So KMNREMTP asked me to do a set of knuckle dusters for him and his wife, I figured I'd do a WIP thread to show y'all some photos on how I'm going to make them. I'll probably end up adding some film to this so y'all can see what goes on and how I work in my shop.
KMNREMTP's spec is 2x knuckle dusters, lime green G10 with my logo milled into it. In order to get the width I want on the material, I'm going to use a liminate of G10, with a thin black liner on the inside. When laminated together, the G10 will be just like one solid piece of material... having used this method to make knuckles in the past, I know you can punch a brick wall and it won't affect the G10. In addition I'm going to unlay glow material into the knuckles for my logo. I may try and get some kind of cushioning on the handle too while I'm at it.
The beauty of using G10 for knuckles is it's relatively affordable but totally indestructable.
Pics to come.