1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 11th Thread

Liu Kang Oct 7, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop SAR8 .215" Convexed Satin Blade, Full Lacewood Handle w/Mosaic Pins & Orange Liners
    Search & Rescue 8 - SAR8
    8.5" Blade Length 14.25" Overall Length 1.45" Blade Width .215" Blade Thickness 39.5 Ounces
    Full Height Hand Finished Convexed Satin Blade with V-Ground Edge
    Custom Hand Shaped Full Lacewood Handle w/Mosaic Pins & Orange Liners
    INFI Blade Steel, with Choil & Nuclear Meltdown Treatment on the Spine and Edges (rounded edges)
    This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta GA. The Search & Rescue 8 has been discontinued for a good while and very hard to find even on the secondary market!
    The Busse Combat Search & Rescue 8 - SAR8 was first introduced by Jerry Busse in 2009 and has long been discontinued. The SAR8 were offered in only specific color color combination and were only offered through the Busse Company Store. The Busse Custom Shop made one and brought this to the 2016 Blade Show in Atlanta GA. This is special because most SAR8 had a convexed edge but this one has a V-Ground Edge. They also went all out to make this So this Full Lacewood Handle finished off with Mosaic Pins & Orange Liners. This is a "One of a Kind" and you will never find another one like it! This was purchased directly from Busse Combat by myself at the 2016 Blade Show in Atlanta GA. This is Brand New, never used, carried or sharpened. You will never see another even close to this and can see a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! This is Brand New, never used, carried or sharpened.
    Sold
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Team Gemini .25" Saber Ground Satin Blade, Blue/Black G10 G-rexed Mammoth Tooth w/German Nickle Silver Tubes
    Team Gemini - TG
    7.8" Blade Length 13.25" Overall Length 1.55" Blade Width .25" Blade Thickness 21.9 Ounces
    Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smoothed Blue/Black G10 G-rexed Mammoth Tooth w/German Nickle Silver Tubes
    INFI Blade Steel, Full Size Choil With Swedge
    This is Brand New from Busse Combat at the 2016 Blade Show in Atlanta Ga. The Team Gemini is no longer available for sale through the Busse Combat because it's Sold Out, which means it had been Discontinued!
    Jerry Busse introduced the Team Gemini in 2010 and this model has long been discontinued. Now there has never been a Team Gemini Limited Edition made but if there was one I think this would be the blank they would use for it. This is a one of a kind custom that the Busse Custom Shop made just for the 2016 Blade Show in Atlanta Ga! This was a very few Rare ones that exist that are customs. This has a INFI Steel that is .25" Thick with a Hand Finished Satin on a Flat Saber Ground INFI Blade with a V-Ground Edge! This uses the same Satin Team Gemini blank that was only available at Blade 2014! The Saber Ground Satin Blade with a V-Ground Edge is Razor Sharp and was never offered on the Satin Team Gemini! The Busse Custom Shop went all out for the handle and made a Custom Hand Smoothed Blue/Black G10 G-rexed Mammoth Tooth finished off with German Nickle Silver Tubes. You can tell just by looking at it that a lot of thought, time and work went into this knife! This is Brand New, never used, carried or sharpened.
    Sold
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Rick Hinderer Custom XM18 4th Gen 3.5" Harpoon Tanto Satin Flipper, Blue Anodized Stonewashed Full Titanium Handles w/Horses
    3.4" Blade Length 8.2" Overall Length 1.1" Blade Width .17" Blade Thick 5.3 Ounces
    3.5" Hollow Hand Ground Satin Finish Harpoon Tanto Flipper
    Tan G10 Scale
    Custom Hand Ground Satin Finished Laser Engraved Hollow Ground S35VN Blade
    Custom Hinderer Logo Horses Engraved Blue Anodized Stonewashed Finish 6AL4V Titanium Lock Side, Liner & Lockbar Stabilizer
    Bronze Anodized Stonewashed Finish Titanium Pocket Clip, Pivot Screw and Filler Tab
    Modular Backspacer System H.M.B.S. is made from solid aluminum with a Bronze Anodized finish & Backspacer/Screws.
    4th Gen with the Blade Stop next to the Pivot.
    Rick Hinderer Custom Logo marked on the blade.
    This is Brand New directly from the 2016 Blade Show in Atlanta Ga.
    Here is a Fresh New one from the Friday Hinderer Lottery at Blade 2016! This was won and picked this out every early in the lottery. This is beautiful and a full custom from a hand ground custom Hollow triple ground blade to a custom Hinderer Logo Horses Engraved Blue Anodized Stonewashed Finish Lock-side. This in this setup is a One of a Kind" and there is not another one like it in this world! This thing has ultra smooth flipping action with a solid early lockup with a centered blade. This also as the new Modular Backspacer System H.M.B.S. is made from solid aluminum with a Bronze Anodized finish. This is exactly how it came directly from Rick Hinderer in this color. At first I didn't like the Tan G10 but within a few seconds, I figured out with They put that on there. It matches very well with the Bronze Titanium Pocket Clip, Pivot Screw, Filler Tab, H.M.B.S. and backspacer. If you look at the custom lock side, you will see it is Blue Anodized Stonewashed Finish but there also appears to have hints of Bronze around the Engraved Hinderer Horses. This has a nice strong detent so the blade with fly out when the blade is engaged. This will come with a Hinderer Box autographed by Rick Hinderer at the Blade 2016 which is where this knife is from, Zip lock baggie and tactical peanuts. This was never used, carried or sharpened! DEAD MINT!
    Sold
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Fatback Defenders .325" Saber Hollow Ground Satin Blade, Full Hand Smoothed Buckeye Burl Wood Handle w/German Nickle Silver Tubes & Red/Black Liners
    Fatback Defenders - FD
    4.3" Blade Length 9.05" Overall Length 1.05" Blade Width .32" Blade Thickness 11.3 Ounces
    Hand Ground Saber Hollow Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Full Hand Smoothed Buckeye Burl Wood Handle w/German Nickle Silver Tubes & Red/Black Liners
    INFI Blade Steel at 58-60Rc with Small Choil
    This is Brand New straight from the Busse Custom Shop! This Fatback Defender model with standard handles was available for sale starting April 27th 2016 through May 5th, 2016 and has been discontinued so can no longer be order from the Busse Combat.
    The original Public Defender was introduced by Jerry Busse in 2002. The Public Defender was a really cool knife with only a 4.5" blade at about .187" thick. This is about as close to a Tanto Blade as you were going to get from Busse Combat. Well, fast forward 14 years later, Busse takes the design and adds an Ergo Handle to the design and makes it in three versions. The versions are: Ergo Public Defender Limited Edition, the Ergo Public Defender Battle Grade and the thick version called Fatback Defender! Garth Reckner first introduced the Fatback Defender in Spring of 2016 and it has long since been discontinued. You will notice all Fatback Defenders were offered through the Busse Custom Shop and that is because these were all done by hand. The ones that were available for order have a custom Deep Hollow Ground Blade all done by hand. Well, this one is different and is a full blown custom. The Busse Custom Shop put a Deep Dish Hollow Ground Grind with a Hand Finished Satin Blade with a very fine V-Ground Edge on this beauty. Then they also went all out on the Handle with a Custom Full Hand Smoothed Buckeye Burl Wood Handle finished off with German Nickle Silver Tubes & Red/Black Liners. This was a "One of a Kind" and you will never see another one like it. You can tell a lot of thought, planning and work went into making this beautiful knife. This is Brand New, never used, carried or sharpened.
    Sold
     
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat 2nd Gen Badger Attack Ergo .23" Saber Ground Midnight Blue Blade, Textured Magnum Yellow/Black G10 Handle
    2nd Gen SHE - Second Generation Steel Heart Ergo
    4.8" Blade Length 10.2" Overall Length 1.55" Blade Width .23" Blade Thickness 14 Ounces
    Flat Saber Ground Midnight Blue Blade with a V-Ground Edge
    Textured Magnum Yellow/Black G10 Handle
    INFI Blade Steel, Small Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. This is special as it uses the Midnight Blue coating that was not an option when this was available for orders and was done as an exclusive for the 2017 Blade show. This Model was available for "Operation Two Weeks" starting December 23, 2015 through December 28, 2015 and has been discontinued so can no longer be order from the Busse Company Website!
    The Steel Heart E - SHE was introduced by Jerry Busse in 2001 and has since been discontinued. Many didn't think it looked well but those that have handled it know the ergo handle felt great in the hand and the INFI steel would handle anything you can put it through.
    In 2015 Jerry Busse introduced the 2nd Gen Badger Attack Ergo saying this:

    The Second Generation Badger Attack E is a complete redesign. Whereas the original BAE had the same handles, choil and blade width as the Steel Heart E, this entire platform has been downsized, making it a perfect dayhiker and EDC for places where 5" is the maximum blade length. The blade is robust enough to handle anything you can throw at it while maintaining excellent blade geometry for cutting and slicing.

    It was part of "Operation Two Weeks" and was available for pre-order at that time. The catch was this was only available in Combat Grade meaning INFI steel but with a coating. But for the 2017 Blade Show, Busse Combat must have had some of these blanks left over and did something special and coated these with the Midnight Blue coating and Yellow/Black G10. Neither of these were options that you could choose when these were available for order. There were also not many of these made in these colors so these are super rare. This has a Flat Saber Ground Midnight Blue Blade with a very sharp V-Ground Edge which is Razor Sharp! The Busse Custom Shop did something different with the handles and went with a non standard optional color for this show and did a Textured Magnum Yellow/Black G10 Handle. For those that do not know, Yellow and Black are the Busse colors. This is the very first time they used the Midnight Blue coating on this model. The color is beautiful that shows different colors at different angles. This color blade goes very well with the Textured Magnum Yellow/Black G10. This is Brand New, never used, carried or sharpened.
    Sold
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Rick Hinderer Spanto 3rd Gen XM18 3.5" Satin Flipper w/Deep Swedge, Cue Ball Anodized Stonewashed Ti, Textured Translucent G10 Scale
    3.4" Blade Length 8.15" Overall Length 1.15" Blade Width .163" Blade Thickness 5.3 Ounces
    Triple Ground, Deep Hollow Ground Satin Finish Spanto Blade with V-Ground Edge
    Custom Hand Un-Marked Duratech 20CV Blade
    Translucent G10 Scale
    Custom Cue Ball Anodized Bead Blasted 6AL4V Titanium Lock Side/Liner
    Blue Anodized 6AL4V Titanium Pocket Clip, Filler Tab, and Backspackers
    Third Generation with with the stop pin next in the middle of the lock side.
    This will come with the original Baggie and that is it. This is Brand New from a personal collection that has been safe queen.

    This is from the rare early Hinderer 3rd Generation Flipper with a satin finish. This knife went into a private collection where it was handled but never used carried or sharpened. This is beautiful rare and a full custom from a hand ground custom Hollow triple ground Spanto Deep Hollow Ground blade with a swedge along the spine. This is a "One of a Kind" and there is not another one like it in this world! This thing has ultra smooth flipping action with a solid lockup and a centered blade. This has a hand applied Satin Finish on the blade. And according to all the posts since this is an Un-Marked Blade, the blade steel is Duratech 20CV. The amazing thing that really stands out about his knife is the Custom Cue Ball Anodized Bead Blasted 6AL4V Titanium Lock Side and Liner. This has matched Blue Anodized Bead Blasted 6AL4V Titanium Pocket Clip, Filler Tab and Backspacers. You can tell a lot of time and thought went into the making of this knife. This is exactly how it came directly from Rick Hinderer in this finish. This has a nice strong detent so the blade with fly out when the blade is engaged. This will come with only baggie. This is Brand New: never used, carried or sharpened.
    Sold
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Rick Hinderer Custom XM18 4th Gen 3.5" Flipper Satin Skinner, Stonewashed Full Ti Handles
    3.5" Blade 8.2" Overall Length .165" Blade Thickness 5.5 Ounces
    3.5" Hand Hollow Ground Satin Skinner Flipper
    Orange G10 Scale
    Hand Satin Finished Un-Marked S35VN Blade Steel on Blade
    Stonewashed Finish Titanium Lock Side, Liner, Pocket Clip, and Filler Tab, .
    4th Gen with the Blade Stop next to the Pivot.
    Rick Hinderer Custom Logo marked on the blade.

    This is a rare custom hand ground knife by Rick Hinderer from the Blade 2015 lottery where he called my name and I went up and hand picked this knife personally!. I have been the the Hinderer Ranch where he hand ground one of the skinners before and told us each one is completely differently because the top Swedge are all done free hand and is a bit different from others as it all depends on what he feels like doing that day. On this particular one, I have never seen one with such a large swedge on the front top of the blade. This one has Smooth opening action, Early Solid lockup with a centered blade. This has a
    nice strong detent so the blade with fly out when the blade is engaged. This will come with a Hinderer Box autographed by Rick Hinderer at the Blade 2015 which is where this knife is from, Zip lock baggie and tactical peanuts. This was never used, carried or sharpened! DEAD MINT! This is Brand New, never used, carried or sharpened and has been sealed air tight and in a safe it's entire life. This was in my personal knife collection and a true grail. This is a "One of a Kind" and you will never see another one like this so here is your own chance to own a piece of Hinderer History.
    Sold
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Premier Reticles Heritage Hunter 3-15x50 30mm Tube, First Focal Plane (FFP) A7
    Here is a super rare find of Old Stock in Brand New Condition! Introducing the first big game hunting scope from Premier Reticles which was only in production for a very short period. The Premier 3-15x50mm Hunter owes its pedigree to the same German optical engineering that distinguishes the sniper scopes that Premier builds for the United States Marine Corps. This was designed in Germany and made here in the United States. This is as rugged as they come. The Hunter model has two solid Aluminium Screw on covers for the turrets to prevent any damage when traveling. And the five-time magnification delivers an un-compromised field-of-view throughout the power range. Premier Heritage is well known for the crisp clear clean glass that provides the best lighting with the best accuracy! They use only the very best materials this making debating the best scopes for those who demand only the very best! This scope in this listing does NOT have the recital illumination. This is Brand New in the box as they came in 2011, along with Scope Glove and foam for storage and transportation These have been discontinued and sold out everywhere so this is a true barn find that you will probably never have another change at buying. Ultra Rare to find one in this condition. I bought a few directly from a authorized dealer so this was never even in any private hands besides mine and only taken out to check over and take pictures. These have never been used, mounted, carried or used in any way.

    Premier Heritage 3-15x50 Hunter (moa) Specifications


    Manufacturer: Premier Reticles
    SKU: PRH11012
    Riflescopes series: Hunter
    Variable magnification: Yes
    Minimal magnification: 3x
    Maximal magnification: 15x
    Lens diameter: 30mm
    Min. exit pupil diameter: 3.5 mm
    Max. exit pupil diameter: 11.5 mm
    Min. eye relief: 90 mm
    Max. eye relief (mm): 90 mm
    Minimal field of view: 2.8 m/100m
    Maximum field of view: 12.8 m/100m
    Twilight Factor: 12.2 - 27.4
    Light transmission
    Reticle position: 1. focal plane - FFP
    Reticle illumination: No
    Adjustment per click: 7mm/100m - 1/4MOA
    Elevation: 62 / 41 mrad
    Windage: N/A
    Turret Type: No
    Elevation Per Turn
    Nr. Turret Turns: No
    Turret rotation direction: No
    Parallax adjustment: Yes - side focus
    Parallax adj. range: 50 - inf.
    Diopter range: +2.5 / -3 dpt
    Fast focus eyepiece: Yes
    Lens coating: Multi-coated
    Waterproof: Yes
    Fogproof: Yes
    Shockproof: Yes
    Built-in rangefinder: No
    Temperature range: -20 / +55°C
    Filled with Nitrogen
    Color: N/A
    Length: 345 mm
    Tube diameter: 30 mm
    Objective diameter: 57 mm
    Eyepiece diameter: 45 mm
    Mount length: 157 mm
    Mount rail: No
    Weight: 704 g
    In production since: 2011
    Warranty: 30 years
    Made in USA


    Premier Heritage 3-15x50 Hunter (moa) Details
    Premier Heritage Hunter 3-15x50 (moa) rifle scope provides the user with excellent optical properties, legendary ruggedness of Premier Heritage brand and a very useful magnification range from 3 to 15 times. The reticle’s clicks are calibrated in a 1/4 degree angle (MOA - minute of angle), which means that one click is approximately 7mm at a distance of 100m. Premier Heritage Hunter rifle scopes are a derivative of the Premier Light Tactical series and are with the exception of tactical turrets identical. Based on the price range, the quality of optical qualities in respect to diffusion and the general properties like robustness, they are almost without competition. The reticle is set in the first focal plane, which is the optimal solution for use in the dark. Due to the generous 5 times ratio between the minimum and maximum magnification they are extremely useful for short to extremely long-distance shooting. Premier Heritage Hunter rifle scopes have an amazing price but still give credit to the name they so proudly bear. This Premier Reticles Heritage 3-15x50 Light Tactical Rifle Scope, Non-Illuminated has been discontinued by Premier Reticles and is no longer available so get this now. This has MOA turrets with MOA reticle. As you can see from the pictures this is Brand New in Box and you will get the exact scope you see in the pictures. This functions flawlessly and the lens is mint. I'm sure if you are looking at this now, you know what you are looking at and know what this is worth.
    Although Premier Reticle is no longer in business, Tangent Theta now has the rights to it and they will now carry on the warranty. You can call Tangent and give them the serial number off this scope and they will verify that they will cover the warranty!
    Sold
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Rick Hinderer XM24 Spearpoint Flipper, S35VN Satin Blade, Earth Brown Frag G10 Scale
    4" Blade Length 9.125" Overall Length .185" Blade Thickness 7.5 Ounces
    Hand Hollow Ground Satin Spearpoint Flipper
    Earth Brown Frag G10 Scale
    Hand Satin Finished Un-Marked S35VN Blade Steel on Blade
    Stonewashed Finish Titanium Lock Side, Liner, Pocket Clip, and Filler Tab
    Rick Hinderer Custom Logo marked on the blade.

    Here is a super rare knife that you rarely see any more, this is a Custom Rick Hinderer XM24 Spearpoint Flipper. As most hardcore Rick Hinderer collectors know, Rick has not made many custom XM24 for many years now. This knife is dead mint and won at one of the knife shows in 2012 or 2013 that Rick Hinderer attended and held a lottery. This has a beautiful hand ground, deep hollow ground spearpoint blade with a hand finished Satin finish. This is also the flipper version that everyone loves much more. This one has an early lockup and the blade is centered. The Flipping action is very smooth. This has a Earth Brown G10 Frag Scale made by Rick Hinderer Knives exclusively for Monkey Edge . No Scratches or flaws on the entire knife. This is about as nice are you are going to be able to get, perfect for the very best collection. There are not many custom hand ground Rick Hinderer XM24 that were ever made so you won't find many of them available for sale. I took this knife to Blade 2013 and had Rick Hinderer hand sign the box. This is Brand New, never used, carried or sharpened and has been sealed air tight and in a safe it's entire life. This was in my personal knife collection and a true grail. This is a "One of a Kind" and you will never see another one like this so here is your own chance to own a piece of Hinderer History.
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Scott Cook Custom "Off the Bench" Non-Typical Lochsa "FireClone" Damascus Blade with Mother of Pearl/Abalone Inlays
    3.45" Blade Length
    8.15" Overall Length
    .125" Blade Thickness
    1.1" Blade Width
    4.3 Ounces

    Norris "FireClone" Damascus Saber Ground Blade with V-Ground Edge
    Mother of Pearl/Abalone Inlays
    Solid 14K Gold double thumb lugs
    Handle texturing on Contour Shaped Integral Ti-6Al-4V Titanium Handle
    Mother of Pearl pivot pin & Handle inlay
    Newest Style Custom Clip with "Tip Up" carry
    Custom Mother of Pearl/Abalone Bead on Black Leather Lanyard
    Scott Cook Warranty Card with Date of Completion is August 2018
    Pivot Adjustment Tool


    Scott Cook made his first knife in 1991 and has only gotten better with each year. He is the very first knife maker to do the Integral folder and many have followed in his footsteps since his creation. An Integral Folder has the entire handle frame of the knife machined from a single piece of titanium. There are no stand offs, back-spacer etc. The entire handle is one piece, so if you didn't already know, it takes a lot of skilled work and many years of experience to come to this level. This is an enormous engineering and machining challenge which takes a lot of skills and knowledge. Since Scott was the very first person to create the Integral Folder, he has been doing it the longest and now has past the normal stages and has brought it to the next level. Since Scott's books are closed (no longer taking orders) he will make a full blown custom every once in a while and post them up for auction on his webpage and that's the only way to get one of these "Off the Bench" Non-Typical Lochsa Integral Folder!
    The FireClone Damascus is a complete custom steel made by that only Mike Norris makes! He uses Sandvik 19C27, D2, and 302 SS to create tapestries in stainless damascus in a pattern that is not just functional but also beautiful. Typical hardness for this material, when finished into blades, is HRC 58-60. Scott Cook hand ground this beautiful damascus to a flat Saber ground blade with a swedge on the front and top of the blade. This blade was finished off with a sharp V-Ground Edge. Installed on the blade are Solid 14K Gold double thumb lugs for manual opening. Scott Cook made a custom Abalone Bead to match the pivot and the largest circle inlay. There are six additional inlays of Mother of Pearl to offset the handle and change out the pattern on a contoured hand rubbed satin midsection. The front and back are textured for better grip and to offset the beautiful polished mid section but giving it more of a bolstered look. The side or where the spacers on a folder would be is still that one solid piece and it's also used as the blade stop. It is finished in a beadblast including the taper. At the butt of the knife, there are two holes made for the Lanyard for the custom made Abalone Bead on Black Leather Lanyard to match the Abalone Pivot Pin and Abalone inlay circle! Right below the lanyard holes on the knife, Scott Cook initials the knife with a SC so you can tell it's his one of his real custom knives. This has a Solid lockup with a smooth manual opening Centered Blade! There is no blade wiggle or play in any direction as the lockup on this knife is insane! This comes from my personal collection and I purchased this directly from Scott Cook. This will come with the box, Date of Birth Card, Tool, Ribbon, Abalone Bead on Black Leather Lanyard, and wrapping. As you can see, this knife was finished in August of 2018, so this is about as new as you are going to get. This is Brand New: never used, carried or sharpened! DEAD MINT! Please ask all questions and for all additional pictures prior to purchase as all sales are final. Because of the price of this custom, I would suggest if you are seriously interested in this knife that you give me a call or text before purchase.
    Sold
     
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Killa Zilla II .31" Convexed Brown Blade w/V-Ground Edge, Magnum Textured Tan Canvas Micarta Handle
    Killa Zilla II - KZII
    11.75" Blade Length 18.5" Overall Length 2.25" Blade Width (widest point) .31" Blade Thickness 31.8 Ounces
    Muddy Brown Full Convexed Blade with V-Ground Edge
    Magnum Textured Tan Canvas Micarta Handle
    INFI Blade Steel, Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This is Brand New purchased directly from Busse Combat at the 2015 Spring Knob Creek Show in KY. The Killa Zilla II is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    These Killa Zilla were introduced by Jerry Busse in 2010 and have long been discontinued. These were made after they made the Killa Zilla Test Team. They got the feedback positive and negative and made the changes to make these models! This one is much thicker than the other ones I have seen, this one comes in at about .31" thick! The Muddy Brown coated Full Height Convexed Blade with V-Grind Edge is Razor Sharp! This has a Magnum Textured Tan Canvas Micarta Handle which goes perfectly with the Muddy Brown Blade. Not only is this a beautiful piece but it's fully functional and will handle anything you can throw at it. The V-Grind Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Anniversary Mean Street .185" Moss Green Blade, Textured Black/Tan G10 Handle
    Anniversary Mean Street - AMS
    3.7" Blade Length 8.25" Overall Length .185" Blade Thick 5.3 Ounces
    .185" Blade Thickness V-Ground Edge
    Moss Green Coated INFI Blade Steel
    Textured Black/Tan G10 Handle
    This is from the Spring Knob Creek 2015 Show.
    The Anniversary Mean Street is no longer available for sale through the Busse Combat website because it's Sold Out, which probably means it had been Discontinued!
    This Anniversary Mean Street is a beautiful knife made by Busse Combat. This is a really rare knife as the Moss Green coating has not been used on Busse knives in a pretty long time and could not be ordered. This has a V-Ground Edge and this one weights 5.3 ounces. This particular knife was purchased by me directly from Busse Combat at the Spring Knob Creek 2015 Show. INFI is a proprietary Steel is used ONLY by Busse Combat knives. This is Brand New, never used, carried or sharpened.
    Sold
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Anniversary Mean Street .185" Brown Blade, Textured Olive Green/Black G10 Handle
    Anniversary Mean Street - AMS
    3.65" Blade Length 8.25" Overall Length .18" Blade Thick 5.4 Ounces
    .18" Blade Thickness V-Ground Edge
    INFI Blade Steel
    Textured Olive Green/Black G10 Handle
    This is from the Spring Knob Creek 2015 Show.
    These Anniversary Mean Street are sold out on Busse Combat and can no longer be ordered so get these before the prices skyrocket!
    This Anniversary Mean Street is a beautiful knife made by Busse Combat. This has a V-Ground Edge and this one weights 5.4 ounces. This particular knife was purchased by me directly from Busse Combat at the Spring Knob Creek 2015 Show. INFI is a proprietary Steel is used ONLY by Busse Combat knives. This is Brand New, never used, carried or sharpened.
    Sold
     
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Hinderer Spearpoint Battlefield Pick Up XM-24 Flipper w/Weathered Camouflage Blade, Weathered Anodized Titanium Handle w/Olive Drab Green G10 Scale
    4" Blade Length 9.15" Overall Length 1.2" Blade Width .185" Blade Thickness 7.5 Ounces
    Production Saber Ground Weathered Camouflage Blade with V-Ground Edge
    Weathered Battlefield Pick Up Finished Anodized 6AL4V Titanium Handle, Liner, Filler Tab, Pivot Screw, Backspacers, Lockbar Stabilizer, Handle Nuts & Screws, and Pocket Clip
    Textured Olive Drab Green G10 Scale
    S35VN Blade Steel etched on Lock Side of the blade
    Battlefield Pick Up Finished 6AL4V Titanium Lock Side, Backspacers, Filler Tab, Pocket Clip, Pivot Screw, & Full Titanium Display Side Handle Scale
    4th Generation with with the stop pin next to the pivot.
    Rick Hinderer Horse Logo marked on blade.

    This is a Production Rick Hinderer Spearpoint XM24 in a Spearpoint in a rare Battlefield Pick Up Finish with an OD Green Scale. Hinderer really went all out to make this killer variation of the XM-24! Each one has been hand "weathered" and been given a beaten up, "been there, done that" vibe. Each comes loaded up with titanium upgraded parts, and are unique. Each will very from the next as they are all finished by hand. This one has a hand weathered patina-like finish. The flipper tab has special American flag engraving on one side designating it a Battlefield Pickup. Titanium frame has been given the "Battlefield Pickup" treatment. The multi color anodized titanium has been weathered, showing marks and scratches and pits, just like if the thing had come through a war zone! Full titanium hardware has been anodized and hand distressed, including the pivot screw, handle nuts, stand offs, and scale screws. Textured Olive Drab Green Scale is made from G10. This has a Smooth opening action, Solid lockup with a centered blade. This has a nice strong detent so the blade with fly out when the blade is engaged. This is Brand New and from a private collection which was a safe queen.Here is your chance to own a beautiful piece of History!
    Sold
     
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Bushwacker Mistress .205" Flat Ground Tanker Grey Blade, Textured Red Tequila Sunrise G10 Handle
    Bushwacker Mistress - BWM
    10.5" Blade Length 16.5" Overall Length .205" Blade Thickness 21.6 Ounces
    Flat Ground Tanker Grey Coated Blade with V-Grind Edge
    Textured Red Tequila Sunrise G10 Handle
    INFI Blade Steel with Full Size Choil
    This is Brand New direct from the 2015 Fall Knob Creek Show in KY. The Bushwacker Mistress were introduced in 2009 and have since been discontinued.
    The Bushwacker Mistress were introduced in 2009 and have since been discontinued. These Bushwackers were made to be thinner and lighter for faster chopping action for lighter work. This has the flat ground blade with the V-Ground Edge that is Razor Sharp. This has the Textured Blue/Black G10 Handle. INFI is a proprietary Steel is used ONLY by Busse Combat knives. This is Brand New, never used, carried or sharpened.
    Sold
     
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    NJ88 Busse Combat Custom Shop Urban Grudge .245" Flat Ground Satin Blade, Full Blue Giraffe Bone Handle w/Mosaic Pins
    Urban Grudge - UG
    5.45" Blade Length 10.65" Overall Length 1.15" Blade Width .245" Blade Thickness 9.6 Ounces
    Flat Ground Blade Satin Hand Finished with Blended Convexed Edge
    Custom Hand Shaped Full Blue Giraffe Bone Handle w/Mosaic Pins
    INFI Blade Steel, Large Choil
    This is Brand New purchased directly from Busse at the 2011 East Coast Custom Knife Show in NJ! The Urban Grudge has been discontinued so can no longer be order from the Busse Combat.

    The Busse Combat Urban Grudge was first introduced in 2010 by Jerry Busse and have been discontinued. When the Urban Grudge was offered, it was only available with a Doublecut (bead-blasted) Blade finish with Black Canvas Micarta. So this is truly a special "One of a Kind" custom that you will never see again! Every true Busse collector should have at least one Urban Grudge in his/her collection. These were not a production model and only available in Ganza and knife shows. The Busse Combat Custom Shop custom made this knife with a hand shaped Full Blue Giraffe Bone Handle finished w/Mosaic Pins! This is a "One of a Kind" and you will Never see another one like it. This is made with INFI Blade steel. This has a super rare satin finish and has a Convexed Edge, stamped with the Busse Custom Shop logo. Each piece of Giraffe Bone is different so each one is "One of a Kind" This is one of the few! This is Brand New: never used, carried or sharpened.
    Sold
     
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Rick Hinderer Eklipse No. 2 of 12 Tanto - Stonewash Bronze Anodized Titanium Handle
    2 of 12 Custom Eklipse from 2014 TKI Show
    Hollow Ground Tanto S35VN Blade, Flipper
    Stonewash Bronze Anodized Titanium Handle, Filler Tab, Pocket Clip, Pivot Screw, Back Spacers, Handle Nuts/Screws, Lockbar Stabilizer
    Specifications
    Overall Length: 8.25 in
    Blade Length: 3 5/8 in
    Cutting Edge Length: 3 1/2 in
    Blade Thickness: .165 in
    Closed Length: 4.72 in
    Weight: 5 Ounces
    Blade Material: S35VN
    Handle Material: Titanium
    This is Brand New with the original box and peanuts from the 2014 Tactical knife Invitational (TKI) Knife Show of 2014 in Las Vegas NV. At these TKI shows, the best knife makers from around the world present their very best and newest design knives but sale and auctions. Rick Hinderer decided to debut the newest design which was the Eklipse but needed to really show it off with custom grinds and handles. To make them all different and a full one of a kind customs, he made only 12 total custom knife with only four different grinds so there were three customs with each grind! All of them were different handle finishes so each one is "One of a Kind!" What is very interesting about these knives that most people didn't know was that they not only did a full titanium handles, but went over the top by holloing out the inside of Both sides of the slabs to reduce the overall weight. It was a lot of extra work to save a little bit of weight. So much went into the details. So this Eklipse is a bit longer than the XM18 3.5" model and even though it has a full Titanium Handle instead of the Titanium Liner with G10, this knife actually weighs less!


    As you can see, this will come with the original box with the sticker on it with the matching number which is #2 on both the blade of the knife and on the box. The grind is a Tanto and the date which was 1/21/2014.
    This has an ultra smooth Flipping Action with early solid lockup and a perfectly centered blade. This will come Brand New in Box, Baggie. Early Lockup with centered blade. Brand New in Box with Baggie. This is Brand New: never been used, carried or sharpened.
    Sold
     
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG][​IMG]
    [​IMG]
    CS388 Busse Combat Custom Shop Game Warden .22" Deep Hollow Satin Blade, Black G10 G-rexed Red/Pink Giraffe Bone Handle
    3.05" Blade Length 7" Overall Length .22" Blade Thickness 6.81 Ounces
    INFI Blade Steel
    Hand Ground Deep Hollow Ground Satin Blade
    Custom Magnum Hand Smooth Black G10 G-rexed Red/Pink Giraffe Bone Handle
    This is Brand New from the 2011 Spring Knob Creek Knife Show.
    This Game Warden was custom made by the Busse Custom Shop and made for one of the 2011 Spring Knob Creek Knife Show! This has a INFI Steel that is .22" Thick with a Satin Finish! The Deep Hollow Grind is all done by hand and is Razor Sharp! The Deep Hollow Grinds on a Game Warden were never made as a production so very few exist! This Black G10 G-rexed Red/Pink Giraffe Bone Handle is Beautiful and each one is hand custom made by the Busse Custom Shop. Each piece of Giraffe is different so each one is "One of a Kind"! INFI is a proprietary Steel is used by Busse Combat knives and this model was never avil for sale and probably NEVER AGAIN! This is Brand New, never used, carried or sharpened.
    Sold
     
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop HUCK Fin .19" Convexed Satin Blade, Hand Smoothed Tan Canvas Micarta G-rexed Pine Cones in Clear Amber Resin Handle w/Solid Brass Bolts
    HUCK - HOG Ultimate Combat Kukri
    12" Blade Length 6.7" Semi-sharpened Upper Spine 18.8" Overall Length 3" Blade Width (widest point) .19" Blade Thickness 28 Ounces
    Custom Full Height Convexed Hand Finished Satin Blade with a Very Fine V-Ground Edge
    6.75" Curved Semi-Sharpened Fin along the spine
    Custom Hand Smoothed Tan Canvas Micarta G-rexed Pine Cones in Clear Amber Resin Handle w/Solid Brass Bolts
    INFI Blade Steel, with a Sharpened Top Edge
    The HUCK Fin in Combat Grade (coated blade) was available for sale starting April 13, 2016 through April 17, 2016 and has been discontinued so can no longer be order from the Busse Company Website! This is Brand New purchased directly from Busse Combat.

    The "HUCK" (HOG Ultimate Combat Kukri) and "HUCK Fin" bring new life to a battle proven design in an all INFI Combat Grade.
    With 12" of INFI featuring our exclusive CBT (Corrugated Bevel Technology) out in front of the generous handles, the HUCK and HUCK Fin are more than ready for whatever you choose to throw at them.
    The standard HUCK brings the more traditional styling and while the killer cool HUCK Fin features a wickedly curved semi-sharpened Fin along the spine that greatly aids in penetration.

    This knife is super rare and if you don't know why, I'd suggest you pay close attention. The ONLY Busse HUCK Fin ever made and sold were the combat grade ones and that's with the CBT (Corrugated Bevel Technology)! This one is much thinner coming in on my micrometer at .19" which is super thin for a Busse Chopper. They did a Custom Full Height Convexed Hand Finished Satin Blade finished with a Very Fine V-Ground Edge. As for the Handle, the Busse Custom Shop went all out and did a Hand Smoothed Tan Canvas Micarta G-rexed Pine Cones in Clear Amber Resin Handle finished off with Solid Brass Bolts. If you look closely at the handle, there are metallic flakes in the 3D handle which really blends in with the color combination while really making it stand out. If you are looking for another one or a similar one, I want to wish you the best of luck with your search now! This is a "One of a Kind" and a truly beautiful piece of history. This is Brand New, never used, carried or sharpened.
    Sold
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,712
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Fatback Defenders Variant .32" Saber Hollow Ground Satin Blade w/swedge, Full Hand Smoothed Black Canvas Micarta G-rexed Alligator Tooth Matrix Bolstered Wood Handle w/German Nickle Silver Tubes
    Fatback Defenders - FD
    4.3" Blade Length 9.05" Overall Length 1.05" Blade Width .32" Blade Thickness 11.3 Ounces
    Custom Hand Ground Saber Hollow Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Full Hand Smoothed Black Canvas Micarta G-rexed Alligator Tooth Matrix Bolstered Wood Handle w/German Nickle Silver Tubes
    INFI Blade Steel at 58-60Rc with Small Choil, Swedge
    This is Brand New straight from the Busse Custom Shop! This Fatback Defender model with standard handles was available for sale starting April 27th 2016 through May 5th, 2016 and has been discontinued so can no longer be order from the Busse Combat.
    The original Public Defender was introduced by Jerry Busse in 2002. The Public Defender was a really cool knife with only a 4.5" blade at about .187" thick. This is about as close to a Tanto Blade as you were going to get from Busse Combat. Well, fast forward 14 years later, Busse takes the design and adds an Ergo Handle to the design and makes it in three versions. The versions are: Ergo Public Defender Limited Edition, the Ergo Public Defender Battle Grade and the thick version called Fatback Defender! Garth Reckner first introduced the Fatback Defender in Spring of 2016 and it has long since been discontinued. You will notice all Fatback Defenders were offered through the Busse Custom Shop and that is because these were all done by hand. The ones that were available for order have a custom Deep Hollow Ground Blade all done by hand. Well, this one is different and is a full blown custom and the Busse Custom Show wanted to change things up by also changing the blade. They put a sweep into the top spine and than added a swedge so less squared corners and so this one has better flowing lines. The Busse Custom Shop put a Deep Dish Hollow Ground Grind with a Hand Finished Satin Blade with a very fine V-Ground Edge on this beauty. Then they also went all out on the Handle with a Custom Full Hand Smoothed Black Canvas Micarta G-rexed Alligator Tooth Matrix Bolstered Wood Handle finished off with German Nickle Silver Tubes . This was a "One of a Kind" and you will never see another one like it. You can tell a lot of thought, planning and work went into making this beautiful knife. This is Brand New, never used, carried or sharpened. The last two pictures are comparison photos so you can see the difference of this variant compared to the normal Fatback Defender.
    Sold
     

Share This Page