Results 1 to 6 of 6

Thread: Walther Brend, Extream Ratio, Kershaw, Buck etc...

  1. #1

    Walther Brend, Extream Ratio, Kershaw, Buck etc...

    Asking price does not include shipping or insurance due to size, weight, destination, and amount insured for but feel free to email me for shipping quotes and include your complete mailing address at liukang187@yahoo.com with any questions or if you want specific pictures taken.
    You can contact me for payment info. I am willing to ship to different countries as long as you take the risk and pay additional for shipping. I am not responsible for international shipments even though I have never had any problems. Check my feedback.
    If you are thinking about offering me a trade, please get me a description of what you want to trade me, along with the condition it is in (new, used, carried, scratched, sharpened) and pictures to my email and I will let you know. I reserve the right to refuse sale to anyone without any explanation at all.












    Kershaw Tilt DLC 4001 #126 Vavax75 Blade, Carbon Fiber Scale, Titanium Frame-lock
    Specifications:
    Closed Length: 5.5"
    Blade Length: 4"
    Weight: 4.8 oz.
    Blade Steel: DLC Vanax 75 cutting edge 60-61 RC; 420
    Serial Number #126
    This is a the last one, BRAND NEW IN BOX WITH PAPERWORK!. The blade is flat on this particular knife as you can see in the picture. I picked this one out for myself but I'm going to let this go now. The blade is centered and has early lockup, centered blade with smooth opening action. The pictures are of the actual knife being sold.
    $850













    Kershaw Tilt DLC 4001 #173 Vavax75 Blade, Carbon Fiber Scale, Titanium Frame-lock
    This is a pre-owned knife so I will be listed this as used even though I can't find any signs of use. The pictures will speak for themselves. This comes with factory box and paperwork. The blade is flat on this particular knife as you can see in the picture. The blade is centered and has early lockup. The pictures are of the actual knife being sold.
    $800 Sold Pending Funding








    Kershaw Bump Limited Edition
    Specifications:
    Blade Length: 3.5 in.
    Blade Steel: S30V stainless steel
    Handle Material: 6AL4V titanium
    Knife Type: Folding Framlock
    Length Closed:4.5 in.
    Length Overall:8 in.
    Weight: 4.6 oz.
    I have one in each color, these are all numbered because they are limited editions. These are new and each comes with box and sheath along with paperwork.
    Green Titanium Handle #175 $270









    Kershaw BOA 1580ST KEN ONION
    $150




    Kershaw Centofante Onion Stainless Black
    New in box with paperwork and sheath/clip. $50





    BUCK SPECIAL B 119 100 YEAR ANNIVERSARY KNIFE NEW, New in Box
    $100







    Extrema Ratio Ultramarine Knife
    Total length: mm 298 (11.73 inches)
    Blade length: mm 150 (5.91 inches)
    Overall Length Including Sheath: mm 320 (12.60 inches)
    Overall Thickness Including Sheath: mm 55 (2.17 inches)
    Weight: g 375 (13.28 ounces)
    Blade Thickness: mm 6.3 (0.25)
    Blade Steel: Bohler N690 stainless steel, X105CrCoMo182
    Serrations: Partially serrated blade
    Handle: Polyamide (Nylon)
    Sheath: Double sheath
    Diamond Sharpener: Yes
    ADDITIONAL INFORMATION:
    Comes with two diamond sharpeners: one is for the blade and the other is for the net cutter.
    To protect the Ultramarine from damage when not in use, a flap is incorporated to cover both the sheath and the knife.
    A strong pull will allow you to disable the O-ring and the retention system.
    For entanglement emergencies, the Ultramarine incorporates a specialized net and line cutting system.
    New with case, $650
    Last edited by Liu Kang; 05-21-2013 at 10:24 AM.

  2. #2















    Walter Brend WB#2 Serial #0038
    BLADE: 154-cm, .148" Thick
    OVERALL LENGTH: 9.19"
    LENGTH CLOSED: 5.15"
    BLADE LENGTH: 4.04"
    BLADE FINISH: Anopeen
    HANDLE THICKNESS: 0.48"
    HANDLE HEIGHT: 1.38"
    HANDLE: 6/4 TITANIUM BLASTED FINISH
    CLIP: TITANIUM
    INTREGAL HANDLE LOCK
    DOUBLE ACTION: (REMOVABLE LEAF SPRING)
    WEIGHT: 5.8 OZ APPROX.
    Brand new Walter Brend WB#2 which is New older knife. Come with box, sheath, paperwork and tool. The screws, button and clip are all polished. It fires hard and locks up firm. If you choose to open it manually, it's still super smooth. This one is number #38 also on the spine of the blade.
    $650
    Last edited by Liu Kang; 04-01-2013 at 10:14 PM.

  3. #3












    KERSHAW STEVEN SEAGAL 1680
    Edge: COMBO
    Length Closed: 5.0"
    Blade Length: 3 5/8"
    Blade Material: AUS8A Stainless
    Handle Material: Anodized Aluminum
    Locking Method: Integral Liner
    Clip: Yes
    Weight: 5.5 oz
    New in Box with Factory Paperwork
    $230










    Kershaw Leek 1660 Damascus Blade
    New in Box with bag and paperwork.
    This has never been used, carried or sharpened.
    $250






    Kershaw Damascus from Solingen Germany Limited Edition #608
    This knife was made by Manfred Sachse in Solingen, Germany. This knife comes complete with leather sheath. The blade is hand forged 320 fold pattern-welded (damascus) steel. The hilt is hand carved indian Sambar stag antler. The entire knife is brand new it was made on 4-30-86 but has been kept in box in a smoke-free home, oiled regularly, and has never been used (original edge!!!)
    Framable Kershaw certificate reads:
    "THE DAMASCUS STEEL STORY"
    "The distinctive pattern of this Damascus steel knife is hand-forged in Solingen, Germany, using a process dating back to the steel swords of the Middle Ages.
    There are only a few knife makers in the entire world who have the talent to create this same kind of metallurgical art. Mr. Manfred Sachse, of Solingen Germany, is one of this rare breed.
    The blade of the Kershaw Damascus Knife is a lamination of 320 layers of iron and steel. To accomplish the lamination, glowing iron is hammered and folded 320 times, producing a marbled blade many times the strength of a single piece.
    The blade is then heat treated to a Rockwell hardness of C55-56 and dipped in acid that eats away the iron from the surface. It is this process that brings out the wavy layered grain in the steel. Like fingerprints no two are the same.
    Solid core indian Sambar stag horn is used to hold the blade tang.
    Each knife is serial numbered and Mr. Sachse will make fewer than 500 of these knives each year. The card that accompanies this knife shows the serial number, the date of manufacture and his signature.
    Each knife is guaranteed to be perfect.
    Pete Kershaw, President"
    $500
    Last edited by Liu Kang; 05-02-2013 at 06:22 PM.

  4. #4




    ESEE-RC-4 Black Plain Edge Blade, Black Canvas w/Green Liners
    New with sheath, paperwork and all Hardware $120 Shipped within the 48 states







    Bark River Knives: S-T-S - 5 Fixed Blade Survival / Bushcraft / Military / Tactical / Fighting / Outdoor / Knife w/ MIL Spec Camo G10 Handle (Matte Finish) & Satin Blade
    This will come with a $60 optional Brown Leather Bark River Sheath - STS 5 Brown Right
    $250

  5. #5



    KERSHAW OCC ORANGE COUNTY CHOPPERS BLUR SPEED SAFE KNIFE #1670OCC
    $100

  6. #6

    Boker Infinity
    4-3/4" Closed LinerLock Pocket Knife
    3-3/8" Black Ceramic Drop Point Blade
    Thumb Stud and Stainless Steel Pocket Clip
    Black Zytel Handles with Kraton Insert
    Has The RAZOR SHARP Edge That Only Ceramic Blades Can Offer!
    New in box. $150





    Kershaw Sapphire 1450
    Blue Anodized Titanium Handles (plastic is still on one side)
    AUS8 Blade
    Model #1450
    New In The Box
    $75





    Kershaw Leek 1660NC2 Rusty Wallace Knife
    $55

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Extrema Ratio, Buck/Strider, ZT, etc.
    By PassinBy in forum Knives For Sale/ For Trade
    Replies: 5
    Last Post: 05-20-2011, 10:42 PM
  2. Buck Vantage Pro, customized Protech Brend 3
    By FriskyDingo in forum Knives For Sale/ For Trade
    Replies: 4
    Last Post: 04-20-2011, 02:53 PM
  3. Fs/Ft Kershaw, Brend Boker
    By holyman in forum Knives For Sale/ For Trade
    Replies: 5
    Last Post: 02-12-2009, 02:23 PM
  4. WTT Benchmade, ZT, Kershaw, Buck
    By natpro7420 in forum Knives For Sale/ For Trade
    Replies: 0
    Last Post: 06-14-2008, 12:00 AM
  5. Kershaw, Buck/Strider, Buck
    By trimcut123 in forum Knives For Sale/ For Trade
    Replies: 2
    Last Post: 06-06-2008, 11:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •