1. **ATTENTION ALL DEVILS** If you are still having trouble logging in (Resetting your password should do "the trick") OR if you are not technically capable of doing this; use the "Contact Us" form utilizing your current, valid email address. If your email address is 'lost' to you, simply providing some account details will get us on the correct path together. THERE IS NO NEED TO CREATE SECONDARY ACCOUNTS, STOP BEING SO LAZY! YOU WILL BE BANNED! (Yelling/impolite voice implied there for *maximum effect*)
    Dismiss Notice

Sold, 11th Thread

Liu Kang Oct 7, 2017

  1. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Anniversary Uncle MoJo Variant .25" Satin Blade w/Fuller, Full Brown/Tan Lacewood Handle with Blue Liners & Mosaic Pins
    Anniversary MoJo - AM
    8.15" Blade Length 13.8" Overall Length .25" Blade Thickness 17.895 Ounces
    Flat Saber Ground Hand Finished Satin Blade w/Blended Convexed Edge
    Custom Contoured Hand-Shaped Full Brown/Tan Lacewood Handle with Blue Liners & Mosaic Pins
    INFI Blade Steel, Full Size Choil, Finger Grooves with Fuller & Swedge
    This one is Brand New from the Spring Knob Creek 2015 Show! These Busse Custom Shop Anniversary Uncle MoJo have been discontinued and will only go up in prices so get this while you can.

    This is a true Custom and very RARE knife made by the Busse Custom Shop! I believe there were only 5 of these made in Satin and was Exclusive to just the Spring Knob Creek 2015 Show! In 2001 Jerry Busse introduced the "Mr MoJo" in 2001. They had a hook on the front of the top of the handle which was a blade catcher. Back in 2001 about the same time, he also introduced the Uncle MoJo which was the same knife but without the blade catcher. Well I guess this would make this the "Anniversary Uncle MoJo" because these also don't have the blade catcher or the hook. There is also a fuller or blood groove added on and steel was trimmed off which also makes it a tad shorter but that also should make this knife lighter thus faster! Each of these are hand made custom handle with Finger Grooves! This one has a custom hand made Contoured Hand-Shaped Full Brown/Tan Lacewood Handle with Blue Liners & Mosaic Pins. You can tell there was a lot of thought, planning and work put into this beautiful knife! This is Brand New: Dead Mint never used, carried or sharpened. This knife was purchased directly by me from Busse Combat and than spent it's life in a safe. This is made of the infamous INFI Steel which is a proprietary Steel is used ONLY by Busse Combat! This knife will be backed 100% with Lifetime Warranty from Busse Combat!
    Sold
     
  2. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat HG55 .26" Hammered Silver Blade w/CBT's, Textured Black G10 Handle
    HG55 - Busse Old School Series (BOSS)
    5.6" Blade Length 10.6" Length Overall .26" Black Thickness 1.15" Blade Width 12 Ounces
    Hammered Silver coated Saber Flat Ground Blade with CBT's (Corrugated Bevel Technology) with V-Ground Edge
    Textured Black G10 Handle
    INFI Blade Steel, Full Size Choil, Swedge & CBT's (Corrugated Bevel Technology)
    This knife is Brand New purchased directly from Busse Combat at the 2017 Blade Show in Atlanta Ga. The HG55 is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!

    The Busse Combat HG55 was introduced in January of 2009 by Jerry Busse. This is an older model but Busse Combat had a blank or two left over and brought them to the show. This one has the Hammered Silver coating which is pretty new and was never available when the HG55 was released so here is your chance to get a super rare knife. The coating goes very well with the Textured Black G10 Handle. This is Brand New purchased by me directly from Busse Combat straight from the show. This is Brand New, never used, carried or sharpened. INFI is a proprietary Steel is used by Busse Combat knives. This knife will carry a lifetime warranty from Busse Combat! Here is your chance to own a beautiful piece of History!
    Sold
     
  3. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Gladius CG .305" Convexed Sage Crinkle Blade, Hand-Smoothed Green/Black G10 Handle
    Gladius CG - Gladius Combat Grade
    15" Blade Length 23.20" Overall Length 1.7" Blade Width .305" Blade Thickness 39.4 Ounces
    Convexed Sage Crinkle Coated Blade with a V-Ground Edge & Fuller (Blood Groove)
    Hand-Smoothed Green/Black G10 Handle
    INFI Blade Steel, Fuller (Blood Groove)
    This is Brand New from a private collection where it was kept as a safe queen! The Gladius is no longer available for sale through the Busse Combat because it has been Sold Out, and has been Discontinued!
    The Busse Gladius model was introduced by Jerry Busse in the summer of 2010 and has long since been discontinued! The blade is Convexed with a Double Edged V-grind is Razor Sharp! This has a very Beefy tip and a Full or otherwise known as a Blood Groove down the middle of the blade. This has a Hand-Smoothed Green/Black G10 Handle which is very strong and will survive the abuse that anyone can throw at this short sword. This is Brand New, never used, carried or sharpened.
    Sold
     
  4. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CSAK472 usse Combat Custom Shop AK47 .18" Convexed Satin Blade, Blue/Black G10 G-rexed Natural Sponge Bolstered Maple Handle w/Mosaic Pins
    American Kenzi 47 - AK47
    18.45" Blade Length 29.05" Overall Length 1.3" Blade Width .18" Blade Thickness 28.2 Ounces
    Full Height Convexed Satin Blade with V-Ground Edge
    Custom Hand Smooth Blue/Black G10 G-rexed Natural Sponge Bolstered Maple Handle w/Mosaic Pins
    INFI Blade Steel with Choil
    This is Brand New purchased directly from Busse Combat. The Busse AK47 has long been discontinued and is no longer being made so get this while you can!
    The Busse Combat AK47 was first introduced by Jerry Busse in 2005 and back than it was with a coated blade. There were very few made with this Convexed Satin Blade for the shows and Ganza that Busse did. But these Busse AK47 have been discontinued and really sought after but the collectors especially the satin blades. These are nice short swords with a nice thin blade for slicing with a full handle that can be handled with both hands for an average person. As you can see, this one is highly modified and has a hand satin finished Blade. The Busse Custom Shop went all out on this custom handle. You can see a lot of thought and work went into this one! This one has a Custom Hand Smooth Blue/Black G10 G-rexed Natural Sponge Bolstered Maple Handle finished off with Mosaic Pins. This is a one of a kind and you will never see another one like this again. This one is Brand New, never used, carried or sharpened.
    Sold
     
  5. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    CS299 Busse Combat Custom Shop Gladius .29" Convexed Satin Blade, Hand Smoothed Red/Black G10 G-rexed Buckeye Wood Handle w/Red Liners & Mosaic Pins
    Gladius
    15.15" Blade Length 23.20" Overall Length 1.75" Blade Width .29" Blade Thickness 2 Pounds 9.6 Ounces
    Double Edged Convexed Hand Finished Satin Blade with Zero Edge with a Doublecut Fuller
    Custom Hand Smoothed Red/Black G10 G-rexed Buckeye Wood Handle w/Red Liners & Mosaic Pins
    INFI Blade Steel, Fuller (Blood Groove), Nuclear Meltdown Treatment on the Spine and Edges (rounded edges)
    This is Brand New directly from Busse Combat Custom Shop. These "Gladius" sword models are discontinued and have been Sold out since 2010!

    This was introduced by Jerry Busse in the summer of 2010 and has long since been discontinued! This was a very Limited Production Run Busse by the Combat Custom Shop that you could pre-order them at the 2010 Blade Show and than a online Ganza that followed but that was it. This is not your standard Satin Gladius, this one was made special by the Busse Custom Shop and that's rare because there have not been many ever made. This has a Double Edged Convexed Satin Blade with Zero Edge is Razor Sharp all hand finished to a satin Blade with a Doublecut Fuller down the middle! This one has been made with a Custom Hand Smoothed Red/Black G10 G-rexed Buckeye Wood Handle Finished off with Red Liners & Mosaic Pins. These beautiful sword is a MUST have for any Busse collector and lots of times is their ultimate "Holy Grail!" I purchased this directly from Busse Combat! This has a INFI Steel that is .29" thick with a Beautiful Hand Satin Finish! This still has the original Full Height Convexed edge that is razor sharp! This one is brand new, never used, carried or sharpened.

    Sold
     
  6. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Emerson Custom Mini Gypsy Jack
    3.75" Blade Length
    8.75" Overall Length
    Liners Titanium
    Bolsters Titanium
    Blade Materials .125" 154 CM @ RC 57-59"
    Handle Materials Green Micarta Scales
    SPECWAR Logo - get this while you can, this still has the original logo and he has changed it to hand made.
    This is a Hand-ground satin finish blade with bead blast titanium bolsters, and green micarta scales. Stainless steel clip. Notched thumb-rest. Wave feature. Smooth action with a nice detent. Perfect lockup. Includes original box. Never used, carried or sharpened.
    Smooth Opening action with centered blade and early solid lockup.
    Sold
     
  7. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Custom Rick Hinderer Tanto XM24 Satin Flipper w/Textured Black G10 Scale & Blue Anodized Stonewashed Ti
    4" Blade Length 9.2" Overall Length 1.25" Blade Width .187" Blade Thickness 7.3 Ounces
    Custom Hand Hollow Ground Hand Finished Satin Tanto Blade with V-Ground Edge
    Blue Anodized Stonewashed Titanium Lock-Side Handle, Liner, Backspacer, Backspacer Screws, Stop Lock, Filler Tab & Pocket Clip
    Textured Black G10 Scale
    S35VN Blade Steel
    Rick Hinderer Logo etched on the blade.
    This is Brand New directly from the 2016 NYCKS in NJ.
    This is an Ultra Rare Custom hand ground knife by Rick Hinderer from the 2016 New York Custom Knife Show in NJ. For this show, he brought only 3 total customs, one Satin XM24 Hellfire, one coated XM24 Hellfire and this beautiful XM24 custom Tanto. At first glance this is very similar to the Hellfire but the primary edge is not curved. Than you would think this is a Harpoon Tanto but if you look at it again, it does not have a harpoon top front spine. I believe this may be the only one ever made in the XM18 or XM24! I believe this to be a "One of a Kind" full custom! This is the triple hollow ground blade that has made Rick Hinderer so famous. So if you have always wanted a Hellfire but didn't like the re-curve blade, this is your one and only chance at a One Off custom XM24! This has a Smooth opening action, Early Solid lockup with a centered blade. This has a nice strong detent so the blade with fly out when the blade is engaged. This is Brand New and kept as a safe queen. I would consider this in Dead Mint Condition but please look carefully at the pictures to judge for yourself! Included is the Hinderer box hand signed by Rick Hinderer from the show where he put the name and year of the show. This has the latest Rick Hinderer custom logo on the blade. Most Rick Hinderer knife collectors know this well and know it's a real "Grail knife!" Here is your chance to own a beautiful piece of History! This is Brand New: Never used, carried or sharpened.
    Sold
     
  8. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame Hardness Skull in Bronze Stainless EBO (1 of 12)
    Sold
     
  9. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Boom Parang Battle Grade .195" Saber Ground Hammered Silver Coated Blade, Textured Green Canvas Micarta Handle
    Boom Parang Battle Grade - BPBG
    11.25" Blade Length 16.65" Overall Length 1.8" Blade Width (Wides Point) .195" Blade Thickness 20 OuncesSaber Ground Hammered Silver Coated Blade with V-Ground Edge
    Magnum Textured Green Canvas Micarta Handle
    SR-101 Blade SteelThis knife was introduced were available for sale on 1/13/16 and were sold out before 1/17/16. The Boom Parang Battle Grade has been discontinued by Busse Combat and now now long available and can no longer be ordered so get this before it's gone!

    The Boom Parang Battle Grade was introduced by Jerry Busse on 1/13/16 and this is what he said about this knife:

    This super chopper is a throwback design of mine from the 1980s.
    The rounded butt of the Boom Parang facilitates an extreme forward grip which greatly increases leverage and chopping power. Running a piece of paracord from front to back secures this magnificent chopper to the hand under the heaviest impacts.
    The blade is robust enough to handle anything you can throw at it while maintaining excellent blade geometry for chopping, cutting and slicing. This Hammered Silver Coating is very rare and was not an option when ordering so here may be your only chance to get one with this color blade. I don't believe there were many of these coated models made. The V-Ground Edge is Razor Sharp! This was part of "Operation 2 Weeks!" Get this while you still can. This was purchased directly from Busse Combat by myself. There were not many of these made and was only available for two weeks and than discontinued. This is Brand New, never used, carried or sharpened.
    Sold
     
  10. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat SHBA .241" Flat Ground Smooth Black Blade, Hand Smooth Magnum Black Canvas Micarta Handles w/Slotted Bolts, Black Kydex Sheath
    SHBA - Straight Handle Badger Attack
    4.7" Blade Length 9.85" Overall Length 1.35" Blade Width .32" Blade Thickness 11.4 Ounces
    Flat Ground Smooth Black Coated Blade with a V-Ground Edge
    Smooth Hand Shaped Black Canvas Micarta Handles
    INFI Blade Steel, Smooth Black Coating, Small Choil, Doublecut Spine (above and Below Handle) 3 Slotted Bolts
    This is Brand New from a private collection. The Straight Handle Badger Attack are not being sold by Busse Combat any more and have been Sold out and discontinued!
    Well here is a Super Rare piece of Busse history with an original Straight Handle Badger Attack, this knife was introduced in the late 1990's and some were made in early 2000's. The early ones were made with A2 blade steel and the later ones were made of INFI Steel! The rule of thumb among Busse collectors is to look at the Ricasso and if it looks like it's smooth underneath, than it's probably A2, but if you see little dimples and bumps, it's probably the INFI Dimples and the steel is probably INFI. I had Busse Combat verify the steel on the knife and it is indeed INFI! This knife has the old school smooth black coating which can no longer be reproduced and has the V-Ground Edge! The Doublecut finished spine is only around handles, it is still black coated at the butt of the knife and on the spine of the actual blade! This will come with a Black Kydex Sheath which may be the factory sheath it came with at that time. This is pre-owned in excellent condition as you can see from the pictures and being sold as used, please look at the pictures carefully as this is what you are getting. You will never see another even close to this beauty.

    Sold
     
  11. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Long Two Handed Gladius .30" Convexed Satin Blade w/Fuller, Hand Smoothed Black G10 G-rexed Red/Tan Mammoth Tooth with Mammoth Ivory Bark Spacers and at the Butt of the Handle w/Solid Brass Pins
    24.2" Blade Length 33.2" Overall Length 1.8" Blade Width .285" Blade Thickness 3 Pounds 6.7 Ounces
    Double Edged Convexed Satin Finished Blade with a V-Ground Edge
    Custom Hand Smoothed Black G10 G-rexed Red/Tan Mammoth Tooth with Mammoth Ivory Bark Spacers and at the Butt of the Handle w/Solid Brass Pins
    INFI Blade Steel, Talon Hole
    This is Brand New direct from the Busse Custom Shop. The Gladius and Two Handed Gladius has been discontinued.

    This is a SUPER RARE Ultimate Grail from The Busse Combat Custom Shop! Since Busse Combat doesn't release the numbers made, but I would say there were many made! The Satin Gladius was introduced in June 2010 at the Blade Show and a very Limited Production Run Busse by the Combat Custom Shop because it is very labor intensive for the satin finish on this sword and Super Expensive. After receiving it, many people felt it would be much better if it was a longer two handed sword! But the problem was it would cost much more and most could not afford it. But I guess they finally did break down and made a few and was introduced as the first one was made at the Spring 2015 Knob Creek Show. This things is SWEET! The blade length on this is 24.15" which is longer than the overall length of a normal The Busse Custom Shop went all out and on this knife did a special Custom Hand Smoothed Black G10 G-rexed Red/Tan Mammoth Tooth with Mammoth Ivory Bark Spacers and at the Butt of the Handle finished off with Solid Brass Pins. Busse Gladius Sword! The also extended the length of the handle so you can get both hands around it for a more powerful controlled swing! The Fuller on this sword is in Doublecut (Bead Blasted.) Since the Busse Custom Shop has been closed, this has pretty much been discontinued! The Satin Gladius usually has a Double Edged Convexed Satin Blade but this one is Special and has a V-Ground Edge. I prefer the V-Ground Edge which is Razor Sharp! I purchased this directly from Busse Combat Custom Shop so pretty much not many have even got to hold it.! This has a INFI Steel that is .30" thick with a Beautiful Satin Finish! This has never been used, carried or sharpened! INFI is a proprietary Steel is used by Busse Combat knives and this model was never available for sale and probably NEVER AGAIN!
    Sold
     
  12. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    CS539 Busse Combat Custom Shop FAT ASH1 .325" Flat Ground Satin Blade, Full Blue Spalted Maple Handle w/Blue Liners & Mosaic Pins
    Anniversary Steel Heart 1
    6.25" Blade Length 11.8" Overall Length 1.75" Blade Width .325" Blade Thickness 20 Ounces
    Flat Ground Satin Blade with a Blended Convexed Edge
    Custom Hand Shaped Full Blue Spalted Maple Handle w/Blue Liners & Mosaic Pins
    INFI Blade Steel with Full Size Choil
    This is Brand New purchased directly from Busse Combat. The ASH1 has long been discontinued and is no longer being made so get this while you can!
    Jerry Busse introduced the Anniversary Steel Heart 1 in 2007 and this model has long been discontinued and one of everyone's favorite! Every true Busse collector should have at least one ASH1 in his/her collection. And it won't get any nicer than this one because of the beautiful Satin Blade. The Anniversary Steel Heart 1 in a Satin Finish with a .325" thick was NEVER a production model, the only ones that were made this thick were all coated and were known at "Combat Grade (CG)" This has a INFI Steel that is .325" Blade thickness! This has a special full custom Hand Shaped Full Blue Spalted Maple Handle finished with w/Blue Liners & Mosaic Pins. The Blended Convexed Edge is Razor Sharp! INFI is a proprietary Steel is used only by Busse Combat knives. This knife will carry a lifetime warranty from Busse Combat! This is Brand New: Never Used, Carried or Sharpened!

    Sold
     
  13. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame Pile of Skulls Warrior Pocket Clip in Bronze for the Torch/Flashlight
    This is one of the coolest accessories you can add to your Torch or Flashlight. So there are 5 Highly Detailed Warrior Skulls done in Bronze on a Stainless Steel mount on a pocket clip to dress up your Torch/Flashlight and is brought to you by Steel Flame. This is extremely because of the super low amount made and probably the most rare and sought after of all the Steel Flame EBO's. There were a few made just for the 2018 Blade Show in Atlanta Ga. Finished in our Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to dress up your ultimate compact flashlight.

    . Ultra Rare and near impossible to find on the secondary market. Only serious collectors would appreciate the rarity of this piece. As you can see, this has the Steel Flame etched logo/print on the back of the clip as you can see in the picture and include the black pouch so you know this is authentic. This is Brand New, never mounted or carried. I purchase this directly from Steel Flame at the 2018 Blade Show. This is Brand New and will come with the black pouch.
    Sold
     
  14. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Lucas Burnley Standard "Native" in .5" Hammered/Polished Copper Cypop
    2.3" Length 1.75" Wide .505" Thick 157 Grams
    Custom "One of a Kind" Cypop that is over half in inch thick
    This has a custom hand finished Hammered Flat surfaced with Hand Polished sides
    New in Original Box with Burnley Sticker, Authenticity Card w/specs, and lottery ticket.
    This is Brand New purchased directly from Lucas Burnley at the 2018 Blade show where it was won in the lottery.

    Here is the ultimate grail for a Burnley Brawler collector! This is the best one from the entire 2018 Blade show. There were only three custom Cypop available for lottery on Friday and Saturday. This one was won on Friday and the thickest one! If you are looking at this, you probably know what you are looking at. This is a Bottle Opener that is super high in demand. The reason for the demand is because of the quality and collectibility of Cypop from Lucas Burnley. This is Still Brand New as it was never used or carried and has only been stored in the box. Please text or call with any questions or concerns about this item. This set is in Dead Mint Condition!
    Sold
     
  15. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Busse Combat Custom Shop Game Warden .22" Deep Hollow Ground Satin Blade, Blue/Black G10 G-rexed Blue Stripped Maple Wood Handle w/Mosaic Pins
    Game Warden - GW
    3.05" Blade Length 7" Overall Length 1.05" Blade Width .22" Blade Thickness 7.2 Ounces
    Full Height Deep Hollow Ground Hand Finished Satin Blade with a Fine V-Ground Edge
    Custom Hand Smoothed Magnum Blue/Black G10 G-rexed Blue Stripped Maple Wood Handle w/Mosaic Pins
    INFI Blade Steel with Small Choil
    This is Brand New directly from the Busse Custom Shop. The GW- Game Warden models knives have long since been discontinued and have been Sold out so get this now while you can!
    The Game Warden was introduced by Jerry Busse in 2010 and has long been since discontinued. Over the years there have been a few different grinds and thickness of this model only because it's a great knife and everyone can't get enough of these as they fit in the hand so well. This one was a hand made custom made by the Busse Custom Shop! This one has a thick .22" Custom Hand Ground Full Height Deep Hollow Ground Hand Finished Satin Blade with a Fine V-Ground Edge that is Razor Sharp! The Busse Custom Shop went all out on the handles and went with a matched set of Custom Hand Smoothed Blue/Black G10 G-rexed Blue Stripped Maple Wood Handle finished off with Mosaic Pins. The Blue/Black G10 match the color of the Blue Stripped Maple Wood so well! Between the thick blade and the Magnum handle, this is very thick handle for the size of this knife! You can tell a lot of thought, planning and work went into making this custom "One of a Kind" knife! this feels great in the hand. Custom knives like this were never a production and only a few were ever made for the knife shows. This is Brand New, never used, carried or sharpened.

    Sold
     
  16. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat Custom Shop Long Two Handed Gladius .285" Convexed Satin Blade w/Fuller, Hand Smoothed Black G10 G-rexed Red/White Mammoth Tooth with Walrus Spacers and Black Bufflo Horn at the Butt of the Handle w/Mosaic Pins & Yellow Liners
    24.15" Blade Length 33.15" Overall Length 1.8" Blade Width .285" Blade Thickness 3 Pounds 5.1 Ounces
    Double Edged Convexed Satin Finished Blade with a V-Ground Edge
    Custom Hand Smoothed Black G10 G-rexed Red/White Mammoth Tooth with Walrus Spacers and Black Bufflo Horn at the Butt of the Handle w/Mosaic Pins & Yellow Liners
    INFI Blade Steel, Talon Hole
    This is Brand New direct from the Busse Custom Shop. The Gladius and Two Handed Gladius has been discontinued. I have a matching Satin Gladius if you want to get a set. Get this while you can.

    This is a SUPER RARE Ultimate Grail from The Busse Combat Custom Shop! Since Busse Combat doesn't release the numbers made, but I would say there are less than 12 ever made! The Satin Gladius was introduced in June 2010 at the Blade Show and a very Limited Production Run Busse by the Combat Custom Shop because it is very labor intensive for the satin finish on this sword and Super Expensive. After receiving it, many people felt it would be much better if it was a longer two handed sword! But the problem was it would cost much more and most could not afford it. But I guess they finally did break down and made a few and was introduced as the first one was made at the Spring 2015 Knob Creek Show. This things is SWEET! The blade length on this is 24.15" which is longer than the overall length of a normal The Busse Custom Shop went all out and on this knife did a special Custom Hand Smoothed Black G10 G-rexed Red/White Mammoth Tooth handle with Walrus Spacers and Black Bufflo Horn at the Butt of the Handle w/Mosaic Pins & Yellow Liners. Busse Gladius Sword! The also extended the length of the handle so you can get both hands around it for a more powerful controlled swing! The Fuller on this sword is in Doublecut (Bead Blasted.) Since the Busse Custom Shop has been closed, this has pretty much been discontinued! The Satin Gladius usually has a Double Edged Convexed Satin Blade but this one is Special and has a V-Ground Edge. I prefer the V-Ground Edge which is Razor Sharp! I purchased this directly from Busse Combat Custom Shop so pretty much not many have even got to hold it.! This has a INFI Steel that is .285" thick with a Beautiful Satin Finish! This has never been used, carried or sharpened! INFI is a proprietary Steel is used by Busse Combat knives and this model was never available for sale and probably NEVER AGAIN!
    Sold
     
  17. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame Hardness Skull in Bronze Stainless EBO

    This is the New Steel Flame Hardness Skull in Bronze on a Stainless EBO. This is the newest skull that just came out and although not labeled as for size, it is about the size of a XL. This is extremely because of the super low amount made. I believe there were three up for lottery on Facebook and than there were a few made just for the 2018 Blade Show in Atlanta Ga. Finished in our Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity.

    If you are looking at this, you probably know what you are looking at. This is a Bottle Opener/Dog Tab that is super high in demand. The reason for the demand is because of the quality and collectibility of everything Derrick/Leonard of Steel Flame . The EBO itself is marked "Honor, Gratitude, Respect" and "Steel Flame" on the back. This is a high quality and of the best details and craftsmanship. This is a pretty thick and heavy piece (43 grams) for an EBO and this may be the only chance you have of owning one of these prized pieces. This is Brand New as I purchase this directly from Steel Flame at the 2018 Blade Show in Atlanta Ga! Everything will come as it came from directly from Steel Flame which is a small air tight zip lock baggie and the black drawstring pouch. Everything in the pictures is included. Here is your chance to own a beautiful piece of History!
    Sold
     
  18. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Combat 2nd Gen Steel Heart Ergo .255" Saber Ground Forest Green Blade, Textured Magnum Black G10 Handle
    2nd Gen SHE - Second Generation Steel Heart Ergo
    7.5" Blade Length 13.45" Overall Length 1.7" Blade Width .255" Blade Thickness 22.1 Ounces
    Flat Saber Ground Green Blade Blade with a V-Ground Edge
    Textured Magnum Black G10 Handle
    INFI Blade Steel, Full Size Choil
    This is Brand New directly from 2017 Blade Show in Atlanta Ga. The Second Generation Steel Heart Ergo is no longer available for sale through the Busse Combat because it's Sold Out, and has been Discontinued!
    The Steel Heart E - SHE was introduced by Jerry Busse in 2001 and has since been discontinued. Many didn't think it looked well but those that have handled it know the ergo handle felt great in the hand and the INFI steel would handle anything you can put it through. After about 15 years, Jerry changed the design to make this better and keep everything else that worked before and this the Second Generation Steel Heart Ergo was introduced by Jerry Busse in December of 2015 and has since been discontinued. It was part of "Operation Two Weeks" and was available for pre-order at that time. The catch was this was only available in Combat Grade meaning INFI steel but with a coating. So there were no Satin Finish available yet. This has a Flat Saber Ground Forest Green Blade with a very sharp V-Ground Edge which is Razor Sharp! The Busse Custom Shop did something different with the blade coating as the Forest Green non standard optional color and new for the 2017 Blade Show. This has a Textured Magnum Black G10 Handle which goes perfectly with the blade color. This is Brand New, never used, carried or sharpened.
    Sold
     
  19. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Busse Custom Shop Tank Buster .25" Saber Ground Satin Blade, Orange G10 G-rexed Mammoth Tooth Matrix Handle
    Tank Buster - TB
    6.2" Blade Length 11.8" Overall Length 1.6" Blade Width .25" Blade Thickness 19.74 Ounces
    Saber Ground Hand Finished Satin Blade with a Blended Convexed Edge
    Custom Hand Shaped Orange G10 G-rexed Fossil Tooth Mammoth Handle
    The options on this knife is No Swedge, Choil, Plain Non-Serrated Blade and Skull Crusher.
    This was Purchased Brand New directly from Busse Combat at the 2015 Blade Show in Atlanta Ga. The Tank Buster Model is no longer available for sale from Busse Combat because it ha been discontinued
    The Tank Buster was introduced by Jerry Busse in 2009 and has long since been discontinued! This knife was purchased from me directly from Busse at the 2015 Blade Show in Atlanta Ga. This is a beautiful custom hand made by the Busse Custom Shop just for the show. This has a beautiful Satin Saber Ground Blade with Blended Convexed Edge. The Custom Hand Shaped Orange G10 G-rexed Mammoth Tooth Matrix Handle was not an option and was hand made by the Busse Custom Shop. This has a INFI Steel that is .25" thick with a Saber ground Satin Blade which is rare since most of the satin Tank buster were about .22" thick! The Saber Ground Blade with Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    Sold
     
  20. Liu Kang

    Liu Kang Dealer Knife Maker or Craftsman

    4,492
    88
    58
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Steel Flame Hardness Skull in Bronze Pocket Clip for Rick Hinderer Knives
    This is one of the coolest accessories you can add to your Rick Hinderer knives including the XM18 or XM24. So there is the new Hardness Skull about the size of an XL put on a Rick Hinderer pocket clip and should fit his knives or tools. Highly Detailed Skulls done in Bronze on a Stainless Steel mount on a pocket clip to dress up your knife/tool and is brought to you by Steel Flame. This is extremely because of the super low amount made and probably the most rare and sought after of all the Steel Flame pocket clip. There were a few made just for the 2018 Blade Show in Atlanta Ga. Finished in our Signature Heat treated Vintage Gunmetal™. Very limited in production and quantity. These are extremely hard to get a hold of. These are Handmade in the USA made by Steel Flame. This item is perfect to dress up your ultimate compact flashlight.

    Sold
     

Share This Page