1. **ATTENTION** If you are still having trouble logging in (Resetting your password should do "the trick") OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! (Yelling/whisper voice implied there for *effect*)
    Dismiss Notice

Thread of New Knives Updated Daily

Liu Kang Feb 13, 2017

  1. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Long Two Handed Gladius .29" Convexed Satin Blade w/Fuller, Hand Smoothed Red/Black G10 Handle
    23.85" Blade Length 32.9" Overall Length 1.7" Blade Width .29" Blade Thickness 50.5 Ounces
    Double Edged Convexed Satin Finished Blade with a V-Ground Edge
    Hand Smoothed Red/Black G10 Handle
    INFI Blade Steel
    This is Brand New direct from the 2015 Fall Knob Creek Show. The Gladius and Two Handed Gladius has been discontinued. I have a matching Satin Gladius if you want to get a set. Get this while you can.

    This is a SUPER RARE Ultimate Grail from The Busse Combat Custom Shop! Since Busse Combat doesn't release the numbers made, but I would say there are less than 12 ever made! The Satin Gladius was introduced in June 2010 at the Blade Show and a very Limited Production Run Busse by the Combat Custom Shop because it is very labor intensive for the satin finish on this sword and Super Expensive. After receiving it, many people felt it would be much better if it was a longer two handed sword! But the problem was it would cost much more and most could not afford it. But I guess they finally did break down and made a few and was introduced as the first one was made at the Spring 2015 Knob Creek Show. This things is SWEET! The blade length on this is 23.85" which is longer than the overall length of a normal Busse Gladius Sword! The also extended the length of the handle so you can get both hands around it for a more powerful controlled swing! The Fuller on this sword is in Doublecut (Bead Blasted.) Since the Busse Custom Shop has been closed, this has pretty much been discontinued! The Satin Gladius usually has a Double Edged Convexed Satin Blade but this one is Special and has a V-Ground Edge. I prefer the V-Ground Edge which is Razor Sharp! I purchased this directly from Busse Combat so nobody else has ever handled this Beauty before! This has a INFI Steel that is .29" thick with a Beautiful Satin Finish! This has never been used, carried or sharpened! The Cerakote Gladius in the pictures is for size comparison and NOT included in sale.
    $5000
     
  2. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop MOAB .35" Flat Ground Green & Black Cerakoted Blade, Magnum Textured Handle (Not an offering)
    MOAB - Mother of All Bowie
    14.25" Blade Length 20.65" Overall Length 2.3" Blade Width (widest point) .355" Blade Thickness 38.6 Ounces
    Flat Ground Green & Black Cerakoted INFI Blade w/V-Ground Edge
    Textured Magnum Coated Handle (underneath the coating can be either Canvas Micarta or G10)
    INFI Blade Steel with Full Size Choil
    This was Brand New from the 2015 Blade Show in Atlanta Ga and these Cerakoted Blades were Exclusive for ONLY this show! This was the ONLY Green & Black Cerakoted that this I saw at the show and was NOT an offering and had to be grabbed off the table at the beginning of the show! So this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore!
    Jerry Busse made his first prototype of the MOAB in 2003 but introduced this Monster of a Chopper in 2009 when he made only a few for a show and online ganza. These Mother Of All Bowie were never a production knife that could be ordered from Busse Combat. The Busse Custom Shop made each one by hand and hand picked and cut out and hand sharpened. I believe these were all sent out and each one was hand Cerakoted one at a time. The Mother of All Bowie in a Green & Black Cerakoted across the knife is a Flat Ground .35" Blade thickness Monster Chopper! The Cerakote coats not only the blade but the Magnum Handles and protects it. The actual handle material is unknown can be either canvas micarta or G10, and because it is coated, is not known but will still have the lifetime guarantee. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! This is one monster of a chopper, with this being so thick and long, this is one large and heavy Chopper! Here is your only chance to own a "One of a Kind" Green & Black Cerakoted MOAB! This is Brand New, never used, carried or sharpened.

    $2500
     
  3. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop MOAB .35" Aged Bronze Cerakoted Blade Flat Ground Blade, Magnum Textured Handle (1 of 6)
    MOAB - Mother of All Bowie
    14.25" Blade Length 20.65" Overall Length 2.3" Blade Width (widest point) .35" Blade Thickness 38.9 Ounces
    Flat Ground Aged Bronze Cerakoted INFI Blade w/V-Ground Edge
    Textured Magnum Coated Handle (underneath the coating can be either Canvas Micarta or G10)
    INFI Blade Steel with Full Size Choil
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe the Cerakoted Blades were Exclusive for ONLY this show! There were only 6 of these available for the offerings So this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore! The MOAB are not being sold by Busse Combat any more because they have been Sold out and discontinued!

    Jerry Busse made his first prototype of the MOAB in 2003 but introduced this Monster of a Chopper in 2009 when he made only a few for a show and online ganza. These Mother Of All Bowie were never a production knife that could be ordered from Busse Combat. The Busse Custom Shop made each one by hand and hand picked and cut out and hand sharpened. I believe these were all sent out and each one was hand Cerakoted one at a time. The Mother of All Bowie in a Aged Bronze Cerakoted across the knife is a Flat Ground .35" Blade thickness Monster Chopper! The Cerakote coats not only the blade but the Magnum Textured Handles and protects it. The actual handle material is unknown can be either canvas micarta or G10, and because it is coated, is not known but will still have the lifetime guarantee. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! This is one monster of a chopper, with this being so thick and long, this is one large and heavy Chopper! This is Brand New, never used, carried or sharpened.
    $2500
     
  4. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Anniversary Flying Nuclear MoJo .25" Saber Ground Satin Blade, Hand Smoothed Black G10 Handle
    Anniversary MoJo - AM
    8.15" Blade Length 3.25" Sharpened Swedge 14.3" Overall Length 1.65" Blade Width .25" Blade Thickness 19.1 Ounces
    Saber Ground Hand Finished Satin Blade w/Blended Convexed Edge with a Sharpened Swedge w/4 Serrations on the top (Nuclear) and 4 Serrations on the bottom front (Flying)
    Custom Hand Smoothed Black G10 Handle
    INFI Blade Steel, Full Size Choil, Swedge
    This one is Brand New from the 2014 Spring Knob Creek Show in KY! These Anniversary MoJo are not being sold by Busse Combat any more and have been Sold out and discontinued!
    The Anniversary MoJo was introduced in December of 2012 and have since been discontinued. This is a true Custom and very RARE knife made by the Busse Custom shop! The earlier original models introduced by Jerry Busse in 2001 with the Ergo Handles of these was called "Mr. MoJo" and the hook was there for a blade catcher as this was a combat fighting knife! This has a INFI Steel that is .25" thick Satin Finish with a razor sharp w/Blended Convexed Edge! Busse uses the term Flying to refer to the serrations on the front "sweep" of the blade. The term "Nuclear" refers to the sharpened top edge of the spine either with or without serrations. Each of these are hand made with hand picked and custom Hand-Shaped Matched Handle with Finger Grooves! This one has a Custom Contoured Hand Shaped Black G10 Handle Handle with Finger Grooves! This is Brand New: never used, carried or sharpened.

    $1200
     
  5. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Rick Hinderer Spanto 3rd Gen XM18 3.5" Satin Flipper w/Deep Swedge, Cue Ball Anodized Stonewashed Ti, Textured Translucent G10 Scale
    3.4" Blade Length 8.15" Overall Length 1.15" Blade Width .163" Blade Thickness 5.3 Ounces
    Triple Ground, Deep Hollow Ground Satin Finish Spanto Blade with V-Ground Edge
    Custom Hand Un-Marked Duratech 20CV Blade
    Translucent G10 Scale
    Custom Cue Ball Anodized Bead Blasted 6AL4V Titanium Lock Side/Liner
    Blue Anodized 6AL4V Titanium Pocket Clip, Filler Tab, and Backspackers
    Third Generation with with the stop pin next in the middle of the lock side.
    This will come with the original Baggie and that is it. This is Brand New from a personal collection that has been safe queen.

    This is from the rare early Hinderer 3rd Generation Flipper with a satin finish. This knife went into a private collection where it was handled but never used carried or sharpened. This is beautiful rare and a full custom from a hand ground custom Hollow triple ground Spanto Deep Hollow Ground blade with a swedge along the spine. This is a "One of a Kind" and there is not another one like it in this world! This thing has ultra smooth flipping action with a solid lockup and a centered blade. This has a hand applied Satin Finish on the blade. And according to all the posts since this is an Un-Marked Blade, the blade steel is Duratech 20CV. The amazing thing that really stands out about his knife is the Custom Cue Ball Anodized Bead Blasted 6AL4V Titanium Lock Side and Liner. This has matched Blue Anodized Bead Blasted 6AL4V Titanium Pocket Clip, Filler Tab and Backspacers. You can tell a lot of time and thought went into the making of this knife. This is exactly how it came directly from Rick Hinderer in this finish. This has a nice strong detent so the blade with fly out when the blade is engaged. This will come with only baggie. This is Brand New: never used, carried or sharpened.

    $2400
     
    Last edited: Sep 3, 2017
  6. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat SJTAC .225" Flat Ground Satin Blade, Textured Jungle Storm G10 Handle
    SJTAC - Satin Jack Tactical
    6.4" Blade Length 11.8" Overall Length 1.45" Blade Width .22" Blade Thickness 14.9 Ounces
    Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Textured Jungle Storm G10 Handle
    INFI Blade Steel, Full Size Choil & Skull Crusher
    This is Brand New from about 2009. The SJTAC - Satin Jack Tactical has been discontinued by Busse Combat and now now long available and can no longer be ordered so get this before it's gone!

    The Satin Jack Tactical SJTAC was introduced in 2004 by Busse Combat and have since than been discontinued. The original SJTAC has a shorter blade and overall length and had a full height Convexed Blade. that was about 13 years ago, since then they have refined the design and this is what the Busse Custom Shop has come up with. This has a longer blade and overall length. It is now a Flat Ground Blade with a V-Ground edge that is Razor Sharp. This has a Textured Jungle Storm G10 Handle which was only available about 2009. This has a INFI Steel that is a incredible .22" thick with a Hand Finished Satin Blade which was not a production knife so this was either from a show that Busse Combat or a online Ganza! This was a very special knife that was only made for that one show/ganza and never again! This is Brand New, never used, carried or sharpened.

    $1000
     
  7. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Jim Burke Damascus Runt .125" Two-Toned Saber Ground Damascus Blade, Two-Toned Blue/Gold Anodized Titanium Handle
    Blade Length: 2.5″
    Overall Length: 6″
    Blade Thickness: .125"
    Blade Width: 1.4"
    Weight: 3.9 Ounces
    Handle Material: Stonewashed Two-Toned Blue/Gold Anodized Titanium Handle
    Back Spacer: Bead Blasted Zirconium
    Clip: 3-D Milled Tip-Down Carry Pocket Clip
    Two-Toned Saber Ground Damascus Blade with V-Ground Edge

    This is a Brand New Jim Burke Damascus Runt knife that has been discontinued! This beautiful knife is a midtech and there were not many made. This is one has a beautiful Two-Toned Saber Ground Damascus Blade with a swedge to show off more of the Damascus! The Jim Burke Runt model are short and stubby so it still fits in your hand well but meet most the custom knife world. The action along with the fit and finish stands out from all the others. You can tell a lot of thought and planning went into the making of this knife. The contrast is really creative and beautiful in the Two-Toned Saber Ground Damascus Blade. Even the handle has a Two-Toned Blue/Gold Anodized Titanium Handle with more blue on the edges along with some flakes in the throughout the Stonewashed Gold Anodized Titanium Handle. This also has two Gold Anodized Titanium. Nice detent, Solid Lockup and centered blade seating. Comes with Black zipper knife case for storage or travel. This has an Early Lockup with centered blade. This has a smooth flipping/opening action with a centered blade, solid early lockup and original edge. This is in Dead Mint Condition and has never been used, carried or been sharpened.

    $800
     
  8. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Rick Hinderer Hinderer Fieldtac 5.75" S35VN Black-Wash Spearpoint Blade, Textured Earth Brown G10 w/Olive Green Camo Spec-Ops Sheath
    5.5" Blade Length
    10.65" Overall Length
    1.3" Blade Width
    .227" Blade Thickness
    10.3 Ounces

    Flat Saber Ground Black Wash Finish Blade with V-Ground Edge
    Textured Earth Brown G10 Handle
    S35VN Blade Steel, Full Size Choil, Swedge, Rich Hinderer Horse Logo
    "Blackwash" which is first DLC Coated than stonewashed
    Olive Green Camo Spec Ops
    Brand New in Mint condition with Sheath.

    "Blackwash" blade finish is a completely different look from the same old same old of bright, satin and stonewashed finishes we’re used to seeing. It’s a weathered black stonewashed look, that’s a little more practical.

    Here is a Brand New and considered semi-custom. This is not hand ground but I believe to be one of very few prototype made with the "Black-washed" finish. This uses the main steel Rick Hinderer is using now which is the S35VN Steel which is also marked on the blade. As you can see from the pictures, the one has the Rich Hinderer Horse Logo marked on the blade so you know this is authentic, because trying to find one of these in a blackwash will be very hard. I believe that Rick Hinderer wanted to see what this finish would look like on this knife so made this one sort of as a prototype and it never went into production or were ever made. This is exactly how it came like directly from the Hinderer Ranch. This finish will hide most scratches and light scratches or any light use. This has the standard Textured Earth Brown G10 Handle and comes with a Olive Green Camo Spec-Ops Sheath. This knife is Brand New, and has never been used, carried or sharpened.

    $800
     
  9. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CS323 Busse Combat Custom Shop S.L.U.T. Active Duty .22" Deep Hollow Satin Blade, Black G10 G-rexed Green Mammoth Tooth w/White Liners & Mosaic Pins
    Active Duty S.L.U.T. Super Lightweight Ultra Thick
    3.55" Blade Length 7.85" Overall Length 1.05" Blade Width .22" Blade Thickness 5.7 Ounces
    Hand Ground Full Height Deep Hollow Ground Satin Finished Blade with V-Ground Edge
    Custom Hand Smoothed Black G10 G-rexed Green Mammoth Tooth w/White Liners & Mosaic Pins
    INFI Blade Steel, Small Choil
    This is Brand New directly from 2011 Spring Knob Creek Show in KY. The Active Duty have long since been discontinued and have been Sold out so get this now while you can!

    The Active Duty knives were introduced in 2002 and have since been discontinued. This S.L.U.T. was introduced in 2011 and than was discontinued right away but never was a production knife since a few were made for the Ganza and two knife shows. This has a Deep Hollow ground and this one weighs 5.7 ounces because a lot of steel was removed from this model but the handles are thick. The handle are hollowed out while the blade has a super sharp Deep Hollow Grind. This has an incredible feel in the hand because of the thickness of the blade! This one is made of INFI Steel. This one is new and custom made by hand by the Busse Custom Shop, a RARE Super Find since there were only a handful made with custom handles. This one has Black G10 G-rexed Green Mammoth Tooth finished off with w/Mosaic Pins & White Liners and each one is hand custom made by the Busse Custom shop. Each piece of the matched set of Mammoth Tooth is different so each one is "One of a Kind"! As with all Busse Combat knives, this carries a Lifetime Warranty for the life of the knife from Busse Combat! This is Brand New, never used, carried or sharpened and comes from my own personal collection.
    $1350
     
  10. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, Full Spalted Maple Handle w/Black G10 Liners & Mosaic Pins
    Active Duty - AD
    3.6" Blade Length 7.85" Overall Length 1" Blade Width .165" Blade Thickness 5.7 Ounces
    Saber Ground Blade with a V-Ground Edge
    Custom Hand Smoothed Full Spalted Maple Handle w/Black G10 Liners & Mosaic Pins
    INFI Blade Steel, Small Choil
    This is Brand New directly from Fall Knob Creek 2015 Knife Show in KY. The Active Duty have long since been discontinued and have been Sold out so get this now while you can!

    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Smoothed Full Spalted Maple Handle finished off with Black G10 Liners & Mosaic Pins. This is not only Beautiful by sight but also feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! You will never see another even close to this and can see a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! This is Brand New, never used, carried or sharpened.

    $550
     
  11. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, Full Green/Tan Mammoth Tooth Handle w/Mosaic Pins & Green Liners
    Active Duty - AD
    3.6" Blade Length 7.85" Overall Length 1" Blade Width .165" Blade Thickness 6.4 Ounces
    Saber Ground Blade with a V-Ground Edge
    Custom Hand Smoothed Full Green/Tan Mammoth Tooth Handle w/Mosaic Pins & Green Liners
    INFI Blade Steel, Small Choil
    This is Brand New directly from Fall Knob Creek 2015 Knife Show in KY. The Active Duty have long since been discontinued and have been Sold out so get this now while you can!

    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. This has a INFI Steel that is .165" thick with a Satin Finish! The Busse Custom Shop went all out on the handle and made a Custom Hand Smoothed Full Green/Tan Mammoth Tooth Handle finished off with Mosaic Pins & Green Liners. This is not only Beautiful by sight but also feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! You will never see another even close to this and can see a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! This is Brand New, never used, carried or sharpened.

    $1000
     
  12. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Rick Hinderer Custom XM18 4th Gen 3.5" Bowie Satin Flipper, Stonewashed Full Titanium Handles
    3.5" Blade Length 8.2" Overall Length 1.1" Blade Width .165" Blade Thick 5.3 Ounces
    3.5" Hollow Hand Ground Satin Finish Bowie Flipper
    Black G10 Scale
    Custom Hand Ground Satin Finished Laser Engraved Hollow Ground S35VN Blade
    Blue Anodized Finish Stonewashed Finish 6AL4V Titanium Lock Side, Liner, Lock Bar Stabilizer, Pocket Clip and Filler Tab
    Modular Backspacer System H.M.B.S. is made from solid aluminum with a Blue Anodized finish Backspacer & Hardware.
    4th Gen with the Blade Stop next to the Pivot.
    Rick Hinderer Custom Logo marked on the blade.
    This is Brand New directly from the 2016 Blade Show in Atlanta Ga.
    Here is a Fresh New one from the Saturday Hinderer Lottery at Blade 2016!
    Smooth opening action, Solid early lockup with a centered blade. This has a nice strong detent so the blade with fly out when the blade is engaged. This will come with a Hinderer Box autographed by Rick Hinderer at the Blade 2016 which is where this knife is from, Zip lock baggie and tactical peanuts. This was never used, carried or sharpened! DEAD MINT!
    $2700
     
  13. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Fatback Defenders .32" Saber Hollow Ground Satin Blade, Magnum Textured Blue/Black G10 Handle
    Fatback Defenders - FD
    4.35" Blade Length 9.05" Overall Length 1.05" Blade Width .32" Blade Thickness 11.4 Ounces
    Hand Ground Saber Hollow Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Magnum Textured Blue/Black G10 Handle
    INFI Blade Steel at 58-60Rc with Choil and Swedge
    This Fatback Defender model was available for sale starting April 27th 2016 through May 5th, 2016 and has been discontinued so can no longer be order from the Busse Combat.
    The original Public Defender was introduced by Jerry Busse in 2002. This was a really cool knife with only a 4.5" blade at about .187" thick. This is about as close to a Tanto Blade as you were going to get from Busse Combat. Well, fast forward 14 years later, Busse takes the design and adds an Ergo Handle to the design and makes it in three versions. The versions are Ergo Public Defender Limited Edition, the Ergo Public Defender Battle Grade and the thick version of the Fatback Defender! Garth Reckner first introduced the Fatback Defender has been discontinued. You will notice these were offered through the Busse Custom Shop because these were all done by hand. These have a custom Deep Hollow Ground Blade all done by hand. There is a very fine V-Ground Edge and a Hand Finished Satin Blade. This has such a thick blade that I had that I had to add a spine shot to my normal pictures! This was was made with the Magnum Textured Blue/Black G10 Handle. This was part of "Operation 2 Weeks!" There were very few ever made, so get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for a few days and than discontinued. This is Brand New, never used, carried or sharpened.
    $880
     
  14. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Fatback Defenders .322" Saber Hollow Ground Satin Blade, Magnum Textured Orange/Black G10 Handle
    Fatback Defenders - FD
    4.35" Blade Length 9.05" Overall Length 1.05" Blade Width .32" Blade Thickness 11.7 Ounces
    Hand Ground Saber Hollow Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Magnum Textured Orange/Black G10 Handle
    INFI Blade Steel at 58-60Rc with Choil and Swedge
    This Fatback Defender model was available for sale starting April 27th 2016 through May 5th, 2016 and has been discontinued so can no longer be order from the Busse Combat.
    The original Public Defender was introduced by Jerry Busse in 2002. This was a really cool knife with only a 4.5" blade at about .187" thick. This is about as close to a Tanto Blade as you were going to get from Busse Combat. Well, fast forward 14 years later, Busse takes the design and adds an Ergo Handle to the design and makes it in three versions. The versions are Ergo Public Defender Limited Edition, the Ergo Public Defender Battle Grade and the thick version of the Fatback Defender! Garth Reckner first introduced the Fatback Defender has been discontinued. You will notice these were offered through the Busse Custom Shop because these were all done by hand. These have a custom Deep Hollow Ground Blade all done by hand. There is a very fine V-Ground Edge and a Hand Finished Satin Blade. This has such a thick blade that I had that I had to add a spine shot to my normal pictures! This was was made with the Magnum Textured Orange/Black G10 Handle. This was part of "Operation 2 Weeks!" There were very few ever made, so get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for a few days and than discontinued. This is Brand New, never used, carried or sharpened.
    $900
     
  15. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Fatback Defenders .32" Saber Hollow Ground Satin Blade, Magnum Textured Black/Tan G10 Handle
    Fatback Defenders - FD
    4.35" Blade Length 9.05" Overall Length 1.05" Blade Width .32" Blade Thickness 11.7 Ounces
    Hand Ground Saber Hollow Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Magnum Textured Black/Tan G10 Handle
    INFI Blade Steel at 58-60Rc with Small Choil
    This Fatback Defender model was available for sale starting April 27th 2016 through May 5th, 2016 and has been discontinued so can no longer be order from the Busse Combat.
    The original Public Defender was introduced by Jerry Busse in 2002. This was a really cool knife with only a 4.5" blade at about .187" thick. This is about as close to a Tanto Blade as you were going to get from Busse Combat. Well, fast forward 14 years later, Busse takes the design and adds an Ergo Handle to the design and makes it in three versions. The versions are Ergo Public Defender Limited Edition, the Ergo Public Defender Battle Grade and the thick version of the Fatback Defender! Garth Reckner first introduced the Fatback Defender has been discontinued. You will notice these were offered through the Busse Custom Shop because these were all done by hand. These have a custom Deep Hollow Ground Blade all done by hand. There is a very fine V-Ground Edge and a Hand Finished Satin Blade. This has such a thick blade that I had that I had to add a spine shot to my normal pictures! This was was made with the Magnum Textured Black/Tan G10 Handle. This was part of "Operation 2 Weeks!" There were very few ever made, so get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for a few days and than discontinued. This is Brand New, never used, carried or sharpened.
    $890
     
  16. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Todd Rexford RUT, Working Finish with Grooved Mokume Overlay

    This is pre-owned in Excellent Condition.
    This will also come with a Eric Savitsky Design Cozy to fit Todd Rexford Rut.

    The Todd Rexford RUT is great for EDC carry and is a well-thought out process. The goal is to be prepared no matter the situation. Whether you need to open a letter, pull out a splinter in the field, or cut through a tough material in an emergency. Eventually though, too many pieces in your kit will weigh you down. Enter this compact multi-tool -- the perfect sidekick to enhance the life and utility of your EDC knife. While a knife’s blade can dull out and tends to be more durable than sharp, the RUT - short for Rexford Utility Tool - is a super practical tool with a minimal pocket footprint that allows you to handle tasks where a sharp edge is key. Rexford goes above and beyond to make this tool easy to access with an oversized lanyard hole for carry, and four screws to easily take the tool apart so it can be serviced. It is designed to fit standard utility razors which can be switched out as they dull enhancing the practicality even more.

    Todd Rexford’s love of knives and the machining process was instilled in him by his father from a young age. He graduated with an engineering degree and has been making knives ever since. Rather than stick with one process that he knows works, Rexford has dedicated himself to constantly improve his work by keeping up-to-date on new materials and procedures. His experience, discipline and thirst for knowledge ensures his designs, styles, and machining processes are always cutting edge and trusted the world over by in-the-field operatives.
    Features:
    Style: Compact Utility Tool
    Finish: Hand Rubbed Flats, Beadbast/Stonewash
    Material: 6AL4V Titanium
    Length: 3.50” (8.89 cm)
    Wide: 0.94” (2.39 cm)
    Thickness: 0.19” (0.48 cm)
    Stanley Utility Razor Blade
    Bottle Opener
    Pry Tool
    Made in the USA
    This was a custom one of a kind made for the a knife show. This is Pre-owed so I am listing this as used. Because this is pre-owned, I am selling as is. Please look carefully at the pictures, this is guaranteed to work and function without any issues.

    $1100
     
  17. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Fatback Defenders .32" Saber Hollow Ground Satin Blade, Magnum Textured Red/Black G10 Handle
    Fatback Defenders - FD
    4.35" Blade Length 9.05" Overall Length 1.05" Blade Width .32" Blade Thickness 11.5 Ounces
    Hand Ground Saber Hollow Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Magnum Textured Red/Black G10 Handle
    INFI Blade Steel at 58-60Rc with Small Choil
    This Fatback Defender model was available for sale starting April 27th 2016 through May 5th, 2016 and has been discontinued so can no longer be order from the Busse Combat.
    The original Public Defender was introduced by Jerry Busse in 2002. This was a really cool knife with only a 4.5" blade at about .187" thick. This is about as close to a Tanto Blade as you were going to get from Busse Combat. Well, fast forward 14 years later, Busse takes the design and adds an Ergo Handle to the design and makes it in three versions. The versions are Ergo Public Defender Limited Edition, the Ergo Public Defender Battle Grade and the thick version of the Fatback Defender! Garth Reckner first introduced the Fatback Defender has been discontinued. You will notice these were offered through the Busse Custom Shop because these were all done by hand. These have a custom Deep Hollow Ground Blade all done by hand. There is a very fine V-Ground Edge and a Hand Finished Satin Blade. This has such a thick blade that I had that I had to add a spine shot to my normal pictures! This was was made with the Magnum Textured Red/Black G10 Handle. This was part of "Operation 2 Weeks!" There were very few ever made, so get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for a few days and than discontinued. This is Brand New, never used, carried or sharpened.
    $880
     
  18. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Baby Boom .159" Flat Saber Ground Satin Blade, Full Hand Smooth Grape Vine Handle w/Mosaic Pins & Orange Liners
    BB - Baby Boom
    3.3" Blade Length 7.5" Overall Length 1.5" Blade Width .159" Blade Thickness 6.1 Ounces
    Flat Saber Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Full Hand Smooth Grape Vine Handle w/Mosaic Pins & Orange Liners
    INFI Blade Steel
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. This is a one of a kind as they have not ever used this handle on this model knife before. The Baby Boom was a part of the "Operation Two Weeks!" but now is no longer available for sale through Busse Combat because it's Sold Out, and has been Discontinued!
    The Baby Boom was introduced by Jerry Busse in February of 2016 and has since been discontinued. This is one of the models available in the "Operation Two Weeks" which was available for pre-order Starting February 24, 2016 through February 29, 2016. This more like a Mini cleaver with an Active Duty handle shape. This one is a Full Blown Custom was made by the Busse Custom Shop just for the 2017 Blade Show! This started with a .161" thick Flat Saber Ground Hand Finished Satin Blade and Finished it off with a V-Ground Edge which is Razor Sharp! The Busse Custom Shop really outdid themselves with the Custom Full Hand Smooth Grape Vine Handle finished off with Mosaic Pins & Orange Liners. It's the little things if you look closely at this knife that will impress you, like they filled in the Grape Vine handles has some clear Orange/Red resin on each side so you can see light go through which matches the Orange Liners. You will never see another even close to this and can see a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! This is Brand New, never used, carried or sharpened.This is Brand New, never used, carried or sharpened.

    $520
     
  19. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Son of Swat .16" Saber Ground Satin Blade, Hand Smooth Orange/Black G10 G-rexed Clear Ram's Horn w/German Nickle Silver Tubes & Yellow Liners
    SOS - Son of Swat
    4.4" Blade Length 9.2" Overall Length 1.15" Blade Width .16" Blade Thickness 7.4 Ounces
    Flat Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smooth Orange/Black G10 G-rexed Clear Ram's Horn w/Yellow Liners & German Nickle Silver Tubes Filled with Clear Yellow Resin
    INFI Blade Steel, Small Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The Son of Swat has been discontinued by Busse Combat and now now long available and can no longer be ordered so get this before it's gone!
    The Son of Swat was introduced by Garth Reckner in April of 2016 and has since been discontinued. This is one of the models available in the "Operation Two Weeks!" Here is what he said about this knife:

    SWAT Snipers, whose team members carry the SwatManDu, requested the same level of performance in a much lighter, narrower, and compact package due the special conditions they face.
    This request was answered with the Son Of Swat (SOS)

    This one is a Full Blown Custom was made by the Busse Custom Shop just for the 2017 Blade Show! This started with a .16" thick Flat Saber Ground Hand Finished Satin Blade and Finished it off with a V-Ground Edge which is Razor Sharp! The Busse Custom Shop really outdid themselves with the Custom Hand Smooth Orange/Black G10 G-rexed Clear Ram's Horn Handle finished off with Yellow Liners & German Nickle Silver Tubes Filled with Clear Yellow Resin. It's the little things if you look closely at this knife that will impress you, like you can see through the clear Ram's Horn and see the Yellow Liners beneath which matches with the Clear Yellow Resin in the German Nickle Silver Tubes. You will never see another even close to this beauty. You can tell a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! This is Brand New, never used, carried or sharpened.
    $570
     
  20. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,052
    79
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat SHBA .241" Flat Ground Smooth Black Blade, Hand Smooth Magnum Black Canvas Micarta Handles w/Slotted Bolts, Black Kydex Sheath
    SHBA - Straight Handle Badger Attack
    4.7" Blade Length 9.85" Overall Length 1.35" Blade Width .32" Blade Thickness 11.4 Ounces
    Flat Ground Smooth Black Coated Blade with a V-Ground Edge
    Smooth Hand Shaped Black Canvas Micarta Handles
    INFI Blade Steel, Smooth Black Coating, Small Choil, Doublecut Spine (above and Below Handle) 3 Slotted Bolts
    This is Brand New from a private collection. The Straight Handle Badger Attack are not being sold by Busse Combat any more and have been Sold out and discontinued!
    Well here is a Super Rare piece of Busse history with an original Straight Handle Badger Attack, this knife was introduced in the late 1990's and some were made in early 2000's. The early ones were made with A2 blade steel and the later ones were made of INFI Steel! The rule of thumb among Busse collectors is to look at the Ricasso and if it looks like it's smooth underneath, than it's probably A2, but if you see little dimples and bumps, it's probably the INFI Dimples and the steel is probably INFI. I had Busse Combat verify the steel on the knife and it is indeed INFI! This knife has the old school smooth black coating which can no longer be reproduced and has the V-Ground Edge! The Doublecut finished spine is only around handles, it is still black coated at the butt of the knife and on the spine of the actual blade! This will come with a Black Kydex Sheath which may be the factory sheath it came with at that time. This is pre-owned in excellent condition as you can see from the pictures and being sold as used, please look at the pictures carefully as this is what you are getting. You will never see another even close to this beauty.

    $1300
     

Share This Page