1. **ATTENTION ALL DEVILS** If you are still having trouble logging in (Resetting your password should do "the trick") OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 11th Thread

Liu Kang Oct 7, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CS531 Busse Combat Custom Shop Anniversary MoJo .257" Saber Ground Satin Blade, Hand Shaped Black G10 G-rexed Olive Green/Black G10 Bolstered Desert Ironwood Handle w/Mosaic Pins
    Anniversary MoJo - AM
    8.15" Blade Length 14.25" Overall Length 1.65" Blade Width .257" Blade Thickness 20.5 Ounces
    Saber Ground Hand Finished Satin Blade w/Blended Convexed Edge
    Custom Contoured Hand Shaped Black G10 G-rexed Olive Green/Black G10 Bolstered Desert Ironwood Handle w/Mosaic Pins
    INFI Blade Steel, Full Size Choil, Swedge
    This one is Brand New from the knife shows Busse Combat attended! These Anniversary MoJo are not being sold by Busse Combat any more and have been Sold out and discontinued!

    The Anniversary MoJo was introduced in December of 2012 and have since been discontinued. This is a true Custom and very RARE knife made by the Busse Custom shop! The earlier original models introduced by Jerry Busse in 2001 with the Ergo Handles of these was called "Mr. MoJo" and the hook was there for a blade catcher as this was a combat fighting knife! Each of these are hand made with hand picked and custom Hand-Shaped Matched Handle with Finger Grooves! This one has a Custom Contoured Hand Shaped Black G10 G-rexed Olive Green/Black G10 Bolstered Desert Ironwood Handle finished off with Mosaic Pins. This has a INFI Steel that is .257" thick Satin Finish with a razor sharp w/Blended Convexed Edge! INFI is a proprietary Steel is used ONLY by Busse Combat Knives. Backed 100% with Lifetime Warranty from Busse Combat! Dead Mint never used, carried or sharpened. This knife was purchased directly by me from Busse Combat and than spent it's life in a safe.
    Sold
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat 2nd Gen Badger Attack Ergo .235" Saber Ground Hammered Silver Blade, Textured Magnum Black Canvas Micarta Handle
    2nd Gen SHE - Second Generation Steel Heart Ergo
    4.8" Blade Length 10.2" Overall Length 1.55" Blade Width .235" Blade Thickness 13.3 Ounces
    Flat Saber Ground Hammered Silver coated Blade with a V-Ground Edge
    Textured Magnum Black Canvas Micarta Handle
    INFI Blade Steel, Small Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. This is special as it uses the Hammered Silver coating that was not an option when this was available for orders and was done as an exclusive for the 2017 Blade show. This Model was available for "Operation Two Weeks" starting December 23, 2015 through December 28, 2015 and has been discontinued so can no longer be order from the Busse Company Website!
    The Steel Heart E - SHE was introduced by Jerry Busse in 2001 and has since been discontinued. Many didn't think it looked well but those that have handled it know the ergo handle felt great in the hand and the INFI steel would handle anything you can put it through.
    In 2015 Jerry Busse introduced the 2nd Gen Badger Attack Ergo saying this:

    The Second Generation Badger Attack E is a complete redesign. Whereas the original BAE had the same handles, choil and blade width as the Steel Heart E, this entire platform has been downsized, making it a perfect dayhiker and EDC for places where 5" is the maximum blade length. The blade is robust enough to handle anything you can throw at it while maintaining excellent blade geometry for cutting and slicing.

    It was part of "Operation Two Weeks" and was available for pre-order at that time. The catch was this was only available in Combat Grade meaning INFI steel but with a coating. But for the 2017 Blade Show, Busse Combat must have had some of these blanks left over and did something special and coated these with the Hammered Silver. It was not an options that you could choose when these were available for order. There were also not many of these made in these colors so these are super rare. This has a Flat Saber Ground Hammered Silver Blade with a very sharp V-Ground Edge which is Razor Sharp! This is the very first time they used the Hammered Silver coating on this model. The color is beautiful that shows different colors at different angles as it looks shiny if you look at it from the side. This color blade goes very well with the Textured Magnum Black Canvas Micarta Handle. This is Brand New, never used, carried or sharpened.
    Sold
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Short American Butaniku Sword .26" Saber Ground Black Crinkle Blade w/Fuller, Textured Orange/Black G10 Handle
    Short American Butaniku
    23.7" Blade Length 35.9" Overall Length 1.2" Blade Width .26" Blade Thickness 41.4 Ounces
    Flat Saber Ground Black Crinkle Blade with Fuller and V-Ground Edge
    Textured Orange/Black G10 Handle
    INFI Blade Steel, Full Size Choil, and Fuller (Blood Groove)
    This was Brand New purchased directly from the Busse Combat at the 2015 Blade Show in Atlanta Ga! The Short American Butaniku has been discontinued and can not be ordered from Busse so get this rare Grail Sword now!

    This Short American Butaniku Sword is a beautiful knife made by Busse Combat Custom Shop. This model was made because some people thought that the full size Butaniku was too long and heavy. So after much feedback from many people on the forums, the Busse Combat Custom Shop created this beauty. I think many would say that the weight and balance of this sword is much better now. The problem is that this was never a production Sword, only a few of these were ever made and only to shows and some online ganzas. This has a Black Crinkle coated Saber Ground Blade with a V-Ground Edge with a fuller (Blood Groove.) This particular knife was purchased by me directly from Busse Combat so nobody else has handles this except me. This has a Textured Orange/Black G10 Handle. This color combination is very popular and referred to by Busse Collectors (HOGS) as "Pumpkin!" This is Brand New: never used, carried or sharpened.
    Sold
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop War Train Fusion WTF Battle Grade .295" Saber Ground Black Crinkle Blade, Textured Magnum Orange/Black G10 Handle
    WTF BG - War Train Fusion Battle Grade
    11" Blade Length 17.25" Overall Length 2.75" Blade Width .30" Blade Thickness 37 Ounces
    Saber Ground Black Crinkle Coated Blade with V-Ground Edge
    Textured Magnum Orange/Black G10 Handle
    SR101 Blade Steel, 58-60Rc with Choil
    This is Brand New purchased directly from Busse Combat. This War Train Fusion Battle Grade Model was available for sale starting January 27, 2016 and was discontinued about two weeks later so can no longer be order from the Busse Company Website because it's Sold Out, and has been Discontinued!
    These War Train Fusion were introduced by Jerry Busse in 2016 and have long been discontinued. This was based on one of his designs from the 80's with an updated Fusion Handle. There was two options, you can either purchase with a thicker INFI blade with a Hand Finished Satin Blade or get it with a coated SR101 that was slightly thinner at less than 1/3 the cost of the thick Satin INFI! As part of "Operation 2 Weeks" it won't be around for long but I have little doubt that it will be our fastest selling Battle Grade to date! These "Sold Out" in only a few days! This one has a Saber Ground Black Crinkle Coated Blade with V-Ground Edge! This has a Textured Magnum Orange/Black G10 Fusion Handle. This monster blade is capable of moving anything in its way! The V-Grind Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold
     
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Gladius .295" Convexed Satin Blade, Hand Smoothed Olive Green/Black G10 Handle
    Gladius
    15.15" Blade Length 23.20" Overall Length 1.75" Blade Width .295" Blade Thickness 37 Ounces
    Double Edged Convexed Hand Finished Satin Blade with Zero Edge with a Doublecut Fuller
    Satin Blade with a Doublecut Fuller
    Hand Smoothed Olive Green/Black G10 Handle
    INFI Blade Steel, Fuller (Blood Groove)
    This is Brand New just received back directly from Busse Combat Custom Shop. These "Gladius" sword models are discontinued and have been Sold out since 2010!
    This was introduced by Jerry Busse in the summer of 2010 and has long since been discontinued! This was a very Limited Production Run Busse by the Combat Custom Shop that you could pre-order them at the 2010 Blade Show and than a online Ganza that followed but that was it. This has a Double Edged Convexed Satin Blade with Zero Edge is Razor Sharp all hand finished to a satin Blade with a Doublecut Fuller down the middle! This one has been made with the Hand Smoothed Olive Green/Black G10 Handle. These beautiful sword is a MUST have for any Busse collector and lots of times is their ultimate "Holy Grail!" I purchased this directly from Busse Combat! This has a INFI Steel that is .295" thick with a Beautiful Satin Finish! This still has the original Full Height Convexed edge that is razor sharp! This one is brand new, never used, carried or sharpened.
    Sold
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Gladius .287" Convexed Satin Blade, Hand Smoothed Black/Tan G10 G-rexed C-Tek Green Resin Infused Aluminum Honeycomb Bolstered Green Buckeye Burl Handle w/German Nickle Silver Tubes
    Gladius
    15.15" Blade Length 23.20" Overall Length 1.75" Blade Width .287" Blade Thickness 2 Pounds 5.9 Ounces
    Double Edged Convexed Hand Finished Satin Blade with V-Ground Edge with a Doublecut Fuller
    Custom Hand Smoothed Black/Tan G10 G-rexed C-Tek Green Resin Infused Aluminum Honeycomb Bolstered Green Buckeye Burl Handle w/German Nickle Silver Tubes
    INFI Blade Steel, Fuller (Blood Groove), Nuclear Meltdown Treatment on the Spine and Edges (rounded edges)
    This is Brand New directly from Busse Combat Custom Shop. These "Gladius" sword models are discontinued and have been Sold out since 2010!

    This was introduced by Jerry Busse in the summer of 2010 and has long since been discontinued! This was a very Limited Production Run Busse by the Combat Custom Shop that you could pre-order them at the 2010 Blade Show and than a online Ganza that followed but that was it. But this one is not your standard Satin Gladius, this one was made special by the Busse Custom Shop and that's rare because there have not been many ever made. This has a Double Edged Convexed Satin Blade with V-Ground Edge which is Razor Sharp all hand finished to a satin Blade with a Doublecut Fuller down the middle! This one has been made with a Custom Hand Smoothed Black/Tan G10 G-rexed C-Tek Green Resin Infused Aluminum Honeycomb Bolstered Green Buckeye Burl Handle Finished off with German Nickle Silver Tubes. These beautiful sword is a MUST have for any Busse collector and lots of times is their ultimate "Holy Grail!" I purchased this directly from Busse Combat! This has a INFI Steel that is .287" thick with a Beautiful Hand Satin Finish! This still has the original V-Ground Edge that is razor sharp! This one is brand new, never used, carried or sharpened.
    Sold
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Team Gemini .26" Saber Ground Satin Blade, Textured Olive Green G10 Handle
    Team Gemini - TG
    7.75" Blade Length 13.3" Overall Length .26" Blade Thickness 21 Ounces
    Saber Ground Satin Blade with a Blended Convexed Edge
    Magnum Textured Olive Green G10 Handle
    INFI Blade Steel, Full Size Choil with Swedge
    This is Brand New from the Blade 2014 Show in Atlanta Ga! The Team Gemini is no longer available for sale through the Busse Combat website because it has been Discontinued!

    The Team Gemini was introduced in 2012 by Jerry Busse and have since been discontinued. This was a very few of these made Busse Combat Exclusively for Blade 2014. This is the first and only time that Busse Combat has ever offered the Team Gemini with a full Hand Finished Satin Blade! I purchased this knife directly from Busse Combat at the Blade 2014. This has a INFI Steel that is .26" Thick with a Hand Finished Satin Blade! The Blended Convexed Edge is Razor Sharp! This Olive Green G10 were never available as an option to be ordered. INFI is a proprietary Steel is used ONLY by Busse Combat! This is Brand New, never used, carried or sharpened.

    Sold
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Nuclear Hell Razor .20" Black Crinkle Saber Ground Blade with Sharpened Top, Magnum Textured Orange/Black G10 Handle
    Hell Razor - HR
    6.75" Blade Length 12.45" Overall Length 1.75" Blade Width .20" Blade Thickness 15.7 Ounces
    4" Sharpened Top Spine w/4 Teeth (Serrations)
    Saber Ground Black Crinkle Coated Blade with V-Ground Edge
    Magnum Textured Orange/Black G10 Handle
    INFI Blade Steel, Full Size Choil with and No CBT (Corrugated Bevel Technology)
    This is Brand New purchased directly from Busse Combat at the 2014 Fall Knob Creek Show in KY. The Hell Razor Model has been discontinued so can no longer be order from the Busse Company Website! This is Brand New purchased directly from Busse Combat.

    Back in 2005 when the Hell Razor was introduced by Jerry Busse, all of the Hell Razor models came with the CBT (Corrugated Bevel Technology) except for the few Mud Razors that were produced. All of the Hell Razors Models have long since been discontinued even thought many people loved this model. There were only a few variants of these made without the CBT (Corrugated Bevel Technology), and this one is one of them. This is even more special because it has a free hand ground Sharpened Front Top Edge with Teeth or otherwise known as serrations. The Busse Custom Shop must have found a blank laying around and custom make this one special. This Nuclear Hell Razor has a very sharp custom Top edge with Serrations. This one has a custom Free Hand Ground Custom Hollow Ground Sharpened Top Edge on the front of the blade. This is a one of a Kind Custom Made Knife for the Hardcore Busse Collector! The handles are Magnum Textured Orange/Black G10 Handle. This Blade is a bit thicker than the original Hell Razor which only makes it much more of a Heavy Duty Blade. This was purchased directly from Busse Combat by myself and is Brand New: never used, carried or sharpened.
    Sold
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Park Ranger .146" Flat Saber Ground Satin Blade, Hand Smoothed Full Buffalo Horn Handle w/Solid Brass Bolts & Black Liners
    Park Ranger - PR
    4" Blade Length 8.45" Overall Length 1.2" Blade Width .146" Blade Thickness 5.8 Ounces
    Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Smoothed Full Buffalo Horn Handle w/Solid Brass Bolts & Black Liners
    INFI Blade Steel with Small Choil
    This is Brand New purchased directly from Busse Combat from the 2018 Blade Show in Atlanta Ga. The Park Ranger is no longer available for sale through the Busse Combat. This was part of "Operation Two Weeks" which was from 9/20/17 to 9/23/17 and has been Sold Out and now Discontinued!
    The Park Ranger was introduced by Jerry Busse in 2017 and has since been discontinued. Here is what Jerry had to say about this model:
    Busse Combat is proud to introduce this thin EDC with a very ergonomic, full-length handle. It features a thinly ground drop point blade that makes it perfect for use as a skinner or EDC. It is available in a variety of blade finishes, steel choices, and handle options. The Park Ranger is being offered in both INFI and SR-101 steel in a wide, saber ground platform, making it tough enough to handle whatever you throw at it.
    The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made and no customs were available during the . I purchased this Custom Shop knife directly from Busse Combat at the 2018 Blade Show in Atlanta Ga. This has a INFI Steel that is .146" thick with a Satin Finish done by hand! The handle is Custom Hand Smoothed Full Buffalo Horn Handle w/Solid Brass Bolts finished off with Black Liners! This is Beautiful and feels great in the Hand because it's been contoured and shaped to fit in the palm of your hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This one is new and a RARE Super Find because Busse Combat didn't even have any tables at 2018 Blade show and was there only for the induction dinner with Grab Bags! This is Brand New, never used, carried or sharpened.
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Basic 8 CG .24" Flat Ground Tanker Grey Blade, Black Resiprene C Handle
    Basic 8 CG - Basic 8 Combat Grade
    8.15" Blade Length 13.15" Overall Length .23" Blade Thickness 13.175 Ounces
    Flat Ground Tanker Grey Blade with a V-Ground Edge
    Black Resiprene C Handle
    INFI Blade Steel with a Full Size Choil
    This is Brand New from the 2015 Blade Show in Atlanta Ga. The Basic 8 model has been discontinued so can no longer be order from the Busse Combat!

    The Basic 8 Limited Edition was just introduced and already has been discontinued. This is the same knife but it's coated so a tad bit thicker, and because of finishing the INFI blade to a satin finish, they coated the blade which in Busse terms is called Combat Grade and thus more affordable for those that would like to use it instead of collecting it. The Basic 8 LE in a thick .23" thick was only available in a Ganza and are already all sold out, this was only available at the Blade 2015 show and were sold out also! This is Brand New, never used, carried or sharpened.
    Sold
     
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Busse Combat Team Gemini Medium .24" Flat Saber Ground Sage Crinkle Blade w/Fuller, Textured Magnum Black Canvas Micarta Handle
    Team Gemini Medium - TGM LB
    6.3" Blade Length 11.8" Overall Length 1.55" Blade Width .24" Blade Thickness 16.07 Ounces
    Flat Saber Ground Sage Crinkle Coated Blade with V-Ground Edge
    Textured Magnum Black Canvas Micarta Handle
    INFI Blade Steel, Large Choil, Swedge
    This is Brand New purchased directly from Busse Combat. The Team Gemini Medium has long been discontinued and is no longer being made so get this while you can!
    The Team Gemini Medium were introduced in 2012 Blade Show by Jerry Busse and have long since been discontinued! The TGM has received the Light Brigade treatment and is a powerful and stout blade designed for the rigors of combat. This was not an actual production, you could pre-order this model at the 2012 Blade Show, very few showed up at the 2015 Blade Show with Cerakote coating and they did make a small short order November of 2015 for "Operation Two Weeks!" I purchased this knife directly from Busse Combat so in Brand New Condition. This has a INFI Steel that is .24" Thick with a Sage Crinkle coating! The Flat Saber Ground Blade with V-Ground Edge is Razor Sharp! This has a Textured Magnum Black Canvas Micarta Handle. This is Brand New, never used, carried or sharpened.

    Sold
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Team Gemini Medium .235" Flat Saber Ground Black Crinkle Blade w/Fuller, Textured Magnum Black/Red/Grey G10 Handle
    Team Gemini Medium - TGM LB
    6.3" Blade Length 11.8" Overall Length 1.55" Blade Width .235 Blade Thickness 17 Ounces
    Flat Saber Ground Black Crinkle Coated Blade with V-Ground Edge
    Textured Magnum Black/Red/Grey G10 Handle
    INFI Blade Steel, Large Choil, Swedge
    This is Brand New purchased directly from Busse Combat. The Team Gemini Medium has long been discontinued and is no longer being made so get this while you can!
    The Team Gemini Medium were introduced in 2012 Blade Show by Jerry Busse and have long since been discontinued! The TGM has received the Light Brigade treatment and is a powerful and stout blade designed for the rigors of combat. This was not an actual production, you could pre-order this model at the 2012 Blade Show, very few showed up at the 2015 Blade Show with Cerakote coating and they did make a small short order November of 2015 for "Operation Two Weeks!" I purchased this knife directly from Busse Combat so in Brand New Condition. This has a INFI Steel that is .235" Thick with a Black Crinkle coating! The Flat Saber Ground Blade with V-Ground Edge is Razor Sharp! The Textured Magnum Black/Red/Grey G10 Handle was not an option color that could be ordered which makes this very special. This is Brand New, never used, carried or sharpened.

    Sold
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Busse Combat Battle Saw CG .25" Flat Ground Black Crinkle Blade w/CBT, Magnum Textured Red/Black/Grey G10 Handle
    Battle Saw Combat Grade - BSCG
    11" Blade Length 16.5" Overall Length 2" Blade Width .25" Blade Thickness 23.4 Ounces
    Flat Ground Blade with CBT (Patented Corrugated Bevel Technology) and V-Ground Edge
    Magnum Textured Red/Black/Grey G10 Handle
    INFI Blade Steel, CBT (Patented Corrugated Bevel Technology), Large Choil
    This is Brand New and part of the "Operation 2 Weeks" which started October 14, 2015 and ended October 20, 2015. They have stopped producing this model so get this while you still can.
    This knife was inspired by a saw tooth monster Jerry Busse made back in the early 80's and is built on the foundation of the legendary Straight Handled Battle Mistress. Jerry Busse tried to have this for Blade 2015 but was not ready in time so decided to introduce this as part of the "Operation 2 Weeks" which started October 14, 2015 and ended October 20, 2015. So this was a very short run and there were not that many made. The only option was the color of the coating and handle material options. The V-Ground Edge on this knife is Razor Sharp! The Magnum Textured Red/Black/Grey G10 handles you see on this knife cost an additional $85 as an option. INFI is a proprietary Steel is used by Busse Combat knives and is Legendary! This knife will carry a lifetime warranty from Busse Combat! This one is was purchased from Busse Combat as part of the "Operation 2 Weeks." Brand New, Never Used, Carried or Sharpened!

    Sold
     
    Last edited: Mar 23, 2019
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Richard Rogers Custom Axiom, CTS-XHP Blade, Grooved Carbon Fiber Handles
    3.4" Blade Length 8.15" Overall Length .9" Blade Width .16" Blade Thickness 4 Ounces
    Saber Ground Blade with a Fine V-Ground Edge
    3D Grooved Carbon Fiber Handles with Titanium Liners
    CTS-XHP Blade Steel, Swedge, Small Choil, Blue Anodized Fittings
    This was Brand New directly from the 2017 Blade Show in Atlanta Ga!

    Richard Rogers has been making knives since 1996. My latest designs and direction have been into gentlemen’s tacticals.
    Richard wanted something that was a little bit bigger than the Vectorthus, we have The Axiom!
    The handles are Grooved Carbon Fiber Handles, blade material is CTS-XHP, and the Ti screws, pivot, liners and clip have been anodized blue. Inside on the liners is the newly marked serial number. And the R logo is on the flipper tab. This knife was introduced into the lineup in June of 2015. The "Rogers" name and Log is on the inside of the Blasted Titanium Liners. This is Brand New directly from the Blade 2017 from the Saturday lottery! This has a ultra smooth flipping action with a centered blade and early lockup. This will come with the knife cloth and Certification of Authenticity card. Here is your chance to own a beautiful piece of History! This is Brand New: never used, carried or sharpened.
    Sold
     
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    Buy Brown Black Pancake Style Kydex Sheath for the Busse Gladius Sword
    Here is a custom Black Kydex Sheath made by David Brown of Buy Brown Kydex Sheath. This was made to fit the Busse Combat Gladius Sword. This was made for the Combat Grade or coated Gladius sword but I'm sure this will also fit the satin blades. I will warn you this sheath may scratch your satin blade finish though or may cause smoothing on your coated sword, so please keep this in mind when you purchase. As you can see, there is a drain hole on the bottom should it have liquid or collect moisture and the hole will allow the water to escape. It is pre-owned in excellent condition as you can see from the pictures.
    Sold
     
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Short American Butaniku Sword .26" Saber Ground Black Crinkle Blade w/Fuller, Textured Blue/Black G10 Handle
    Short American Butaniku
    23.75" Blade Length 36" Overall Length 1.7" Blade Width .26" Blade Thickness 42.3 Ounces
    Saber Ground Black Crinkle Coated Blade with Fuller and a V-Ground Edge
    Textured Blue/Black G10 Handle
    INFI Blade Steel with Choil
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe the only one in this color combo at the show! The Short American Butaniku model has been discontinued so can no longer be order from the Busse Combat so get this while you can.

    The American Butaniku Sword is a beautiful Sword made by Busse Combat Custom Shop. This model was the longest production sword ever made by Busse Combat in it's history! Jerry Busse introduced this beautiful sword on June 7, 2012 and the prototype was brought to The Blade 2012 Show for HOGs to handle and fondle. Each and everyone one is made by the Busse Combat Custom Shop. This is the Short American Butaniku Sword which is a beautiful sword modified by Busse Combat Custom Shop to be shorter and better balanced. This model was made because some people thought that the full size Butaniku was too long and heavy. And so the Busse Combat Custom Shop created this beauty. I think many would say that the weight and balance of this sword is much better now. The problem is that this was never a production Sword, only a few of these were shows and ganzas. This has a V-Ground Edge that is razor sharp. This particular Sword was purchased by me directly from Busse Combat at the Blade 2015 Show. This is Brand New: Never Used, Carried or Sharpened!
    Sold
     
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat RMD Infidu .17" Saber Ground Satin INFI Blade, Textured Black Canvas Micarta Handle
    Ratmandu - RMD
    5.25" Blade Length 10.3" Overall Length .17" Blade Thickness 9.4 Ounces
    Saber Ground Hand Finished Satin Blade w/Blended Convexed Edge
    Textured Black Canvas Micarta Handle
    INFI Blade Steel with Full Size Choil
    This is Brand New directly from the 2014 Blade Show in Atlanta GA. The Infidu is no longer available for sale through the Swamp Rat Knife Company because it's Sold Out, and has been Discontinued!
    The Swamp Rat Knife Company decided to do something special for the 2014 Blade Show in in Atlanta GA so they made a few of these Ratmandu in a Hand Finished Satin INFI Blade just for the show. They only made a few in each color so get it before it's gone. There were only a few of these made by hand by the Custom Shop and I purchased this knife directly from the Swamp Rat Knife Company at that Show. This has a INFI Steel that is .17" thick with a Saber Ground Hand Finished Satin Blade w/Blended Convexed Edge which is Razor Sharp! The Satin Blade goes perfectly with the Textured Black Canvas Micarta Handle. This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives and was never available for this model Swamp Rat Ratmandu before. This knife will carry a lifetime warranty from Busse Combat! Here is your chance to own a beautiful piece of History!
     
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame Koi Sledge Ring, Stainless Steel with Heat Treated Vintage Gunmetal
    1.8" Length 1.35" Width .47" Thick 78 Grams
    This is the Sledge Ring etched with the Koi fish Finished with a Heat treated Vintage Gunmetal on a Stainless Steel milled ring. These Sledge Ring were just introduced and have not been out long but are very high in demand. Everyone that I know that has handled one says they fit the finger so very well and were surprised and I have to agree. This is extremely because of the super low amount made. There were a few made just for the 2018 Blade Show in Atlanta Georgia. Finished in our Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity.

    If you are looking at this, you probably know what you are looking at. This is a Sledge Ring that is super high in demand. The reason for the demand is because of the quality and collectibility of everything Derrick/Leonard of Steel Flame . The ring itself is etched with two Koi fish on each end for a total of 4 on one side and on the other side, there is another two on one side and on the other is and "Steel Flame" on the back. This is a high quality and of the best details and craftsmanship. This is pretty thick and comes in on my micrometer at .47"! That's almost half an inch thick! This is a pretty solid piece with some good weight to it at 78 grams. This only chance you have of owning one of these prized pieces with with this Koi logo in this steel. This is Brand New as I purchase this directly from Steel Flame at the 2018 Blade Show in Atlanta Ga! Everything will come as it came from directly from Steel Flame which is a small air tight zip lock baggie, Black Nylon Velcro sheath with Steel Flame White Koi patch. Everything in the pictures is included. Here is your chance to own a beautiful piece of History!
    Sold
     
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame XL 3D Darkness Skull in Bronze Pendent with Double Bail
    weight is about 27 grams
    This is one of the coolest accessories you can wear on your chain to show you are a Steel Flame collector. This is a Highly Detailed XL 3D Darkness Skull in Bronze with the Double Bail to fit on your chain brought to you by Steel Flame. This is extremely rare because of the super low amount made. This is an older model that I have not seen them make in a good while so its rare to see this one around. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to make the statement you are trying to show everyone.
    Authentic Steel Flame XL 3D Darkness Skull is highly detailed and done in Bronze. Steel Fame makes a few different skulls and this one is the Darkness Skulls which has the Jawbone. Because this is Bronze, it has developed some nice some natural patina which really gives it the color you want. Only serious collectors would appreciate the rarity of this piece. On the back, you will see it is hallmarked "Steel Flame" logo and "USA" so you know this is authentic. I'm not sure if they made these pendents in different sizes but this one is about the XL in my opinion. This is Pre-owned from a private collection and may have been worn, but as you can see from the pictures, this shows it's in Excellent condition and well taken care of. Because this is pre-owned, this will be sold as is and you can see its's in beautiful condition from my pictures. This will come with a small air tight zip lock baggie. Here is your chance to own a beautiful piece of History!
    Sold
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,612
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame 3D Bronze Crusader Shield Tag/Badge holder or Pendent
    weight is about 13 grams
    This is one of the coolest accessories you can wear on your chain to show you are a Steel Flame collector and attach your show badge or name tag at the same time if you would like. This is a Highly Detailed 3D Bronze Crusader Shield Pendent to put on your your chain brought to you by Steel Flame. This is extremely rare because of the super low amount made. This is an older model that I have not seen them make in a good while so its rare to see this one around. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to make the statement you are trying to show everyone.
    Authentic Steel Flame 3D Bronze Crusader Shield Pendent is highly detailed and done in Bronze. This is made up with a front plate and back plate held together with four spacers and four set so screws. So what everyone does is take this apart and put the badge attaching it to the bottom spacer so ythis will hold your name tag/badge in style especially at shows. Because this is Bronze, it has developed some nice some natural patina which really gives it the color you want. Only serious collectors would appreciate the rarity of this piece. On the back, you will see it is hallmarked "Steel Flame" logo and "USA" so you know this is authentic. This is Pre-owned from a private collection and may have been worn, but as you can see from the pictures, this shows it's in Excellent condition and well taken care of. Because this is pre-owned, this will be sold as is and you can see its's in beautiful condition from my pictures. This will come with a small air tight zip lock baggie. Here is your chance to own a beautiful piece of History!
    Sold
     

Share This Page