1. **ATTENTION** If you are still having trouble logging in (Resetting your password should do "the trick") OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! (Yelling/whisper voice implied there for *effect*)
    Dismiss Notice

Thread of New Knives Updated Daily

Liu Kang Feb 13, 2017

  1. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Hell Razor Variant .205" Sage Trailing Point Blade, Magnum Textured Black Canvas Micarta Handle
    Hell Razor - HR
    6.75" Blade Length 12.4" Overall Length .205" Blade Thickness 14.2 Ounces
    Saber Sage Coated Finish V-Ground Edge
    Magnum Textured Black Canvas Micarta Handle
    INFI Blade Steel, Large Choil
    INFI Blade Steel, Full Size Choil, Swedge
    This is Brand New purchased directly from Busse Combat at the 2014 Fall Knob Creek Show in KY. The Hell Razor Model has been discontinued so can no longer be order from the Busse Company Website! This is Brand New purchased directly from Busse Combat.

    The Hell Razor was made and introduced in 2005 with CBT (Corrugated Bevel Technology) and has long since been discontinued. This was a very special Hand Ground Custom from the Busse Custom Shop made for the Fall Knob Creek 2014 show! There were only three of this versions made for that show and I have sold the other two so this is my last one. This has a custom Hand Ground Trailing Point Blade with a false top edge or swedge. The V-Ground Edge is Razor Sharp! I purchased this directly from Busse Combat! This has a INFI Steel that is .205" thick with Sage Coating! The handle is a Magnum Textured Black Canvas Micarta Handle. This is Brand New, never used, carried or sharpened.

    $750 Sold Pending Funding
     
    Last edited: Nov 19, 2017 at 12:12 AM
  2. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Urban Fudge .325" Saber Hollow Ground Satin Blade, Full Red Buckeye Burl Handle w/Mosaic Pins & Yellow Liners
    Urban Fudge - UF
    5.8" Blade Length 10.75" Overall Length 1.25" Blade Width .325" Blade Thickness 14.4 Ounces
    Hand Ground Saber Hollow Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smoothed/Shaped Full Red Buckeye Burl Handle w/Mosaic Pins & Yellow Liners
    INFI Blade Steel at 58-60Rc with Choil with NO Swedge
    This is Brand New straight from the Busse Custom Shop! This Urban Fudge model was available for sale starting March 9th 2016 through March 14, 2016 and has been discontinued so can no longer be order from the Busse Combat.
    Jerry Busse first introduced the Urban Grudge in March of 2010 in a online Ganza and has been discontinued. When the Urban Grudge was offered, it was only available with a Doublecut (bead-blasted) Blade finish with Black Canvas Micarta. This knife comes from the original HG55 design but they took off CBT (Corrugated Bevel Technology) and shortened and reshaped the handle to make it shorter and fit the handle better. And since the HG55 was a fighter knife, so is this one! This one is the New version in a Bombproof FAT version. These are all done through the Busse Custom Shop with Deep Hollow Ground blade on a .325" Blank. This is a Full Blown Custom finished off WITHOUT a Swedge, V-Ground Edge and a Hand Finished Satin Blade. The normal Urban Fudge has a swedge but this one does NOT which makes this one much beefier and SUPER RARE! The Busse Custom Shop went all out on the handle and did a Custom Hand Smoothed/Shaped Tan Canvas Micarta G-rexed Custom Hand Smoothed/Shaped Full Red Buckeye Burl Handle finished off with Mosaic Pins & Yellow Liners. You can tell a lot of thought, planning and work went into making this beautiful knife. This was purchased directly from Busse Combat Custom Shop by myself. There were not many of these made and was only available much less a full blown custom and it has already been discontinued. This is Brand New, never used, carried or sharpened.
    $1300
     
    Last edited: Nov 8, 2017
  3. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Urban Fudge .325" Saber Hollow Ground Satin Blade, Maroon Canvas Micarta G-rexed Buckeye Burl Handle w/German Nickle Silver Tubes with Blue Glow in the Dark Spacers
    Urban Fudge - UF
    5.8" Blade Length 10.75" Overall Length 1.25" Blade Width .325" Blade Thickness 14.9 Ounces
    Hand Ground Saber Hollow Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smoothed/Shaped Maroon Canvas Micarta G-rexed Buckeye Burl Handle w/German Nickle Silver Tubes (filled with Copper) & Blue Glow in the Dark Spacers
    INFI Blade Steel at 58-60Rc with Choil with NO Swedge
    This is Brand New straight from the Busse Custom Shop! This Urban Fudge model was available for sale starting March 9th 2016 through March 14, 2016 and has been discontinued so can no longer be order from the Busse Combat.

    Jerry Busse first introduced the Urban Grudge in March of 2010 in a online Ganza and has been discontinued. When the Urban Grudge was offered, it was only available with a Doublecut (bead-blasted) Blade finish with Black Canvas Micarta. This knife comes from the original HG55 design but they took off CBT (Corrugated Bevel Technology) and shortened and reshaped the handle to make it shorter and fit the handle better. And since the HG55 was a fighter knife, so is this one! This one is the New version in a Bombproof FAT version. These are all done through the Busse Custom Shop with Deep Hollow Ground blade on a .325" Blank. This is a Full Blown Custom finished off WITHOUT a Swedge, V-Ground Edge and a Hand Finished Satin Blade. The normal Urban Fudge has a swedge but this one does NOT which makes this one much beefier and SUPER RARE! The Busse Custom Shop went all out on the handle and did a Custom Hand Smoothed/Shaped Maroon Canvas Micarta G-rexed Buckeye Burl Handle finished off with German Nickle Silver Tubes (filled with Copper) & Blue Glow in the Dark Spacers. So I guess if you should have had this knife in the light and had it charged, you will see the liners in the dark as it glows a warm blue so you know where it is in the dark. You can tell a lot of thought, planning and work went into making this beautiful knife. This was purchased directly from Busse Combat Custom Shop by myself. There were not many of these made and was only available much less a full blown custom and it has already been discontinued. This is Brand New, never used, carried or sharpened.
    Sold Pending Funding
     
    Last edited: Nov 10, 2017
  4. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Fatback Defenders .325" Saber Hollow Ground Satin Blade, Red Tequila Sunrise G10 G-rexed Red Mammoth Tooth Handle w/Mosaic Pins & Grey Liners
    Fatback Defenders - FD
    4.35" Blade Length 9.05" Overall Length 1.05" Blade Width .325" Blade Thickness 12.4 Ounces
    Hand Ground Saber Hollow Ground Hand Finished Hammered/Satin Blade with a Fine V-Ground Edge
    Custom Hand Shaped/Smoothed Red Tequila Sunrise G10 G-rexed Red Mammoth Tooth Handle w/Mosaic Pins & Grey Liners
    INFI Blade Steel at 58-60Rc with Small Choil
    This is Brand New straight from the Busse Custom Shop! This Fatback Defender model was available for sale starting April 27th 2016 through May 5th, 2016 and has been discontinued so can no longer be order from the Busse Combat.
    The original Public Defender was introduced by Jerry Busse in 2002. This was a really cool knife with only a 4.5" blade at about .187" thick. This is about as close to a Tanto Blade as you were going to get from Busse Combat. Well, fast forward 14 years later, Busse takes the design and adds an Ergo Handle to the design and makes it in three versions. The versions are Ergo Public Defender Limited Edition, the Ergo Public Defender Battle Grade and the thick version of the Fatback Defender! Garth Reckner first introduced the Fatback Defender has been discontinued. You will notice these were offered through the Busse Custom Shop because these were all done by hand. The ones that were available for order have a custom Deep Hollow Ground Blade all done by hand. Well, this one is different and a full blown custom. The Busse Custom Shop put a Deep Dish Hollow Ground Grind with a Hand Finished Satin Blade with a very fine V-Ground Edge on this beauty. They also went all out on the Handle with a Custom Hand Shaped/Smoothed Red Tequila Sunrise G10 G-rexed Red Mammoth Tooth Handle finished off with Mosaic Pins & Grey Liners. The Grey Liners match so well with the Grey in the Mammoth Tooth so well! This was a "One of a Kind" and you will never see another one like it. You can tell a lot of thought, planning and work went into making this beautiful knife. This is Brand New, never used, carried or sharpened.
    $1500 Sold Pending Funding
     
    Last edited: Nov 10, 2017
  5. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat SAR4 #125 Limited Edition .22" Convexed Satin Blade, Textured Tigerhide Canvas Micarta Handle
    Search and Research 4 Limited Edition - SAR4 LE
    4.85" Blade Length 10.6" Overall Length 1.5" Blade Width .267" Blade Thickness 13.8 Ounces
    Full Height Convexed Hand Finished Satin Blade with a Convexed Zero Edge
    Textured Tigerhide Canvas Micarta Handle
    INFI Blade Steel, Small Choil Choil with Nuclear Meltdown Treatment on the Spine and Edges (Rounded Edges)
    This was Brand New directly from the Busse Combat Company Store! The Search and Research 4 Limited Edition - SAR4 LE has long been discontinued and is no longer being made so get this while you can!
    These Search and Research 4 Limited Edition - SAR4 LE were introduced by Jerry Busse in 2009 and have long been discontinued. These where only available though the Busse Company Store and sold out in minutes and instantly discontinued. These have a Full Height Convexed Hand Finished Satin Blade with a Convexed Zero Edge which is Razor Sharp. The actual handle material is textured Tigerhide Canvas Micarta Handle. This knife has been back to the Busse Custom Shop Spa to have the satin finish touched up. This is Brand New, never used, carried or sharpened.
    $750
     
  6. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop 2nd Gen Steel Heart Ergo .24" Saber Ground Hammered/Satin Blade, Maroon Canvas Micarta G-rexed Mixed Material Handle w/Mosaic Pins
    2nd Gen SHE - Second Generation Steel Heart Ergo
    7.45" Blade Length 13.35" Overall Length 1.7" Blade Width .255" Blade Thickness 21.3 Ounces
    Flat Saber Ground Hand Finished Hammered/Satin Blade with a V-Ground Edge
    Custom Hand Shaped/Smoothed Maroon Canvas Micarta G-rexed Mixed Material Handle w/Mosaic Pins
    INFI Blade Steel, Full Size Choil, Hammered Flats
    This is Brand New directly from the Busse Combat Custom Shop. The Second Generation Steel Heart Ergo is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The Steel Heart E - SHE was introduced by Jerry Busse in 2001 and has since been discontinued. Many didn't think it looked well but those that have handled it know the ergo handle felt great in the hand and the INFI steel would handle anything you can put it through. After about 15 years, Jerry changed the design to make this better and keep everything else that worked before and this the Second Generation Steel Heart Ergo was introduced by Jerry Busse in December of 2015 and has since been discontinued. It was part of "Operation Two Weeks" and was available for pre-order at that time. The catch was this was only available in Combat Grade meaning INFI steel but with a coating. So there were no Satin Finish available. That's what makes this a super rare knife in addition to having it also having a custom Satin/Hammered Finish along Custom Handle. They applied on the flat and bevel with a Hammered finish. This is NOT the hammered silver coating but not it's a dual finished blade. This has a very sharp Fine V-Ground Edge which is Razor Sharp! The Busse Custom Shop really outdid themselves with the Custom Hand Shaped/Smoothed Maroon Canvas Micarta G-rexed Mixed Material Handle finished off with Mosaic Pins. The mixed material matrix consist of grape vine and walrus jaw bone in resin. You can see a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! This is Brand New, never used, carried or sharpened.
    $1200
     
  7. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Camp Cleaver .322" Saber Ground Satin Blade, Hand Smoothed/Shaped Desert Sandstorm G10 G-rexed Stacked Bones in Black/Blue Resin Handle w/Mosaic Pins
    Camp Cleaver - CC
    5.55" Blade Length 10.75" Overall Length 3" Blade Width .323" Blade Thickness 30.9 Ounces
    Flat Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smoothed/Shaped Desert Sandstorm G10 G-rexed Stacked Bones in Black/Blue Resin Handle w/Mosaic Pins
    INFI Blade Steel, Talon Hole
    This is Brand New purchased directly from Busse Combat Custom Shop. The Camp Cleaver Model was a part of "Operation Two Weeks" and available for sale starting March 20, 2016 through March 23, 2016 and has been discontinued so can no longer be order from the Busse Company Website! The Camp Cleaver is no longer available for sale through the Busse Combat because it's Sold Out, which means it had been Discontinued!

    Garth Reckner introduced the Camp Cleaver in April of 2016 and this model has long been discontinued. He described this knife as:
    The Camp Cleaver is designed for a variety of chores where bone crushing strength is needed in a compact package.
    Not many words needed for this one, it's thick at .322" thick and being about 3" wide and only 10.75" overall length, 29.2 ounces is quite a bit of weight for such a short chopper! This is an Extremely Rare one as it is a custom from the Busse Custom Shop! I purchased this knife directly from Busse Combat so in Brand New Dead Mint Condition. This has a thick INFI Steel blade that is .32" Thick with a Hand Finished Satin INFI Blade and V-Ground Edge which is Razor Sharp. The Busse Custom Shop went all out on the handle and did a Custom Hand Smoothed/Shaped Desert Sandstorm G10 G-rexed Stacked Bones finished off with Mosaic Pins. The handle are an overall Black/White in color with suck a beautiful pattern. You can tell a lot of thought, planning and work went into this knife! Because of the thickness of the scales/handles along with the blade thickness, this is a thick handle and not a light blade in any way. I'm sure you can use this to do much more than your average butcher meat cutting! This is one of those knives you have to really feel/weight of it in your hands to appreciate. This is Brand New, never used, carried or sharpened.
    $1700
     
  8. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Emerson Aftershock BTS Serrated Edge Blade Pocket Knife Black G10 Handle w/Wave S/N #0018
    Blade Length: 3.8″
    Handles: Black G-10 epoxy / glass laminate
    Overall Length: 8.9″
    Handle Length: 5.1″
    Blade Thickness: .125″
    Hardness: 57-59 RC
    Weight: 5.0 oz.
    Blade: 154CM
    Lock: Aerospace grade Titanium
    Finish: Black Cerakote
    Grind: Conventional V Grind
    Pocket Clip: Right Hand Tip Up
    Weight: 5.8 Ounces
    Serial Number #18
    Lanyard Hole
    With Wave (Emerson Opener)
    Made in USA

    Here is a New in Box Emerson Aftershock where you actually see the actual knife you are getting and not a stock photo. This one has a low serial number which matches the box. Smooth opening action with early lockup. There is no blade play in any direction with a solid lockup. Nice blade centering. This will have one of the strongest warranties in the industry. This is Brand New, never used carried or sharpened. This will come with the Factory box and baggie.
    $200
     
  9. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Short American Butaniku Sword .256" Aged Bronze Cerakoted, Textured Handle (1 of 5)
    Short American Butaniku
    23.65" Blade Length 35.90" Overall Length 1.25" Blade Width .256" Blade Thickness 39.2 Ounces
    Flat Saber Ground Blade with Fuller and V-Ground Edge
    Textured Canvas Micarta or G10 Handle with Cerakote Coating
    INFI Blade Steel with Full Size Choil
    This was Brand New purchased directly from the 2015 Blade Show in Atlanta Ga an Exclusive for ONLY this show! I believe there were only 5 made so this one is super rare and will never be done again!

    This Short American Butaniku Sword is a beautiful knife made by Busse Combat Custom Shop. This model was made because some people thought that the full size Butaniku was too long and heavy. So after much feedback from many people on the forums, the Busse Combat Custom Shop created this beauty. I think many would say that the weight and balance of this sword is much better now. The problem is that this was never a production Sword, only a few of these were ever made and only to shows and some online ganzas. This Saber Ground Blade with a V-Ground Edge with a fuller (Blood Groove.) This particular knife was purchased by me directly from Busse Combat at the Blade 2015 Show. There were only 5 of these made in this Aged Bronze Cerakoted combination. The Cerakote cover not only the blade but the Handles and protects it. Because the actual handle is covered, you can not see what the handle material is and will either be G10 or Canvas Micarta. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives! This one is new and a RARE Super Find as only 5 were ever made for this color/model! This is Brand New: never used, carried or sharpened.

    $2600
     
    Last edited: Nov 14, 2017
  10. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Elmax Steak Knife Black Digicam Cerakoted .09" Hollow Saber Ground Blade, Canvas Micarta Handle (1 of 5)
    Long Elmax Steak Knife
    4.75" Blade Length 9.35" Overall Length .7" Blade Width .09" Blade Thickness 3.93 Ounces
    Hollow Saber Ground Black Digicam Cerakote Coated Blade with a V-Ground Edge
    Textured Canvas Micarta or G10 Handle with Cerakote Coating
    Elmax Blade Steel, Small Choil
    This was Brand New from the 2015 Blade Show in Atlanta Ga an Exclusive for ONLY this show! I believe there were only 5 made so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore.


    The Elmax Steak Knife was introduced by Busse at the 2013 Blade Show and has long been since discontinued. There are three different length of the Elmax Steak Knife made by Busse Combat Custom Shop and this is the longest version. So for the 2015 Blade Show, the Busse Custom Shop wanted to do something different so took 5 of these long Elmax Steak Knives and had them cerakoted with the Black Digicam pattern. This knife is one of the rare knives that Busse didn't use INFI Steel on, this one is made of Elmax Steel and is super thin and even Sharper! This thin blade makes it the perfect slicer and with the power and strength of a Busse Heat Treat on Elmax Steel. The Cerakote coating cover not only the blade but the Handles and protects it. Because the actual handle is covered, you can not see what the handle material is and will either be G10 or Canvas Micarta. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives! This knife will carry a lifetime warranty from Busse Combat! This one is new and a Super Rare find because they only made 5 in this color combination! Never Used, Carried or Sharpened!

    $415
     
    Last edited: Nov 14, 2017
  11. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Elmax Steak Knife Aged Bronze Cerakoted .09" Hollow Saber Ground Blade, Textured Handle (1 of 12)
    Long Elmax Steak Knife
    4.75" Blade Length 9.25" Overall Length .7" Blade Width .09" Blade Thickness 4.1 Ounces
    Hollow Saber Ground Aged Bronze Cerakote Coated Blade with a V-Ground Edge
    Textured Canvas Micarta or G10 Handle with Cerakote Coating
    Elmax Blade Steel, Small Choil
    This was Brand New from the 2015 Blade Show in Atlanta Ga an Exclusive for ONLY this show! I believe there were only 12 made so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore.

    The Elmax Steak Knife was introduced by Busse at the 2013 Blade Show and has long been since discontinued. There are three different length of the Elmax Steak Knife made by Busse Combat Custom Shop and this is the longest version. So for the 2015 Blade Show, the Busse Custom Shop wanted to do something different so took 12 of these long Elmax Steak Knives and had them cerakoted with the Aged Bronze pattern. This knife is one of the rare knives that Busse didn't use INFI Steel on, this one is made of Elmax Steel and is super thin and even Sharper! This thin blade makes it the perfect slicer and with the power and strength of a Busse Heat Treat on Elmax Steel. The Cerakote coating cover not only the blade but the Handles and protects it. Because the actual handle is covered, you can not see what the handle material is and will either be G10 or Canvas Micarta. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives! This knife will carry a lifetime warranty from Busse Combat! This one is new and a Super Rare find because they only made 12 in this color combination! Never Used, Carried or Sharpened!

    $415
     
    Last edited: Nov 14, 2017
  12. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Elmax Steak Knife Red/Black Cerakoted .09" Hollow Saber Ground Blade, Textured Handle (1 of 8)
    Long Elmax Steak Knife
    4.8" Blade Length 9.25" Overall Length .7" Blade Width .09" Blade Thickness 4.1 Ounces
    Hollow Saber Ground Red/Black Cerakote Coated Blade with a V-Ground Edge
    Textured Canvas Micarta or G10 Handle with Cerakote Coating
    Elmax Blade Steel, Small Choil
    This was Brand New from the 2015 Blade Show in Atlanta Ga an Exclusive for ONLY this show! I believe there were only 8 made so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore.

    The Elmax Steak Knife was introduced by Busse at the 2013 Blade Show and has long been since discontinued. There are three different length of the Elmax Steak Knife made by Busse Combat Custom Shop and this is the longest version. So for the 2015 Blade Show, the Busse Custom Shop wanted to do something different so took 8 of these long Elmax Steak Knives and had them cerakoted with the Red/Black pattern. This knife is one of the rare knives that Busse didn't use INFI Steel on, this one is made of Elmax Steel and is super thin and even Sharper! This thin blade makes it the perfect slicer and with the power and strength of a Busse Heat Treat on Elmax Steel. The Cerakote coating cover not only the blade but the Handles and protects it. Because the actual handle is covered, you can not see what the handle material is and will either be G10 or Canvas Micarta. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives! This knife will carry a lifetime warranty from Busse Combat! This one is new and a Super Rare find because they only made 8 in this color combination! Never Used, Carried or Sharpened!

    $415
     
  13. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Nuclear Hell Razor .20" Black Crinkle Saber Ground Blade with Sharpened Top, Magnum Textured Orange/Black G10 Handle
    Hell Razor - HR
    6.75" Blade Length 12.45" Overall Length 1.75" Blade Width .20" Blade Thickness 15.7 Ounces
    4" Sharpened Top Spine w/4 Teeth (Serrations)
    Saber Ground Black Crinkle Coated Blade with V-Ground Edge
    Magnum Textured Orange/Black G10 Handle
    INFI Blade Steel, Full Size Choil with and No CBT (Corrugated Bevel Technology)
    This is Brand New purchased directly from Busse Combat at the 2014 Fall Knob Creek Show in KY. The Hell Razor Model has been discontinued so can no longer be order from the Busse Company Website! This is Brand New purchased directly from Busse Combat.

    Back in 2005 when the Hell Razor was introduced by Jerry Busse, all of the Hell Razor models came with the CBT (Corrugated Bevel Technology) except for the few Mud Razors that were produced. All of the Hell Razors Models have long since been discontinued even thought many people loved this model. There were only a few variants of these made without the CBT (Corrugated Bevel Technology), and this one is one of them. This is even more special because it has a free hand ground Sharpened Front Top Edge with Teeth or otherwise known as serrations. The Busse Custom Shop must have found a blank laying around and custom make this one special. This Nuclear Hell Razor has a very sharp custom Top edge with Serrations. This one has a custom Free Hand Ground Custom Hollow Ground Sharpened Top Edge on the front of the blade. This is a one of a Kind Custom Made Knife for the Hardcore Busse Collector! The handles are Magnum Textured Orange/Black G10 Handle. This Blade is a bit thicker than the original Hell Razor which only makes it much more of a Heavy Duty Blade. This was purchased directly from Busse Combat by myself and is Brand New: never used, carried or sharpened.
    $900
     
  14. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Emerson Bulldog BT Plain Edge Knife Black Coated Blade w/Wave Black G10 Handle
    Blade Length: 3″
    Handles: Black G-10 epoxy / glass laminate
    Overall Length: 7.45″
    Handle Length: 4.35″
    Blade Thickness: .125″
    Hardness: 57-59 RC
    Blade: 154CM
    Lock: Aerospace grade Titanium
    Finish: Black Cerakote
    Grind: Chisel Ground
    Pocket Clip: Right Hand Tip Up
    Weight: 4.8 Ounces
    Standoffs
    Serial Number #0333
    Lanyard Hole
    With Wave (Emerson Opener)
    Made in USA
    Here is a New in Box Emerson Bulldog where you actually see the actual knife you are getting and not a stock photo. This one has a lower serial number of #333. Smooth opening action with early lockup. There is no blade play in any direction with a solid lockup. Nice blade centering. This will have one of the strongest warranties in the industry. This is Brand New, never used carried or sharpened. This will come with the Factory box, pamphlet and baggie. The lable on the box has been torn off.
    $200
     
  15. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Ratweiler .20" Saber Ground Midnight Blue Blade, Magnum Textured Black/Tan G10 Handle
    Blade Length: 7.7”
    Blade Width: 1.8”
    Blade Thickness: .20”
    Overall Length: 13.3”
    Grind: Saber with V-Ground Edge
    Steel: SR101 58-60Rc
    Weight: 18.6 Ounces
    Saber Ground Midnight Blue Coated Blade w/V-Ground Edge
    Magnum Textured Black/Tan G10 Handle
    This is Brand New straight from Swamp Rat Knife Works!

    Here is a Ratweiler made by the Swamp Rat Knife Works! This is similar to the Chopweiler which was an older model. But along with time comes change along with improvements. This has a Flat Ground Saber Grind with a Razor Sharp V-Ground Edge. This is coated with the new color that has come out from the 2017 Blade show called Forest Green. This has a metallic finish that is more of a two toned, and looks different from different angles. This is matched up with a Magnum Textured Black/Tan G10 Handle! A terrific color combination! I purchased this directly from Busse Combat which is the sister company of Swamp Rat Knife Works! This has a SR101 Steel that is .20" thick! This knife will carry a lifetime warranty from Swamp Rat Knife Works! This is Brand New as directly from Busse so it was never used carried or Sharpened!

    $315
     
  16. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Short American Butaniku Sword .255" Saber Ground Red/Black Cerakoted w/Fuller, Textured Handle
    Short American Butaniku
    23.7" Blade Length 35.90" Overall Length 1.2" Blade Width .255" Blade Thickness 39.7 Ounces
    Flat Saber Ground Red/Black Cerakoted Blade with Fuller and V-Ground Edge
    Textured Canvas Micarta or G10 Handle with Cerakote Coating
    INFI Blade Steel, Full Size Choil, and Fuller (Blood Groove)
    This was Brand New purchased directly from the 2015 Blade Show in Atlanta Ga an Exclusive for ONLY this show! I believe there was only one of these made so was not in the offering but on the table to be purchased! The Short American Butaniku has been discontinued and can not be ordered from Busse so get this rare Grail Sword now!

    This Short American Butaniku Sword is a beautiful knife made by Busse Combat Custom Shop. This model was made because some people thought that the full size Butaniku was too long and heavy. So after much feedback from many people on the forums, the Busse Combat Custom Shop created this beauty. I think many would say that the weight and balance of this sword is much better now. The problem is that this was never a production Sword, only a few of these were ever made and only to shows and some online ganzas. This Saber Ground Blade with a V-Ground Edge with a fuller (Blood Groove.) This particular knife was purchased by me directly from Busse Combat at the Blade 2015 Show. There were only one of these made in this with the Red/Black Cerakoted combination. The Cerakote cover not only the blade but the Handles and protects it. Because the actual handle is covered, you can not see what the handle material is and will either be G10 or Canvas Micarta. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked used or dirty but it's supposed to look that way with this cerakote coating. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives! This one is new and a RARE Super Find as only 1 was ever made that I know of! This is Brand New: never used, carried or sharpened.

    $2650
     
    Last edited: Nov 16, 2017
  17. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]Busse Combat Custom Shop Hell Razor Variant .21" Tanker Grey Saber Ground Blade w/Un-Sharpened Swedge, Magnum Textured Black/Tan G10 Handle
    Hell Razor - HR
    6.8" Blade Length 12.5" Overall Length 1.75" (widest point) .21" Blade Thickness 15.91 Ounces
    Saber Tanker Grey Coated Blade with V-Ground Edge and
    Magnum Textured Black/Tan G10 Handle
    INFI Blade Steel, Full Size Choil, No CBT (Corrugated Bevel Technology)
    I purchased this directly from Busse Combat at the Fall Knob Creek 2014 show! The Hell Razor Model has been discontinued so can no longer be order from the Busse Combat!
    Back in 2005 when the Hell Razor was introduced by Jerry Busse, all of the Hell Razor models came with the CBT (Corrugated Bevel Technology) except for the few Mud Razors that were produced. All of the Hell Razors Models have long since been discontinued even thought many people loved this model. There were only a few variants of these made without the CBT (Corrugated Bevel Technology), and this one is one of them. This is even more special because it has a custom Hand Ground Custom Hollow Ground Un-sharpened Swedge on the front of the blade. The Busse Custom Shop must have found a blank laying around and custom make this one special and unlike any others that has ever been produced. This is a one of a Kind Custom Made Knife for the Hardcore Busse Collector! The handles are Magnum Textured Black/Tan G10 Handle. This Blade is a bit thicker than the original Hell Razor which only makes it much more of a Heavy Duty Blade. This was purchased directly from Busse Combat by myself and is Brand New: never used, carried or sharpened.
    $900
     
  18. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Short American Butaniku Sword .26" Saber Ground Black Crinkle Blade w/Fuller, Textured Black Paper Micarta Handle
    Short American Butaniku
    23.7" Blade Length 35.9" Overall Length 1.2" Blade Width .26" Blade Thickness 39.3 Ounces
    Flat Saber Ground Black Crinkle Blade with Fuller and V-Ground Edge
    Textured Black Paper Micarta Handle
    INFI Blade Steel, Full Size Choil, and Fuller (Blood Groove)
    This was Brand New purchased directly from the Busse Combat! The Short American Butaniku has been discontinued and can not be ordered from Busse so get this rare Grail Sword now!

    This Short American Butaniku Sword is a beautiful knife made by Busse Combat Custom Shop. This model was made because some people thought that the full size Butaniku was too long and heavy. So after much feedback from many people on the forums, the Busse Combat Custom Shop created this beauty. I think many would say that the weight and balance of this sword is much better now. The problem is that this was never a production Sword, only a few of these were ever made and only to shows and some online ganzas. This has a Black Crinkly coated Saber Ground Blade with a V-Ground Edge with a fuller (Blood Groove.) This particular knife was purchased by me directly from Busse Combat so nobody else has handles this except me. This has a Textured Black Paper Micarta Handle and who doesn't love a Black on Black knife? This is Brand New: never used, carried or sharpened.

    $2250
     
  19. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Short American Butaniku Sword .255" Saber Ground Black/Grey/White Cerakoted w/Fuller, Textured Handle
    Short American Butaniku
    23.7" Blade Length 35.90" Overall Length 1.2" Blade Width .255" Blade Thickness 40.5 Ounces
    Flat Saber Ground Black/Grey/White Cerakoted Blade with Fuller and V-Ground Edge
    Textured Canvas Micarta or G10 Handle with Cerakote Coating
    INFI Blade Steel, Full Size Choil, and Fuller (Blood Groove)
    This was Brand New purchased directly from the 2015 Blade Show in Atlanta Ga an Exclusive for ONLY this show! I believe there was only one of these made so was not in the offering but on the table to be purchased! The Short American Butaniku has been discontinued and can not be ordered from Busse so get this rare Grail Sword now!

    This Short American Butaniku Sword is a beautiful knife made by Busse Combat Custom Shop. This model was made because some people thought that the full size Butaniku was too long and heavy. So after much feedback from many people on the forums, the Busse Combat Custom Shop created this beauty. I think many would say that the weight and balance of this sword is much better now. The problem is that this was never a production Sword, only a few of these were ever made and only to shows and some online ganzas. This Saber Ground Blade with a V-Ground Edge with a fuller (Blood Groove.) This particular knife was purchased by me directly from Busse Combat at the Blade 2015 Show. There were only one of these made in this with the Black/Grey/White Cerakoted combination. The Cerakote cover not only the blade but the Handles and protects it. Because the actual handle is covered, you can not see what the handle material is and will either be G10 or Canvas Micarta. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked used or dirty but it's supposed to look that way with this cerakote coating. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives! This one is new and a RARE Super Find as only 1 was ever made that I know of! This is Brand New: never used, carried or sharpened.

    $2600
     
  20. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Rick Hinderer Production XM24 Slicer Non-Flipper S35VN Stonewashed Blade/Ti Frameside, Grey G10
    2nd Gen 4" Non-Flipper
    3.9" Blade Length 9.2" Overall Length 1.25" Blade Width .185" Blade Thickness 7.6 Ounces
    Stonewashed Titanium Lock Side/Pocket Clip/Filler Tab/Titanium Liner!
    Blade Marked S35VN for Blade Steel
    Rick Hinderer Horse Logo
    This is Brand New purchased by me in 2012. This will include the original Hinderer box, baggie and tactical peanuts. This has a smooth opening action, Early lockup, centered blade.

    Here is a rare knife, one of the very first Production Hinderer XM24 non-flipper to be made. Great Condition Hinderer Spanto in a Non-Flipper which Rich Hinderer no longer makes. Smooth opening action, Solid lockup, with a centered blade. I don't believe Rick is doing this Slicer Grind anymore nor is he doing non-flippers so this ia a very hard knife anymore. This is a Super knife and one of my Favorites and to find this with the Stonewashed finish which shows less marks when carried and used! Lots of people love the Stonewashed finish and was the default go to finish. This knife is New in Box and in Dead Mint condition and holds a warranty from Rick Hinderer knives. Here is your chance to own a beautiful piece of History!
    $1000
     

Share This Page