1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 11th Thread

Liu Kang Oct 7, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Gladius .275" Convexed Satin Blade, Hand Smoothed Black G10 Handle
    Gladius
    15.05" Blade Length 23.15" Overall Length 1.75" Blade Width .275" Blade Thickness 38.4 Ounces
    Double Edged Convexed Hand Finished Satin Blade with Zero Edge with a Doublecut Fuller
    Hand Smoothed Black G10 Handle
    INFI Blade Steel, Fuller (Blood Groove)
    This is Brand New just received back directly from Busse Combat Custom Shop. These "Gladius" sword models are discontinued and have been Sold out since 2010!

    This was introduced by Jerry Busse in the summer of 2010 and has long since been discontinued! This was a very Limited Production Run Busse by the Combat Custom Shop that you could pre-order them at the 2010 Blade Show and than a online Ganza that followed but that was it. This has a Double Edged Convexed Satin Blade with Zero Edge is Razor Sharp all hand finished to a satin Blade with a Doublecut Fuller down the middle! This one has been made with the Hand Smoothed Black G10 Handle. These beautiful sword is a MUST have for any Busse collector and lots of times is their ultimate "Holy Grail!" I purchased this directly from Busse Combat! This has a INFI Steel that is .30" thick with a Beautiful Satin Finish! This still has the original Full Height Convexed edge that is razor sharp! This one is brand new, never used, carried or sharpened.
    Sold
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Rassenti Knives Integral Wharncliffe TAD Edition, OD Green (TAD Drawing #98 3/24/14)
    Blade: S35V with Hand-Rubbed Satin Finish
    Handle: 6AL-4V Titanium with OD Green G10 Inlays.
    Pocket Clip: Low Profile 6AL-4V Titanium
    Hardware: Stainless Torx Screws
    Dimensions
    Blade Length: 3.625" (9.37 cm)
    Blade Thickness: 0.18" (0.46 cm)
    Handle Length: 4.5” (11.94 cm)
    Handle Thickness: 0.14” (0.36 cm)
    Overall Length: 8.13" (20.65 cm)
    Weight: 5.13 oz (145.3 g)

    Features
    Blade Type: Wharncliffe
    GTC Bearing System
    Milled From 0.5” Titanium Slab
    Tip-Up Carry
    Oversized Spyderhole
    G10 Inlays on Front and Back of Handle
    Color: OD Green or Black
    Hand Sculpted, Low Profile Titanium Pocket Clip

    Okay so here is a blast from the past. This knife was custom made by Peter Rassenti for Triple Aught Design in the TAD Drawing #98 held on 3/24/14. I believe there was only one of these knives made and this is it. Triple Aught Design no longer does the lotteries anymore.
    The integral handle is Stonewashed 6AL-4V Titanium with OD Green G10 Inlays. This has a titanium clip positioned for tip up carry. Very smooth action, blade is centered and has no play whatsoever when opened. Nice detent, lockup and blade seating. New in Box. Never used, carried or sharpened. A lot of work, time and creativity went into making this knife. This is truly a piece of art!
    Sold
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    Busse Combat Custom Shop Old School Custom Integral Dagger BOSC ID .395" Satin Double Convexed Edged Blade, Hand Smooth Black G10 G-rexed Meteorite Handle
    Boss Old School Custom Integral Dagger - BOSC ID
    4.2" Blade 9.3" Overall .16" Blade Thickness 1.1" Blade Width .395" Thick Bolsters 8.5 Ounces
    Double Edged Convexed Hand Finished Satin Blade w/Blood Groove (Fuller) with a Convexed Edge
    Custom Hand Smooth Black G10 G-rexed Meteorite Handle
    INFI Blade Steel, Small Choil
    Sold
     

    Attached Files:

  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Son of Swat .16" Saber Ground Satin Blade, Hand Smooth Brown Canvas Micarta G-rexed Maple Wood Handle w/German Nickle Silver Tubes
    SOS - Son of Swat
    4.35" Blade Length 9.2" Overall Length 1.1" Blade Width .16" Blade Thickness 7.3 Ounces
    Flat Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smooth Brown Canvas Micarta G-rexed Maple Wood Handle w/German Nickle Silver Tubes Filled with Clear Orange Resin
    INFI Blade Steel, Small Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The Son of Swat has been discontinued by Busse Combat and now now long available and can no longer be ordered so get this before it's gone!
    The Son of Swat was introduced by Garth Reckner in April of 2016 and has since been discontinued. This is one of the models available in the "Operation Two Weeks!" Here is what he said about this knife:
    SWAT Snipers, whose team members carry the SwatManDu, requested the same level of performance in a much lighter, narrower, and compact package due the special conditions they face.
    This request was answered with the Son Of Swat (SOS)

    This one is a Full Blown Custom was made by the Busse Custom Shop just for the 2017 Blade Show! This started with a .16" thick Flat Saber Ground Hand Finished Satin Blade and Finished it off with a V-Ground Edge which is Razor Sharp! The Busse Custom Shop really outdid themselves with the Custom Hand Smooth Brown Canvas Micarta G-rexed Maple Wood Handle finished off with German Nickle Silver Tubes Filled with Clear Orange Resin. It's details in the little things like if you look closely at the German Nickle Silver Tubes you will see it is filled with Resin that's clear and if you hold up to the light, you can see light pass through it. If you look towards the butt of the handle, you will see they put cut two lines out forming a "T" and filing it in with clear yellow resin. This is very unique handle. You will never see another even close to this beauty. You can tell a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! This is Brand New, never used, carried or sharpened.
    Sold
     
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Cultellus .13" Flat Ground Satin Blade, Hand Smoothed Snakeskin Micarta Handle
    Cultellus - Culti
    3.35" Blade Length 7.95" Overall Length .8" Blade Width .13" Blade Thickness 3.7 Ounces
    Flat Ground Hand Finished Satin Blade with a Very Fine V-Ground Edge
    Hand Smoothed Snakeskin Micarta Handle
    INFI Blade Steel with Small Choil, Busse Custom Shop Logo
    This is Brand New directly from a private collector's safe! The Cultellus are sold out and have been discontinued so get this beautiful custom while you still can!
    Jerry Busse introduced the Cultellus in December of 2007 and it has long been discontinued. This is from a private collection that was a safe queen and is still dead mint condition! This has a INFI Steel that is .13" thick, Full Height Flat Ground with a razor sharp thin fine V-Ground Edge! This is an ULTRA rare one, as most collectors know there were not many produced and is highly sought after! I believe this was made around 2008 and less than 10 of these were made using the very last of the snakeskin handle material. What makes this one super rare is that it is still in new condition but all Busse collectors know that the snakeskin handles are the grail of most collectors. It has been said that the very last of the snakeskin handle were used on these few Cultellus. They have tried many times to replicate the snakeskin handles and it has not even been close. There are many collectors always on the lookout for snakeskin Busse knives. This was a very few of these made by Busse Combat Custom Shop when this came out. This is one of the most sought after Busse knives and should be in my own personal collection. This has a Custom Hand Smoothed Snakeskin Micarta Handle. The Cultellus is one of the thinnest blades you will get in INFI steel from Busse Combat, this is a real sweet slicer. This knife was not a production and will never be made again so get this while you still can!This is Brand New, never used, carried or sharpened.
    Sold
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    Busse Combat Custom Shop Cultellus .128" Flat Ground Satin Blade, Hand Smoothed/Shaped Snakeskin Micarta Handle
    Cultellus - Culti
    3.4" Blade Length 7.95" Overall Length .8" Blade Width .128" Blade Thickness 3.7 Ounces
    Flat Ground Hand Finished Satin Blade with Fine V-Ground Edge
    Custom Hand Smoothed/Shaped Snakeskin Micarta Handle
    INFI Blade Steel with Small Choil
    This is Brand New from a person knife collection where it was kept as a Safe Queen! The Cultellus are sold out and have been discontinued so get this beautiful custom while you still can!

    Jerry Busse introduced the Cultellus in December of 2007 and it has long been discontinued. I purchased this knife directly from private collection and this is still dead mint! This has a INFI Steel that is .128" thick with a razor sharp V-Ground Edge! This is a very special and only a handful made! This has a Flat Ground Hand Finished Satin Blade with very fine V-Ground Edge. This has a Custom Hand Smoothed/Shaped Snakeskin Micarta Handle. The Cultellus is one of the thinnest blades you will get in INFI steel from Busse Combat, this is a real sweet slicer. This knife was not a production and will never be made again so get this while you still can! This knife was not a production and will never be made again so get this while you still can! This is Brand New, never used, carried or sharpened.
    Sold
     

    Attached Files:

  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop NMFBM .277" Convexed Satin Blade, Hand Smoothed Yellow/Black G10 G-rexed Brown/Tan Lacewood Handle w/Mosaic Pins & Yellow Liners
    NMFBM - Nuclear Meltdown Fusion Battle Mistress
    11.3" Blade Length 17.65" Overall Length 2.1" Blade Width .277" Blade Thickness 33.8 Ounces
    Hand Finished Satin Full Height Convexed Blade with V-Ground Edge
    Custom Hand Shaped Yellow/Black G10 G-rexed Brown/Tan Lacewood Handle w/Mosaic Pins & Yellow Liners
    INFI Blade Steel, Full Choil, Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta Ga. The NMFBM has long been discontinued and is no longer being made so get this while you can!

    This knife was introduced in 2008 by Jerry Busse from the Busse Combat and has long since been discontinued. This is a "One of a Kind" and you will never see another like it! What's Special about this knife is that normal production NMFBM all had coated blades that were .25" Thick and the Limited Editions were all .27"-.28" thick so this one used one of the Limited Edition blanks that was left over from 2008! This one is a satin one in a .277" thick which is very gives this knife a nice weight and balance for a chopper. These one has custom Hand Smooth Yellow/Black G10 G-rexed Brown/Tan Lacewood Handle & finished off with Mosaic Pins & Yellow Liners. This is one of the Grail Knives of the Busse World! This has V-Ground Edge that is razor sharp! This is made of the infamous INFI Steel which is a proprietary Steel is used ONLY by Busse Combat! This is Brand New, never used, carried or sharpened!
    Sold
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Basic 8 CG .25" Desert Sage Flat Ground Blade, Black Resiprene C Handle
    Basic 8 CG - Basic 8 Combat Grade
    8.15" Blade Length 13.15" Overall Length .25" Blade Thickness 13.035 Ounces
    Flat Ground Desert Sage Blade with a V-Ground Edge
    Black Resiprene C Handle
    INFI Blade Steel with a Full Size Choil
    This is Brand New from the 2015 Blade Show in Atlanta Ga. The Basic 8 model has been discontinued so can no longer be order from the Busse Combat!

    The Basic 8 Limited Edition was just introduced and already has been discontinued. This is the same knife but it's coated so a tad bit thicker, and because of finishing the INFI blade to a satin finish, they coated the blade which in Busse terms is called Combat Grade and thus more affordable for those that would like to use it instead of collecting it. The Basic 8 LE in a thick .23" thick was only available in a Ganza and are already all sold out, this was only available at the Blade 2015 show and were sold out also! This is Brand New, never used, carried or sharpened.
    Sold
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat FFBM .31" Saber Ground Black Crinkle coated Blade, Textured Magnum Black G10 Handle
    FFBM - Fat Fusion Battle Mistress
    10" Blade Length 16.25" Overall Length 2.1" Blade Width .32" Blade Thickness 33.5 Ounces
    Black Crinkle Coated Saber Ground Blade with V-Ground Edge
    Textured Magnum Black G10 Handle
    INFI Blade Steel, Full Size Choil
    This is like in Brand New from a Private Collection that was kept as a "Safe Quee!"These FFBM - Fat Fusion Battle Mistress are discontinued and have been Sold out so get this now while you can!
    The Combat Grade Fusion Battle Mistress was introduced by Jerry Busse in 2006 and has long been since discontinued. At that time, the FFBM was sold in certain specific color combinations only and only through the Busse Company Store! I believe this is the knife that really got Busse to where it is today. I believe this one was released in 2007. Noss decided to test this knife on knifetest.com and the results were incredible and since than, everyone from around the world has wanted to own a FFBM! This knife has the Saber Ground Black Crinkle coated INFI Blade with the V-Ground Edge! This has the Textured Magnum Black G10 Handle which is great for strength and Durability for the material and performs will with great grip and non slip use. This one is new and a RARE and a "MUST Have" for any Busse Collector! There are not many of these around for sale and are rare when in Mint Condition. This is Brand New: Never Used, Carried or Sharpened!
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Patriot Bunker Buster .225" Saber Ground Red/White/Blue Flag Cerakote Blade, Textured Handle
    Battle Grade Bunker Buster - BG BB
    8.55" Blade Length 14.15" Overall Length 1.9" Blade Width .225" Blade Thickness 21.1 Ounces
    Saber Ground Red/White/Blue American Flag Cerakoted Blade with V-Ground Edge
    Textured Handle which can be either Canvas Micarta or G10 but is unknown because it's also protected and coated with the Cerakote Coating
    SR101 Blade Steel, Full Size Choil, Skull Crusher
    The options on this Tank Buster is, with Swedge, Choil, Plain Edge, Magnum Handles with Skull Crusher!
    This was Brand New from the OP2W-HOGanzaaa and an Exclusive for ONLY this online Ganza! This Battle Grade Patriot Bunker Buster Model with the Red/White/Blue Flag Cerakote was available for sale in the one Ganza and was discontinued and doubtful if it will be done again.

    The Bunker Buster was introduced by Jerry Busse in April of 2016 as part of "Operation Two Weeks" and have since than been discontinued. This one is the Battle Grade so it has the SR101 Blade Steel! This has a Saber Ground Red/White/Blue American Flag Cerakoted Blade with V-Ground Edge is Razor Sharp! This particular knife was purchased by me directly from Busse Combat. There were very small quantities of these made in this Red/White/Blue American Flag Cerakoted and sold out as not enough made to meet the demand. The Cerakote cover not only the blade but the Magnum Textured Handle and protects it. The handle material is either canvas micarta or G10 but is unknown because it is coated but either way, it also is covered with the lifetime warranty. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, you never know! This is Brand New: Never Used, Carried or Sharpened!
    Sold
     
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Team Gemini Light Brigade TGLB .265" Competition Finish Blade w/fuller, Magnum Textured Black/Tan G10 Handle
    TGLB - Team Gemini Light Brigade
    7.75" Blade Length 13.15" Overall Length 1.35" Blade Width .265" Blade Thickness 17.9 Ounces
    Saber Ground Shallow Hollow Ground Blade with V-Ground Edge
    Magnum Textured Black/Tan G10 Handle
    INFI Blade Steel, Full Size Choil, Fuller (Blood Groove), Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This is Brand New purchased directly from Busse Combat. The TGLB - Team Gemini Light Brigade Model can no longer be order from the Busse Company
    because it's Sold Out, and has been Discontinued!

    These TGLB - Team Gemini Light Brigade were introduced by Jerry Busse in 2012 and have long been discontinued. The Team Gemini was made famous by
    the TV Series The Walking Dead where it was carried by the character Daryl Dixon and used to dispatch herds of zombies. It was made legendary by its use
    in military campaigns around the world. The Team Gemini is one of our most popular blades and for good reason. Now many people have pause the show
    and blown up the picture to see what knife was used and this would be the one in the color combination. The knife on the Walking Dead show has no
    coating and the ONLY version of the TGLB without the coating which is called "Competition Finish." This Competition Finish is not to be confused with the
    satin finish, this may have machining lines, dimples, scratches or whatnot. This knife was meant to be used. The handle is easy to identify and is this
    Magnum Textured Black/Tan G10 Handle. This one is Brand New and a RARE and a MUST Have for any Busse Collector! This is Brand New, never used,
    carried or sharpened.
    Sold
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    Busse Combat Custom Shop Old School Custom Integral Dagger BOSC ID .393" Satin Double Convexed Edged Blade, Hand Smooth Black G10 G-rexed Red Mammoth Tooth Handle w/Red Liners
    Boss Old School Custom Integral Dagger - BOSC ID
    4.2" Blade 9.3" Overall .16" Blade Thickness 1.1" Blade Width .393" Thick Bolsters 6.7 Ounces
    Double Edged Convexed Hand Finished Satin Blade w/Blood Groove (Fuller) with a Convexed Edge
    Custom Hand Smooth Black G10 G-rexed Meteorite Handle
    INFI Blade Steel, Small Choil

    Sold
     

    Attached Files:

  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Rick Hinderer Custom 4th Gen XM18 3.5" Bowie Satin Flipper, Stonewashed Titanium Lockside w/Textured Titanium Scale
    3.5" Blade Length 8.2" Overall Length 1.1" Blade Width .165" Blade Thick 5.9 Ounces
    Custom Double Deep Hollow Ground Hand Finished Satin Blade with V-Ground Edge
    Textured Stonewashed Titanium Scale
    Blue Anodized Stonewashed Finish Titanium Pivot Screw, Handle Screws, Standoff, and Lockbar Stabilizer
    4th Gen with the Blade Stop next to the Pivot.
    Rick Hinderer Custom Logo Lasered on the blade.
    This is Brand New from the 2014 New York Custom Knife Show in NJ.
    Here is a Super Rare Custom that was free hand ground by Rick Hinderer for the lottery at the 2014 New York Custom Knife Show. As we all know, custom Rick Hinderer knives are harder to come by as he does not make many anymore. This one is the custom Bowie Blade with the Deep Hollow grind with a swedge on the top. This has a smooth opening action with the newer detent for the 4th Generation. This has the Solid early lockup with a centered blade. This has a nice strong detent so the blade with fly out when the blade is engaged. This knife comes with the Textured Stonewashed Titanium Scale along with the Blue Anodized Stonewashed Finish Titanium hardware to really make this knife stand out. This will come with a Hinderer Box autographed by Rick Hinderer at the show. This will come with the clear Zip lock baggie and tactical peanuts. Dead Mint, Unused/Un-carried & Dead Mint Condition. This was never used, carried or sharpened! DEAD MINT!
    Sold
     
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat NMFBM .28" Doublecut Blade, Magnum Textured Black/Tan G10 Handle
    NMFBM - Nuclear Meltdown Fusion Battle Mistress
    11.5" Blade Length 17.5" Overall Length .28" Blade Thick 32.1 Ounces
    Doublecut (Bead-blasted) Full Height Convexed Blade with V-Ground Edge
    Magnum Textured Black/Tan G10 Handle
    INFI Blade Steel, Full Size Choil, Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This is Brand New directly from the 2015 Spring Knob Creek Show in KY. The NMFBM is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!
    This knife was introduced in 2008 by Jerry Busse from the Busse Combat and has long since been discontinued. What's Special about this knife is that normal production NMFBM all had coated blades that were .25" Thick and the Limited Editions were all .27"-.28" Blades so this is one Limited Edition Blanks! I purchased this brand new directly from Busse Combat at the Knob Creek Show 2015! There are not many of these NMFBM with the Doublecut this is very rare! I would say less than a handful of these were ever made. These are one of the Grail Knives of the Busse World! This still has the original Full Height Convexed edge that is razor sharp! This one is brand new, never used, carried or sharpened.
    Sold
     
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Knife Works Rodent Waki .19" Hammered Silver Convexed Blade, Textured Blue/Black G10 Handle
    Rodent Waki
    17" Blade Length 27.5" Overall Length 1.35" Blade Width .19" Blade Thickness 31.8 Ounces
    Hammered Silver Coated Convexed Blade with a V-Ground Edge
    Textured Blue/Black G10 Handle
    SR101 Blade Steel with Full Size Choil
    This is Brand New directly from the 2017 Blade Show in Atlanta GA. The Rodent Waki in is no longer available for sale through the Swamp Rat Knife Company because it has been discontinued and can't be ordered anymore!
    The Swamp Rat Rodent Waki was introduced by Swamp Rat Knife Works in 2009 in response to the demand of a cheaper version of the Busse Combat AK47. The Rodent Waki is a very popular and infamous sword made by Swamp Rat which is the sister company of Busse Combat! This is very similar to the Busse AK47 but uses the SR101 steel which was more affordable to the collector that was trying to save a few dollars. This model has also long since been discontinued! The Swamp Rat Knife Works must have had a few blanks left over so they made them special and brought them to the 2017 Blade Show in Atlanta GA. The Hammered Silver Convexed Blade with a V-Ground Edge is Razor Sharp! This has a Textured Blue/Black G10 Handle. The Hammered Silver coating which was never an option when they were available for pre-order many years ago so this is extra ultra rare as this color was just made recently! The Hammered Silver goes so well with the the Blue/Black G10 and this is probably the only one in the world with this color combo. This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat at the 2017 Blade Show in Atlanta Ga! This knife will carry a lifetime warranty from Swamp Rat! This is Brand New, never used, carried or sharpened.

    Sold
     
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop War Train Fusion WTF Battle Grade .245" Saber Ground Grey Camouflage Cerakoted, Magnum Textured Handle
    WTF BG - War Train Fusion Battle Grade
    11" Blade Length 17.25" Overall Length 2.75" Blade Width .245" Blade Thickness 33.5 Ounces
    Saber Ground Grey Camouflage Cerakoted Coated Blade with V-Ground Edge
    Textured Magnum Coated Handle (underneath the coating can be either Canvas Micarta or G10)
    SR101 Blade Steel, 58-60Rc with Choil
    This is Brand New purchased directly from Busse Combat from the 2018 Blade Show in Atlanta Ga. This War Train Fusion Battle Grade Model was available for sale during "Operation Two Weeks" starting January 27, 2016 and was discontinued about two weeks later so can no longer be order from the Busse Company Website because it's Sold Out, and has been Discontinued!

    These War Train Fusion were introduced by Jerry Busse in 2016 and have long been discontinued. This was based on one of his designs from the 80's with an updated Fusion Handle. There was two options, you can either purchase with a thicker INFI blade with a Hand Finished Satin Blade or get it with a coated SR101 that was slightly thinner at less than 1/3 the cost of the thick Satin INFI! As part of "Operation 2 Weeks" it won't be around for long but I have little doubt that it will be our fastest selling Battle Grade to date! These "Sold Out" in only a few days! I guess they had very few of these left over laying around and decided to get a few Ultra Few done with a new Cerakote Pattern. This may be a one of a kind but I know there were definitely less than five ever made with this pattern. This has a new design which has different shades of Grey in different random patterns throughout the entire knife. The Cerakote coats not only the blade but the Magnum Textured Handles and protects it. The actual handle material is unknown can be either canvas micarta or G10, and because it is coated, is not known but will still have the lifetime guarantee. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this cerakote pattern on their knives and will never do it again, so get this now! This is one monster of a chopper, with this being so thick and wide with some great weight that this is one heavy duty Chopper! This is Brand New, never used, carried or sharpened. This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find because Busse Combat didn't even have any tables at 2018 Blade show and was there only for the induction dinner with Grab Bags!
    Sold
     
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    KC427 Busse Combat Custom Shop Anniversary Flying Nuclear MoJo .25" Saber Ground Satin Blade, Hand Smooth Black G10 Handle
    Anniversary MoJo - AM
    8.15" Blade Length 3.25" Sharpened Swedge 14.25" Overall Length 1.65" Blade Width .25" Blade Thickness 19.7 Ounces
    Saber Ground Hand Finished Satin Blade w/Blended Convexed Edge with a Sharpened Swedge w/4 Serrations on the top (Nuclear) and 4 Serrations on the bottom front (Flying)
    Custom Hand Smooth Black G10 Handle
    INFI Blade Steel, Full Size Choil, Swedge, Hook (Blade Catcher)
    This one is Brand New from the 2014 Spring Knob Creek Show in KY! These Anniversary MoJo are not being sold by Busse Combat any more and have been Sold out and discontinued!

    The Anniversary MoJo was introduced in December of 2012 and have since been discontinued. This is a true Custom and very RARE knife made by the Busse Custom shop! The earlier original models introduced by Jerry Busse in 2001 with the Ergo Handles of these was called "Mr. MoJo" and the hook was there for a blade catcher as this was a combat fighting knife! This has a INFI Steel that is .25" thick Satin Finish with a razor sharp w/Blended Convexed Edge! Busse uses the term Flying to refer to the serrations on the front "sweep" of the blade. The term "Nuclear" refers to the sharpened top edge of the spine either with or without serrations. Each of these are hand made with hand picked and custom Hand-Shaped Matched Handle with Finger Grooves! This one has a Custom Contoured Hand Shaped Black G10 Handle with Finger Grooves! This is Brand New: never used, carried or sharpened. This knife was purchased directly by me from Busse Combat and than spent it's life in a safe so nobody else has owned or handled this knife besides myself.
    Sold
     
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Anniversary Flying Nuclear MoJo .25" Saber Ground Satin Blade, Hand Smoothed Black G10 Handle
    Anniversary MoJo - AM
    8.15" Blade Length 3.25" Sharpened Swedge 14.3" Overall Length 1.65" Blade Width .25" Blade Thickness 19.1 Ounces
    Saber Ground Hand Finished Satin Blade w/Blended Convexed Edge with a Sharpened Swedge w/4 Serrations on the top (Nuclear) and 4 Serrations on the bottom front (Flying)
    Custom Hand Smoothed Black G10 Handle
    INFI Blade Steel, Full Size Choil, Swedge
    This one is Brand New from the 2014 Spring Knob Creek Show in KY! These Anniversary MoJo are not being sold by Busse Combat any more and have been Sold out and discontinued!
    The Anniversary MoJo was introduced in December of 2012 and have since been discontinued. This is a true Custom and very RARE knife made by the Busse Custom shop! The earlier original models introduced by Jerry Busse in 2001 with the Ergo Handles of these was called "Mr. MoJo" and the hook was there for a blade catcher as this was a combat fighting knife! This has a INFI Steel that is .25" thick Satin Finish with a razor sharp w/Blended Convexed Edge! Busse uses the term Flying to refer to the serrations on the front "sweep" of the blade. The term "Nuclear" refers to the sharpened top edge of the spine either with or without serrations. Each of these are hand made with hand picked and custom Hand-Shaped Matched Handle with Finger Grooves! This one has a Custom Contoured Hand Shaped Black G10 Handle Handle with Finger Grooves! This is Brand New: never used, carried or sharpened.
    Sold
     
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat CGFBM .24" Aged Bronze Cerakoted Blade w/CBTs, Textured Canvas Micarta Handle (1 of 14)
    CGFBM - Combat Grade Fusion Battle Mistress
    10.15" Blade Length 16.2" Overall Length .24" Blade Thickness 26.7 Ounces
    Flat Ground Blade with CBT (Corrugated Bevel Technology) and V-Ground Edge
    Saber Ground INFI Steel with V-Grind Edge
    Textured Handle which can be either Canvas Micarta or G10 but is unknown because it's also protected and coated with the Cerakote Coating.
    INFI Blade Steel, Full Size Choil
    This is Brand New from the 2015 Blade Show in Atlanta Ga where only 14 of these were available for sale. The Busse CGFBM - Combat Grade Fusion Battle Mistress is no longer being made and has been discontinued so get this while you still can
    The Combat Grade Fusion Battle Mistress was introduced by Jerry Busse in 2006 and has long been since discontinued. This knife is one of the rare knives that Busse decided to make only 14 of and have them Aged Bronze Cerakoted for this ONE Show! The actual handle material is unknown can be either canvas micarta or G10, and because it is coated, is not known but will still have the lifetime guarantee. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, you never know! INFI is a proprietary Steel is used by Busse Combat knives and is Legendary! This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find Because this color combination was never offered when it was in production and only a handful ever made! Never Used, Carried or Sharpened!
    Sold
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,837
    93
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat RMD Infidu .17" Saber Ground Satin INFI Blade, Textured SOS Orange G10 Handle
    Ratmandu - RMD
    5.25" Blade Length 10.3" Overall Length .17" Blade Thickness 10.3 Ounces
    Saber Ground Hand Finished Satin Blade w/Blended Convexed Edge
    Textured SOS Orange G10 Handle
    INFI Blade Steel with Full Size Choil
    This is Brand New directly from the 2014 Blade Show in Atlanta GA. The Infidu is no longer available for sale through the Swamp Rat Knife Company because it's Sold Out, and has been Discontinued!

    The Swamp Rat Knife Company decided to do something special for the 2014 Blade Show in in Atlanta GA so they made a few of these Ratmandu in a Hand Finished Satin INFI Blade just for the show. They only made a few in each color so get it before it's gone. There were only a few of these made by hand by the Custom Shop and I purchased this knife directly from the Swamp Rat Knife Company at that Show. This has a INFI Steel that is .17" thick with a Saber Ground Hand Finished Satin Blade w/Blended Convexed Edge which is Razor Sharp! The Satin Blade goes perfectly with the Textured Black G10 Handle. This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives and was never available for this model Swamp Rat Ratmandu before. This knife will carry a lifetime warranty from Busse Combat! Here is your chance to own a beautiful piece of History!
    Sold
     

Share This Page