Results 1 to 9 of 9

Thread: Busse Active Duty

  1. #1

    Busse Active Duty

    Asking price does not include shipping or insurance due to size, weight, destination, and amount insured for but feel free to email me for shipping quotes and include your complete mailing address at liukang187@yahoo.com with any questions or if you want specific pictures taken.
    You can contact me for payment info. I am willing to ship to different countries as long as you take the risk and pay additional for shipping. I am not responsible for international shipments even though I have never had any problems. Check my feedback.
    If you are thinking about offering me a trade, please get me a description of what you want to trade me, along with the condition it is in (new, used, carried, scratched, sharpened) and pictures to my email and I will let you know. I reserve the right to refuse sale to anyone without any explanation at all.













    Max Duty Hack .10" Doublecut Hollow Ground ELMAX Blade, Orange/Black G10
    3.5" Blade Length 7.65" Overall Length
    .10" Thick Saber Hollow Ground ELMAX Steel
    Doublecut lalde Finish
    This has a full usable Choil to choke up on and get a better non slip grip.
    Very Few of these made for the Fall Knob Creek 2014 Show.
    $260













    Max Duty Hack .10" Doublecut Hollow Ground ELMAX Blade, Yellow/Black G10
    3.5" Blade Length 7.65" Overall Length
    .10" Thick Saber Hollow Ground ELMAX Steel
    Doublecut lalde Finish
    This has a full usable Choil to choke up on and get a better non slip grip.
    Very Few of these made for the Fall Knob Creek 2014 Show.
    $260











    Active Duty .19" Green Saber Ground Blade, Green Linen Handle w/Leather Sheath $400












    SOS Active Duty .22" Satin Blade, Convexed Edge, Orange G10 $430












    CS20 Active Duty, .19" Saber Ground Satin, G-rexed Blue Mammoth Tooth
    $1000






    SLUT AD .22" Hollow Satin, Full Red Mammoth Tooth w/Black Canvas & Grey Liners













    Busse Combat Active Duty .18" Flat Ground Sand Blade, Textured Sage G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.8" Overall Length 1" Blade Width .18" Blade Thickness 5.8 Ounces
    .18" Blade Thickness Flat Ground Blade with a V-Ground Edge
    Textured Sage G10 Handle
    INFI Blade Steel
    This knife is Brand New purchased directly from the 2010 Spring Knob Creek Show in KY.
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand. For the 2010 Spring Knob Creek Show in KY show, Busse Combat had a few knives all coated in this Sand Colored Coating and used this Sage G10. I have never seen this coating since and this is a super rare knife combination. This has a Flat Ground Blade with a V-ground edge that is razor sharp. This is Brand New, never used, carried or sharpened.
    $360













    KC215 Busse Combat Custom Shop Active Duty .22" Deep Hollow Ground Satin Blade, Full Snakewood Handle w/Mosaic Pins
    Active Duty - AD
    3.6" Blade Length 7.85" Overall Length .22" Blade Thickness 6.4 Ounces
    Custom Hand Ground Deep Hollow Ground Satin Blade INFI Blade Steel
    Custom Hand Shaped Full Snakewood Handle w/Mosaic Pins
    This is Brand New purchased by me directly from Busse Combat at the 2012 Knob Creek Show in KY.
    This is Brand New as directly from Busse so it was never used carried or Sharpened! The Active Duty knives were introduced in 2002 and have since been discontinued. This has a Hand Deep Hollow ground and this one weighs 6.4 ounces. The handle are hollowed out with a custom Hand ground super sharp Deep Hollow Grind. This has an incredible feel in the hand because of the thickness of the blade! This one is made of INFI Steel. This one is new and custom made by hand by the Busse Custom Shop, a RARE Super Find! This one has Full Snakewood Handle w/Mosaic Pins and the only one at the entire show. Each piece of Snakewood is different so each one is "One of a Kind"! This is Brand New, never used, carried or sharpened.
    $600













    Original Active Duty, Double Cut .15" Saber Ground w/Ergo Logo, Black G10 Handle
    3.6" Blade Length 7.8" Overall Length .15" Thick 5.5 Ounces
    .15" Doublecut (beadblasted) Saber Ground Blade with V-Grind
    INFI Blade Steel
    This was an Original Active Duty that was when these were first produced! Besides that it is the .15" Saber Ground knife, this one has that rare Ergo Logo and the Brass Tube Fasteners.
    The Saber Ground Blade with V-Grind Edge is Razor Sharp! Not many of these exist so here is your chance to own a piece of History! This is New, never used, carried or sharpened.
    $470









    Active Duty, Satin Sterile (no Busse Combat logo) blade with black Martica handle, this is one of the first Active Duties that came out in about 2002. This will come with a original leather sheath. $500











    Active Duty, Custom Shop Logo, .151" Saber Ground Doublecut blade w/Green Linen, this is one of the first Active Duties that came out in 2002. This will come with a original leather sheath. $500


    KC216 Active Duty .215" Deep Hollow Satin, Full Mammoth Tooth w/Black Liners













    Busse Combat Custom Shop Active Duty .17" Flat Ground Satin Blade, Full Green/Brown Maple Wood Handle w/Mosaic Pins
    Active Duty - AD
    3.6" Blade Length 7.85" Overall Length 1.10" Blade Width .17" Blade Thickness 5.6 Ounces
    Flat Ground Satin Finished Blade with V-Ground Edge
    Custom Hand Shaped Full Green/Brown Maple Wood Handle w/Mosaic Pins
    INFI Blade Steel
    This is Brand New from Epic Customganzaaaaaa of 2008.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop. This was made in 2008 and in Mint Condition. You can tell by the handle that a lot of thought and work went into this knife. This has beautiful matched wood, split, dyed different colors. This has a INFI Steel that is .17" thick with a hand Satin Finish! This has custom Handle that is Beautiful and feels great in the Hand. The flat Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $500













    Busse Combat Custom Shop Boney Active Duty .135" Flat Ground Satin Blade, Full Curly Oak/Striped Maple Handle w/Mosaic Pins
    Active Duty - AD
    3.5" Blade Length 7.8" Overall Length 1.05" Blade Width .135" Blade Thickness 4.6 Ounces
    Flat Ground Satin Finished Blade with V-Ground Edge
    Custom Hand Shaped Full Full Curly Oak/Striped Maple Handle w/Mosaic Pins
    INFI Blade Steel
    This is Brand New from Epic Customganzaaaaaa of 2008.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop. This was made in 2008 and in that year, Jerry Busse introduced the Boney Active Duty. The difference is that the blade is thinner at about .135" thick and the hardness on these went to a 60-62 Rockwell Hardness. "The edge of the primary bevel is ground down to .012" - .015" prior to sharpening and the distal taper extends nearly the full length of the cutting edge!" You can tell by the handle that a lot of thought and work went into this knife. This has beautiful with both Blue/Brown Curly Oak and Tan/Brown Striped Maple wood, split, dyed different colors and put together with a red liner in-between. This has a INFI Steel that is .135" thick with a hand Satin Finish! This has custom Handle that is Beautiful and feels great in the Hand. The flat Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    This is from the Epic Customganzaaaaaa of 2008
    $525













    Busse Combat Custom Shop Boney Active Duty .135" Flat Ground Satin Blade, Full Striped Maple Handle w/Mosaic Pins
    Active Duty - AD
    3.55" Blade Length 7.85" Overall Length 1.05" Blade Width .135" Blade Thickness 4.7 Ounces
    Flat Ground Satin Finished Blade with V-Ground Edge
    Custom Hand Shaped Full Dual Colored Striped Maple Handle w/Mosaic Pins
    INFI Blade Steel
    This is Brand New from Epic Customganzaaaaaa of 2008.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop. This was made in 2008 and in that year, Jerry Busse introduced the Boney Active Duty. The difference is that the blade is thinner at about .135" thick and the hardness on these went to a 60-62 Rockwell Hardness. "The edge of the primary bevel is ground down to .012" - .015" prior to sharpening and the distal taper extends nearly the full length of the cutting edge!" You can tell by the handle that a lot of thought and work went into this knife. This has beautiful with Dual Colored Striped Maple wood, split, dyed different colors and put together with a red liner in-between. This has a INFI Steel that is .135" thick with a hand Satin Finish! This has custom Handle that is Beautiful and feels great in the Hand. The flat Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $525













    Busse Custom Shop BAD Boney Active Duty Variant .14" Camo w/Unsharpened Top Swedge, Black Paper Handle
    3.6" Blade Length 7.8" Overall Length .14" Thick 4.570 Ounces
    .14" Flat Ground Blade with V-Grind and Unsharpened Top Swedge
    INFI Blade Steel
    60-62 RC
    This was from the Spring 2010 Knob Creek Show!
    The BAD Boney Active Duty made by Busse Combat This has a INFI Steel that is thinner at .14" thick with a higher Rockwell Hardness that was only made in a small run in 2008 and has long since been discontinued! The Flat Ground Satin Blade with the V-Grind Edge is Razor Sharp! I have never seen anything like this one before and is definitely "One of a Kind!" This is New, never used, carried or sharpened. $450










    Active Duty Custom Shop .165" Satin Blade, Hand Shaped Horn Handle w/Mosaic $550









    CS431 Custom Shop Busse Combat Active Duty .175" Flat Ground Satin Blade, Full Buckeye Burl Handle w/Mosaic Pins
    Active Duty - AD
    3.45" Blade Length 7.8" Overall Length 1" Blade Width .175" Blade Thickness 5.1 Ounces
    Flat Ground Satin Finished Blade with Blended Convex Edge
    Custom Hand Shaped Full Buckeye Burl Handle w/Mosaic Pins
    INFI Blade Steel
    This is Brand New purchased directly from the 2011 Blade Show in Atlanta Ga.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop. This one is new and custom made by hand by the Busse Custom Shop, a RARE Super Find and definitely a "One of a Kind!" This was purchase by me directly me from Busse Combat at the Blade 2011 show. This is Flat Ground with a Factory Blended Convex Edge, Very Sharp! These Active Duty were never produced in this thickness as a production run and was only available at shows and only a handful were ever made. This set of matching Buckeye Burl Handle were hand picked by the Busse Custom shop. Each piece of Buckeye Burl Handle is different so each one is "One of a Kind!" This is Brand New, never used, carried or sharpened.
    $500



    CS435 Active Duty.17" Convexed Flat Ground Satin, Full Giraffe Bone Handle w/Mosaic $400












    CS436 Busse Custom Shop S.L.U.T. Active Duty .22" Hollow Satin, Black G10 G-rexed Striped Maple Wood Handle
    Active Duty S.L.U.T. Super Lightweight Ultra Thick
    3.5" Blade and 7.9" Overall .22" Blade Thickness 5.25 Ounces
    Custom Hand Ground Deep Hollow Ground Satin Blade INFI Blade Steel
    This was purchased by me at the Blade 2011 Show in Atlanta Ga.
    This is Brand New as directly from Busse so it was never used carried or Sharpened! The Active Duty knives were introduced in 2002 and have since been discontinued. This S.L.U.T. was introduced in 2011 and than was discontinued right away but never was a production knife since a few were made for the Ganza and two knife shows. This has a Deep Hollow ground and this one weights 5.2 ounces because a lot of steel was removed from this model. The handle are hollowed out while the blade has a super sharp Deep Hollow Grind. This has an incredible feel in the hand because of the thickness of the blade! This one is made of INFI Steel. This one is new and custom made by hand by the Busse Custom Shop, a RARE Super Find since there were only a handful made with custom handles. This one has the Black G10 G-rexed Striped Maple Wood Handle only a handful made and each one is hand custom made by the Busse Custom shop. Each piece of wood is different so each one is "One of a Kind" This is one of a kind! As with all Busse Combat knives, this carries a Lifetime Warranty for the life of the knife.! Here is your chance to own a beautiful piece of History!$570













    Busse Combat Active Duty .192" Moss Green Flat Ground Blade, Textured Desert Sage/Smog G10 Handle
    This is Brand New from the Blade Show in Atlanta 2011
    3.4" Blade Length 7.75" Overall Length 1" Blade Width .192" Blade Thickness 6.2 Ounces
    .192" Blade Thickness Saber Ground Blade with V-Ground Edge
    Textured Desert Sage or otherwise known as Smog G10 Handle.
    INFI Blade Steel
    This knife is Brand New purchased directly from the 2011 Blade Show in Atlanta Ga.
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. This was made over four years ago made by Busse Combat This has a INFI Steel that is .18" thick with a Moss Coated Blade for the Blade Show in Atlanta 2011! At that show, Busse made only a few knives in a few different colors that they have never done before, so this is "One of a Kind" and you will never find another one like it. The Flat Ground Blade with the V-Grind Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $350
    Last edited by Liu Kang; 03-14-2016 at 02:06 PM.

  2. #2















    Busse Combat Custom Shop Active Duty .16" Saber Ground Satin Blade, Red Tequila G10 G-rexed Musk Ox Handle w/Mosaic Pins
    3.6" Blade Length 7.85" Overall Length .16" Blade Thickness 6.3 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Red Tequila G10 G-rexed Musk Ox Handle w/Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Activity Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .16" thick with a Satin Finish! The handle is Hand Shaped Red Tequila G10 G-rexed Musk Ox Handle w/Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $1170





    Acitve Duty .23" White Flat Ground Blade, Blue/Black G10 Handle $340



    Active Duty .18" Flat Ground Sand Blade, Tan Canvas Micarta Handle
    This is from the Spring Knob Creek Show of 2010
    $325


    Active Duty .20" Saber Ground Black Blade w/Tigerhide Micarta Handle $325


    Active Duty, .17" Satin Blade with Black/Blue G10 $380


    Easton Show Active Duty Tequila Sunrise G10, Satin Blade$380













    Busse Combat Custom Shop Active Duty Bowie Variant .175" Flat Ground Re-Curve Satin Blade, Custom Re-Shaped Black Canvas Micarta Handle w/Smooth Brass Bolt
    3.6" Blade Length 7.8" Overall Length .175" Thick 5.465 Ounces
    .175" Flat Ground Blade with V-Grind
    INFI Blade Steel
    This is Brand New from the AG Russell Show in AR in 2010.
    The Busse Combat Active Duty was introduced by Jerry Busse in 2002 and has long since been discontinued! This one was made by the Busse Combat Custom Shop with a free hand ground with a Bowie Ground front top with a re-curve Blade with the V-Grind Edge is Razor Sharp! I have never seen anything like this one before and is definitely "One of a Kind!" This is New, never used, carried or sharpened. INFI is a proprietary Steel is used ONLY by Busse Combat. This knife will carry a lifetime warranty from Busse Combat!
    $375



    Easton Show Active Duty Satin Blade Red/Black G10 .170" $390







    Busse Nuclear EDC .175" Satin/Frosted Re-curve Blade, Tigerhide Handle $365



    Custom Shop Active Duty Variant .17" Doublecut w/sharpened top swedge Blue/Black G10 $400




    Custom Shop Active Duty Variant Satin Blue/Red Super Thick Magnum G10 $460


    Knob Creek Active Duty, .18" Sand Blade with Tan Micarta $325



    Knob Creek Lean Active Duty .14" Sage/Brown blade w/Nuclear Meltdown Treatment on Spine w/Smog G10 $350













    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, Full Black Ram's Horn Handle w/Yellow Liners & Mosaic Pins
    3.6" Blade Length 7.58" Overall Length .165" Blade Thickness 5.4 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Full Black Ram's Horn Handle w/Yellow Liners & Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Full Black Ram's Horn Handle w/Yellow Liners & Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $460


    Milganza Active Duty .20" Saber Ground Sage Blade, Textured Black Canvas Micarta Handle
    3.55" Blade Length 7.85" Overall Length 1.05" Blade Width .20" Blade Thickness 6.3 Ounces
    Saber Ground Sage Crinkle coated Blade with V-Ground Edge
    Textured Black Canvas Micarta Handle
    This knife was only made for a single Ganza in 2007 and original thread can be found here.
    $360
    Last edited by Liu Kang; 03-16-2016 at 07:30 PM.

  3. #3













    Busse Combat BAD Boney Active Duty .14" Satin Blade, Black G10 Handle
    3.6" Blade Length 7.8" Overall Length .14" Thick 5.195 Ounces
    .14" Flat Ground Blade with V-Grind
    INFI Blade Steel
    60-62 RC
    The BAD Boney Active Duty made by Busse Combat This has a INFI Steel that is thinner at .14" thick with a higher Rockwell Hardness that was only made in a small run in 2008 and has long since been discontinued! The Flat Ground Satin Blade with the V-Grind Edge is Razor Sharp! This is New, never used, carried or sharpened.
    $370


    BAD, Satin Blade with Full Teal Mammoth Tooth Handle with White Liners













    CS0 Busse Combat Custom Shop Off Duty .345" Deep Hollow Grind, Full Red/White Mammoth Tooth Handle w/White Liners & w/Mosaic Pins
    3.65" Blade Length 7.9" Overall Length .345" Blade Thickness 9.4 Ounces
    .345" Blade Thickness Hand Ground Full Height Deep Hollow Ground with Choil.
    INFI Blade Steel
    This knife does not have a swedge
    This was a very few of these made by hand by Jerry Busse when he introduced the Off Duty in 2004. Very few were ever made! This is a one of a kind and and you will NEVER see another one like this! This Active Duty has been discontinued and will never be made again! The Hand Ground Full Height Deep Hollow Ground is Razor Sharp! This knife was never used, carried or sharpened! This has a custom made handle with matched Red/White Mammoth Tooth Handle w/White Liners & w/Mosaic Pins. This knife will carry a lifetime warranty from Busse Combat! This is Brand New, never used, carried or sharpened.
    $2750


    In-active Duty, .32" Satin Blade, G-rexed w/Blue Mammoth Bark and Moosic Pins


    CS18 Active Duty, .19" Saber Ground Satin, G-rexed Red Mammoth Tooth


    CS19 Active Duty, .19" Saber Ground Satin, G-rexed Red Mammoth Tooth


    CS20 Active Duty, .19" Saber Ground Satin, G-rexed Blue Mammoth Tooth


    CS21 Active Duty, .19" Saber Ground Satin, G-rexed Green Mammoth Tooth


    CS22 Active Duty, .19" Saber Ground Satin, G-rexed Brown Marble Mammoth Ivory Bark













    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, SandStorm G10 G-rexed Mammoth Tooth Bolstered Lacewood Handle w/Mosaic Pins
    3.65" Blade Length 7.9" Overall Length .165" Blade Thickness 6.1 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    SandStorm G10 G-rexed Mammoth Tooth Bolstered Lackwood Handle w/Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is SandStorm G10 G-rexed Mammoth Tooth Bolstered Lacewood Handle w/Mosaic Pins is Beautiful and feels great in the Hand. You can see there was a lot of thought and time put into making this perfect knife! The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $630

  4. #4













    CS389 Busse Combat Custom Shop S.L.U.T. Active Duty .22" Deep Hollow Ground Satin Blade, Full Yellow Giraffe Bone Handle w/Mosaic Pins
    Active Duty S.L.U.T. Super Lightweight Ultra Thick
    3.6" Blade and 7.9" Overall .22" Blade Thickness 5 Ounces
    Custom Hand Ground Deep Hollow Ground Satin Blade INFI Blade Steel
    Custom Hand Shaped Full Yellow Giraffe Bone w/Mosaic Pins
    This is Brand New purchased by me directly from Busse Combat at the East Coast Custom Knife Show 2011.
    This is Brand New as directly from Busse so it was never used carried or Sharpened! The Active Duty knives were introduced in 2002 and have since been discontinued. This S.L.U.T. was introduced in 2011 and than was discontinued right away but never was a production knife since a few were made for the Ganza and two knife shows. This has a Deep Hollow ground and this one weighs 5 ounces because a lot of steel was removed from this model. The handle are hollowed out while the blade has a super sharp Deep Hollow Grind. This has an incredible feel in the hand because of the thickness of the blade! This one is made of INFI Steel. This one is new and custom made by hand by the Busse Custom Shop, a RARE Super Find since there were only a handful made with custom handles. This one has Yellow Giraffe Bone Handle only a handful made and each one is hand custom made by the Busse Custom shop. Each piece of Giraffe Bone is different so each one is "One of a Kind" This is one of a kind! This is Brand New, never used, carried or sharpened.
    $550



    CS320 SLUT AD .22" Deep Hollow Ground Satin Blade, G-rexed Blue Coral w/Blue Liners Sold
    CS321 SLUT AD .22" Deep Hollow Ground Satin Blade, G-rexed Bright Green Mammoth Tooth



    CS322 SLUT AD .22" Deep Hollow Ground Satin Blade, G-rexed Red/Orange Mammoth Tooth
    CS323 SLUT AD .22" Deep Hollow Ground Satin Blade, G-rexed Green Mammoth Tooth



    CS324 SLUT AD .22" Hollow Satin, G-rexed Blue Mammoth Tooth
    CS325 SLUT AD .22" Deep Hollow Ground Satin Blade, G-rexed Dark Blue Mammoth Tooth



    CS326 SLUT AD .22" Hollow Satin, G-rexed Blue Mammoth Ivory Bark Sold
    CS327 SLUT AD .22" Deep Hollow Ground Satin Blade, G-rexed Elephant Ivory Bark



    CS328 SLUT AD .22" Hollow Satin, G-rexed Elephant Ivory Bark
    CS329 SLUT AD .22" Hollow Satin, G-rexed Elephant Ivory Bark



    CS330 SLUT AD .22" Deep Hollow Ground Satin Blade, G-rexed Elephant Ivory Bark



    NJ92 SLUT AD .22" Deep Hollow Ground Satin Blade, Bright Green Giraffe Bone with Solid Pins $550













    NJ65 Busse Combat Custom Shop S.L.U.T. Active Duty .22" Deep Hollow Ground Satin Blade, Full Pink/White Giraffe Bone w/Mosaic Pins
    Active Duty S.L.U.T. Super Lightweight Ultra Thick
    3.5" Blade and 7.9" Overall .22" Blade Thickness 5.0 Ounces
    Custom Hand Ground Deep Hollow Ground Satin Blade INFI Blade Steel
    Custom Hand Shaped Full Pink/White Giraffe Bone w/Mosaic Pins
    This is Brand New purchased by me directly from Busse Combat at the East Coast Custom Knife Show 2011.
    This is Brand New as directly from Busse so it was never used carried or Sharpened! The Active Duty knives were introduced in 2002 and have since been discontinued. This S.L.U.T. was introduced in 2011 and than was discontinued right away but never was a production knife since a few were made for the Ganza and two knife shows. This has a Deep Hollow ground and this one weighs about 5.2 ounces because a lot of steel was removed from this model. The handle are hollowed out while the blade has a super sharp Deep Hollow Grind. This has an incredible feel in the hand because of the thickness of the blade! This one is made of INFI Steel. This one is new and custom made by hand by the Busse Custom Shop, a RARE Super Find since there were only a handful made with custom handles. This one has Pink/White Giraffe Bone Handle only a handful made and each one is hand custom made by the Busse Custom shop. Each piece of Giraffe Bone is different so each one is "One of a Kind" This is one of a kind!
    $550



    NJ68 SLUT AD .22" Deep Hollow Ground Satin Blade, G-rexed Striped Maple w/Moosic Pins $600



    CS436 SLUT AD .22" Deep Hollow Ground Satin Blade, G-rexed Striped Maple Wood Handle w/Moosic Pins $600










    NJ67 SLUT AD .22" Deep Hollow Ground Satin Blade, Purple Buckeye Blur Wood with Solid Pins $570



    NJ64 SLUT AD .22" Deep Hollow Ground Satin Blade, Pink Giraffe Bone w/Moosic Pins $540













    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, Full Green/Tan Mammoth Tooth Handle w/Mosaic Pins & Green Liners
    3.6" Blade Length 7.85" Overall Length .165" Blade Thickness 6.4 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Full Green/Tan Mammoth Tooth Handle w/Mosaic Pins & Green Liners
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Full Green/Tan Mammoth Tooth Handle w/Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $900













    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, Full Spalted Maple Handle w/Black G10 Liners & Mosaic Pins
    3.6" Blade Length 7.85" Overall Length .165" Blade Thickness 5.7 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Full Spalted Maple Handle w/Black G10 Liners & Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Full Spalted Maple Handle w/Black G10 Liners & Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $470













    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, Black G10 G-rexed Curly Oak Handle w/Mosaic Pins
    3.65" Blade Length 7.85" Overall Length .165" Blade Thickness 5.8 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Black G10 G-rexed Curly Oak Handle w/Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Black G10 G-rexed Curly Oak Handle w/Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $490

  5. #5













    CS474 Busse Combat Custom S.L.U.T. Active Duty - AD .22" Deep Hollow Ground Satin Blade, Full Fossil Bark Handles Bark Handle with Mosaic Pins
    Active Duty S.L.U.T.- Super Lightweight Ultra Thick with Skeletonized Handle
    3.6" Blade 7.9" Overall 4.505 Ounces
    .22" Blade Thickness Deep Hollow Ground
    INFI Blade Steel
    Fossil Bark Handles Bark Handle with Mosaic Pins
    $1200












    CS1 Busse Combat Custom Shop In-active Duty .32" Satin Blade, Black G10 G-rexed w/Blue Fossil Bark and Mosaic Pins
    3.6" Blade Length 7.9" Overall Length .32" Blade Thickness 10.025 Ounces
    Satin Finished INFI Blade Steel
    Saber Ground/Hand Deep Ground Hollow Ground
    This was a very few of these made by hand by Jerry Busse when he introduced the In-active Duty in 2009. Very few were ever made! This has INFI Steel that is .32" thick with a Satin Finish! The Full Height Hollow Ground Satin Blade is Razor Sharp! This knife has a Black G10 G-rexed with Blue Fossil Bark Mosaic Pins! This is a True Custom and "One of a Kind!" This knife was never used, carried or sharpened! This knife will carry a lifetime warranty from Busse Combat!
    $2000




    OK, these are Extra Large Active Duty. These were avil at Blade 2011. These are a cross between a Meaner Street and a Active Duty. This have a 4" Full Convexed Satin Blade that is about .16" Thick. They were all made with a full Giraffe Bone Handle and as you can see, there were only 10 of these made. All of them are slightly different because of the natural pattern of the Giraffe Bone. The above pictures are for size comparison only. I have a few of these but these will go fast so get them fast!






    CS428 Large AD 4" Blade.16" Convexed Satin, Full Giraffe Bone Handle, (1 of 10) $430













    Busse Combat Custom Shop S.L.U.T. Active Duty .23" Deep Hollow Ground Satin Blade, Black G10 G-rexed Red/White Mammoth Tooth Handle w/Mosaic Pins & Grey Liners
    Active Duty S.L.U.T. Super Lightweight Ultra Thick
    3.65" Blade Length 7.9" Overall Length .23" Blade Thickness 6.0 Ounces
    Custom Hand Ground Deep Hollow Ground Satin Blade INFI Blade Steel
    This is Brand New purchased directly from Busse Combat.
    This is Brand New as directly from Busse so it was never used carried or Sharpened! The Active Duty knives were introduced in 2002 and have since been discontinued. This S.L.U.T. was introduced in 2011 and than was discontinued right away but never was a production knife since a few were made for the Ganza and two knife shows. This has a Deep Hollow ground and this one weighs 6.0 ounces because a lot of steel was removed from this model but the handles are thick. The handle are hollowed out while the blade has a super sharp Deep Hollow Grind. This has an incredible feel in the hand because of the thickness of the blade! This one is made of INFI Steel. This one is new and custom made by hand by the Busse Custom Shop, a RARE Super Find since there were only a handful made with custom handles. This one has Black G10 G-rexed Red/White Mammoth Tooth Handle w/Mosaic Pins & Grey Liners and each one is hand custom made by the Busse Custom shop. Each piece of the matched set of Mammoth Tooth is different so each one is "One of a Kind" This is one of a kind! As with all Busse Combat knives, this carries a Lifetime Warranty for the life of the knife! This is Brand New, never used, carried or sharpened.
    $1130

  6. #6



    Max Duty .10" Hollow Ground Satin ElMax Blade, Full Bubinga Wood Handle $360











    Max Duty .095" Hollow Ground Satin ElMax Blade, Olive/Black G10 Handle
    $290


    Max Duty .095" Hollow Ground Satin ElMax Blade, Yellow/Black G10 Handle
    $290


    Busse Custom Shop MAX Warden .095" Hollow Ground Satin ElMax Blade, Orange/Black G10 Handle
    3.6" Blade Length 7.8" Overall Length
    ElMax Blade Steel
    Saber/Hollow Ground Satin Blade
    This was an exclusive for the Blade 2014 Show in Atlanta Ga.
    This was a very few of these made by hand by the Custom Shop and I purchased this knife directly from Busse Combat at the Blade 2014. This has a ElMax Steel that is .095" thick with a satin Finish! The Saber/Hollow Ground Satin Blade is Razor Sharp! This is Brand New, never used, carried or sharpened. I purchased this directly from Busse Combat and it was never used, carried or sharpened! This knife will carry a lifetime warranty from Busse Combat!
    $290


    Max Duty .095" Hollow Ground Satin ElMax Blade, Black/Tan G10 Handle
    $290


    Max Duty .095" Hollow Ground Satin ElMax Blade, Red Tequila Sunrise G10 Handle
    $290


    MAX Warden .09 Hollow Ground Satin ElMax Blade, Blue/Black G10 Handle
    $295













    CS481 Busse Custom Shop Active Duty .22" Deep Hollow Satin, Full Curly Oak Handle w/Mosaic
    This one is .215" thick, 3.5" Blade and 7.88" Overall 6.525 Ounces
    Hand Ground Deep Hollow Ground Satin Blade
    INFI Blade Steel
    This is Brand New as directly from Busse. The Active Duty knives were introduced in 2002 and have since been discontinued. This one is made of INFI Steel. This one is new and custom made by hand by the Busse Custom Shop, a RARE Super Find! Here is your chance to own a beautiful piece of History! This was purchase by me directly me from Busse Combat.
    This is a Hand Ground Deep Hollow Ground Satin Blade, Very Sharp! These Active Duty were never produced in this thickness as a production run and was only avil at the one Show. The Full Curly Oak Handle w/Mosaic Pins weren't done in batches, there were only a handful made and each one is hand custom made by the Busse Custom shop. Each piece of wood is different so each one is "One of a Kind" This is one of a kind! As with all Busse Combat knives, this carries a Lifetime Warranty for the life of the knife. I have a C.A.B.S. Busse Custom Shop Choiless Anorexic Boss Street posted here on ebay and my forums that has the exact same matching Full Curly Oak Handle so it would make a great set!$570

















    Off Duty .38" Saber Ground Sage Coated Deep Hollow Ground Blade, Textured Snakeskin Handle
    3.5" Blade 7.75" Overall Length .38" Blade Thickness 10.25 Ounces
    .38" Blade Thickness Hand Ground Deep Hollow Ground with Sage Coating
    INFI Blade Steel
    Saber Hand Ground Deep Hollow Ground with a Swedge
    This was a very few of these made by hand by Jerry Busse when he introduced the Off Duty in 2004. Very few were ever made! This is a one of a kind and is the THICKEST Off Duty ever made because it's coated! This color sage coating and the textured snakeskin coated along with this model Active Duty has been discontinued and will never be made again! The Saber Hand Ground Deep Hollow Ground is Razor Sharp! This knife was never used, carried or sharpened!
    $2200













    Busse Combat Custom Shop Active Duty .16" Saber Ground Satin Blade w/Swedge, Textured Black Linen Micarta Handle
    3.6" Blade Length 7.8" Overall Length .16" Blade Thickness 5.8 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Textured Black Linen Micarta Handle
    Tube Fasteners
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .16" thick with a Satin Finish! I believe the handle is Textured Black Linen Micarta Handle which is very rare as I have only seen this on a few knives in my life. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $425













    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, Full Teal/Cream Colored Giraffe Bone Handle w/Black Liners & Mosaic Pins
    3.6" Blade Length 7.8" Overall Length .165" Blade Thickness 6.5 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Full Teal/Cream Colored Giraffe Bone Handle w/Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Activity Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Full Teal/Cream Colored Giraffe Bone Handle w/Black Liners & Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $450













    Busse Combat Custom Shop Active Duty .16" Saber Ground Satin Blade, Full White Giraffe Bone Handle w/Thick Curly Maple Liners & Mosaic Pins
    3.6" Blade Length 7.85" Overall Length .165" Blade Thickness 6.1 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Full White Giraffe Bone Handle w/Thick Curly Maple & Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Activity Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Full White Giraffe Bone Handle w/Thick Curly Maple Liners & Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $450













    Busse Combat Custom Shop Active Duty .16" Saber Ground Satin Blade, Yellow/Black G10 G-rexed Striped Maple Wood Handle w/Mosaic Pins
    3.65" Blade Length 7.85" Overall Length .16" Blade Thickness 6.0 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Hand Shaped Yellow/Black G10 G-rexed Striped Maple Wood Handle w/Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .16" thick with a Satin Finish! The handle is Hand Shaped Yellow/Black G10 G-rexed Striped Maple Wood Handle w/Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $470













    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, Full White Camel Bone Handle w/Blue Liners & Mosaic Pins
    3.5" Blade Length 7.8" Overall Length .165" Blade Thickness 6.2 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Full White Camel Bone Handle w/Blue Liners & Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Full White Camel Bone Handle w/Blue Liners & Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $450













    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, Full Giraffe Bone Handle w/Grey & Red Liners & Mosaic Pins
    3.6" Blade Length 7.85" Overall Length .165" Blade Thickness 6.1 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Full Giraffe Bone Handle w/Grey & Red Liners & Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Full Giraffe Bone Handle w/Grey & Red Liners & Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $450

  7. #7













    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, Full Mammoth Ivory Bark Handle w/Red & Blue Liners & Mosaic Pins
    3.6" Blade Length 7.85" Overall Length .165" Blade Thickness 5.7 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Full Mammoth Ivory Bark Handle w/Red & Blue Liners & Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Full Mammoth Ivory Bark Handle w/Red & Blue Liners & Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $900













    CS477 Busse Combat Custom Shop S.L.U.T. Active Duty .22" Deep Hollow Ground Satin Blade, Full Fire Red Mammoth Tooth with Black Canvas/Grey Liners & Mosaic Pins
    Active Duty S.L.U.T. Super Lightweight Ultra Thick
    3.6" Blade Length 7.85" Overall Length .22" Blade Thickness 5.6 Ounces
    Custom Hand Ground Deep Hollow Ground Satin Blade INFI Blade Steel
    This is Brand New purchased directly from Busse Combat.
    This is Brand New as directly from Busse so it was never used carried or Sharpened! The Active Duty knives were introduced in 2002 and have since been discontinued. This S.L.U.T. was introduced in 2011 and than was discontinued right away but never was a production knife since a few were made for the Ganza and two knife shows. This has a Deep Hollow ground and this one weighs 5.6 ounces because a lot of steel was removed from this model but the handles are thick. The handle are hollowed out while the blade has a super sharp Deep Hollow Grind. This has an incredible feel in the hand because of the thickness of the blade! This one is made of INFI Steel. This one is new and custom made by hand by the Busse Custom Shop, a RARE Super Find since there were only a handful made with custom handles. This one has Full Fire Red Mammoth Tooth w/Black Canvas & Grey Liners and each one is hand custom made by the Busse Custom shop. Each piece of the matched set of Mammoth Tooth is different so each one is "One of a Kind" This is one of a kind and Gorgous Fire color is INCREDIBLE! As with all Busse Combat knives, this carries a Lifetime Warranty for the life of the knife! This is Brand New, never used, carried or sharpened.
    $1300













    Busse Combat Custom Shop Active Duty .165" Saber Ground Satin Blade, SandStorm G10 G-rexed Blue Mammoth Tooth Handle w/Mosaic Pins
    3.6" Blade Length 7.85" Overall Length .165" Blade Thickness 6.4 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Hand Smoothed SandStorm G10 G-rexed Blue Mammoth Tooth Handle w/Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Hand Smoothed SandStorm G10 G-rexed Blue Mammoth Tooth Handle w/Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $900













    Busse Combat Custom Shop Active Duty .16" Saber Ground Satin Blade, Black/Tan G10 G-rexed Green/White Mammoth Tooth Handle w/Mosaic Pins & Black Liners
    3.6" Blade Length 7.85" Overall Length .16" Blade Thickness 6.8 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Hand Smoothed Black/Tan G10 G-rexed Green/White Mammoth Tooth Handle w/Mosaic Pins & Black Liners
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Hand Smoothed Black/Tan G10 G-rexed Green/White Mammoth Tooth Handle w/Mosaic Pins & Black Liners is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $900













    Busse Combat Custom Shop Active Duty .16" Saber Ground Satin Blade, Full Mammoth Ivory Bark Handle w/Green Liners & Mosaic Pins
    3.5" Blade Length 7.85" Overall Length .16" Blade Thickness 5.6 Ounces
    Saber Ground Blade with a V-Ground Edge with Small Choil
    INFI Blade Steel
    Hand Smooth Custom Full Mammoth Ivory Bark Handle w/Green Liners & Mosaic Pins
    This is from the Fall Knob Creek 2015 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2015 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .165" thick with a Satin Finish! The handle is Hand Shaped Full Mammoth Ivory Bark Handle Finished off with Green Liners & Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $900














    Busse Combat Custom Shop Active Duty .155" Flat Ground Satin Blade, Full White Giraffe Bone Handle w/Mosaic Pins
    3.5" Blade Length 7.8" Overall Length .155" Blade Thickness 5.6 Ounces
    Flat Ground Blade with a Blended Convexed Edge with Small Choil
    INFI Blade Steel
    Full White Giraffe Bone Handle w/Mosaic Pins
    This is Brand New from the Fall Knob Creek 2013 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2013 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .155" thick with a Satin Finish! The handle is Hand Shaped Full White Giraffe Bone Handle w/Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $450













    Busse Combat Custom Shop Active Duty .155" Flat Ground Satin Blade, Full Pink Giraffe Bone Handle w/Mosaic Pins
    3.5" Blade Length 7.8" Overall Length .155" Blade Thickness 5.7 Ounces
    Flat Ground Blade with a Blended Convexed Edge with Small Choil
    INFI Blade Steel
    Full Pink Giraffe Bone Handle w/Mosaic Pins
    This is Brand New from the Fall Knob Creek 2013 Knife Show in KY.
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop Exclusively for the Fall Knob Creek 2013 Knife Show in KY. I purchased this Custom Shop knife directly from Busse Combat the Knob Creek Show. This has a INFI Steel that is .155" thick with a Satin Finish! The handle is Hand Shaped Full Pink Giraffe Bone Handle w/Mosaic Pins is Beautiful and feels great in the Hand. The Saber Ground Blade with a Blended Convexed Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $450













    Busse Combat Custom Shop Active Duty .17" Flat Ground Satin Blade, Full Brown/Black Blur Wood Handle w/Mosaic Pins
    3.6" Blade Length 7.85" Overall Length .17" Blade Thickness 5.7 Ounces
    Flat Ground Satin Finished Blade with V-Ground Edge
    Custom Hand Shaped Full Brown/Black Blur Wood Handle w/Mosaic Pins
    INFI Blade Steel
    This is Brand New from either a knife show Busse Combat attended or an online Ganza
    The Busse Active Duty was introduced by Jerry Busse in 2002 and has since been discontinued even though it is one of the most popular and versatile models. The size of the knife makes it very easy to wear and carry everywhere if you prefer fixed blades to be on you at all times. There were very few of these Active Duty blanks made in this thickness made by Busse Combat Custom Shop. This was made about 2007 and in Mint Condition. You can tell by the handle that a lot of thought and work went into this knife. This has beautiful matched wood, split, dyed different colors and put together with a red liner in-between. This has a INFI Steel that is .17" thick with a hand Satin Finish! This has custom Handle that is Beautiful and feels great in the Hand. The flat Ground Blade with a V-Ground Edge is Razor Sharp! This is Brand New, never used, carried or sharpened.
    $500

  8. #8













    Busse Combat Battle Grade Active Duty .195" Saber Ground Black Blade, Textured Red/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .195" Blade Thickness 6.4 Ounces
    .195" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Red/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is like New, never used, carried or sharpened.
    $225













    Busse Combat Battle Grade Active Duty .19" Saber Ground Black Blade, Textured Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .19" Blade Thickness 6.4 Ounces
    .19" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    $230













    Busse Combat Battle Grade Active Duty .185" Saber Ground Tanker Grey Blade, Textured Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.5 Ounces
    .185" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    $230













    Busse Combat Battle Grade Active Duty .185" Saber Ground Tanker Grey Blade, Textured Black/Tan G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.3 Ounces
    .185" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Black/Tan G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    $230













    Busse Combat Battle Grade Active Duty .185" Saber Ground Tanker Grey Blade, Textured Black/Green G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.4 Ounces
    .185" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Black/Green G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    $230













    Busse Combat Battle Grade Active Duty .185" Saber Ground Tanker Grey Blade, Textured Blue/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.2 Ounces
    .185" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Blue/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    $230













    Busse Combat Battle Grade Active Duty .19" Saber Ground Black Crinkle Blade, Textured Blue/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .19" Blade Thickness 6.1 Ounces
    .19" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Blue/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    $230

  9. #9













    Busse Combat Battle Grade Active Duty .19" Saber Ground Black Crinkle Blade, Textured Green/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .19" Blade Thickness 6.3 Ounces
    .19" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Green/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    $230













    Busse Combat Battle Grade Active Duty .195" Saber Ground Black Crinkle Blade, Textured Black/Tan G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .195" Blade Thickness 6.4 Ounces
    .19" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Black/Tan (Black & White) G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    $230













    Busse Combat Battle Grade Active Duty .195" Saber Ground Black Crinkle Blade, Textured Orange/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .195" Blade Thickness 6.3 Ounces
    .195" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Orange/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    $230













    Busse Combat Battle Grade Active Duty .185" Saber Ground Tanker Grey Blade, Textured Orange/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.8" Overall Length 1.05" Blade Width .185" Blade Thickness 6.3 Ounces
    .185" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Orange/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    $230













    Busse Combat Custom Shop BAD Boney Active Duty .135" Flat Ground Satin Blade, Full Blue/Black Mammoth Tooth Handle w/White Liners & Mosaic Pins
    Boney Active Duty - BAD
    3.55" Blade Length 7.8" Overall Length 1.05" Blade Width .135" Thickness 5.2 Ounces
    .135" Flat Ground Satin Finished Blade with Blended Convexed Edge
    Custom Hand Smooth Full Blue/Black Mammoth Tooth Handle w/White Liners & Mosaic Pins
    INFI Blade Steel at 60-62 RC
    The Boney Active Duty was introduced by Jerry Busse in 20084 and has since been discontinued. The BAD Boney Active Duty made by Busse Combat to have a thinner blade using INFI Steel that is thinner at around .14" thick with a higher Rockwell Hardness. With a higher rockwell hardness it will stay sharper for longer periods of time with use without having to sharpen as often. The Boney Active Duty was only made in a small run in certain color combinations in 2008 and has long since been discontinued! There were not may of this model made with beautiful handles on this one. As you can see from the pictures, this is a "One of a Kind" and a lot of time, energy and thought went into making this beautiful knife with the Custom Hand Smooth Full Blue/Black Mammoth Tooth Handle finished off with White Liners & Mosaic Pins. The Flat Ground Satin Blade with the Blended Convexed Edge is Razor Sharp! This is New, never used, carried or sharpened. This knife is from my personal collection and kept in a safe for the life of it's life.
    $1100













    CS323 Busse Combat Custom Shop S.L.U.T. Active Duty .22" Deep Hollow Satin Blade, Black G10 G-rexed Green Mammoth Tooth w/White Liners & Mosaic Pins
    Active Duty S.L.U.T. Super Lightweight Ultra Thick
    3.55" Blade Length 7.85" Overall Length 1.05" Blade Width .22" Blade Thickness 5.7 Ounces
    Hand Ground Full Height Deep Hollow Ground Satin Finished Blade
    Custom Hand Smooth Black G10 G-rexed Green Mammoth Tooth w/White Liners & Mosaic Pins
    INFI Blade Steel
    This is Brand New directly from the 2011 Spring Knob Creek Show in KY.
    This is Brand New as directly from Busse so it was never used carried or Sharpened! The Active Duty knives were introduced in 2002 and have since been discontinued. This S.L.U.T. was introduced in 2011 and than was discontinued right away but never was a production knife since a few were made for the Ganza and two knife shows. This has a Deep Hollow ground and this one weighs 5.7 ounces because a lot of steel was removed from this model but the handles are thick. The handle are hollowed out while the blade has a super sharp Deep Hollow Grind. This has an incredible feel in the hand because of the thickness of the blade! This one is made of INFI Steel. This one is new and custom made by hand by the Busse Custom Shop, a RARE Super Find since there were only a handful made with custom handles. This one has Black G10 G-rexed Green Mammoth Tooth finished off with w/Mosaic Pins & White Liners and each one is hand custom made by the Busse Custom shop. Each piece of the matched set of Mammoth Tooth is different so each one is "One of a Kind"! As with all Busse Combat knives, this carries a Lifetime Warranty for the life of the knife from Busse Combat! This is Brand New, never used, carried or sharpened and comes from my own personal collection.
    $1300













    CS487 Busse Combat Custom S.L.U.T. Active Duty .22" Deep Hollow Satin Blade, Full Mammoth Ivory Bark w/Natural Cracks, Black Canvas Micarta Liners & Mosaic Pins
    Active Duty S.L.U.T.- Super Lightweight Ultra Thick with Skeletonized Handle
    3.55" Blade Length 7.8" Overall Length 1" Blade Width 4.1 Ounces
    Hand Ground Full Height Deep Hollow Ground Blade
    Custom Hand Smooth Full Mammoth Ivory Bark w/Natural Cracks, Black Canvas Micarta Liners & Mosaic Pins
    INFI Blade Steel
    This is a true custom and Ultimate Grail for a Busse Collector and impossible to get. The Active Duty S.L.U.T.- Super Lightweight Ultra Thick was introduced in 2011 at a the A.G. Russell Knife Show and than for one Ganza. It has never been made again so will be very hard to get. These were only avil with canvas micarta or G10 handles when you can order them in the Ganza. So this one is very special and you can see by the pictures there was a lot of time and work that went into the making of this knife! It has a Deep Hollow ground and this one weights 4.1 Ounces. This has an incredible feel in the hand because of the thickness of the blade compared to the super sharp deep hollow grind! The particular knife was purchased by me directly from Busse Combat and is from my own personal collection. Completely one of a kind with custom Mammoth Ivory Bark Handles finished off with Mosaic Pins. This is Brand New, never used, carried or sharpened.
    $1300













    Busse Combat Battle Grade Active Duty .185" Saber Ground Tanker Grey Blade, Textured Red/Black G10 Handle
    Active Duty - AD
    3.6" Blade Length 7.75" Overall Length 1.05" Blade Width .185" Blade Thickness 6.3 Ounces
    .185" Blade Thickness Saber Ground Blade with a V-Ground Edge
    Textured Red/Black G10 Handle
    SR101 Blade Steel
    This knife was introduced were available for sale on 8/26/15 and were sold out on 9/1/15. These have been discontinued and will not be made again!
    The Active Duty was introduced in 2002 by Jerry Busse and has been one of the most popular models but has been discontinued. There have been many different versions of this model all of which are discontinued. Most of the price were good when the knife was introduced but because of the high demand, has grown to be more of a collectible at the secondary market price so Jerry decided to make a version that people would use it and not have to pay too much. So using pretty much the same design, he used the SR101 steel and coated all of them. These are priced much more reasonable so that most can afford these and actually not feel bad for using them. This is Brand New, never used, carried or sharpened.
    $230

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Busse SS Active Duty
    By Porcupinemtns66 in forum Knives For Sale/ For Trade
    Replies: 0
    Last Post: 10-10-2012, 04:23 PM
  2. Replies: 8
    Last Post: 03-01-2011, 11:33 AM
  3. Busse LE SFNO #25 + Busse Boney Active Duty
    By Str8ShooterEsq in forum Knives For Sale/ For Trade
    Replies: 15
    Last Post: 05-11-2010, 08:40 PM
  4. Busse active duty
    By EdAz in forum Knives For Sale/ For Trade
    Replies: 6
    Last Post: 12-11-2009, 06:53 AM
  5. Busse BAD Active Duty Blue G10
    By remyjoeboxer in forum Knives For Sale/ For Trade
    Replies: 1
    Last Post: 08-31-2009, 02:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •