J. Neilson
10-29-2010, 10:34 AM
It's good to be busy, busy, busy...
http://www.jerzeedevil.com/gallery/files/1/0/6/4/gentlemans_bowie_5160_ironwood.jpg
This Bowie knife has an 8 1/4" blade of 5160 spring steel with a hand-rubbed finish and a 13 1/8" overall length. The knife has an oval guard and threaded butt-cap of satin finished stainless steel. The handle is Desert Ironwood Burl wood with a throat made up of stabilized blonde Buckeye Burl wood and stainless steel spacers.
http://www.jerzeedevil.com/gallery/files/1/0/6/4/scandi_bushcraft_plus.jpg
This S-B knife is a based on the traditional grind Scandi-Bushcraft knife but, with a bit longer blade. Just over 9 1/2" overall of 1080 high carbon steel forged from 5/32" stock with an approx. 1/4"-3/8" high bevel, flat spine, edge ground to zero then polished and fully hardened blade. The knife above is shown with hand-rubbed finish, handle scales are palm swell style in Butterscotch Canvas Micarta and stainless steel handle bolts and lanyard liner.
http://www.jerzeedevil.com/gallery/files/1/0/6/4/swift_buk_crossover.jpg
These B.U.K. cross-over knives continue to be popular. This combination of the B.U.K. with the "Swift" knife is forged from 1084 high carbon steel, 1/8" thick. The knife is 6" overall with a 2 3/4" cutting edge. The knife has a satin finish and file worked thumb rest. The handle scales are African Blackwood with a pin and lanyard liner of stainless steel.
http://www.jerzeedevil.com/gallery/files/1/0/6/4/gentlemans_bowie_5160_ironwood.jpg
This Bowie knife has an 8 1/4" blade of 5160 spring steel with a hand-rubbed finish and a 13 1/8" overall length. The knife has an oval guard and threaded butt-cap of satin finished stainless steel. The handle is Desert Ironwood Burl wood with a throat made up of stabilized blonde Buckeye Burl wood and stainless steel spacers.
http://www.jerzeedevil.com/gallery/files/1/0/6/4/scandi_bushcraft_plus.jpg
This S-B knife is a based on the traditional grind Scandi-Bushcraft knife but, with a bit longer blade. Just over 9 1/2" overall of 1080 high carbon steel forged from 5/32" stock with an approx. 1/4"-3/8" high bevel, flat spine, edge ground to zero then polished and fully hardened blade. The knife above is shown with hand-rubbed finish, handle scales are palm swell style in Butterscotch Canvas Micarta and stainless steel handle bolts and lanyard liner.
http://www.jerzeedevil.com/gallery/files/1/0/6/4/swift_buk_crossover.jpg
These B.U.K. cross-over knives continue to be popular. This combination of the B.U.K. with the "Swift" knife is forged from 1084 high carbon steel, 1/8" thick. The knife is 6" overall with a 2 3/4" cutting edge. The knife has a satin finish and file worked thumb rest. The handle scales are African Blackwood with a pin and lanyard liner of stainless steel.