1. **ATTENTION ALL DEVILS** If you are still having trouble logging in, (Resetting your password should do "the trick") Optimum Online is blocking JD emails for some reason*, OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 10th Thread

Liu Kang Oct 22, 2016

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Anniversary MoJo .265" Saber Ground Satin Blade, Red/Black G10 G-rexed Mammoth Ivory Bark Handle w/Mosaic Pins
    8.2" Blade Length 14.15" Overall Length .265" Blade Thickness 20.5 Ounces
    .265" Saber Ground Satin INFI Blade V-Ground Edge with a Swedge and Choil
    Custom Contoured Hand-Shaped ed/Black G10 G-rexed Mammoth Ivory Bark Handle w/Mosaic Pins with Finger Grooves
    This one is Brand New from the 2015 Fall Knob Creek Show in KY!
    The Anniversary MoJo was introduced by Jerry Busse in 2012 and has long been discontinued. This is a true Custom and very RARE knife made by the Busse Custom Shop and the ONLY Anniversary MoJo at the 2015 Fall Knob Creek Show! The earlier models of these was called "Mr. MoJo" and the hook was there for a blade catcher as this was a combat fighting knife! This is a One of a Kind with hand picked matched and custom Hand-Shaped Red/Black G10 G-rexed Mammoth Ivory Bark Handle finished off with Mosaic Pins. What makes this one really special is all the other Anniversary MoJo had a blended Convexed Edge, this one however is the ONLY one I have ever see with a V-Ground Edge! Backed 100% with Lifetime Warranty from Busse Combat! Dead Mint never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Anniversary MoJo .255" Satin Blade, Black G10 G-rexed Desert Ironwood Handle with Mosaic Pins & Green Liners
    8.25" Blade Length 14.25" Overall Length .255" Blade Thickness 20.61 Ounces
    .255" Saber Ground Satin INFI Blade w/Blended Convexed Edge with a Swedge and Choil
    Custom Contoured Hand-Shaped Black G10 G-rexed Desert Ironwood Handle with Finger Grooves
    This one is from the Blade Show 2015 in Atlanta GA!
    This is a true Custom and very RARE knife made by the Busse Custom shop! The earlier models of these was called "Mr. MoJo" and the hook was there for a blade catcher as this was a combat fighting knife! Each of these are hand made with hand picked and custom Hand-Shaped Black G10 G-rexed Desert Ironwood Handle with Finger Grooves! This one has the green spacers between the Black G10 and the Desert Ironwood. Backed 100% with Lifetime Warranty from Busse Combat! Dead Mint never used, carried or sharpened. This knife was purchased directly by me from Busse Combat and than spent it's life in a safe.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Anniversary Mean Street .165" Flat Ground Satin Blade, Full Ram's Horn Handle w/Green Liners & Solid Brass Bolts
    Anniversary Mean Street - AMS
    3.6" Blade Length 8.2" Overall Length .9" Blade Width .165" Blade Thick 5.3 Ounces
    Flat Ground Hand Finished Satin Blade with Blended Convexed Edge
    Custom Hand Smooth Full Ram's Horn Handle w/Green Liners & Solid Brass Bolts
    INFI Blade Steel with Small Choil
    This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta Ga. The Anniversary Mean Street is no longer available for sale through the Busse Combat website because it's Sold Out, which probably means it had been Discontinued!
    The Anniversary Mean Street were introduced in 2013 by Jerry Busse and have long since been discontinued! This Anniversary Mean Street is a custom and made by hand by someone at the Busse Custom Shop. This particular knife was purchased by me directly from Busse Combat at the 2016 Blade Show. Completely one of a kind with custom hand smooth Full Ram's Horn Handle finished off with Green Liners & Solid Brass Bolts. The ram's horn is like a clear/transparent so you can see a nice shade of the Green Liners underneath. This really makes the handle unique! INFI is a proprietary Steel is used ONLY by Busse Combat knives. This is Brand New, never used, carried or sharpened. Tan Leather Sheath for Anniversary Mean Street
    Sold
     
    Last edited by a moderator: Oct 22, 2016
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    KC192 HG55 .24" Thick Competition Finish w/Large CBT, Textured Black/Tan G10 Handle
    Boss HG55 - Busse Old School Series HG55
    5.5" Blade Length 10.75" Overall Length .25" Blade Thickness 11.5 Ounces
    .24" Thick with Large CBT (Corrugated Bevel Technology)
    INFI Blade Steel
    Textured Black G10 Handle
    This is Brand New straight from the 2012 Spring Knob Creek Show! This grinds was never done ever before (not even coated), with the larger CBTs all the way to the tip!
    The Boss HG55 was introduced by Jerry Busse in 2009 and has long been discontinued. At that time, you could only get it with the Combat Grade (coated blade) with the CBT (Corrugated Bevel Technology) or the Limited Edition (convexed Satin Blade)! Well for the 2012 Spring Knob Creek Show, Busse decided to do a one time run of three different HG55 knives with a Competition Finish. This exact knife was made for a Knob Creek Gun Show in spring of 2012. None of these knives ever made it to the gun show itself, all of them were sold on Thursday night. As many of you know, Jerry Busse announced that they will no longer be doing the Competition Finish as an option until further notice! There was a total of three different models of these Competition Finish HG55 and this is one of the three with more of the CBT.
    The Competition Finish is NOT a satin finish and is just can uncoated blade, stamped with the Busse logo. There may be imperfection in the finish which may consist of dimples or machining marks. INFI is a proprietary Steel is used by Busse Combat knives and this model was never avil for sale over the internet and only at the one show. This is Brand New, never used, carried or sharpened.
    Sold
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Team Gemini .25" Saber Ground Satin Blade, Black G10 G-rexed Grey Giraffe Bone Handle w/Mosaic Pins
    Team Gemini - TG
    7.85" Blade Length 13.25" Overall Length 1.55" Blade Width .25" Blade Thickness 21.8 Ounces
    Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smoothed Black G10 G-rexed Grey Giraffe Bone Handle w/Mosaic Pins
    INFI Blade Steel, Large Choil, Swedge
    This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta Ga. The Team Gemini has long been discontinued and is no longer being made so get this while you can!
    The Team Gemini was introduced in 2012 by Jerry Busse and have since been discontinued. This was a very few of these exist that were made by the Busse Custom Shop. You can tell by looking at the beautiful matched hand shaped Black G10 G-rexed Grey Giraffe Bone Handle finished off with Mosaic Pins that a lot of time and work went into this knife! This is a truly special "One of a Kind"! I purchased this knife directly from Busse Combat so in Brand New Condition. This has a INFI Steel that is .25" Thick with a Hand Satin Finish! This uses the same Satin Team Gemini blank that was only available at Blade 2014! The Saber Ground Satin Blade with a V-Ground Edge is Razor Sharp and was never offered on the Satin Team Gemini! This is Brand New, never used, carried or sharpened.
    Sold
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Fat Ratweiler CG .26" Saber Ground Black Blade, Textured Black Canvas Micarta Handle
    Blade Length: 6.75”
    Blade Width: 1.75”
    Blade Thickness: .26”
    Overall Length: 13.3”
    Grind: V-Ground Edge
    Steel: SR101 58-60Rc
    Weight: 21.6 Ounces
    This is Brand New straight from Busse Combat/Swamp Rat Knife Works! This model has been discontinued and can no longer be ordered so get this while you still can!
    For years now there has been a huge demand for the return of the legendary Ratweiler. That call was answered for a super short one week run starting October 21, 2015 through about October 28, 2015! The RATWEILER CG is being offered in two thicknesses of approx. 3/16" and 1/4". A limited number of each thickness has been run and they sold out fairly quickly. This has a SR101 Steel that is .26" thick and the thicker of the two models offered! This knife will carry a lifetime warranty from Swamp Rat Knife Works! This is Brand New as directly from Busse Combat/Swamp Rat Knife Works so it was never used carried or Sharpened!
    Sold
     
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Fat SFNO .25" Saber Ground Satin Blade, Orange G10 G-rexed Mammoth Tooth Handle w/Solid Brass Bolts
    Special Forces Natural Outlaw - SFNO
    7" Blade Length 12.85" Overall Length .25" Blade Thickness 23.5 Ounces
    .25" Saber Ground Satin INFI Blade with a V-Ground Edge with Large Choil
    Hand Smoothed Orange G10 G-rexed Mammoth Tooth Handle w/Solid Brass Bolts
    This was Brand New from the 2015 Fall Knob Creek Show in KY and this is a "ONE of a KIND!"
    The SFNO (Special Forces Natural Outlaw) was introduced by Jerry Busse in 2004 and has long been since discontinued. This has the thicker Satin INFI blade! The Busse Combat Custom Shop really did a beautiful job on this custom Hand Shaped Orange G10 G-rexed Mammoth Tooth Handle w/Solid Brass Bolts. The Bright SOS Orange G10 matches perfectly with the color of the Orange in the Mammoth Tooth Handle! There was a rumor before that there existed the Fat SFNO that was a coated blade at .27" Thick and your normal SFNO either coated or satin were all .22" thick so this one is special because it's thinker than your normal standard SFNO! This V-Ground Edge is Razor Sharp. This is Brand New: never used, carried or sharpened!
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Custom Shop MOASH Variant .34" Black Blade w/Swedge, Magnum Textured Black/Tan G10 Handle
    MOASH - Mother of All Steel Heart
    8.1" Blade Length 14.25" Overall Length 1.75 Blade Width .34" Blade Thickness 23.8 Ounces
    8.25" Blade 14.5" Overall .34" Blade Thickness
    Flat Ground Black Coated Blade with V-Grind Edge & Custom Added Swedge
    The Mother of All Steel Heart, MOASH, was introduced in 2004 and has long since been discontinued. This is one of those rare ones that were made by the Busse Custom Shop and the only one that I saw at the Spring Knob Creek Show 2015 in KY. This knife is a legend and with good reason as it is deemed bombproof by many Military/Law-enforcement throughout the world and was never a production model.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Active Duty .185" Saber Ground Tanker Grey Blade, Textured Red/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.3 Ounces
    .185" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Red/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    Sold


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Team Gemini .25" Saber Ground Satin Blade, SOS Orange G10 G-rexed White Bone Handle w/Mosaic Pins
    Team Gemini - TG
    7.8" Blade Length 13.2" Overall Length 1.55" Blade Width .25" Blade Thickness 21.6 Ounces
    Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smoothed SOS Orange G10 G-rexed White Bone Handle w/Mosaic Pins
    INFI Blade Steel, Large Choil, Swedge
    This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta Ga. The Team Gemini has long been discontinued and is no longer being made so get this while you can!
    This was a very few of these exist that were made by the Busse Custom Shop. You can tell by looking at the beautiful matched hand shaped SOS Orange G10 G-rexed White Bone Handle finished off with Mosaic Pins, that a lot of time, thought and work went into this knife! This is a truly special "One of a Kind"! I purchased this knife directly from Busse Combat so in Brand New Condition. This has a INFI Steel that is .25" Thick with a Hand Satin Finish! This uses the same Satin Team Gemini blank that was only available at Blade 2014! The Saber Ground Satin Blade with a V-Ground Edge is Razor Sharp and was never offered on the Satin Team Gemini! This is Brand New, never used, carried or sharpened.
    Sold
     
    Last edited by a moderator: Nov 8, 2016
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Custom Shop NMFSH .32" Convexed Satin Blade, Black G10 G-rexed Ox Mux & End Grain Maple Wood Handles w/Solid Brass Bolts
    9.5" Blade Length 15.5" Overall Length .32" Thick
    INFI Blade Steel
    Convexed Satin Blade/Edge
    Nuclear Meltdown Treatment on the Spine and Edges
    This in Busse Custom Shop special made for the 2015 Blade Show in Atlanta GA. This has a INFI Steel that is .32" thick with a Convexed Satin Finish! The Convexed Zero Edge is Razor Sharp! A lot of work and time went into this knife especially into this custom handle. The Handles start with a set of Black G10, then cut out and matched set of both Ox Mux and End Grain Maple Wood Handles are set in and finished off with Brass Bolts! This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives and this model was never avil for sale and probably NEVER AGAIN! This is Brand New, never used, carried or sharpened. This knife will carry a lifetime warranty from Busse Combat!
    Sold


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    KC384 Swamp Rat Custom Shop Harpoon Ratmandu .195" Black Un-Sharpened Harpoon Blade, Textured Black Paper Micarta Handle
    Ratmandu - RMD
    5.25" Blade Length 10.4" Overall Length .195" Blade Thickness 9.7 Ounces
    SR101 Blade Steel
    Hand Ground Black Coated Blade w/V-Ground Edge
    This is directly from the 2014 Spring Knob Creek Show in KY!
    This was a very few Custom Swamp Rat Ratmandu ever made and this one just POPs out at you! This is one of the nicest! Hand Ground by hands in the Custom Shop! This has a Custom Hand Ground Harpoon Blade length which has a Un-Sharpened Top Edge! I purchased this knife directly from the Swamp Rat Knife Company at the 2014 Spring Knob Creek Show. This has a SR101 Steel that is .95" thick Black Coated Finish! The V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. This Grind was never avil for this model Swamp Rat Ratmandu before. I'm pretty sure this is a "One of a Kind" custom and you will probably never see another one like it.
    Sold
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Scrap Yard War Dog, .24" Satin INFI with Black Rec-C Handle
    4.8" Blade Length 9.7" Overall Length .24" Blade Thickness 6.2 Ounces
    INFI Blade Steel
    Flat Ground Satin Blade w/Blended Convexed Edge
    This was a very small production run of these for a Ganza or Special. This has a INFI Steel that is .25" thick with a satin Finish! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Grade Hell Razor .24" Saber Flat Ground Bama Clay Blade w/No CBTs w/Fuller, Textured Magnum Black Canvas Micarta Handle (1 of 4)
    Battle Grade Hell Razor - BG HR
    7.1" Blade Length 13" Overall Length 1.7" Blade Width .24" Blade Thickness 17.8 Ounces
    Saber Flat Ground Bama Clay Coated Blade with V-Ground Edge
    No CBT (Corrugated Bevel Technology), with Fuller (Blood Groove)
    Textured Magnum Black Canvas Micarta Handle
    SR101 Blade Steel, 58-60Rc with Choil
    This is Brand New purchased directly from Busse Combat at the 2016 Blade Show in Atlanta GA. This Battle Grade Hell Razor Model was available for sale starting November 19, 2015 and was discontinued about a week later so can no longer be order from the Busse Company Website!
    The Busse Combat Hell Razor was first introduced by Jerry Busse in 2005 and has long been discontinued. We are now proud to offer it in a Battle Grade version making it much more affordable for everyone who has ever wanted to own one. As part of "Operation 2 Weeks" it won't be around for long but I have little doubt that it will be our fastest selling Battle Grade to date! These "Sold Out" in only a few days! What makes this one special is it is one of four made with the Bama Clay coating and brought to the 2016 Blade Show in Atlanta GA. This coating is like dry sandpaper in texture. This was an offering and you had to be one of the four people to catch a tag to purchase it since is color was not an option in the "Operation 2 Weeks!"
    This was purchased directly from Busse Combat by myself at the 2016 Blade Show in Atlanta GA. This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Killa Zilla TT .27" Convexed Satin Blade, Black G10 G-rexed Green Maple Wood Handles w/Mosaic Pins
    Killa Zilla Test Team - KZ TT
    INFI Blade Steel
    12" Blade 18.5" Overall .27" Thick Convexed Blade
    This one is from the 2015 Blade Show in Atlanta Ga!
    These Killa Zilla II were introduced by Jerry Busse in 2010 and have long been discontinued. The very first ones were called Killa Zilla Test Team and this one uses the same blank. This one is a custom made by the Busse Custom Shop and uses .27 Beautiful Convexed Satin Blade to do the Monster chopping. This has a custom hand smooth Black G10 G-rexed Green Maple Wood Handles w/Mosaic Pins making this unique and special Chopper. This is rare because it will probably be the one one made this handle ever! The Full Height Convexed Blade with Zero Edge is Razor Sharp! INFI is a proprietary Steel is used by Busse Combat knives and this model was never avil for sale and one of a knife brought to the 2015 Blade Show in Atlanta Ga! This is Brand New, never used, carried or sharpened. This knife will carry a lifetime warranty from Busse Combat! I have a Beautiful Game Warden with a handle that matches this knife
    Sold
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop AK47 .18" Convexed Satin Blade, Textured Black G10 Handle
    American Kenzi 47 - AK47
    18.25" Blade Length 28.8" Overall Length .18" Blade Thickness 29.4 Ounces
    .18" Full Height Convexed Satin Blade
    INFI Blade Steel
    Textured Black G10 Handle
    The Busse Combat AK47 was first introduced by Jerry Busse in 2005 and back than it was with a coated blade. There were very few made with this Convexed Satin Blade for the shows and Ganza that Busse did. But these Busse AK47 have been discontinued and really sought after but the collectors especially the satin blades. These are nice short swords with a nice thin blade for slicing with a full handle that can be handled with both hands for an average person. This one is Brand New, never used, carried or sharpened. There are not many of these around for sale and are rare when in Mint Condition.
    Sold
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Shop Swamp Rat RMD .17" Saber Ground Doublecut INFI Blade, Textured JungleStorm G10 Handle
    Ratmandu - RMD
    5.3" Blade Length 10.35" Overall Length .17" Blade Thickness 10.2 Ounces
    INFI Blade Steel
    Saber Ground Doublecut Blade w/V-Ground Edge
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Swamp Rat Knife Company decided to do something special for the Fall Knob Creek 2015 Knife Show in KY so they made a few of these INFI Ratmandu in Never been done G10 Handles, put a V-Ground Edge on the Doublecut Finished Blade Finish. They only made one in each color so get it before it's gone. This was a very few of these made by hand by the Custom Shop and I purchased this knife directly from the Swamp Rat Knife Company at the Fall Knob Creek 2015 Knife Show in KY. This has a INFI Steel that is .17" thick with a Doublecut (Bead-Blasted) Finish! The V-Grind Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives and was never avil for this model Swamp Rat Ratmandu before.
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Silent Knight .265" Satin Blade, Hand Smooth Tan Canvas Micarta G-rexed with Green Blur Wood w/w/Mosaic Pins
    11.5" Blade Length 17.15" Overall Length 1.75" Blade Width .265" Blade Thickness 23.2 Ounces
    Flat Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Shaped Tan Canvas Micarta G-rexed with Green Blur Wood with w/Mosaic Pins
    INFI Blade Steel with Full Size Choil and Swedge
    This is from a Knob Creek show from 2009 or earlier. These Silent Knight are very very rare and not many were ever made. A true Busse Grail Knife!
    Sold
     
    Last edited by a moderator: Nov 18, 2016
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Fat Ratweiler CG .265" Saber Ground Black Blade, Textured Red/Black G10 Handle
    Blade Length: 6.75”
    Blade Width: 1.75”
    Blade Thickness: .265”
    Overall Length: 13.3”
    Grind: V-Ground Edge
    Steel: SR101 58-60Rc
    Weight: 22.3 Ounces
    Handle: Textured Red/Black G10
    This is Brand New straight from Busse Combat/Swamp Rat Knife Works! This model has been discontinued and can no longer be ordered so get this while you still can!
    For years now there has been a huge demand for the return of the legendary Ratweiler. That call was answered for a super short one week run starting October 21, 2015 through about October 28, 2015! The RATWEILER CG is being offered in two thicknesses of approx. 3/16" and 1/4". A limited number of each thickness has been run and they sold out fairly quickly. This has a SR101 Steel that is .265" thick and the thicker of the two models offered! This knife will carry a lifetime warranty from Swamp Rat Knife Works! This is Brand New as directly from Busse Combat/Swamp Rat Knife Works so it was never used carried or Sharpened!
    Sold
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Patriot Black Leather Sheath with Red Stitching with Dangler Option for the Busse Battle Saw
    Here is a beautiful Black Leather Sheath made by Patriot Leather Company for the Busse Combat Battle Saw. Never used or carried. Don't wait for the wait time and get this know for your knife!
    Sold
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Team Gemini .25" Saber Ground Satin Blade, Red/Black G10 G-rexed Red Mammoth Tooth Handle w/Mosaic Pins
    7.8" Blade Length 13.3" Overall Length .25" Blade Thickness 22.3 Ounces
    INFI Blade Steel
    Saber Ground Satin Blade with a V-Ground Edge
    Custom Hand Smoothed Red/Black G10 G-rexed Red Mammoth Tooth Handle w/Mosaic Pins
    This is Brand New from the 2015 Fall Knob Creek Show in KY!
    This Model has been discontinued and can no longer be order from the Busse Company Website, so get this before the price Skyrockets!
    This was a very few of these exist that were made by the Busse Custom Shop. You can tell by looking at the beautiful matched hand shaped Red/Black G10 G-rexed Red Mammoth Tooth Handle w/Mosaic Pins that a lot of time and work went into this knife! I purchased this knife directly from Busse Combat so in Brand New Condition. This has a INFI Steel that is .25" Thick with a Satin Finish! This uses the same Satin Team Gemini blank that was only avil at Blade 2014! The Saber Ground Satin Blade with a V-Ground Edge is Razor Sharp and was never offered on the Satin Team Gemini! This is Brand New, never used, carried or sharpened.
    Sold
     
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Team Gemini Battle Grade .235" Flat Saber Ground Muddy Brown Blade w/Fuller, Textured Magnum Tan Canvas Micarta Handle
    TGBG - Team Gemini Battle Grade
    7.8" Blade Length 13.3" Overall Length 1.6" Blade Width .235" Blade Thickness 18.6 Ounces
    Muddy Brown Coated Flat Saber Ground Blade w/Fuller with V-Ground Edge
    Textured Magnum Tan Canvas Micarta Handle
    This uses the SR-101 Blade steel with a 58-60Rc, with Full Size Choil
    This Model was available for sale starting October 7, 2015 through October 21, 2015 and has been discontinued so can no longer be order from the Busse Company Website!
    The Team Gemini was made famous by the TV Series The Walking Dead where it was carried by the character Daryl Dixon and used to dispatch herds of zombies. It was made legendary by its use in military campaigns around the world. The Team Gemini is one of our most popular blades and for good reason. We are now proud to offer it in a Battle Grade version making it much more affordable for everyone who has ever wanted to own one. As part of "Operation 2 Weeks" it won't be around for long but I have little doubt that it will be our fastest selling Battle Grade to date!
    This was purchased directly from Busse Combat during the "Two Weeks". There were not many of these made and was only available for two weeks and than discontinued. This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Game Warden .18" Flat Ground Satin Blade, Textured Tiger Hide Canvas Micarta Handle
    3" Blade Length 7" Overall Length .18" Blade Thickness 5.4 Ounces
    .18" Thick INFI Blade Steel Satin Finish
    Flat Ground Blade with V-Grind Edge
    Textured Tiger Hide Canvas Micarta Handle
    This is from the Original Run from Busse Combat with the satin blade and Tiger Hide Canvas Micarta Handle.
    The Busse Game Warden was introduced into the Busse Company Store in about 2006 and have since been discontinued. These were an instant hit and sold out fast! This would be as close to the "Limited Edition" of the Game Warden as you are ever going to get. There were no actual Limited Edition with a number put on the blade but usually the Limited Editions came with the satin blade with the Textured Tiger Hide Canvas Micarta Handle. This Flat Ground Satin Finish Blade with V-Grind Edge is Razor Sharp! This is pre-owned and although looks great to in pictures and in hand, if you look super close, you can see ultra light superficial scratches seen only from certain angles. This knife will carry a lifetime warranty from Busse Combat! Because this is pre-owned and listed as used, this is being sold "As Is."
    Sold
     
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop War Train Fusion WTF Battle Grade .295" Saber Ground Grey Blade, Textured Magnum Maroon Canvas Micarta Handle
    WTF BG - War Train Fusion Battle Grade
    11" Blade Length 17.25" Overall Length 2.75" Blade Width .30" Blade Thickness 36.4 Ounces
    Saber Ground Grey Coated Blade with V-Ground Edge
    Textured Magnum Maroon Canvas Micarta Handle
    SR101 Blade Steel, 58-60Rc with Choil
    This is Brand New purchased directly from Busse Combat. This War Train Fusion Battle Grade Model was available for sale starting January 27, 2016 and was discontinued about two weeks later so can no longer be order from the Busse Company Website because it's Sold Out, and has been Discontinued!
    These War Train Fusion were introduced by Jerry Busse in 2016 and have long been discontinued. This was based on one of his designs from the 80's with an updated Fusion Handle. There was two options, you can either purchase with a thicker INFI blade with a Hand Finished Satin Blade or get it with a coated SR101 that was slightly thinner at less than 1/3 the cost of the thick Satin INFI! As part of "Operation 2 Weeks" it won't be around for long but I have little doubt that it will be our fastest selling Battle Grade to date! These "Sold Out" in only a few days! This one has a Saber Ground Grey Coated Blade with V-Ground Edge! This has a Textured Magnum Maroon Canvas Micarta Fusion Handle. This monster blade is capable of moving anything in its way! The V-Grind Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold

    These are fresh from the Knob Creek Show held 4/14/12. These have a finsih never done before, it's like a combination between a Competition Finish and a Satin Finish. There may be marks on the finish. Not many made but I do have a few. Get them before they are gone.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    KC189 HG55 .24" Thick Competition Finish w/Large CBT, Textured Black/Tan G10 Handle
    Boss HG55 - Busse Old School Series HG55
    5.5" Blade Length 10.75" Overall Length .25" Blade Thickness 11.5 Ounces
    .24" Thick with Large CBT (Corrugated Bevel Technology)
    INFI Blade Steel
    Textured Black G10 Handle
    This is Brand New straight from the 2012 Spring Knob Creek Show! This grinds was never done ever before (not even coated), with the larger CBTs all the way to the tip!
    The Boss HG55 was introduced by Jerry Busse in 2009 and has long been discontinued. At that time, you could only get it with the Combat Grade (coated blade) with the CBT (Corrugated Bevel Technology) or the Limited Edition (convexed Satin Blade)! Well for the 2012 Spring Knob Creek Show, Busse decided to do a one time run of three different HG55 knives with a Competition Finish. This exact knife was made for a Knob Creek Gun Show in spring of 2012. None of these knives ever made it to the gun show itself, all of them were sold on Thursday night. As many of you know, Jerry Busse announced that they will no longer be doing the Competition Finish as an option until further notice! There was a total of three different models of these Competition Finish HG55 and this is one of the three with more of the CBT.
    The Competition Finish is NOT a satin finish and is just can uncoated blade, stamped with the Busse logo. There may be imperfection in the finish which may consist of dimples or machining marks. INFI is a proprietary Steel is used by Busse Combat knives and this model was never avil for sale over the internet and only at the one show. This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Argonne Assault Light Brigade .25" Competition Finished Blade, Black/Tan G10 Handle
    10" Blade Length 16" Overall Length .25" Blade Thickness
    Hollow Ground Competition Finish INFI Blade w/V-Ground Edge
    This is from the Fall Knob Creek 2014 Show.
    This was a very Limited Production Run Busse Combat made Exclusively for the Fall Knob Creek 2014 show since the Competition Finish can NOT be ordered for this particular knife! This has a triple ground blade with a V-Ground Edge which is Super Sharp! The middle part of the spine is not just hollowed out to save on weight but is also sharp! This is Brand New, never used, carried or sharpened.
    Sold
     
    Last edited by a moderator: Nov 30, 2016
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Gladius .29" Aged Bronze Cerakoted, Canvas Micarta Handle (1 of 5)
    15.15" Blade 23.20" Overall .305" Blade Thickness 2 Pounds 4.6 Ounces Estimated Weight
    Convexed Blade Double Convexed Cerakoted Blade with a V-Ground Edge & Fuller (Blood Groove)
    Textured Handle which can be either Canvas Micarta or G10 but is unknown because it's also protected and coated with the Cerakote Coating.
    INFI Blade Steel
    This is Brand New from the 2015 Blade Show in Atlanta Ga an Exclusive for ONLY this ONE show! I believe there were only 5 made so this one is super rare and will never be done again! The Gladius is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!
    This was a very Limited Production Run Busse by the Combat Custom Shop! This was introduced by Jerry Busse in the summer of 2010 and has long since been discontinued! The Double Edged V-grind is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat at the 2015 Blade Show in Atlanta Ga! This knife is one of the rare knives that Busse decided to make only Five of and have them Aged Bronze Cerakoted for this ONE Show! The actual handle material is unknown can be either canvas micarta or G10, and because it is coated, is not known but will still have the lifetime guarantee. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, you never know! This is supposed to looked old, aged and with faux corrosion and patina accents. INFI is a proprietary Steel is used by Busse Combat knives and is Legendary! This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find Because this color combination was never offered when it was in production and only 5 were ever made! Never Used, Carried or Sharpened!
    Sold
     
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Hell Razor .21" Saber Ground Black Crinkle Blade w/Swedge, Textured Magnum Black/Tan G10 Handle, No CBTs
    Hell Razor - BG HR
    6.75" Blade Length 12.5" Overall Length 1.75" Blade Width .21" Blade Thickness 16.2 Ounces
    Saber Flat Ground Black Crinkle Coated Blade with V-Ground Edge and No CBT (Corrugated Bevel Technology)
    No CBT (Corrugated Bevel Technology), with Fuller (Blood Groove)
    Textured Magnum Black Canvas Micarta Handle
    INFI Blade Steel, with Full Size Choil, Swedge on front top of Blade
    This is Brand New purchased directly from Busse Combat at the Spring 2015 Know Creek Show in KY. The Hell Razor is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!
    in 2005 when the Hell Razor was introduced by Jerry Busse, all of them came with the CBT (Corrugated Bevel Technology) except for the few Mud Razors that were produced. Those have long since been discontinued. There were only a few of these made without the CBT, and this one is even more special because it has a free hand ground Swedge. This is one of probably just a handful just for the Spring 2015 Know Creek Show, so not many exist. This one is Brand New: Never been used, carried or sharpened!
    Sold
     
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Custom Shop Game Warden .225" Deep Hollow Ground Satin Blade, Full Striped Maple/CrossCut End Grain Maple Handle w/Mosaic Pins & Black Liners
    Game Warden - GW
    2.85" Blade Length 6.85" Overall Length .23" Thick 5.87 Ounces
    Deep Hollow Ground Hand Finished Satin Blade
    Custom Hand Shaped Full Striped Maple/CrossCut End Grain Maple Handle w/Mosaic Pins & Black Liners
    This is Brand New direct from the Spring Knob Creek 2015 Show. The Game Warden is no longer being made and has been discontinued so get this while you still can.
    This was a hand made custom made by the Busse Custom Shop for the Spring Knob Creek 2015 Show! This Deep Hollow Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. The matched set of Full Blue/Brown Full Curly Oak Handle were hand selected and custom made so get this before it's gone. I purchased this directly from Busse Combat! This has a INFI Steel that is .225" thick with a Satin Finish! You can tell by looking at the handle that a lot of time and work went into making this gorgeous knife! This grind and thickness was never a production and only a few were ever made for the knife shows.
    Sold
     
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    These are fresh from the Knob Creek Show held 4/14/12. These have a finsih never done before, it's like a combination between a Competition Finish and a Satin Finish. There may be marks on the finish. Not many made but I do have a few. Get them before they are gone.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    KC189 HG55 .24" Thick Competition Finish w/Large CBT, Textured Black/Tan G10 Handle
    Boss HG55 - Busse Old School Series HG55
    5.5" Blade Length 10.75" Overall Length .25" Blade Thickness 11.5 Ounces
    .24" Thick with Large CBT (Corrugated Bevel Technology)
    INFI Blade Steel
    Textured Black G10 Handle
    This is Brand New straight from the 2012 Spring Knob Creek Show! This grinds was never done ever before (not even coated), with the larger CBTs all the way to the tip!
    The Boss HG55 was introduced by Jerry Busse in 2009 and has long been discontinued. At that time, you could only get it with the Combat Grade (coated blade) with the CBT (Corrugated Bevel Technology) or the Limited Edition (convexed Satin Blade)! Well for the 2012 Spring Knob Creek Show, Busse decided to do a one time run of three different HG55 knives with a Competition Finish. This exact knife was made for a Knob Creek Gun Show in spring of 2012. None of these knives ever made it to the gun show itself, all of them were sold on Thursday night. As many of you know, Jerry Busse announced that they will no longer be doing the Competition Finish as an option until further notice! There was a total of three different models of these Competition Finish HG55 and this is one of the three with more of the CBT.
    The Competition Finish is NOT a satin finish and is just can uncoated blade, stamped with the Busse logo. There may be imperfection in the finish which may consist of dimples or machining marks. INFI is a proprietary Steel is used by Busse Combat knives and this model was never avil for sale over the internet and only at the one show. This is Brand New, never used, carried or sharpened.
    Sold

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Fat SFNO .26" Saber Ground Satin Blade, Black G10 G-rexed Blue/Brown Curly Oak Handles w/Red Liners & Mosaic Pins
    Special Forces Natural Outlaw - SFNO
    7" Blade 12.9" Overall .26" Thick 17.23 Ounces
    .26" Saber Ground Satin INFI Blade with a Blended Convexed Edge with Large Choil
    Hand Smoothed Black G10 G-rexed Wood Handles w/Red Liners & Mosaic Pins
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe "ONE of a KIND" because I didn't see any others at this show!
    The SFNO (Special Forces Natural Outlaw) was introduced by Jerry Busse in 2004 and has long been since discontinued. This one has the thickest Satin INFI blade I have ever seen on a SFNO! There was a rumor before that there existed the Fat SFNO that was a coated blade at .27" Thick! I have never seen one and only heard of it. Well, this would be very close if not the same thickness. This is the very first time I have seen them do wood handles like this before. I am unsure of Busse will ever use it again, and if not, this will be beyond a Super Rare Knife!
    The Blade is made of INFI which is a proprietary Steel is used by Busse Combat Knives. This is Brand New, never used, carried or sharpened.
    Sold
     
    Last edited by a moderator: Dec 5, 2016
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,682
    89
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Battle Saw CG .255" Flat Ground Sage Crinkle Blade w/CBT, Textured Black/Tan G10 Handle
    Battle Saw Combat Grade - BSCG
    11.1" Blade Length 16.5" Overall Length 2" Blade Width .255" Blade Thickness 25.8 Ounces
    Flat Ground Blade with CBT (Patented Corrugated Bevel Technology) and V-Ground Edge
    Textured Black/Tan G10 Handle
    INFI Blade Steel, Large Choil
    This was part of the "Operation 2 Weeks" which started October 14, 2015 and ended October 20, 2015
    This knife was inspired by a saw tooth monster Jerry Busse made back in the early 80's and is built on the foundation of the legendary Straight Handled Battle Mistress. Jerry Busse tried to have this for Blade 2015 but was not ready in time so decided to introduce this as part of the "Operation 2 Weeks" which started October 14, 2015 and ended October 20, 2015. So this was a very short run and there were not that many made. The only option was the color of the coating and handle material options. The V-Ground Edge on this knife is Razor Sharp! The Black/Tan G10 handles you see on this knife cost an additional $85 as an option. INFI is a proprietary Steel is used by Busse Combat knives and is Legendary! This knife will carry a lifetime warranty from Busse Combat! This one is was purchased by me directly from Busse Combat as part of the "Operation 2 Weeks." Brand New, Never Used, Carried or Sharpened!
    Sold
     

Share This Page