (Blood Groove.) This particular knife was purchased by me directly from Busse Combat at the Blade 2015 Show. There were only one of these made in this with the Black/Grey/White Cerakoted combination. The Cerakote cover not only the blade but the Handles and protects it. Because the actual handle is covered, you can not see what the handle material is and will either be G10 or Canvas Micarta. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked used or dirty but it's supposed to look that way with this cerakote coating. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives! This one is new and a RARE Super Find as only 1 was ever made that I know of! This is Brand New: never used, carried or sharpened.
    Sold
     
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Scrap Yard Knife Company SYKCO Alpha Dog 6 .22" Flat Saber Ground Satin Blade w/Swedge, Black Resiprene C
    Dog Soldier 6
    6.3" Blade Length 11.35" Overall Length 1.55" Blade Width .22" Blade Thickness 10.6 Ounces
    High Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Black Resiprene C Handle
    INFI Blade Steel, Full Size Choil, Swedge
    This was Brand New purchased directly from Busse Combat! This Alpha Dog 6 Model in any of the three finishes has been discontinued and never done again.

    The Scrap Yard Knife Company Alpha Dog 6 was just introduced by Jerry Busse for the May of 2019 and already has been discontinued. This model was available in three different finishes, the coated version, BIG DC version and this Hand applied Satin version.

    The long top grind not only aids in penetration but allows for a faster and lighter blade while leaving a substantial flat along the spine for batoning.

    This knife has a High Saber Ground Hand Finished Satin Blade with V-Ground Edge. This has a Black Resiprene C Handle which is a softer handle for better more comfortable handle that's similar to a rubber handle and will absorb the impact when using the knife. This model was very limited in number and was only available in the one online offering and are already all sold out! Many people order this knife and few were able to score one. This is Brand New, never used, carried or sharpened.
    Sold
     
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CSAK475 Busse Combat Custom Shop AK47 .179" Convexed Satin Blade, Black G10 G-rexed Blue/Brown Curly Oak Handle w/Mosaic Pins
    American Kenzi 47 - AK47
    18.25" Blade Length 28.75" Overall Length 1.3" Blade Width .179" Blade Thickness 28.7 Ounces
    Full Height Convexed Satin Blade with V-Ground Edge
    Custom Hand Smooth Black G10 G-rexed Blue/Brown Curly Oak Handle w/Mosaic Pins
    INFI Blade Steel with Choil
    This is Brand New purchased directly from Busse Combat. The Busse AK47 has long been discontinued and is no longer being made so get this while you can!
    The Busse Combat AK47 was first introduced by Jerry Busse in 2005 and back than it was with a coated blade. There were very few made with this Convexed Satin Blade for the shows and Ganza that Busse did. But these Busse AK47 have been discontinued and really sought after but the collectors especially the satin blades. These are nice short swords with a nice thin blade for slicing with a full handle that can be handled with both hands for an average person. As you can see, this one is highly modified and has a hand satin finished Blade. The Busse Custom Shop went all out on this custom handle. You can see a lot of thought and work went into this one! This one has a Custom Hand Smooth Black G10 G-rexed Blue/Brown Curly Oak Handle finished off with Mosaic Pins. This is a one of a kind and you will never see another one like this again. This one is Brand New, never used, carried or sharpened. There are not many of these around for sale and are rare when in Mint Condition. The V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold
     
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    KC308 Busse Combat Custom Shop Pork Shank .15" Saber Ground Satin Blade, Stripe Maple Wood Handle w/Mosaic Pins
    Pork Shank - PS
    5" Blade Length 9.9" Overall Length .95" Blade Width .15" Thick 6.6 Ounces
    Flat Saber Ground Hand Finished Satin Blade with a Blended Convexed Edge
    Custom Hand Smoothed Full Stripe Maple Wood Handle w/Mosaic Pins
    INFI Blade Steel with Choil
    This is from the Fall 2012 Knob Creek Show.
    This is Brand New purchased directly from Busse Combat at the 2012 Fall Knob Creek Show in KY. The Pork Shank has long been discontinued and is no longer being made so get this while you can!

    The Pork Shank was introduced in June of 2012 by Jerry Busse and this is what he said: "The long handle and generous choil will make this an ideal Day Hiker or hunting knife." That pretty much says it all! This has an overall length of just under 10 inches with a 5" Blade, and with the blade with just under an inch, this is a slim knife to have on you for everyday or camping. This has have since than been discontinued and not all that many around anymore. The production run was not very long and so not all that many produced. They save a few blanks for the 2012 Fall Knob Creek Show. The blanks were given to the Busse Custom Shop to make a few very special customs for those higher end collectors that wanted something special. So the Busse Custom Shop went all out and got a beautiful match set of Stripe Maple and did a hand smoothing to make this perfect for this knife. They finished it off and attached it with Mosaic Pins. The Blended Convexed Edge is Razor Sharp! This particular one was purchased at the Knob Creek Show on 10/11/12. These were never made as a production with these Birdseye Maple Wood Handle w/Mosaic Pins and each one is hand custom made by the Busse Custom shop. Dead Mint never used, carried or sharpened.
    Sold
     
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Saw CG .25" Flat Ground Muddy Brown Blade w/CBT, Textured Black G10 Handle
    Battle Saw Combat Grade - BSCG
    11.1" Blade Length 16.5" Overall Length 2" Blade Width .255" Blade Thickness 25.8 Ounces
    Flat Ground Blade with CBT (Patented Corrugated Bevel Technology) and V-Ground Edge
    Textured Black G10 Handle
    INFI Blade Steel, Large Choil
    This is Brand New and part of the "Operation 2 Weeks" which started October 14, 2015 and ended October 20, 2015. They have stopped producing this model so get this while you still can.This was part of the "Operation 2 Weeks" which started October 14, 2015 and ended October 20, 2015

    The Battle Saw was inspired by a saw tooth monster Jerry Busse made back in the early 80's and is built on the foundation of the legendary Straight Handled Battle Mistress. Jerry Busse tried to have this for Blade 2015 but was not ready in time so decided to introduce this as part of the "Operation 2 Weeks" which started October 14, 2015 and ended October 20, 2015. So this was a very short run and there were not that many made. The only option was the color of the coating and handle material options. The V-Ground Edge on this knife is Razor Sharp! The Black/Tan G10 handles you see on this knife cost an additional $65 as an option. INFI is a proprietary Steel is used by Busse Combat knives and is Legendary! This knife will carry a lifetime warranty from Busse Combat! This one is was purchased by me directly from Busse Combat as part of the "Operation 2 Weeks." Brand New, Never Used, Carried or Sharpened!
    Sold
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,972
    94
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Fellhoelter/Kelly Confluence Collaboration Stellite Core Damascus Wharncliffe Blade, Zirconium/Titanium Frame
    Makers: Brian Fellhoelter & Steven Kelly
    Blade Length: 3.2"
    Overall Length: 7.65"
    Blade Thickness: .155"
    Blade Finish: Zirwash
    Handle: Full Hand Rubbed Zirconium Display Side, Bead Blasted Titanium Lock Side
    Blade Steel: Stellite Core Damascus
    Weight: 5.3 Ounces
    Pocket Clip: 3-D Compound-Milled Tip-up Hand Rubbed Zirconium Pocket Clip
    Bronze Anodized Titanium Pivot Hardware, Barbell Back Spacers, Thumb-Disk, & Hardware

    This was Brand New directly from the 2017 Blade Show in Atlanta Ga! This was a collaboration between two knives makers, Brian Fellhoelter & Steven Kelly. There were a few of these Confluence customs brought to the show and they were all completely different and "One of a Kind!" These were for the lottery only and I won the lottery and was able to pick from a few different ones. This was the only one that really stood out, it was the only Full Dressed one I saw with a Saber Ground Stellite Core Damascus Wharncliffe Blade with a swedge. The handle was a Full Hand Rubbed Zirconium Display Side with a matching pocket clip. This has a Bead Blasted Titanium Lock Side and everything is finished off with Bronze Anodized Titanium Pivot Hardware, Barbell Back Spacers, Thumb-Disk, & Hardware. You can tell by looking at this knife that a lot of thought, planning, and work went into this knife. This is Brand New; never used, carried or sharpened and will come with the custom pouch and dog tag. Smooth opening action, with a centered blade, solid early lockup, and original edge. Here is your chance to own a beautiful piece of History!
    Sold
     

Share This Page