First "I'll take it" via email gets it. I only accept Paypal but I will waive the fees. Price does not include shipping or insurance because of different shipping locations, value insured, size & weight. I will only ship insured and only to CONUS & CAN. Please email me for shipping quotes with your full mailing address. Not interested in trades at this time. I work shift work, mostly nights, so I might not respond right away..
#1 Custom Ranger by Justin Gringrich has never been used. Knife was left a little rough in an attempt to make it look aged. I polished the edge and went with a lighter patina. My picture taking skills are poor as this knife looks way better in person. The pic of the handle is one I took outside this past summer and gives a better view of the knife. The other pics are washed out because of my poor interior lighting conditions. If you want to wait until June I can get some more pics outside. lol
Justin Gringrich Ranger Custom $370.00 $350.00
*Steel: 5160 Flat Ground Triple Tempered 58HRC
*Blade Length: 8.25"
*Blade Thickness: 0.25"
*Overall Length: 13.5"
*Blade Finish: Patina
*Handle:
- Midnite Tiger G10 Scales
- Brass Flared Hollow Tubes
- Brass Liners
- Black Liners
*Sheath: Leatherface Kydex Drop Loop
#2 M.U.C.K by Daniel Koster as received from Dan. Brand new never used or sharpened. Photos are a little washed out.
Koster M.U.C.K Sold
*Steel: CPM 3V Flat Ground with Swedge
*Blade Length: 6"
*Blade Thickness: 0.1875"
*Overall Length: 11.5"
*Handle:
- Sand Blasted Black Canvas Micarta
- SS Pins
- Red Liners
- Pommel Striker
*Sheath: Koster Kydex Drop Loop
#3 Nessmuk by Daniel Koster. Bought this one used. The choil was ground down to resolve finger biting when choking up on the blade. I have rounded out the edges on the micarta scales for a more comfortable grip and I have sharpened & polished the edge.
Koster Nessmuk Sold
*Steel: CPM 3V Scandi Ground
*Blade Length: 5.25
*Blade Thickness: 0.125"
*Overall Length: 9.5"
*Handle:
- Green Canvas Micarta Scales
- SS Pins
*Sheath: Leather Drop Loop Pouch
#4 SR-1V received from LionSteel about a week ago. Brand new in box, never carried or sharpened.
NIB* LionSteel SR-1V [/B] [/B] Sold
*Blade Steel: Sleipner 60-61 HRC
*Blade Length: 3.7"
*Blade Thickness: 0.177"
*Overall Length: 8.3"
*Blade Finish: Satin
*Handle:
- Titanium Monoblock
- Anodized Violet
*Lock Mechanism: Titanium Frame Lock with RotoBlock system
*Opening Method: Ambidextrous Dual Thumb Stud
*Pocket Clip: Removable, 2 Positions Tip-up, Left or Right
*Weight: 7.3 oz
#5 Strider AR has been carried off and on over the past year. It has only been used to cut paper and cardboard. The scratches in the blade finish happen the first day I got it when I put it on my Edge Pro without any painters tape to protect the finish…D’oh! Pics make it looks worse than it is because at certain angles you can’t really see the scratches in the finish...at least not as pronounced as they are in the pics. Primary bevel has been taken down to 12 degrees per side and has been polished to make it a great slicer. I also have a PSD Spanner Bit Deluxe for an extra $20.00 with the knife.
Strider AR Tri-colored G-10 Withdrawn
*Blade Steel: S30V Stainless Steel 58-60HRC
*Blade Length: 4"
*Blade Thickness: 0.190"
*Overall Length: 9.375"
*Blade Finish: Tiger Stripe Finish
*Handle:
- Contoured & Textured Tri-colored G-10
- Titanium Liners
*Lock Mechanism: Titanium Liner Lock
*Opening Method: Ambidextrous Dual Thumb Stud
*Pocket Clip: Removable, 2 Positions Tip-up, Left or Right
*Weight: 9 oz
#6 Zero Tolerance ZT0300-USN Edition. I work in a prison and this one has been carried at work but only a couple dozen times at the most. The toughest thing it would have cut would be leather belts, rolled up bedding or clothing but I don't think I have cut down any suicide attempts with this knife so more than likely it has only cut paper and cardboard. Finish is almost perfect. There are a couple of tiny hair line scratches that I am unable to photograph because you need to catch the light just right to see them. I have a tripod ordered so I should be able to get pics when it shows up if anyone really wants to see. The knife has been sharpened but I always do this with any knife I am going to use because I often find the primary bevels don’t match and on thick knives I like to thin them out a bit. I think I set the primary bevel to 15 degrees per side.
Zero Tolerance ZT0300-USN Edition SOLD
*Blade Steel: S30V Stainless Steel 58-60HRC
*Blade Length: 3.75"
*Blade Thickness: 0.156"
*Overall Length: 8.75"
*Blade Finish: Extra Fine Bead Peen
*Handle:
- 3D Machined Black G10
- 3D Machined Titanium Slab
- Micarta Back Spacer
*Lock Mechanism: Solid Slab Titanium Frame Lock with Hinder Lockbar Stabilizer
*Opening Method: Ambidextrous Dual Thumb Stud or Flipper
*Pocket Clip: Removable, 4 Positions Tip-up, Tip-down, Left or Right
*Weight: 8.6 oz
Reply With Quote
Bookmarks