WIP thread... the mega Sienna

**Chris Daigle** · 02-06-2010, 04:50 PM

OK LaBella, you win. Here is my WIP of my latest folder, the Sienna. I've scaled it to three sizes, this being the largest.

No fancy equipment in my shop. All is done by hand with manual equipment.

The customer sent a Commander as a go by in terms of size. He asked to enlarge from that a bit.

The blade:

Some have already seen this, so sorry if you find it boring.

**Chris Daigle** · 02-06-2010, 08:57 PM

And here it is profiled next to the smallest of the model. The megga is CPM 154CM and the mini is stainless damascus.

**1Zach1** · 02-07-2010, 01:45 AM

MOAR!!!!

**Chris Daigle** · 02-08-2010, 11:35 PM

Handles are .95 Ti... profiled, drilled, tapped etc.

**Mr.LaBella** · 02-09-2010, 05:34 AM

Keep up the good work Daigle, Sir!

**M.Olexey** · 02-09-2010, 08:50 PM

That is gonna be DAMN cool

**Chris Daigle** · 02-10-2010, 07:54 PM

Thanks guys.

Next step was to drill and tap some holes and shape the bolsters. If they look thick now, that's because they are. The steel was supplied by the customer and he was fine with half being taken off. You'll see why.