- Nice multicolor textured micarta (several pictures)
- Leeds Bowie
- Step-by-step Claw (photo heavy)
- Get it Sharp and Do it Fast.
- JD-EDC Step-by-Step (photo heavy)
- How I like to sharpen knives...
- Cleaning up the hand-rubbed finish on a blade...
- New and improved shop tour
- drinking and shopping for knife parts
- Well here it is...
- Grinding belts
- The end all be all "what grinder should I get" thread
- Setting up a ventilation/exhaust system...
- stencils how bout it
- JD Special Projects Team - project #1
- Static Shocks
- Post em' if you got em' - Shop Tour Pics...
- low cost website
- Blade show/ JD tables
- Leather Stropping - on the cheap
- No more red-bone scales
- Allright, fess up, who's going to Blade.....
- KMG small wheel attachment
- blacking Ti
- Paracord Suppliers!
- Who here is pretty efficient with a Mill or Surface Grinder?
- "Stupid Questions" and How'd they do that?
- Can cable damascus be "fixed"?
- Convexing edges......easier than I thought.
- came up with a new logo ..........
- IS heat treat really the *soul* of the knife?
- Some new grinder add ons.
- hollow grind scratch patteren
- Stamp / logo
- A few hawks in the works
- what does a knifemaker...
- Needs a sheath. any ideas
- Knifemaker wanted!
- sick grind
- some chopping
- What do you think of this handle?
- A Newcomer
- I almost never mess up...
- Working with carbon fiber
- Grinding..do you use some sort of holding device or angled rest ???
- Tried damascus, struck out???????
- Getting ready for Blade........
- white mycarta in my shop (folder)
- first damascus by myself
- O-1 and snakewood
- Poor mans damascus
- some close ups
- eating steel dust...
- Fruit salad can forge
- finished Border Patrol Knife
- engraving stamp size and ?
- Bone Head Move
- Blade Question
- Nessmuk ?
- New Jersey Knife making laws
- Steel Info
- knives in the works
- American flag micarta "Amermicarta ?"
- grinder on ebay
- Working with mammoth ivory
- my first little work-skinner knife
- How do you knifemakers grind bevels on the spine tip???
- scrap booking
- my mom said Cable is bad for you ! she's never seen our cable
- Buck 110 Mod Question...
- Silly question.....
- all nighter
- classes
- All Done Headin' for Blade on Monday!
- need advise on brass or SS pins
- Got Wood
- My name is Pete and I'm a wanna be!
- bolster or no bolster ?
- bowie heven or hell I don't know ?
- Source for non-standard size brass washers?
- RING MAKER
- white tail
- cable bowie just finished
- Warming up for
- A vise for the shop...
- I am just full of questions
- Finished field knife
- stellite 6K
- JD Collaboration
- Carbon Fiber versus G10
- Dry Ice Cryo
- Explosive Bonding Damascus
- What's your experience with A-2 for blades?
- SHop Tour on my Website
- Drilling Mammoth
- Tanto: aikuchi or hamidashi?
- Need advise on mounting to uneven surface
- DELTA SHOPMASTER belt/disc ?
- How to prep a file for
- What better the old wrought for fittings
- Has anyone read Master Bladesmith advanced???
- CCF
- $100 ANODIZER
- Viperkiller's Sidewinder in progress
- Building A Anodizer
- Working on something new
- JD Challenge!
- Micarta Source
- Best places to buy G10
- Old camera's dying gasp
- Mayham W.I.P
- Finally did a Shop Tour
- knife steel sources
- Mirror Polish... How to?
- 3D scan to CAD
- Etch damascus after electro-etching logo?
- 1064/1095
- Blade replacement
- GALALITE ? polyester ???
- The pix suck but not the knife
- Saftey first{graphic image}
- Immediate scrimshaw help needed!
- Mill for Inlays?
- Gold Twill G10?
- Tutorial "how to make a full tang"
- Dive Knife
- Whats up in my shop...
- Stonewash finish, debur experiment
- On my bench..
- Replacing Scales
- Matched Set WIP
- I need a good garage vacuum system
- Drilling tungsten molybdenum?
- just keeping busy
- Where to buy sharpening gear for straight razors
- Lines in the blades
- Finally put a handle to it.
- I need a new grinder
- 2 questions
- Gimme some Input
- Contact wheel question
- Stebbins Knife Construction Methods (Link)
- *NEW* JD Challenge!
- New furnace
- Question for Tracy
- D2 blade ready for heat treat
- any reputable people to sharpen knives in N. illinois?
- triax-sharpeners
- Stabilized Woods
- Handle Screws
- A Computer in the Shop
- Nothing
- inexpensive but decent grinder suggestions?
- decided to give sharpening one more go
- Oct. WIP
- Carbon fiber question
- Cone lock Grinder
- cpm10V Ti frame lock flipper?
- Nickel Silver
- Ghost Green Jade scales
- Translucent Ghost Green Jade scales.
- Where can I get one of those devil tail pocket clips?
- Hammer-In Nov 8th, Katy, TX
- Lignum Vitae
- HT for 440C
- Heat coloring SS .070
- Shop pics
- my new KMG
- Belt recommendations
- Sherline mill?
- Anybody have any pink G10?
- JD letter opener
- Some Scrimshaw from Shock06
- MSDS
- Carved handle texture
- is this really w-2
- Ceramic platen liner question
- Any Woodcarvers here?
- ABS plastic
- one of those dam days
- Tell me what you think!
- A Proper Lanyard
- The Monkey Fist
- Dirtiest workshop
- dual control blown forge
- I have a Custom knifemaker friend
- Using Min-Wax Hardener
- need help from pro's
- handle sealing
- African Black wood
- Handle slabs
- What am I doing wrong
- Advice on 2x72" belt grinders
- Grizzly Grinder question
- supplies in Phoenix area??
- A blade question
- Sealer
- KME sharpening system
- Tired of seeing chainsaw damascus? Think again!
- Some FOBs by me
- etching my mark ? need help
- Makers: how do you schedule your orders?
- sparking various ferro rods - how to
- how do i darken nickel,silver
- Excited about 2009
- Mammoth tooth- availability soon to be ended?
- Silver and Gold
- What Kind Of Wood Is This?
- how to sharpen my d2 ka bar?
- Interesting Project
- JD Challenge Martin Knives-Egnath
- I'd like to take a poll of all the knife makers on JD
- THE OFFICIAL un-OFFICIAL JD DICTIONARY
- Laminate thickness poll
- Silver Vine?
- 1095 and I need help
- Test knife
- san mai question
- Lawn Mower Blade
- 5160
- Milling Liners
- Stress Relieving 5160
- working half sick (pics)
- MARLAP and Bumble Bee Skin
- starting out on #2 and #3
- Any Devil's make etching stencils?
- Apprenticeships?
- Bolsters on a Folder
- How To: Make A Knife Vise
- bubba's baby tanto's
- 52100 san mai...should i finish it?
- what size hole in a folder blade for the pivot?
- O-1
- Jerzee Devil New Challenge
- big is good!
- Work in process - advise please
- Precision File Guide
- Carbon Fiber Handle Material
- Learning from Babba-san
- How to cut a nail nick ??
- Rubberized coating for handles
- Stablized Wood
- Forge plans
- Light at the grinder...
- new file knife
- Rubber handle
- need anodizer and laser etch company
- My New Forging Press
- Buffing handles ?
- Epoxy Questions