1. **ATTENTION** If you are still having trouble logging in (Resetting your password should do "the trick") OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! (Yelling/whisper voice implied there for *effect*)
    Dismiss Notice

Thread of New Knives Updated Daily

Liu Kang Feb 13, 2017

  1. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Boss Jack .18" Full Height Convexed Satin Blade, Hand Smoothed Black Canvas Micarta G-rexed Maple Handle w/Yellow Liners & German Nickle Silver Tubes
    Boss Jack - BJ
    6.25" Blade Length 11.3" Overall Length 1.2" Blade Width .18" Blade Thickness 9.8 Ounces
    Full Height Convexed Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Hand Smoothed Black Canvas Micarta G-rexed Maple Handle w/Yellow Liners & German Nickle Silver Tubes
    INFI Blade Steel, Full Large Choil and Nuclear Meltdown Treatment on the Spine and Edges
    This is Brand New directly from 2017 Blade Show in Atlanta GA. These Boss Jack have been discontinued and have been Sold out so get this now while you can!

    In 2010 Jerry Busse introduced the Boss Jack and they were a great hit because of the size and these were similar to the Straight Handle Satin Jack but with a newer twist. The Boss Jack models were available for order for a bit and than discontinued. At that time, the .22" thick Boss Jacks were only Prototype so this was using one of those blanks and has the full INFI Steel that is .22" thick with Convexed Blade! The Boss Jack then became a production and the Combat Grade were .22" Full Height Convexed Blade and the Limited Editions were .18" Flat Saber Ground Hand Finished Satin Blades. So this is the first time I have ever seen a .18" Full Height Convexed Hand Finished Satin Blade with a very find V-Ground Edge on a Boss Jack! the Busse Custom Shop went all out and made this with a Custom Hand Smoothed Black Canvas Micarta G-rexed Maple Handle and finished it all off with Yellow Liners & German Nickle Silver Tubes. The German Nickle Silver Tubes were filled in with a neon green resin to really stand out. . I have never seen anything like this handle and you can tell a lot of time and work has gone into the thought and work of making this Rare Beauty. A real combination of the old style with some new invasions and beauty from the custom shop. INFI is a proprietary Steel is used ONLY by Busse Combat. This knife will carry a lifetime warranty from Busse Combat! Here is your chance to own a beautiful piece of History! This is Brand New: never used, carried or sharpened.
    $1000
     
  2. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Max Duty .092" Saber Hollow Ground Satin Blade, Hand Smooth Grey G10 G-rexed Maple Wood Handle w/German Nickle Silver Tubes
    Active Duty - AD
    3.55" Blade Length 7.7" Overall Length 1" Blade Width ..092" Thickness 4.5 Ounces
    Saber Hollow Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Smooth Grey G10 G-rexed Maple Wood Handle w/German Nickle Silver Tubes filled in with Orange Resin
    ElMax Blade Steel, Small Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The Max Duty and Active Duty is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. The MAX Duty were introduced by Busse Combat at the Blade 2014 and very models were produced as these were not a normal production run. The reason for using the new Elmax steel is because for how thin the blade is, the Busse Combat heat treat makes it really strong and have great edge retention so it will stay sharper for longer periods of time with use without having to sharpen as often. The Max Duty was only made in a small run in certain color combinations for certain Ganzas and Shows! This has a Saber Hollow Ground Hand Finished Satin Blade with V-Ground Edge that is Razor Sharp! The Busse Custom Shop made this beautiful custom just for the 2017 Blade Show. They went all out and really did well with the Custom Hand Smooth Grey G10 G-rexed Maple Wood Handle finished off with German Nickle Silver Tubes filled in with Orange Resin. You can see a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! It's the little things if you look closely at this knife that will impress you, like they filled in the German Nickle Silver Tubes with clear Orange resin so you can see light go through it. This is Brand New, never used, carried or sharpened.

    $440
     
  3. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Meaner Street .24" Flat Ground Satin Blade, Full Hand Smoothed Grey Giraffe Bone Handle w/Thick Yellow Liners & German Nickle Silver Tubes
    Meaner Street - MS
    3.9" Blade Length 8.6" Overall Length 1" Blade Width .24" Blade Thickness 6.2 Ounces
    Flat Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Full Hand Smoothed Grey Giraffe Bone Handle w/Thick Yellow Liners & German Nickle Silver Tubes filled with Neon Yellow Resin
    INFI Blade Steel with Small Choil.
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The Meaner Street has been discontinued by Busse Combat and now no longer available to be ordered so get this before it's gone!
    The Meaner Street was introduced by Jerry Busse in 2004 and has long since been discontinued. This model was such a great model that they did many different version of this with different thickness and/or handles and grinds. Many people collect these so there are not many around and highly prized by the collectors. So the Busse Combat Custom Shop went all out and made this one of a kind full custom just for the 2017 Blade Show and I was able to grab this before anyone else. This one is very thick and comes in on my micrometer at .24" thick with a Flat Ground, V-Ground Edge. This is a very beefy knife. They did go out out on this set of handles and chose to go with a Custom Full Hand Smoothed Grey Giraffe Bone Handle finished off with Thick Yellow Liners & German Nickle Silver Tubes filled with Neon Yellow Resin. You will never see another even close to this and can see a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! This is Brand New, never used, carried or sharpened.

    $1000
     
    seandavid55 likes this.
  4. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Fellhoelter/Kelly Confluence Collaboration Stellite Core Damascus Wharncliffe Blade, Zirconium/Titanium Frame
    Makers: Brian Fellhoelter & Steven Kelly
    Blade Length: 3.2"
    Overall Length: 7.65"
    Blade Thickness: .155"
    Blade Finish: Zirwash
    Handle: Full Hand Rubbed Zirconium Display Side, Bead Blasted Titanium Lock Side
    Blade Steel: Stellite Core Damascus
    Weight: 5.3 Ounces
    Pocket Clip: 3-D Compound-Milled Tip-up Hand Rubbed Zirconium Pocket Clip
    Bronze Anodized Titanium Pivot Hardware, Barbell Back Spacers, Thumb-Disk, & Hardware

    This was Brand New directly from the 2017 Blade Show in Atlanta Ga! This was a collaboration between two knives makers, Brian Fellhoelter & Steven Kelly. There were a few of these Confluence customs brought to the show and they were all completely different and "One of a Kind!" These were for the lottery only and I won the lottery and was able to pick from a few different ones. This was the only one that really stood out, it was the only Full Dressed one I saw with a Saber Ground Stellite Core Damascus Wharncliffe Blade with a swedge. The handle was a Full Hand Rubbed Zirconium Display Side with a matching pocket clip. This has a Bead Blasted Titanium Lock Side and everything is finished off with Bronze Anodized Titanium Pivot Hardware, Barbell Back Spacers, Thumb-Disk, & Hardware. You can tell by looking at this knife that a lot of thought, planning, and work went into this knife. This is Brand New; never used, carried or sharpened and will come with the custom pouch and dog tag. Smooth opening action, with a centered blade, solid early lockup, and original edge. Here is your chance to own a beautiful piece of History!
    $2000
     
  5. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Richard Rogers Custom Axiom, CTS-XHP Blade, Grooved Carbon Fiber Handles
    3.4" Blade Length 8.15" Overall Length .9" Blade Width .16" Blade Thickness 4 Ounces
    Saber Ground Blade with a Fine V-Ground Edge
    3D Grooved Carbon Fiber Handles with Titanium Liners
    CTS-XHP Blade Steel, Swedge, Small Choil, Blue Anodized Fittings
    This was Brand New directly from the 2017 Blade Show in Atlanta Ga!

    Richard Rogers has been making knives since 1996. My latest designs and direction have been into gentlemen’s tacticals.
    Richard wanted something that was a little bit bigger than the Vectorthus, we have The Axiom!
    The handles are Grooved Carbon Fiber Handles, blade material is CTS-XHP, and the Ti screws, pivot, liners and clip have been anodized blue. Inside on the liners is the newly marked serial number. And the R logo is on the flipper tab. This knife was introduced into the lineup in June of 2015. The "Rogers" name and Log is on the inside of the Blasted Titanium Liners. This is Brand New directly from the Blade 2017 from the Saturday lottery! This has a ultra smooth flipping action with a centered blade and early lockup. This will come with the knife cloth and Certification of Authenticity card. Here is your chance to own a beautiful piece of History! This is Brand New: never used, carried or sharpened.

    $1850
     
  6. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Custom Shop RMD Infidu .17" Saber Ground Doublecut INFI Blade, Textured Red Tequila G10 Handle
    Ratmandu - RMD
    5.25" Blade Length 10.3" Overall Length .17" Blade Thickness 10.0 Ounces
    Saber Ground Doublecut (Bead Blasted) Blade w/V-Ground Edge
    Textured Red Tequila G10 Handle
    INFI Blade Steel with Full Size Choil
    This is Brand New directly from the Fall Knob Creek 2015 Knife Show in KY. This is a one of a kind as they have not ever used this G10 color on this model before. The Infidu is no longer available for sale through the Swamp Rat Knife Comany because it's Sold Out, and has been Discontinued!

    The Swamp Rat Knife Company decided to do something special for the Fall Knob Creek 2015 Knife Show in KY so they made a few of these INFI Ratmandu in Never been done G10 Handles, put a V-Ground Edge on the Doublecut Finished Blade Finish. They only made one in each color so get it before it's gone. This was a very few of these made by hand by the Custom Shop and I purchased this knife directly from the Swamp Rat Knife Company at the Fall Knob Creek 2015 Knife Show in KY. This has a INFI Steel that is .17" thick with a Doublecut (Bead-Blasted) Finish! The V-Grind Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives and was never available for this model Swamp Rat Ratmandu before.
    $390
     
    Last edited: Jul 13, 2017
  7. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Scrap Yard Knife Company 511 .195" Saber Ground Midnight Blue Blade, Black Rec-C Handle
    Blade Length: 5.5"
    Blade Width: 1.3"
    Overall Length: Approx 9.95"
    Blade Thickness: .195”
    Grind: Midnight Blue coated Flat Saber Ground with V-Ground Edge
    Weight: 6.6 Ounces
    Steel: SR101 58-60Rc
    Handle: Black Rec-C Handle

    This is brand New from the Blade 2017 Show! This has the new Midnight Blue coated blade! The last and only time this coating was used before is there were a few knives from the 2016 Blade Show, so this color may be an exclusive for this model in this color. This has the Black Rec-C Handle which is softer and great non slip grip that absorbs a lot of the impact if you are chopping or using it for hard hitting impacts. This uses the SR101 which is well known to be used in SYKCO. This is Brand New, never used, carried or sharpened.
    $180
     
  8. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Active Duty .177" High Saber Ground Satin Blade, Hand Smoothed Jungle Storm G10 G-rexed Straight Grain Oak Wood Handle w/German Nickle Silver Tubes
    Active Duty - AD
    3.5" Blade Length 7.8" Overall Length 1.05" Blade Width .177" Blade Thickness 6.7 Ounces
    High Saber Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Hand Smoothed Jungle Storm G10 G-rexed Straight Grain Oak Wood Handle w/German Nickle Silver Tubes filled with Orange Resin
    INFI Blade Steel, Small Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The Active Duty have long since been discontinued and have been Sold out so get this now while you can!

    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. The Busse Custom Shop did a wonderful job making this High Saber Ground Hand Finished Satin Blade with a fine V-Ground Edge. This one is a Full Blown Custom was made by the Busse Custom Shop just for the 2017 Blade Show! This started with a .177" thick High Saber Ground Hand Finished Satin Blade and Finished it off with a Fine V-Ground Edge which is Razor Sharp! The Busse Custom Shop really outdid themselves with the Custom Hand Smoothed Jungle Storm G10 G-rexed Straight Grain Oak Wood Handle finished off with German Nickle Silver Tubes filled with Orange Resin. It's the little things if you look closely at this knife that will impress you, like they filled in the German Nickle Silver Tubes with clear Orange resin so you can see light go through it. You will never see another even close to this and can see a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! This is Brand New, never used, carried or sharpened.

    $600
     
  9. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Mini MUK .16" Saber Ground Satin Blade, Hand Smooth Tan Canvas Micarta G-rexed Buckeye Handle w/Yellow Liners & German Nickle Silver Tubes
    MM - Mini Muk
    3.5" Blade Length 8.2" Overall Length 1.5" Blade Width .16" Blade Thickness 7.6 Ounces
    Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smooth Tan Canvas Micarta G-rexed Buckeye Handle w/Yellow Liners & German Nickle Silver Tubes filled with Neon Yellow Resin
    INFI Blade Steel, Swedge
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The Mini MUK has been discontinued by Busse Combat and now now long available and can no longer be ordered so get this before it's gone!
    The Mini MUK was introduced by Jerry Busse in 2016 and has since been discontinued. This is one of the models available in the "Operation Two Weeks!" The Mini MUK is a bit smaller than the older Hog MUK which was a great and popular proven design. This one is a Full Blown Custom was made by the Busse Custom Shop just for the 2017 Blade Show! This started with a .16" thick Saber Ground Hand Finished Satin Blade and Finished it off with a V-Ground Edge which is Razor Sharp! The Busse Custom Shop really outdid themselves with the Custom Hand Smooth Tan Canvas Micarta G-rexed Buckeye Handle finished off with Yellow Liners & German Nickle Silver Tubes filled with Neon Yellow Resin. It's the little things if you look closely at this knife that will impress you, like they filled in the German Nickle Silver Tubes with Neon Yellow which really makes the handle stand out. You will never see another even close to this beauty. You can tell a lot of thought, planning and work went into making this a Truly "One of a Kind" knife! This is Brand New, never used, carried or sharpened.
    $600
     
  10. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Mini Vex .158" Saber Ground Forest Green Blade, Textured Olive Drab Green G10 Handle
    Mini Vex - MV
    3.5" Blade Length 7.7" Overall Length 1.2" Blade Width .158" Blade Thickness 6.1 Ounces
    Flat Saber Ground Forest Green Blade w/V-Ground Edge
    Textured Olive Drab Green G10 Handle
    SR101 Blade Steel with Full Size Choil
    This is Brand New directly from the 2017 Blade Show in Atlanta GA. The Mini Vex is no longer available for sale through the Swamp Rat Knife Company because it's Sold Out, and has been Discontinued!
    The Swamp Rat Knife Company decided to do something special for the 2017 Blade Show in in Atlanta GA so they made a few of these Mini Vex in a in the new Forest Green Coating just for the show. They only made a few in each color so get it before it's gone. There were only a few of these made by hand by the Custom Shop and I purchased this knife directly from the Swamp Rat Knife Company at that Show. This has a SR101 Steel that is .158" thick with a Flat Saber Ground Forest Green Blade w/V-Ground Edge which is Razor Sharp! This is the very first time they used the Forest Green blade. The color is beautiful and I think it should be called Emerald Green instead. This color blade goes very well with the Textured Olive Drab Green G10 Handle. This is a great little knife with a small handle that fits in the palm of your hand, great for things like skinning. This is Brand New, never used, carried or sharpened.

    $225
     
  11. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Urban Grudge .22" Flat Saber Ground Satin Blade, Magnum Textured Green/Black G10 G-rexed Tan G10/Green Canvas Micarta Handle
    Urban Grudge - UG
    5.8" Blade Length 10.75" Overall Length 1.25" Blade Width .22" Blade Thickness 11.5 Ounces
    Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Magnum Textured Green/Black G10 G-rexed Tan G10/Green Canvas Micarta Handle
    INFI Blade Steel at 58-60Rc with Choil and Swedge
    This is Brand New directly from the 2017 Show Show in Atlanta GA. This is a one of a kind as they have not ever used this handle on this model knife before. The Urban Grudge is no longer available for sale through Busse Combat because it's Sold Out, and has been Discontinued!

    Jerry Busse introduced the Urban Grudge Limited Edition in March of 2010 in a online Ganza and has been discontinued. When the Urban Grudge was offered, it was only available with a Doublecut (bead-blasted) Blade finish with Black Canvas Micarta. This knife comes from the original HG55 design but they took off CBT (Corrugated Bevel Technology) and shortened and reshaped the handle to make it shorter and fit the handle better. And since the HG55 was a fighter knife, so is this one! This one is the New version using the blanks from the Limited Edition version with the Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge introduced by Garth Reckner in 2016 . The swedge on the top part of this knife is 5" long but is NOT sharpened. This particular one was custom made by the Busse Custom Shop just for the 2017 Show Show. They wanted to make something different but yet 100% usable so they made this Custom Magnum Textured Green/Black G10 G-rexed Tan G10/Green Canvas Micarta Handle. You can tell by looking at this knife that a lot of thought, time and work went into this knife! This was purchased directly from Busse Combat by myself. This is Brand New, never used, carried or sharpened.

    $630
     
  12. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat Rodent 9 .265" Saber Ground Midnight Blue Blade, Textured Magnum Black Canvas Micarta Handle
    R9 - Rodent 9
    9.35" Blade Length 15.3" Overall Length 1.65" Blade Width .265" Blade Thickness 6.1 Ounces
    Flat Saber Ground Midnight Blue Blade w/V-Ground Edge
    Textured Magnum Black Canvas Micarta Handle
    SR101 Blade Steel with Full Size Choil
    This is Brand New directly from the 2017 Blade Show in Atlanta GA. The Rodent 9 in Midnight Blue is no longer available for sale through the Swamp Rat Knife Company because it was an exclusive for ONLY the 2017 Blade Show!
    The Swamp Rat Knife Company decided to do something special for the 2017 Blade Show in in Atlanta GA so they made a few of these Rodent 9 in a in the new Midnight Blue Coating just for the show. They only made a few in each color so get it before it's gone. There were only a few of these made by hand by the Custom Shop and I purchased this knife directly from the Swamp Rat Knife Company at that Show. This has a SR101 Steel that is .265" thick with a Flat Saber Ground Midnight Blue Blade w/V-Ground Edge which is Razor Sharp! This is the very first time they used the Midnight Blue coating on this model. The color is beautiful that shows different colors at different angles. This color blade goes very well with the Textured Magnum Black Canvas Micarta Handle. This is a great larger Chopper with good length and weight. This is Brand New, never used, carried or sharpened.
    $330
     
  13. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Urban Grudge .22" Flat Saber Ground Satin Blade, Hand Smoothed/Shaped Tan G10/Green Canvas Micarta G-rexed Buckeye Wood Handle w/German Nickle Silver Tubes
    Urban Grudge - UG
    5.8" Blade Length 10.75" Overall Length 1.25" Blade Width .22" Blade Thickness 11.1 Ounces
    Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge
    Custom Hand Smoothed/Shaped Tan G10/Green Canvas Micarta G-rexed Buckeye Wood Handle w/German Nickle Silver Tubes filled with Neon Yellow Resin
    INFI Blade Steel at 58-60Rc with Choil and Swedge
    This is Brand New directly from the 2017 Show Show in Atlanta GA. This is a one of a kind as they have not ever used this handle on this model knife before. The Urban Grudge is no longer available for sale through Busse Combat because it's Sold Out, and has been Discontinued!

    Jerry Busse introduced the Urban Grudge Limited Edition in March of 2010 in a online Ganza and has been discontinued. When the Urban Grudge was offered, it was only available with a Doublecut (bead-blasted) Blade finish with Black Canvas Micarta. This knife comes from the original HG55 design but they took off CBT (Corrugated Bevel Technology) and shortened and reshaped the handle to make it shorter and fit the handle better. And since the HG55 was a fighter knife, so is this one! This one is the New version using the blanks from the Limited Edition version with the Flat Saber Ground Hand Finished Satin Blade with V-Ground Edge introduced by Garth Reckner in 2016 . The swedge on the top part of this knife is 5" long but is NOT sharpened. This particular one was custom made by the Busse Custom Shop just for the 2017 Show Show. They went all out with this handle and made a custom Hand Smoothed/Shaped Tan G10/Green Canvas Micarta G-rexed Buckeye Wood Handle finished off with German Nickle Silver Tubes than filled in with Neon Yellow Resin. You can tell by looking at this knife that a lot of thought, time and work went into this knife! This handle is so incredible because it is not only Hand Smoothed but also Hand Shaped. This is Brand New, never used, carried or sharpened.

    $730
     
  14. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Swamp Rat RMD Ratmandu Desert Multicam Cerakote .184" Saber Ground Blade, Textured Handle
    Ratmandu - RMD
    5.25" Blade Length 10.35" Overall Length 1.35" Blade Width .184" Blade Thickness 10.2 Ounces
    Flat Saber Ground Multicam Cerakote coated Blade w/V-Ground Edge
    Textured Coated Handle (underneath the coating can be either Canvas Micarta or G10)
    SR101 Blade Steel with Full Size Choil
    This is Brand New directly from the 2017 Blade Show in Atlanta GA. The Ratmandu is no longer available for sale through the Swamp Rat Knife Company because it's Sold Out, and has been Discontinued!
    The Swamp Rat Knife Company decided to do something special for the 2017 Blade Show in in Atlanta GA so they made a few of these Ratmandu in a in the new Desert Multicam Cerakote! They only made a few in each color so get it before it's gone. There were only a few of these made by Swamp Rat Knife Works and I purchased this knife directly from the Swamp Rat Knife Company at that Show. This has a SR101 Steel that is .184" thick with a Flat Saber Ground Desert Multicam Cerakote Blade w/V-Ground Edge which is Razor Sharp! The actual handle material is unknown can be either canvas micarta or G10, and because it is coated, is not known but will still have the lifetime guarantee. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a great mid-sized knife with a smaller handle that fits in your hand, great for things everyday tasks or hiking. This is Brand New, never used, carried or sharpened.
    $265
     
  15. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat MOFO BG .24" Flat Ground Forest Green Blade w/CBTs, Magnum Textured Orange/Black G10 Handle
    MOFO BG - MoFo Battle Grade
    8.2" Blade Length 14.25" Overall Length 1.7" Blade Width .24" Blade Thickness 19.8 Ounces
    Forest Green Coated Flat Ground Blade with CBT (Corrugated Bevel Technology) with a V-Ground Edge
    Magnum Textured Olive Green G10 Handle
    This uses the SR-101 Blade Steel with a 58-60Rc. with Choil & CBTs
    This Model was part of "Operation 2 Weeks" and available for sale starting February 4, 2016 through February 8, 2016 and has been discontinued so can no longer be order from the Busse Company Website! This knife is Brand New purchased directly from Busse Combat at the 2017 Blade Show in Atlanta Ga.
    The BG FSH - Battle Grade Fusion Steel Heart was introduced by Jerry Busse on 2/3/17 with this:
    The Busse Combat Mofo is back with a vengeance and it proudly makes its debut in full Battle Grade dress!!! The SR-101 gently recurved blade features vastly improved handle ergonomics and is the first Battle Grade to sport our patented “Corrugated Bevel Technology” CBT.
    These went Live on February 4, 2016 and didn't last long and sold out! This knife is a much older model that was brought back and made in the SR101 Battle Grade version to allow a much lower price for those that wanted to purchase this to use without paying collectors prices. There was a very limited supply. As part of "Operation 2 Weeks" it wasn't around for long and is now discontinued! This Forest Green was the first time Busse Combat has ever used the blade coating and was an exclusive for the 2017 Blade Show. This Forest Green is really beautiful in hand and is a toss up between this and Midnight Blue for my favorite color coating. This Green matches and pairs great with the Magnum Textured Orange/Black G10 Handle. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for two weeks or at the 2017 Blade Show before being discontinued. This is Brand New, never used, carried or sharpened.
    $620
     
  16. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Hinderer Spearpoint Battlefield Pick Up XM-24 Flipper w/Weathered Camouflage Blade, Weathered Anodized Titanium Handle w/Olive Drab Green G10 Scale
    4" Blade Length 9.15" Overall Length 1.2" Blade Width .185" Blade Thickness 7.5 Ounces
    Production Saber Ground Weathered Camouflage Blade with V-Ground Edge
    Weathered Battlefield Pick Up Finished Anodized 6AL4V Titanium Handle, Liner, Filler Tab, Pivot Screw, Backspacers, Lockbar Stabilizer, Handle Nuts & Screws, and Pocket Clip
    Textured Olive Drab Green G10 Scale
    S35VN Blade Steel etched on Lock Side of the blade
    Battlefield Pick Up Finished 6AL4V Titanium Lock Side, Backspacers, Filler Tab, Pocket Clip, Pivot Screw, & Full Titanium Display Side Handle Scale
    4th Generation with with the stop pin next to the pivot.
    Rick Hinderer Horse Logo marked on blade.

    This is a Production Rick Hinderer Spearpoint XM24 in a Spearpoint in a rare Battlefield Pick Up Finish with an OD Green Scale. Hinderer really went all out to make this killer variation of the XM-24! Each one has been hand "weathered" and been given a beaten up, "been there, done that" vibe. Each comes loaded up with titanium upgraded parts, and are unique. Each will very from the next as they are all finished by hand. This one has a hand weathered patina-like finish. The flipper tab has special American flag engraving on one side designating it a Battlefield Pickup. Titanium frame has been given the "Battlefield Pickup" treatment. The multi color anodized titanium has been weathered, showing marks and scratches and pits, just like if the thing had come through a war zone! Full titanium hardware has been anodized and hand distressed, including the pivot screw, handle nuts, stand offs, and scale screws. Textured Olive Drab Green Scale is made from G10. This has a Smooth opening action, Solid lockup with a centered blade. This has a nice strong detent so the blade with fly out when the blade is engaged. This is Brand New and from a private collection which was a safe queen.Here is your chance to own a beautiful piece of History!

    $800
     
    Last edited: Aug 24, 2017
  17. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Mean Street Ergo .158" Saber Ground Satin Blade, Full Brick Stacked Mammoth Tooth Handle w/Solid Brass Bolts & Grey Liners
    MSE - Mean Street Ergo
    3.75" Blade Length 8.5" Overall Length 1.05" Blade Width .1.58" Blade Thickness 6.2 Ounces
    High Flat Saber Ground Hand Finished Satin Blade with a V-Ground Edge
    Custom Hand Smoothed Full Brick Stacked Mammoth Tooth Handle w/Solid Brass Bolts & Grey Liners
    INFI Blade Steel with Small Choil
    This knife is Brand New purchased directly from Busse Combat at the 2017 Blade Show in Atlanta Ga. The Mean Street Ergo is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued! This Mean Street Ergo Limited Edition and Battle Grade was part of "Operation 2 Weeks" and available for sale starting January 6, 2016 through January 11, 2016 and has been discontinued so can no longer be order from the Busse Company Website!
    The Mean Street Ergo was introduced by Jerry Busse on January 6, 2017 with this:

    There has never been a Mean Street Ergo before and this first generation promises to bring some very cool features to the game!
    The high flat saber grind on the thin, and yet extra wide blade, allows for added strength and excellent bevel geometry. The gentle drop in the handle design provides the owner with a more comfortable carry in a high ride position and allows for a more naturally centered point in either standard or reverse grip.

    These went Live on January 6, 2017 and didn't last long and sold out! This knife is a much older model that was brought back and made in the Limited Edition Satin INFI and the Battle Grade SR101 Battle Grade version which allow a much lower price for those that wanted to purchase this to use without paying collectors prices. There was a very limited supply. As part of "Operation 2 Weeks" it wasn't around for long and is now discontinued! This is a Full Blown Custom made by the Busse Custom Shop just for the 2017 Blade Show. This has a High Flat Saber Ground Hand Finished Satin Blade with a V-Ground Edge that is Razor Sharp. They went all out with this handle and made a Custom Hand Smoothed Full Brick Stacked Mammoth Tooth Handle finished off with Solid Brass Pins & Grey Liners. You can tell by looking at this knife that a lot of thought, time and work went into this knife! This handle is so incredible because it fits the hand so well. There were not many custom so f this model made for the show or of these made for operation two weeks before being discontinued. This is Brand New, never used, carried or sharpened.

    $800
     
  18. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat FAT Battle Grade Fusion Steel Heart .325" Saber Ground Midnight Blue Blade, Magnum Textured Black/Tan G10 Handle
    BG FSH - Battle Grade Fusion Steel Heart
    8.2" Blade Length 14.3" Overall Length 1.95" Blade Width .325" Blade Thickness 30 Ounces
    Midnight Blue Coated Flat Saber Ground Blade with V-Ground Edge
    Magnum Textured Black/Tan G10 Handle
    This uses the SR-101 Blade Steel with a 58-60Rc. with a Large Choil
    This is Brand New directly from the 2017 Show Show in Atlanta GA. This is special as it uses the Midnight Blue coating that was not an option when this was availble for orders and was done as an exclusive for the 2017 Blade show. This Model was available for "Operation Two Weeks" starting February 24, 2016 through February 28, 2016 and has been discontinued so can no longer be order from the Busse Company Website!

    The BG FSH - Battle Grade Fusion Steel Heart was introduced by Jerry Busse on 2/23/17 but it wasn't until the next day that Garth Reckner released all the specs and info. There were two version of this knife made, there was the thicker version that is 5/16" thick, and an thinner version that is 3/16" and they were at separate prices. Both use a coated SR101 Blade Steel with a Magnum Textured Handle. These went Live on February 28, 2016 and didn't last long and sold out fast! This knife is a much older model that was brought back and made in the SR101 Battle Grade version to allow a much lower price for those that wanted to purchase this to use without paying collectors prices. If this was made of INFI, because of this fat Blade, it would be the HOGFSH - Heavy Ordinance Grade Fusion Steel Heart which was released in 2004. So this knife for sale in this listing is the very first time they used the Midnight Blue coating on this model and it was an exclusive for the 2017 Blade Show. The color is beautiful that shows different colors at different angles as you can seen from the pictures. This color blade goes very well with the Magnum Textured Black/Tan G10 Handle. This one that is listed is the thicker version and has the Midnight Blue coating and the Magnum Textured Black/Tan G10 Handle. There was a very limited supply of these Fatter version of the Battle Grade Fusion Steel Heart. As part of "Operation 2 Weeks" it wasn't around for long and is now discontinued! This is Brand New, never used, carried or sharpened.

    $550
     
  19. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat 2nd Gen Steel Heart Ergo .255" Saber Ground Black Crinkle Blade, Textured Magnum Yellow/Black G10 Handle
    2nd Gen SHE - Second Generation Steel Heart Ergo
    7.5" Blade Length 13.45" Overall Length 1.7" Blade Width .255" Blade Thickness 21.22 Ounces
    Flat Saber Ground Black Crinkle Blade with a V-Ground Edge
    Textured Magnum Yellow/Black G10 Handle
    INFI Blade Steel, Full Size Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The Second Generation Steel Heart Ergo is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!
    The Steel Heart E - SHE was introduced by Jerry Busse in 2001 and has since been discontinued. Many didn't think it looked well but those that have handled it know the ergo handle felt great in the hand and the INFI steel would handle anything you can put it through. After about 15 years, Jerry changed the design to make this better and keep everything else that worked before and this the Second Generation Steel Heart Ergo was introduced by Jerry Busse in December of 2015 and has since been discontinued. It was part of "Operation Two Weeks" and was available for pre-order at that time. The catch was this was only available in Combat Grade meaning INFI steel but with a coating. So there were no Satin Finish available yet. This has a Flat Saber Ground Black Crinkle Blade with a very sharp V-Ground Edge which is Razor Sharp! The Busse Custom Shop did something different with the handles and went with a non standard optional color for this show and did a Textured Magnum Yellow/Black G10 Handle. For those that do know, Yellow and Black are the Busse colors. This is Brand New, never used, carried or sharpened.

    $550
     
  20. Liu Kang

    Liu Kang Grail Dealer Knife Maker or Craftsman

    4,287
    83
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat 2nd Gen Badger Attack Ergo .23" Saber Ground Midnight Blue Blade, Textured Magnum Yellow/Black G10 Handle
    2nd Gen SHE - Second Generation Steel Heart Ergo
    4.8" Blade Length 10.2" Overall Length 1.55" Blade Width .23" Blade Thickness 14 Ounces
    Flat Saber Ground Midnight Blue Blade with a V-Ground Edge
    Textured Magnum Yellow/Black G10 Handle
    INFI Blade Steel, Small Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. This is special as it uses the Midnight Blue coating that was not an option when this was available for orders and was done as an exclusive for the 2017 Blade show. This Model was available for "Operation Two Weeks" starting December 23, 2015 through December 28, 2015 and has been discontinued so can no longer be order from the Busse Company Website!
    The Steel Heart E - SHE was introduced by Jerry Busse in 2001 and has since been discontinued. Many didn't think it looked well but those that have handled it know the ergo handle felt great in the hand and the INFI steel would handle anything you can put it through.
    In 2015 Jerry Busse introduced the 2nd Gen Badger Attack Ergo saying this:

    The Second Generation Badger Attack E is a complete redesign. Whereas the original BAE had the same handles, choil and blade width as the Steel Heart E, this entire platform has been downsized, making it a perfect dayhiker and EDC for places where 5" is the maximum blade length. The blade is robust enough to handle anything you can throw at it while maintaining excellent blade geometry for cutting and slicing.

    It was part of "Operation Two Weeks" and was available for pre-order at that time. The catch was this was only available in Combat Grade meaning INFI steel but with a coating. But for the 2017 Blade Show, Busse Combat must have had some of these blanks left over and did something special and coated these with the Midnight Blue coating and Yellow/Black G10. Neither of these were options that you could choose when these were available for order. There were also not many of these made in these colors so these are super rare. This has a Flat Saber Ground Midnight Blue Blade with a very sharp V-Ground Edge which is Razor Sharp! The Busse Custom Shop did something different with the handles and went with a non standard optional color for this show and did a Textured Magnum Yellow/Black G10 Handle. For those that do not know, Yellow and Black are the Busse colors. This is the very first time they used the Midnight Blue coating on this model. The color is beautiful that shows different colors at different angles. This color blade goes very well with the Textured Magnum Yellow/Black G10. This is Brand New, never used, carried or sharpened.

    $420
     
    Last edited: Jun 24, 2017

Share This Page