Results 1 to 5 of 5

Thread: Busse Variants

  1. #1

    Busse Variants

    Asking price does not include shipping or insurance due to size, weight, destination, and amount insured for but feel free to email me for shipping quotes and include your complete mailing address at liukang187@yahoo.com with any questions or if you want specific pictures taken.
    You can contact me for payment info. I am willing to ship to different countries as long as you take the risk and pay additional for shipping. I am not responsible for international shipments even though I have never had any problems. Check my feedback.
    If you are thinking about offering me a trade, please get me a description of what you want to trade me, along with the condition it is in (new, used, carried, scratched, sharpened) and pictures to my email and I will let you know. I reserve the right to refuse sale to anyone without any explanation at all.













    Busse Custom Shop SOB .18" Saber Ground Satin Blade, Black G10 G-rexed Desert Ironwood Handle w/Mosaic Pins
    4.75" Blade Length 9.55" Overall Length .175" Blade Thickness 9.82 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom made for the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This has a hand made Black G10 G-rexed Desert Ironwood Handle which means it is bolstered/lined with Black G10 and the Desert Ironwood is than inlaid into the Black G10 so overall this handle is much thicker than your standard ones. I purchased this directly from Busse Combat! This has a INFI Steel that is .18" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $580













    Busse Custom Shop SOB .18" Saber Ground Satin Blade, Full Brown Walnut Handle with Yellow/Green Liners & Mosaic Pins
    4.75" Blade Length 9.55" Overall Length .18" Blade Thickness 8.51 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom made for the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .18" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $530













    Busse Custom Shop SOB .175" Saber Ground Satin Blade, Full Maple Wood Handle w/Mosaic Pins Red/Black Liners & Mosaic Pins
    4.75" Blade Length 9.55" Overall Length .175" Blade Thickness 8.69 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom made for the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .175" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $530









    CS403 Fat SJ TAC .32" Black Blade, Polished Spine, Snakewood Handle, (1 of 5) $810









    ASH1 Variant, .32" Satin Flat Ground Convexed Edge, G-rexed Yellow Mammoth Tooth
    6.4" Blade 11.75" Overall
    $1450






    CS420 Harpoon Fighter .22" Convexed Satin w/G-rexed Yellow Mammoth Tooth with Yellow Liners with Mosaic Pins
    6.75" Blade 2.5" Sharpened Top Swedge 12.75" Overall













    Pregnant Dodo Bird Assault .25" Black Blade, Orange/Black G10 (1 of 13)
    9.75" Blade 15.75" Overall .25" Thick
    $1000













    Pregnant Dodo Bird Assault .25" Black Blade, Tigerhide Micarta Handle (1 of 13)
    9.75" Blade 15.75" Overall .25" Thick
    $1000













    NJ75 Recurve Fighter .22" Full Convexed, G-rexed Giraffe Bone with Mosaic Pins
    7" Blade 12.75" Overall
    Here is a one of a kind custom fighter. This was made just for the East Coast Custom Knife Show in NJ on 3/4/2011.
    $1000














    Busse Custom Shop Fighter, Sharpened Harpoon Top, Black .22" Re-curve Blade, Textured Standard Black Paper Handles
    This is True "One of a Kind" from The Busse Custom Shop from Blade 2010
    6.75" Blade 3.6" Sharpened Top Swedge 12.6" Overall .22" Thick
    $860
    Last edited by Liu Kang; 06-01-2015 at 06:46 AM.

  2. #2













    Busse Custom Fighter .24" Tanker Grey Flat Ground Re-Curve Bowie Blade, Magnum Textured Black Canvas Micarta Handle
    6.75" Blade 12.7" Overall .24" Thick
    Here is a one of a kind custom fighter. This was made just for the Spring Knob Creek 2015 Show.
    I purchased this knife directly from Busse Combat at the Spring Knob Creek 2015 Show. This has a INFI Steel that is .24" thick Flat Ground with a V-Ground Edge on a Re-Curved Bowie Shaped Blade! The V-Ground Edge is Razor Sharp! This one is made by the Busse Custom Shop. This is a true Custom and very RARE! The handle is Magnum Textured Black Canvas Micarta Handle.
    $700










    CS356 ASH1 Bowie Variant .22" Satin Blade w/Sharpened Spine, G-rexed Green Mammoth Tooth
    This is from the Knob Creek Show on 4/7/2011 and I believe this was hand ground by Jerry Busse himself
    $1400









    CS381 Fighter .22" Convexed Satin, G-rexed Green Mammoth Tooth w/White Liners
    This is from the Knob Creek Show on 4/7/2011 and I believe this was hand ground by Jerry Busse himself
    $1400







    SAR8 Fighter Variant, .22" Satin Convexed Blade, Black Paper Handle
    8.6" Blade 14.3" Overall
    $800







    CS377 ASH1 Variant Recurve .23" Satin, G-rexed Greyn/White Giraffe Bone
    I believe Jerry Busse Hand Ground this himself =)
    $900


    OK, these are Extra Large Active Duty. These were avil at Blade 2011. These are a cross between a Meaner Street and a Active Duty. This have a 4" Full Convexed Satin Blade that is about .16" Thick. They were all made with a full Giraffe Bone Handle and as you can see, there were only 10 of these made. All of them are slightly different because of the natural pattern of the Giraffe Bone. The above pictures are for size comparison only. I have a few of these but these will go fast so get them fast!













    CS407 Busse Custom Shop Large AD 4" Blade.16" Convexed Satin, Full Giraffe Bone Handle, (1 of 10)
    4" Blade 8.4" Overall .16" Blade Thick 6.525 Ounces
    $460










    Custom Shop Public Defender .19" Satin Tanto Blade with a Sharpened Top Swedge with Ram's Horn Handle.
    4.5" Blade 9.3" Overall .17" Thick $950

  3. #3








    Busse Combat Custom Shop Elmax Steak Knife Black Digicam Cerakoted .09" Hollow Saber Ground Blade, Canvas Micarta Handle (1 of 5)
    4.75" Blade Length 9.35" Overall Length .09" Blade Thickness 3.93 Ounces
    .09" Hollow Saber Ground Aged Bronze Cerakoted Elmax Blade with a V-Ground Edge with Small Choil
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only 5 made so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore.
    The Elmax Steak Knife was introduced by Busse at the 2013 Blade Show and has long been since discontinued. This knife is one of the rare knives that Busse didn't use INFI Steel on, this one is made of Elmax Steel and is super thin and even Sharper! The Cerakote cover not only the blade but the Textured Canvas Micarta Handles and protects it. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. This is a Brand New knife but the coating is like that to make it looked aged. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, you never know! This knife will carry a lifetime warranty from Busse Combat! This one is new and a Super Rare find because they only made 5 in this color combination! Never Used, Carried or Sharpened!
    $360













    Busse Combat SOB .17" Saber Ground Black American Flag Cerakoted Magnum Canvas Micarta Handle (1 of 6)
    Son of Badger - SOB
    4.75" Blade Length 9.55" Overall Length .17" Blade Thickness 8.99 Ounces
    Saber Ground Tan American Flag Cerakoted INFI Blade w/V-Ground Edge
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only six made so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore!
    The Son of Badger in a American Flag Cerakoted across the knife with a Saber Ground .17" Blade thickness! The Cerakote coats not only the blade but the Magnum Canvas Micarta Handles and protects it. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! The Blade steel is INFI which is a proprietary Steel is used only by Busse Combat knives. This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find because they only made 6 in this color combination! Never Used, Carried or Sharpened!
    $450













    Busse Combat SOB .17" Saber Ground Tan American Flag Cerakoted Magnum Canvas Micarta Handle (1 of 4)
    Son of Badger - SOB
    4.75" Blade Length 9.55" Overall Length .17" Blade Thickness 8.99 Ounces
    Saber Ground Tan American Flag Cerakoted INFI Blade w/V-Ground Edge
    This was Brand New from the 2015 Blade Show in Atlanta Ga and I believe an Exclusive for ONLY this show! I believe there were only Four made so this one is super rare and will never be done again! I only have one so when this is sold, I can't get anymore!
    The Son of Badger in a American Flag Cerakoted across the knife with a Saber Ground .17" Blade thickness! The Cerakote coats not only the blade but the Magnum Canvas Micarta Handles and protects it. Cerakote is a High Performance coating that not only protects the blade but the coating is very tough and hard to wear out. There have been very intense testing and this coated was mainly used on guns because of the tough durability. This is the very first time Busse has offered this coating on their knives and may never do it again, so get this now cause you never know if Jerry will do it again! The Blade steel is INFI which is a proprietary Steel is used only by Busse Combat knives. This knife will carry a lifetime warranty from Busse Combat! This one is new and a RARE Super Find because they only made 4 in this color combination! Never Used, Carried or Sharpened!
    $450













    FAT SJTAC Variant .32" Satin Blade w/Full Sharpened Spine, Black G10 G-rexed Brown/Tan Lacewood Handle
    6.4" Blade Length 12" Overall Length .32" Thick
    5.5" Sharpened Top Spine
    .32" Satin Finish INFI Blade with Convexed Satin Blade
    This is from the Fall Knob Creek 2014 Show.
    $1100



    Elmax Steak Knife .09" Satin Hollow Saber Ground Blade, Curly Oak Handle
    4.85" Blade 9.5" Overall
    $410



    Elmax Steak Knife .09" Satin Hollow Saber Ground Blade, Blue Buckeye Burl Handle $410



    Elmax Steak Knife .09" Satin Hollow Saber Ground Blade, Stripe Maple Handle $410



    Elmax Steak Knife .09" Satin Hollow Saber Ground Blade, Orange Giraffe Bone $410



    Elmax Steak Knife .09" Satin Hollow Saber Ground Blade, White Giraffe Bone $410



    Elmax Steak Knife .09" Satin Hollow Saber Ground Blade, Off-White Giraffe Bone $410













    Busse Custom Shop Son Of Badger SOB .17" Saber Ground Satin Blade, Grey Giraffe Bone Handle Mosaic Pins & Red/Thick Curly Oak Liners
    4.65" Blade Length 9.6" Overall Length .17" Blade Thickness 10.115 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom Shop made for the Spring Knob Creek 2015 Show! This set of handles are one of the most extensive I have ever seen on a Busse Son of Badger. It starts with Red Liners next to the Blade, than about .20" Thick Stabilized Curly Oak than Grey Giraffe Bone all held together with Mosaic Pins! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $640













    Busse Custom Shop Son Of Badger SOB .17" Saber Ground Satin Blade, Black G10 G-rexed Mammoth Ivory Bark Handle w/Mosaic Pins
    SOB .17" Saber Ground Satin Blade, Grey Giraffe Bone Handle Mosaic Pins & Red/Thick Curly Oak Liners
    4.65" Blade Length 9.6" Overall Length .17" Blade Thickness 10.08 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This one is from the 2015 Blade Show in Atlanta Ga!
    This was made by Busse Custom Shop made for the 2015 Blade Show in Atlanta Ga! This set of handles are ones of the most exotic I have ever seen on a Son Of Badger. This is the only set of Mammoth Ivory Bark I have ever seen on a Busse Son of Badger. This Beautiful handle starts with a solid piece of Black G10 that is cut out for a matching choice Mammoth Ivory aged with natural green exterior bark. This makes it look like it's bolstered but at the same time the Black G10 acts like a liner so cushions the fossil so it is set in a much more stable handle! The Blended Convexed Edge on the INFI Steel is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $950

  4. #4













    Busse Custom Shop Son Of Badger SOB Harpoon Variant .18" Saber Ground Satin Blade, Textured Black G10 Handle
    4.75" Blade Length 2.25" Sharpened Harpoon Top 9.65" Overall Length .18" Blade Thickness 6.545 Ounces
    Saber Ground Satin Finish INFI Blade with Sharpened Harpoon Top w/Blended Convexed Edge
    This was made by Busse Custom Shop made for the Spring Knob Creek 2015 Show! Besides the completely custom Free Hand Ground Sharpened Harpoon Top Blade! This also has the hand finished satin blade all done by the Busse Custom Shop. This is a One of a Kind" and a True "Grail Knive!" The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .18" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $600













    Busse Combat Custom Shop Son of Badger SOB .195" Competition Finish Drop Trail Point Blade, Red/Black G10 Handle
    Son of Badger - SOB
    4.7" Blade Length 9.5" Overall Length .195 Blade Thickness 9.775 Ounces
    Drop Trail Point Saber Ground Competition Finish INFI Blade w/Blended Convexed Edge
    This was a very Limited Production Run Busse Combat made Exclusively for the Fall Knob Creek 2014 show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .195" thick with a Competition Finish which is no longer an option when ordering! The Convexed Ground Blade with V-grind Edge is Razor Sharp! INFI is a proprietary Steel is used by Busse Combat knives and this model was never avil for sale and probably NEVER AGAIN! This is Brand New, never used, carried or sharpened.
    $410













    SOB .18" Competition Finish Drop Trail Point Blade, Black Canvas Fingered Grooved Handle
    4.7" Blade Length 9.5" Overall Length .18" Blade Thickness 8.75 Ounces
    Drop Trail Point Saber Ground Competition Finish INFI Blade w/Blended Convexed Edge.
    This is an Exclusive that only a few were ever made for the Fall Knob Creek 2014 Show!
    $410












    Son of Badger .185" Saber Ground Competition Finish Blade, Magnum Orange/Black G10 Handle
    4.75" Blade Length 9.5" Overall Length
    Saber Ground Competition Finish INFI Blade w/Blended Convexed Edge
    This was a very Limited Production Run Busse Combat made for the Blade 2014 show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat!
    $380













    Son of Badger .185" Saber Ground Competition Finish Blade, Tan Canvas Micarta
    4.75" Blade Length 9.5" Overall Length
    Saber Ground Competition Finish INFI Blade w/Blended Convexed Edge
    This was a very Limited Production Run Busse Combat made for the Blade 2014 show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. $360


    Son of Badger .185" Saber Ground Competition Finish Blade, Black Canvas Micarta
    From Blade 2014 $360


    Son of Badger .185" Saber Ground Competition Finish Blade, Black/Tan G10
    From Blade 2014 $380


    Son of Badger .185" Saber Ground Competition Finish Blade, Tan G10
    From Blade 2014 $360


    Son of Badger .185" Saber Ground Competition Finish Blade, Olive Drab G10
    From Blade 2014 $370


    Son of Badger .185" Saber Ground Competition Finish Blade, Tigerhide
    From Blade 2014 $400












    Busse Custom Shop Son Of Badger SOB .17" Saber Ground Satin Blade, Black G10 G-rexed Smooth Sandstorm Handle
    4.75" Blade Length 9.55" Overall Length .17" Blade Thickness 9.575 14.695 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom made for the Fall Knob Creek 2014 show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $530













    Busse Custom Shop Son Of Badger SOB .175" Saber Ground Satin Blade, Black G10 G-rexed Smooth Red Tequila Sunrise G10 Handle
    4.75" Blade Length 9.55" Overall Length .17" Blade Thickness 9.77 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom made for the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .175" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $530













    Busse Custom Shop Son Of Badger SOB .17" Saber Ground Satin Blade, TigerHide Canvas G-rexed Smooth Olive Green G10 Handle
    4.75" Blade Length 9.55" Overall Length .17" Blade Thickness 9.28 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom made for the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $530

  5. #5













    Busse Custom Shop Son Of Badger SOB .17" Saber Ground Satin Blade, Black G10 G-rexed Blue/Black G10 Handle
    4.75" Blade Length 9.55" Overall Length .17" Blade Thickness 9.98 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom made for the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $530











    Busse Custom Shop Son Of Badger SOB .175" Saber Ground Satin Blade, Olive Green G10 G-rexed Smooth Tan G10 Handle
    4.75" Blade Length 9.55" Overall Length .175" Blade Thickness 9.985 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom Shop made for the Spring Knob Creek 2015 Show! Besides the completely custom handles, the tube fasteners are thicker and the cleanest set I have ever seen on a Busse Knife. I think they may be Titanium! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .175" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $500













    Busse Custom Shop Son Of Badger SOB Limited Edition #677 .175" Saber Ground Satin Blade, Textured Black Canvas Micarta Handle
    4.75" Blade Length 9.55" Overall Length .175" Blade Thickness 8.815 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Combat and now now long avil to be ordered. They brought this one to the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .175" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $430













    usse Custom Shop Son Of Badger SOB .17" Saber Ground Satin Blade, Orange Giraffe Bone Handle Mosaic Pins & Red/Thick Curly Oak/White Liners
    4.65" Blade Length 9.6" Overall Length .17" Blade Thickness 9.67 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom Shop made for the Spring Knob Creek 2015 Show! This set of handles are one of the most extensive I have ever seen on a Busse Son of Badger. It starts with Red Liners next to the Blade, than about .20" Thick Stabilized Curly Oak, than White Liners, than Orange Giraffe Bone all held together with Mosaic Pins! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $640













    Busse Custom Shop Son Of Badger SOB .17" Saber Ground Satin Blade, Black G10 G-rexed Smooth Tequila Sunrise G10 Handle
    4.75" Blade Length 9.55" Overall Length .17" Blade Thickness 9.98 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom made for the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    $530













    Busse Custom Shop SOB .17" Saber Ground Satin Blade, Full Curly Oak Handle w/Mosaic Pins & Yellow Liners
    4.75" Blade Length 9.55" Overall Length .17" Blade Thickness 8.885 Ounces
    Saber Ground Satin Finish INFI Blade w/Blended Convexed Edge
    This was made by Busse Custom made for the Spring Knob Creek 2015 Show! The Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat! This has a INFI Steel that is .17" thick with a Saber Ground Satin Finish! This is Brand New, never used, carried or sharpened.
    [/B]$530[B]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Trainer Variants (62t or B201)
    By bruzanHD in forum JerzeeDevil Balisong Alliance→
    Replies: 70
    Last Post: 02-19-2015, 11:19 PM
  2. FT: Want: Busse SAR-6 Have: Busse Boss Jack or Busse Cultellus
    By Oleathlaobhair in forum Knives For Sale/ For Trade
    Replies: 2
    Last Post: 10-13-2011, 01:50 PM
  3. Busse SS AD-Busse Sales Flyer-Amoralleather ABA/Meaner/AD Sheaths-CGFBM Kydex
    By Porcupinemtns66 in forum Knives For Sale/ For Trade
    Replies: 1
    Last Post: 12-15-2010, 11:25 PM
  4. WTS: Some Spyderco knives (some older discontinued variants)
    By gbelleh in forum Knives For Sale/ For Trade
    Replies: 1
    Last Post: 12-14-2010, 04:06 PM
  5. Madd Maxx variants
    By mndart in forum Factory & Production Knives
    Replies: 2
    Last Post: 03-13-2006, 08:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •