Balibalistic Balisong for other custom Balisong

**rangerover_95** · 10-11-2009, 03:26 AM

I have a balibalistic(Shaun Greacen) custom IKBS balisong for trade. I recieved this new about a month ago, and have flipped it lightly. There are a couple of marks on the latch, as to be expected, but there are no other handling marks.

Tip is still perfect, edge is razor sharp.....

It has thick Ti liners, and black G10 overlays. There are two mosaic pins on the bite handle, and it is about 1/4" larger than a BM 42 in both blade and handle.

It flips great, super smooth, with as minimal blade play as it gets. Shauns wait list is at least a year long at this point, get your opportunity at a really rare one. He never makes the same model twice!!!

Here are his specs:

Blade: ATS-34 .157" thick
Liners: TI .95" thick
Overlays: black G-10
Spacers: ATS-34 hardened
Latch: TI
IKBS powered!

Kind of a modified sheepsfoot profile. OAL is 9.8" with 4" of cutting edge and blade length is 4.4".so a bit bigger then usual.i added a couple mosaic pins to the bite handle to add some flavor Tang is shaped just like a spade.Zero blade play and swings like a champ!!

I have pics of the latch if you're truely interested in trading. Again, the latch is the only area of wear on the knife.

I am really set on an IKBS knife, preferrably a Korth. I am not looking for a really artsy bali, just something that flips sweet. Trade value on this knife is $425.... Email me at rangerover_95@hotmail for fastest response, or PM me here!

Thanks Devilz!!!

**rangerover_95** · 10-12-2009, 03:37 PM

Btt

**rangerover_95** · 10-13-2009, 02:51 PM

I might be persuaded by a couple of the right Benchmade Balisongs (especially if there is a 43 in there)

**purpledc** · 10-13-2009, 09:57 PM

email sent

**rangerover_95** · 10-14-2009, 03:14 AM

Email replied to. I have found the Korth that I have been looking for! Trouble is that now I need to sell this one for it! I am going to post this one for sale, (priced to move) tomorrow at noon, pending an agreement between myself and an interested party.

I will post all the little minute scuffs on the handles (the ones that you only notice once under a light and are ready to part with the knife) and the latch wear at that time!

Thanks,
Berkely

**rangerover_95** · 10-14-2009, 03:02 PM

Hey there everyone, I have found my Korth! Only problem is that I need to act quickly to pick it up... I am offering my Balibalistic custom for sale, priced to move! I have enclosed the nitty gritty shots of the latch and all the little scratches that flash in the light on the balisong.

This one isnt for you if you're looking for a collector condition balisong, but if you are looking for a new ultimate flipper, this is the one. Heres your opportunity to handle one of the best balis on the market, and forgo the at least 1 year waiting list from Shaun himself.

I recieved this new about a month ago, and have flipped it lightly. There are a couple of marks on the latch, as to be expected, and some light scuffs/scratches near the bottom of each handle

Tip is still perfect, edge is razor sharp.....

It has thick Ti liners, and black G10 overlays. There are two mosaic pins on the bite handle, and it is about 1/4" larger than a BM 42 in both blade and handle.

It flips great, super smooth, with as minimal blade play as it gets. Shauns wait list is at least a year long at this point, get your opportunity at a really rare one. He never makes the same model twice!!!

Here are his specs:

Blade: ATS-34 .157" thick
Liners: TI .95" thick
Overlays: black G-10
Spacers: ATS-34 hardened
Latch: TI
IKBS powered!

Kind of a modified sheepsfoot profile. OAL is 9.8" with 4" of cutting edge and blade length is 4.4".so a bit bigger then usual.i added a couple mosaic pins to the bite handle to add some flavor Tang is shaped just like a spade.Zero blade play and swings like a champ!!

I will take $SPF! OBO on this bali, shipped and insured to your door. It also comes in a padded faux-sheepskin zipper case. If you have any questions, or offers, please either email me at rangerover_95@hotmail.com, or PM me here!!!

Thanks Devilz,
Berkely

**jough** · 10-14-2009, 03:08 PM

PM Sent...

**rangerover_95** · 10-14-2009, 03:27 PM

Still available!!!! Come and get it!

**rangerover_95** · 10-14-2009, 05:12 PM

This one is SPF.......

**RNST** · 10-14-2009, 06:52 PM

My question is why are there two threads for the same knife?

http://www.jerzeedevil.com/forums/sh...ad.php?t=63227

One thread per person in the Sales forum. That applies to all trades/sales/firearms/your pet donkey etc. One thread only.