1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 11th Thread

Liu Kang Oct 7, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Mini Vex .158" Saber Ground Forest Green Blade, Textured Olive Drab Green G10 Handle
    Mini Vex - MV
    3.5" Blade Length 7.7" Overall Length 1.2" Blade Width .158" Blade Thickness 6.1 Ounces
    Flat Saber Ground Forest Green Blade w/V-Ground Edge
    Textured Olive Drab Green G10 Handle
    SR101 Blade Steel with Full Size Choil
    This is Brand New directly from the 2017 Blade Show in Atlanta GA. The Mini Vex is no longer available for sale through the Swamp Rat Knife Company because it's Sold Out, and has been Discontinued!
    The Swamp Rat Knife Company decided to do something special for the 2017 Blade Show in in Atlanta GA so they made a few of these Mini Vex in a in the new Forest Green Coating just for the show. They only made a few in each color so get it before it's gone. There were only a few of these made by hand by the Custom Shop and I purchased this knife directly from the Swamp Rat Knife Company at that Show. This has a SR101 Steel that is .158" thick with a Flat Saber Ground Forest Green Blade w/V-Ground Edge which is Razor Sharp! This is the very first time they used the Forest Green blade. The color is beautiful and I think it should be called Emerald Green instead. This color blade goes very well with the Textured Olive Drab Green G10 Handle. This is a great little knife with a small handle that fits in the palm of your hand, great for things like skinning. This is Brand New, never used, carried or sharpened.
    Sold
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame Victory Cog Coin Brass, 3D Bronze Warrior Skull w/Ruby Eyes, Heat Treated Vintage Gunmetal (1 of 12) 08/2/18

    These are the newest Victory Coins by Steel Flame which has a Spinning Cog center with a 3D Bronze Warrior Skull with Red Eyes! This is Finished in our Signature Heat treated Vintage Gunmetal™. These have the Signature Screw bearing retention and O-ring base. They run on R188 One Drop bearings. Here is the newest spinner that has the newest fastest and quietest bearings made into a beautiful Victory Cog Coin. Very limited in production and quantity as I believe only 12 were ever made with this 3D Bronze Warrior Skull with Red Eyes.

    If you are looking at this, you probably know what you are looking at. This is a nicest Victory Cog Coin that is super high in demand. The reason for the demand is because of the quality and collectibility of everything Derrick/Leonard of Steel Flame . This Victory Cog Coin is Hallmarked "Steel Flame" and inside the circle of "Honor, Gratitude, & Respect" on the bottom as seen in the pictures. This spins freely without any problems. You can text me at the number listed below to see actual pictures of this spinning. This is Brand New, never carried or used. This does have a Black pouch, sticker and small zip lock back. This is a high quality and of the best craftsmanship. Everything will come as it came from directly from Steel Flame. Everything in the pictures is included. Here is your chance to own a beautiful piece of History!
    Sold
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Active Duty .195" Saber Ground Black Blade, Textured Red/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .195" Blade Thickness 6.4 Ounces
    .195" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Red/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is like New, never used, carried or sharpened.

    Sold
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Reate Massdrop X Tashi Bharucha Heat Seeker Prototype

    • Designed by Tashi Bharucha
    • Manufactured by Reate
    • Produced by Massdrop
    • Country of origin: China
    • Blade: Damasteel RWL34 stainless steel
    • Blade profile: Trailing point
    • Grind: Flat
    • Finish/coating: Satin and hand rub
    • Handle: Titanium
    • Handle finish: Bead-blast gray
    • Opening mechanism: Flipper tab
    • Lock: Frame lock
    • Pivot: Caged bearings
    • Pocket clip: 3D-milled titanium
    • Hardened steel lockbar insert, stop pin, and pivot barrel
    • Hardware: Torx T8 all around
    • Blade length (from tip of blade to forward-most aspect of handle): 3.7 in (9.4 cm)
    • Cutting edge: 3.5 in (8.9 cm)
    • Blade thickness (at spine): 4 mm
    • Blade thickness (1 mm behind apex): 0.5 mm
    • Handle length: 4.9 in (12.4 cm)
    • Handle width: 0.5 in (1.3 cm) without clip, 0.7 in (1.7 cm) with clip
    • Overall length: 8.5 in (21.6 cm)
    • Weight: 4.8 oz (136 g)
    This is Reate's second collaboration with Tashi Bharucha, the Heat Seeker is a production version of one of his most popular custom knives. From it's skeletonized, aggressively angled handle to its wide trailing-point blade, it’s instantly recognizable. However, this version is even stronger. Unlike traditional frame locks, there are no backspacers or standoffs to connect the two sides of the frame; they meet almost seamlessly at the spine for improved strength and ergonomics. The handle is milled with “heat vents,” which help reduce weight, promote a sure grip, and add a touch of signature Bharucha flair. And it’s no surprise a knife with this much swagger is made with premium materials. Look to the 3.7-inch Damasteel RWL34 blade to breeze through all kinds of slicing and piercing tasks.
    In terms of overall design, the Heat Seeker is as clean as it gets. In fact, the show side of the knife is pristine: aside from the pivot screw, all other screws are on the lock side of the knife and with the blade deployed, you can see right through the handle. This version of the Heat Seeker is just as easy to open as the original, too. The blade already rides on smooth caged bearings, and we added jimping to the flipper tab to facilitate a sure grip. You’ll find another modification in the blade shape. Instead of a slight recurve, we straightened out the edge for a more utilitarian profile. While you may want to put this beauty on display, you can carry it in a pocket by way of the right-handed tip-up clip.

    This knife is a prototype and was brought to the 2019 Blade Show in Atlanta Ga where my friend picked it up for me. I have gotten with Tashi Bhrucha about this exact knife where he did indeed verify that it is a prototype and the production version won't be available until August 2019. Pretty much what you see is what you get. You actually see the actual knife you are getting and not a stock photo. This one does not have a serial number and doesn't come with box, paperwork or pouch. You will get just the knife. Smooth opening action with early lockup. There is no blade play in any direction with a solid lockup. Nice blade centering. This will have one of the strongest warranties in the industry. This is Brand New, never used carried or sharpened. Please ask if you have questions or would like more pictures before purchase as all sales are final.
    buy it because you will probably never get another chance at it ever again.
    Traded
     
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Fat Killa Zilla II .31" Convexed Black Blade w/V-Ground Edge, Textured Magnum Black G10 Handle
    Killa Zilla II - KZII
    11.75" Blade Length 18.5" Overall Length 2.25" Blade Width (widest point) .29" Blade Thickness 32 Ounces
    Black Crinkle Coated Full Convexed Blade with V-Ground Edge
    Textured Magnum Black G10 Handle
    INFI Blade Steel, Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This is Brand New purchased directly from Busse Combat at the 2015 Spring Knob Creek Show in KY. The Killa Zilla II is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    These Killa Zilla were introduced by Jerry Busse in 2010 and have long been discontinued. These were made after they made the Killa Zilla Test Team. They got the feedback positive and negative and made the changes to make these models! This one is much thicker than the other ones I have seen, this one comes in at about .31" thick! The Black Crinkle coated Full Height Convexed Blade with V-Grind Edge is Razor Sharp! This has a Magnum Textured Black G10 Handle which goes perfectly with the Black Crinkle coated Blade. Not only is this a beautiful piece but it's fully functional and will handle anything you can throw at it. The V-Grind Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Rick Hinderer Re-Curve Sparrow 4th Gen XM18 3.5" Working Finish Flipper, Full WF Titanium Handle
    3.5" Blade Length 8.2" Overall Length 1.15" Blade Width .167" Blade Thickness 6.3 Ounces
    Triple Ground, Deep Hollow Ground Working Finish Re-Curve Sparrow Blade with V-Ground Edge
    Custom Hand Ground Working Finish Laser Engraved on a S35VN or CPM 3V Blade
    Working Finish (Stonewashed/Bead Blasted) Titanium Handle,
    Hinderer Working Finish Holey Titanium Pocket Clip
    Steel Flame Koi Superconductor Filler Tab
    Hinderer Copper Lockbar Stabilizer
    Hinderer XM18 Skull Etched Nuts Skull in Silver
    Working Finish (Stonewashed/Bead Blasted) Titanium Backspacers
    Working Finish 6AL4V (Stonewashed/Bead Blasted) Titanium Lock Side & Full Titanium Display Side Handle Scale
    4th Generation with with the stop pin next to the pivot.
    Rick Hinderer Custom Logo marked on the blade.
    This is Brand New directly from the Hinderer Lottery from the USN G8 Gathering Show in Las Vegas held on Friday Sept 2, 2016! This is beautiful rare and a full custom from a hand ground custom Hollow triple ground Re-curved Deep Hollow Ground Sparrow blade (with arrow on the upper swedge.) This is a "One of a Kind" and there is not another one like it in this world! This thing has ultra smooth flipping action with a solid early lockup with a centered blade. This has a full working finish (Sand Blasted and than Stonewashed) on the blade. I am guessing this has either a S35VN or a CPM 3V Blade. All the Hinderer Sparrow for Monkey Edge were all done with CPM 3V Blades but this could be using the S35VN steel that Rick Hinderer uses on most of his customs. But as of right now, the steel material has not been confirmed. The handle and parts are all matching from the Rick Hinderer Ranch which include Steel Flame Koi Superconductor Filler Tab, a Hinderer Copper Lockbar Stabilizer and Hinderer XM18 Skull Etched Nuts Skull in Silver to really make this look Beautiful! You can tell a lot of time and thought went into the making of this knife. This is exactly how it came directly from Rick Hinderer in this finish. This has a nice strong detent so the blade with fly out when the blade is engaged. This will come with a Hinderer Box, Zip lock baggie and tactical peanuts. This was never used, carried or sharpened! DEAD MINT
    Sold
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Knife Works Custom Shop Satin Ratmandu .165" Satin SR101 Blade, Textured Blue/Black G10
    5.25" Blade Length 10.35" Overall Length .165" Blade Thickness 9.3 Ounces
    SR101 Blade Steel
    Full Height Convexed Blade with a Hand Finished Satin Blade
    Textured Blue/Black G10 Handle
    SR101 Blade Steel with Choil
    This is Brand New directly from the 2012 Blade Show in Atlanta GA.
    This was a very few variations in Swamp Rat Ratmandu ever made and this is one of them! The Swamp Rat Custom Shop decided to do something special for the 2012 Blade Show in in Atlanta GA so they made this Ratmandu in a Full Height Convexed Blade and with the Satin Finish for the show. For those that do not know, the SR101 is super rare in a satin finish because if left uncoated, the steel may rust, but the Custom Shop did a full height convexed satin finish and really sanded all the pits and dimples from the steel so there are no microscopic pockets to collect moisture that would cost rust. There were only a few of these made by hand by the Custom Shop and I purchased this knife directly from the Swamp Rat Knife Company at that Show. This has a satin finish on a SR101 Blade that is .165" thick finished off with a convexed Edge which is Razor Sharp! This Satin blade goes very well with the Textured Blue/Black G10 Handle. This is a great medium sized knife with good length and weight. This is Brand New, never used, carried or sharpened. This knife will carry a lifetime warranty from Swamp Rat Knife Works! Here is your chance to own a beautiful piece of History!
    Sold
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Rick Hinderer Custom Grind 4th Gen XM18 3.5" Flipper, Blue Stonewashed Anodized Titanium
    3.5" Blade Length 8.2" Overall Length 1.1" Blade Width .165" Blade Thick 5.3 Ounces
    Custom Double Deep Hollow Ground Hand Finished Satin Blade with V-Ground Edge
    Olive Drab Green G10 Scale / Extra Matching Blue Anodized Stonewashed Finish Titanium Scale
    Satin Finished Blade with Rick Hinderer Custom Logo. Very few have ever had the Rich Hinderer Logo on the grind lines.
    Blue Anodized Stonewashed Finish Titanium Lock Side, Liner, Pocket Clip and Filler Tab!
    4th Gen with the Blade Stop next to the Pivot.
    Rick Hinderer Custom Logo marked on the blade.
    This is Brand New purchased directly from me at the the GTG in Feb of 2013 at the Hinderer Ranch.
    Here is a Super Rare Custom that was free hand ground by Rick Hinderer for the Get Together at the Hinderer Ranch. This one was hand picked by me as I was the first one to win in that lottery. This Custom Grind was done free hand and may look similar to a dagger grind but if you like at a spine shot of the blade, it is not a sharpened top edge and actually widens back out so it's a thicker stronger tip! This has a smooth opening action, Solid early lockup with a centered blade. This has a nice strong detent so the blade with fly out when the blade is engaged. This will come with a Hinderer Box autographed by Rick Hinderer at the GTG in Feb of 2013 which is where this knife is from, Zip lock baggie and tactical peanuts. Dead Mint, Unused/Un-carried & Dead Mint Condition. I believe there are only two of these grinds that exist. The top edge is NOT sharpened! I personally won this knife at that Get Together and was the very first to pick from the offerings, so this was the best one! The extra Full Blue Anodized Stonewashed Finish Titanium Matching Scale is included in this listing! This was never used, carried or sharpened! DEAD MINT!
    Sold
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop MOABM .41" Flat Ground Satin Blade, Textured Magnum Blue/Black G10 Handle (1 of 27)
    MOABM - Mother Of All Battle Mistresses10" Blade Length 16.25" Overall Length 2.15" Blade Width .41" Blade Thickness 38.3 Ounces
    Flat Ground Hand Finished Satin Blade with V-Ground Edge
    Textured Magnum Blue/Black G10 Handle
    This is pre-0wned from a Private Party who purchased this Brand New directly from the Busse Combat Custom Shop and was than kept as a safe queen. There were only 27 of these ever made and they were only available for the 2015 MemorialDayGanzaaa! The MOABM has been discontinued and have been Sold out so get this now while you can!

    The MOABM - Mother Of All Battle Mistresses was introduced by Jerry Busse in 2015 and has long been since discontinued. This knife is pretty much the Flat Fat Fusion Battle Mistress is most commonly known as the FBM LE except they used a old school original MOAB thick blank to start. So if you thought the FBM LE was a sweet knife, this one would blow that one away in comparison. And to have a production model that was limited to only 27 being made is insane! There were so many more people looking for this knife than was available. They all have the .41" Thick INFI Thick Steel with a Hand Finished Satin Blade with the V-Ground edge that was razor sharp. But for the handle, there were two colors available in Canvas Micarta and for $85 more, you can choose from 6 dual color G10! The winner of this knife chose to go with a Textured Magnum Blue/Black G10 Handle This is Brand New: never been used, carried, sharpened. INFI is a proprietary Steel is used ONLY by Busse Combat and is Legendary! This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE and a MUST Have for any Busse Collector!
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat NMSFNO .27" Black Crinkle Blade, Magnum Non-Textured Tigerhide Canvas Micarta Handle
    NMSFNO - Nuclear Meltdown Special Forces Natural Outlaw
    8.25" Blade Length 14.2" Overall Length 1.75" Blade Width .27" Blade Thickness 21.5 oz.
    Black Crinkle Coated Full Height Convexed Blade with V-Ground Edge
    Magnum Non-Textured Tigerhide Canvas Micarta Handle
    INFI Blade Steel with Full Size Choil, Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This knife is Brand New direcdtly from 2015 Blade Show in Atlanta Ga! The NMSFNO - Nuclear Meltdown Special Forces Natural Outlaw is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The NMSFNO was introduced in 2008 by Jerry Busse and have since than been discontinued. This is one of the most popular models that Busse has made and really in high demand by collectors. This is one of the two most voted as #1 choice of Busse knives if you can have only one Busse, so it says a lot. I purchased this knife directly from Busse Combat at the 2015 Blade Show. They must have found two or three blanks left over so they made these very special ones just for the show. This has a INFI Steel that is .27" thick with a Black Crinkle Coated Blade! What is so very special about this particular knife is the handle. This is the very first time I have seen Magnum Tigerhide with non-textured handles. It's hard to explain, it's not rounded like the hand shaped, it's sort of a flat cut so you can see the colors of the tigerhide much better. These do have small lines in them so they are textured but not like the ones that many Busse Collectors are used to. I think it's beautiful because it really brings out the color of the handle! The Convexed Ground Blade with V-grind Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold
     
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Michael Raymond Estrella XHP Core San Mai Damascus (Nichols) Blacklip Pearl Inlay Pin
    3.3" Chad Nichols CTS-XHP Core San Mai Damascus Blade Length
    7.8" Overall Length
    .13" Blade Thickness
    1" Blade Width
    3.825 Ounces
    Black Lip Mother of Pearl Inlay Pivot Pin
    Handle Material 6AL-4V Titanium Integral
    This is Brand New from the maker with box and all paperwork and tool. There were only three Estrella made with the XHP Core San Mai Damascus and I owned all three. Two were sold so this is the last one. These were special orders custom to my specification. For those that do not know, the handle starts with one solid piece of 6AL-4V Titanium and is milled out and custom made to what you see before you. A lot of time and work goes into making this piece of art. This is Brand New: Never used Carried or Sharpened. This has a Solid lockup with a smooth opening Centered Blade! I talked to Michael Raymond at the Blade 2015 Show and he is no longer making the Extrella anymore so get this while you can! This comes from my personal collection and I purchased this directly from Michael Raymond. This will come with the box, Date of Birth Card, Business Card, Tool, Ribbon, and wrapping.
    Sold
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat FFBM .32" Black Crinkle Saber Ground Blade, Magnum Textured Red/Black G10 Handle
    FFBM - Fat Fusion Battle Mistress
    10" Blade Length 16.25" Overall Length 2.1" Blade Width .32" Blade Thickness 33.7 Ounces
    Black Crinkle Coated Saber Ground Blade with Polished Convexed Edge
    Magnum Textured Red/Black G10 Handle
    INFI Blade Steel, Full Size Choil, Black Para-cord D-Guard
    This is like in Excellent Condition, Never Used or Carried but previous owner did sharpen the edge with an Edge Pro to a mirror like polished Edge. He also put on a custom Black Para-cord D-Guard should this be used, it won't slip out of the hand. These FFBM - Fat Fusion Battle Mistress are discontinued and have been Sold out so get this now while you can!

    The Combat Grade Fusion Battle Mistress was introduced by Jerry Busse in 2006 and has long been since discontinued. At that time, the FFBM was sold in certain specific color combinations only and only through the Busse Company Store! I believe this is the knife that really got Busse to where it is today. I believe this one was released in 2007. Noss decided to test this knife on knifetest.com and the results were incredible and since than, everyone from around the world has wanted to own a FFBM! This knife has the Saber Ground Black Crinkle coated INFI Blade with the V-Ground Edge! This has the Magnum Textured Red/Black G10 Handle which is great for strength and Durability for the material and performs will with great grip and non slip use. Because the first owner sharpened this and added a D-guard, I am listing this as used and so this is being sold as is. Excellent Condition for one the the best models to ever come from Busse Combat. This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE and a "MUST Have" for any Busse Collector!
    Sold
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,642
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Custom Shop Nuclear Sus Scrofa Variant .18" Black Flat Ground Blade w/Sharpened Curved Spine, Textured Orange G10 Handle
    Sus Scrofa - SS
    4.65" Blade Length 2.3" Sharpened Top Edge 8.85" Overall Length .18" Thick 6.4 Ounces
    Flat Ground Black Crinkle Coated Blade with V-Ground Edge
    Textured SOS Orange G10 Handle
    INFI Blade Steel with Large Choil
    This knife is Brand New directly from the Fall Knob Creek 2015 Show. The Sus Scrofa is no longer available for sale through the Busse Combat and has been Discontinued for a long time now!

    The Sus Scrofa was introduced by Busse Combat in 2007 and has long been discontinued. This is a highly modified variant that was purchased directly from Busse Combat at the Fall Knob Creek 2015 Show. This is a very special and "One of a Kind" custom that the Busse Custom Shop made that is not only Beautifully SICK but is fully functional! This is a highly modified variant that was made just for the Fall Knob Creek 2015 Show. This has a INFI Steel that is .18" thick Black Coated with a V-Ground Edge on both the primary and on the sharpened top edge! This is a very special and "One of a Kind" custom that the Busse Custom Shop made and may look weird but is fully functional! The top un-sharpened portion of the spine of the blade is perfect to put your thumb to apply more pressure to whatever you are slicing or cutting. This also has a larger functional choil if you wanted to choke up on the knife and the handle has been reshaped to fit in the hand better with way to grip this knife. The Butt of this knife also has been shorten and modified to accommodate for the new way to hold this knife. This also has a modified re-shaped Skull Crusher Butt which shortens the overall length. I love the shape and grind on this custom, it's very aggressive! The V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold
     

Share This Page